矿井设备选型及供电系统设计

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

. .

页脚. 摘要

煤炭是我国主体能源,是能源安全的基石,摸清煤炭的资源储量,评价煤炭资源储量开发利用前景,有利于我国煤炭工业规划的制定,有利于煤炭资源节约保护和合理开发利用。随着煤炭工业的现代化,综采工作面机械化程度越来越高,综采工作面机电设备容量不断增大,机械化程度的提高,为加快工作面的推进速度,提高生产率,对煤矿电气设备有了更高的要求,同时煤矿运行的生命线就是电。本次设计主要是为呼伦贝尔市扎赉诺尔区灵露矿进行井下综采工作面设备选型和供电设计,设备选型以主要设备为主,通过选型负荷来确定井下供电系统,合理的选型不仅为工矿安全打下了结实的基础,而且在经济效益上也有显著提升。

关键词:

采煤机刮板输送机负荷统计变压器整定保护

. .

页脚. Abstract

Coal is the main energy in China, is the cornerstone of energy security, find out the coal resources reserves, the exploitation and utilization of coal resources and reserves evaluation of prospects, conducive to the development of China's coal industry planning, is beneficial to saving the protection and rational development and utilization of coal resources. With the modernization of the industry, fully mechanized working face of increasingly high degree of mechanization, capacity of electromechanical equipment in fully mechanized mining face is increasing, the degree of mechanization raise, to speed up the working face advancing speed, improve the productivity, there are more requirements on the coal mine electrical equipment, at the same time the lifeline of run of mine coal is electric. This design is mainly for the Inner Mongolia Hulun Buir City District of Zhalainuoer dew mine fully mechanized mining face underground equipment selection and power supply design, selection of equipment to the main equipment, to determine the underground power supply system through the selection of load, the reasonable selection for the industrial and mining safety not only laid a solid foundation, but also a significant increase in economic benefit.

Keywords:

Shearer scraper conveyor load statistics of transformer protection setting

. .

页脚. 目录

摘要.............................................................. I Abstract ......................................................... II 绪论.. (1)

一、课题背景 (1)

二、课题意义 (1)

三、课题来源.................................................................. .. (1)

第1章矿井基本概况 (3)

1.1矿井基本概述 (3)

1.2矿井煤层情况 (3)

1.3设计方案确定.................................................................. .. (4)

第2章井下主要设备选型设计 (5)

2.1滚筒采煤机的选型 (5)

2.2 液压支架的选型 (9)

2.3刮板输送机的选型 (12)

2.4 胶带输送机的选型 (15)

2.5乳化液泵站与机的选择 (19)

2.6喷雾泵站与破碎机水泵的选择 (19)

第3章矿井供电系统设计 (20)

3.1 矿井供电简介 (20)

3.2 采取变电所位置的确定 (21)

3.3 拟定采区供电系统的原则 (22)

3.4 采区主要设备 (22)

第4章采区变电所设备选型 (24)

4.1 采区负荷计算及变压器容量台数确定 (24)

4.2 电缆型号及长度的确定 (26)

第5章采区电气设备选择校核 (34)

. .

5.1 采区高压开关柜的选择 (34)

5.2 矿用低压隔爆开关选择 (34)

5.3 真空磁力起动器的选择 (35)

5.4 保护装置的整定计算 (36)

第6章采区低压短路电流的计算 (38)

6.1 综采工作面短路计算图.................................................................. . (39)

第7章井下照明、信号 (40)

7.1 井下固定照明 (40)

7.2 采区接地保护措施 (41)

结论.................................................................. .. (43)

参考文献.................................................................. (44)

致 (45)

附录.................................................................. .. (46)

(图纸另附)

页脚.

相关文档
最新文档