HMR3500中文操作手册
3500系列_中文手册
1.13.3 程序概要页 .................................................................................................... 29
1.13.4 报警概要......................................................................................................... 31
2.
2.1.1 2.1.2 2.1.3 2.2
第 2 章 访问更多的参数 .................................................33
等级 3（Level 3）......................................................................................... 33 配置等级......................................................................................................... 33 选择不同的访问等级................................................................................... 34 访问菜单中的参数 .........................................................................................35
1.1 这是什么样的仪表? .........................................................................................9
3500 操作手册
SIMS Graseby 有限责任公司 Watford， 赫特福德县， 大不列颠联合王国，
WD2 4LG
电话 传真
（＋44）（0）1923 246434 （＋44）（0）1923 231595
英国注册，注册号：995550
ⅰ
1
麻醉注射泵 简介 小心和警告
2
首先感谢你选择 Graseby 3500 麻醉注射泵。这本仪器使用手册包含操作和保养你所购买的麻醉注射泵的所有重 要信息。为了完全熟悉该仪器的所有特征，请在使用前仔细阅读这本手册。
预先装充 Diprivan 的针管是专门用来注射药物‘Diprivan’(D)的
Graseby 3500
7
麻醉注射泵
美国及加拿大用户使用关注
美国和加拿大联邦法律规定该仪器只能由得到许可的或与之类似的医学营业者进行销售。
FDA 所需应用信息
应用在脑膜上请注意： 1. 该仪器可用于止痛剂的输入。 2. 注射根据导管大小和药物说明可分为短期或长期。 3. 使用指定用于脑膜给药的导管。 4. Y 连接点注射设定不能用于脑膜给药。 5. 该仪器只能注射在药品标签上声明可用于脑给药的止痛药。
Graseby 3500
目录（接上） Graseby 3500
麻醉注射泵
第五章
警报
页码 简介………………………………………………………………………………………………………………………5-1 紧急警报…………………………………………………………………………………………………………………5-2 柔和警报…………………………………………………………………………………………………………………5-9 静音警报……………………………………………………………………………………………………………… 5-12 TCI 警报 ……………………………………………………………………………………………………………… 5-16
OTC 使用说明书(M-3500(VRCM-35))
使用说明书ＶＲＣＭ－３５使用说明书编号VRCM-35 P30054１２－８－０２９本产品带入欧盟各国时的注意事项Notice : Machine export to Europe本产品不符合自1995年1月1日开始执行的欧盟安全条例――EC指令的要求。
1995年1月1日以后，请不要携带本产品进入欧盟各国。
同样的限制也适用于任何已经签署EEA协议的国家。
如果要把产品调迁或转售至欧盟各国及其他签署了EEA协议的国家时，请提前与我们联系。
This product does not meet the requirements specified in the EC Directives which are the EU safety ordinance that was enforced starting on January 1, 1995. Please make sure that this product is not allowed to bring into the EU after January 1, 1995 as it is.The same restriction is also applied to any country which has signed the EEA accord.Please ask us before attempting to relocate or resell this product to or in any EU member country or any other country which has signed the EEA accord.目录1. 安全注意事项 (2)2. 等离子弧切割安全措施 (2)3. 负载持续率 (8)4. 标准构成和附件 (9)5. 控制操作说明 (10)6. 用户注意事项 (11)7. 运输和安装 (12)8. 外部连接 (13)9. 切割准备 (16)10. 切割作业 (20)11. 切割异常 (26)12. 维护和故障检修 (30)13. 零部件一览表 (38)14. 规格 (40)15. 售后服务 (41)- 1 -- 2 -电击可能导致死亡！触摸带电部位可以导致致命的电击或严重的灼伤。
松下 AK-HC3500MC摄像机 说明书
菜单开关
后面板上的背光灯
HD-SDI 输出
菜单拨轮
SD存储卡槽 使用SD存储卡（选件）可以实现 各种摄像机设置的存储与调用， 如用户寻像器指示等。
*推荐使用Panasonic 2GB 或更小容量 的存储卡。不支持 SDHC 存储卡。
RS422/RS232C 双通道数据传输
摄像机/返送/寻像器 HD-SDI 输出可选
松下的CCD传感技术和先进的片上透镜技术，带来了2000 lux照 度下F11的高灵敏度，低拖尾电平和60dB的高信噪比。
松下的单通道传输系统和像素空间偏置技术改进了调制度，并 且降低了摩尔干扰。
[CCD 灵敏度]
传统的 CCD
松下电器的 CCD
100
未进行像素空间偏置 技术的输出信号
进行像素空间偏置 技术输出信号
CCU控制信号 (camera, CCU control) RCP控制信号(fader control) PREVIEW 控制信号(joystick control)
DC12 V (CCU供电) 大约 6 W 0 °C 至 40 °C -20 °C 至 60 °C
92 mm x 60 mm x 385 mm 大约 1.8 kg
系统配置
2" 黑白寻像器 AJ-HVF21MC
ENG/EFP镜头
8" 彩色液晶寻像器 AK-HVF931AMC
多格式数字摄像机 AK-HC3500MC
光缆
下变换板 AK-HDC3500MC
电视风格
色彩校正 12轴独立色彩校正，可以对某一色彩的 色调和饱和度进行精细和独立的调整。
校正后
亮部区域和暗部区域都获得了清晰的重现 电影风格
肤色细节校正
Model 3500 Portable RF Power Meter 说明书
P o r t a b l e , h a n d h e l d R F p o w e r m e t e r f o r f i e l d a n d l a b u s eR F /M I C R O W A V E3500Portable RF Power MeterSPECIFICATIONSFREQUENCY RANGE:10MHz to 6GHz.POWER RANGE:+20dBm to –63dBm.Max. Power:+23dBm, 5VDC.POWER ACCURACY (at 23°C ±5°C):1+20dBm to +6dBm:±0.24dB, 10MHz to 3GHz (characteristic).2±0.16dB, 3GHz to 5GHz (characteristic).2±0.22dB, 5GHz to 6GHz (characteristic).2+6dBm to –9dBm:±0.26dB, 10MHz to 3.75GHz; ±0.07dB typical.3±0.40dB, 3.75GHz to 6GHz; ±0.07dB typical.3–10dBm to –29dBm:±0.26dB, 10MHz to 3.75GHz; ±0.05dB typical.3±0.37dB, 3.75GHz to 6GHz; ±0.05dB typical.3–30dBm to –40dBm:±0.21dB, 10MHz to 3.75GHz; ±0.12dB typical.3±0.27dB, 3.75GHz to 6GHz; ±0.13dB typical.3LINEARITY (at 23°C ±5°C):±0.10dB, +6dBm to –40dBm.NOISE FLOOR:–63dBm.SWR:1.12:1, 10MHz to 3.75GHz. 1.20:1, 3.75GHz to 6GHz.DISPLAY:4 digits, backlight, auto-shutoff, hold—the most recent reading is shown on the display and is no longer updated.UNITS: dBm, milliwatts.POWER (equipped with auto-shutoff):Unit can be powered from any of these methods:Two 1.5V alkaline AA batteries (not included). Typical battery life: 17.5 hours 4; low battery B port 5.Optional DC power supply 6(3500-PWR).SPEED:Normal:~2 readings per second (> approx. –30dBm).~1 readings per second (≤approx. –30dBm).High-speed:~34 readings per second (> approx. –30dBm).~11 readings per second (≤approx. –30dBm).HOST INTERFACE:USB 2.0 interface with a miniature “B” USB connector 7.AVERAGING:1, 2, 4, 8, 16, and 32 averages.CONNECTORS:RF:Type N male RF connector (50Ωcharacteristic impedance).USB: Miniature “B” USB connector.External Power: Power receptacle (connect optional External Power Supply: 3500-PWR).OPERATING CONDITIONS:Operating Temperature:0°to 50°C (32°to 122°F).Operating Humidity:<80% RH at 35°C (95°F), non-condensing.Air Quality:Compatible for use in a Class 10 cleanroom.SWR (typical)31.181.161.141.121.101.081.061.041.021.00S W R (x :1)Frequency (MHz)100020003000400050006000GENERALSTORAGE CONDITIONS:0°to 70°C (32°to 158°F), 5% to 70% RH, non-condensing.DIMENSIONS:79mm ×134mm ×49mm (3.125 in. ×5.260 in. ×1.925 in.), not including N connector.WEIGHT:0.5kg (1.1 lb.).WARRANTY:1 year; 1 year suggested calibration cycle.EMC:Conforms to European Union Directive 89/336/EEC, EN 61326-1.SAFETY: Conforms to European Union Directive 73/23/EEC, EN 61010-1.NOTESExplanation of how we derived our specs:1.Customer Spec = (x,f) + K(=2) · δ(x,f) + ΔE (x,f,[18°–28°C]) + µwhere:= Mean of the data taken in the frequency range stated (x,f).δ= Standard deviation of the data taken in the frequency range stated (x,f).x = Measured value at test frequencies.f = Frequency range over which data was taken for specification.µ= Measurement uncertainty.ΔE = Change associated temperature variation.18°–28°C = Statistics generated separately at these temperatures and larger statistical value used in setting spec.2.Characteristic (or Expected Value): Characteristic indicates performance that a unit would be expected to exhibit under the following conditions:•Ambient operating temperature of 18°to 28°C, unless otherwise noted •After specified warm up time of 30 minutes.•Does not include measurement uncertainty.This performance is not warranted.3.Typical (mean + 3 standard deviations): Typical indicates performance that all units will meet under the following conditions:•Ambient operating temperature of 23°C, unless otherwise noted •After specified warm up time of 30 minutes. •Does not include measurement uncertainty.This performance is not warranted.4.Typical battery life was measured in the default conditions from the factory at 500MHz with backlight off and no USB communications. With backlight on, typical battery life is 2.5 hours.5.With the USB connected and providing power, and the optional external power disconnected, the Model 3500 will be powered from USB regardless of whether batteries are present.6.If the external power supply is connected, the Model 3500 will be powered by the external supply, regardless of whether USB power or batteries are present.7.The interface is USB 2.0 compliant but with an interface speed of 12Mbps.。
Galaxy 3500全线产品用户手册
MGE Galaxy 3500 10-40 kVA 380/400/415 V 和 10-30 kVA 208/220 V 操作手册
i
单个系统和并联系统 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
界面区 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 显示界面 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 菜单树 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3500 手册和产品说明书
DescriptionManuals for the 3500 Series Machinery Protection System provide installation, Array operation, and maintenance information as well as specifications and ordering information. Manuals are available on CD ROM or laser printed on standard 8½" x 11" paper in 3-ring binder format.To order a CD ROM that contains the PDF files of all Bently manuals including 3500, use part number 164823.To order paper manuals in a 3-ring binder, use the part numbers listed in the table below.Datasheets provide specifications and ordering information. PDF files for 3500 datasheets are available at .Ordering InformationProduct Manual Part Number 3500 Field Wiring Diagrams 130432-013500 Galvanic Isolator Interface 141706-013500/05 Rack 129766-01 3500/06 Weatherproof Housing 129766-013500/08 Diagnostics Access Panel 136275-013500/15 Power Supply 129767-01 3500/20 Rack Interface Module 129768-013500/22M Transient Data Interface 161580-013500/25 Keyphasor® Module 129770-013500/32 4-Channel Relay Module 129771-013500/33 16-Channel Relay Module 162291-01 3500/34 TMR Relay Module 129771-013500/40M Proximitor® Monitor 143488-013500/42M Prox/Seismic Monitor 143489-013500/44M Aeroderivative Monitor 143490-013500/45 Position Monitor 135545-013500/46M Hydro Monitor 144403-013500/50 Tachometer Module 134938-013500/53 Overspeed Protection System 134939-01Product Manual Part Number 3500/60 and 3500/61 Temperature Monitors 134542-01 3500/77M Cylinder Pressure Monitor 146282-013500/62 Process Variable Monitor 136973-013500/63 Hazardous Gas Monitor 166848-013500/64M Dynamic Pressure Monitor 142836-013500/70M Recip Impulse/Velocity 166226-013500/72M Rod Position Monitor 146479-01 3500/91 EGD Comm Gateway Module User's Guide 161232-01 3500/91 EGD Gateway Protocol Configuration Manual 167060-01 3500/92 Communication Gateway138629-013500/93 System Display 137412-013500/94 VGA Display 148636-01 3500/95 Integrated PC Display 145169-012004 Bently Nevada LLC。
遗传分析仪简易操作指南
Applied Biosystems 3500/3500 XL遗传分析仪简易操作指南美国应用生物系统公司3500/3500 XL遗传分析仪简易操作指南1 电脑和仪器启动后，待 Daemon，Server Monitor 程序完全启动后，打开 3500 Data Collection 软件，出现 3500 Log In 登录界面，输入用户名和密码，点击“OK”，打开软件。
2 软件主界面如图所示。
耗材的剩余用量耗材的有效日期运行样品1建立新的反应板：登陆3500 Data Collection 软件，进入主界面后，通过 Main workflow（）键进入Set up视窗，选择Define Plate Properties 界面建立新的样品反应板，在Name栏输入样品板的名称，如test，其余选项按图示进行设定。
2 输入样本名称，选择相应的Assays，File Name Conventions，Results Groups：样品名称：切换到Assign Plate Contents界面输入样品名称，如在A1栏输入样品名称为1，选中其余目的栏，使用Fill Series功能添加所需样品名称。
设定Assays：根据需要选择Add from Library，或Create New Assay。
对于AB公司试剂而言，所有程序均已经设定好并存放于Library中，因此可以直接点击Add from Library，然后选择相应的Assays。
设定File Name Conventions：根据需要选择Add from Library，或Create New File Name Convention。
设定Results Groups：根据需要选择Add from Library，或Create New File Name Convention。
设定样品的类型：点击Customize Sample Info进行样品类型的设定。
本特利3500中文说明书
TSI系统调试基本知识本内容将围绕大多数电厂中广泛使用的美国本特利（BENTLY）公司生产的振动检测系统3500为模版，全面讲述系统安装、组态、调试过程及调试中常见问题的处理。
第一节 TSI系统硬件基本知识3500系统能提供连续、在线监测功能，适用于机械保护应用，并为早期识别机械故障提供重要的信息。
该系统高度模块化的设计主要包括：见下图：系统的工作流程是：从现场取得的传感器输入信号提供给3500监测器框架内的监测器和键相位通道，数据被采集后，与报警点比较并从监测器框架送到一个地方或多个地方处理。
3500框架中模件的共同特征是带电插拔和内部、外部接线端子。
任何主模件（安装在3500框架前端）能够在系统供电状态中拆除和更换而不影响不相关模块的工作，如果框架有两个电源，插拔其中一块电源不会影响3500框架的工作。
外部端子使用多芯电缆（每个模块一根线）把输入\输出模块与终端连接起来，这些终端设备使得在紧密空间内把多条线与框架连接起来变的非常容易，内部端子则用于把传感器与输入\输出模块直接连接起来。
外部端子块一般不能与内部端子输入/输出模块一起使用。
1、3500/05系统框架3500框架用于安装所有的监测器模块和框架电源。
它为3500各个框架之间的互相通讯提供背板通讯，并为每个模块提供所要求的电源。
3500框架有两种尺寸：1 全尺寸框架——19英寸EIA框架，有14个可用模块插槽2 迷你型框架——12英寸框架，有7个可用模块插槽电源和框架接口模块必须安装于最左边的两个插槽中。
其余14个框架位置（对与迷你型框架来说是其余7个位置）可以安装任何模块。
2、3500/15电源模块3500 电源是半高度模块，必须安装在框架左边特殊设计的槽口内。
3500 框架可装有一个或两个电源(交流或直流的任意组合)。
其中任何一个电源都可给整个框架供电。
如果安装两个电源，第二个电源可做为第一个电源的备份。
当安装两个电源时，上边的电源作为主电源，下边的电源作为备用电源，只要装有一个电源，拆除或安装第二个电源模块将不影响框架的运行。
华为3500操作手册 装帧
HUAWEI1. 入门2. 端口3. VLAN4. 网络协议5. 路由协议6. 组播协议7. QoS/ACL8. 安全9. STP10. 集中管理11. 可靠性12. 系统管理13. 自动侦测14. 附录Quidway S3500系列以太网交换机操作手册Quidway S3500系列以太网交换机操作手册资料版本T1-081697-20050610-C-1.07BOM 编码31160997华为技术有限公司为客户提供全方位的技术支持通过华为技术有限公司代理商购买产品的用户请直接与销售代理商联系直接向华为技术有限公司购买产品的用户可与就近的华为办事处或用户服务中心联系也可直接与公司总部联系华为技术有限公司地址深圳市龙岗区坂田华为总部办公楼邮编518129网址声明Copyright ©2005华为技术有限公司版权所有保留一切权利非经本公司书面许可任何单位和个人不得擅自摘抄复制本书内容的部分或全部并不得以任何形式传播®HUAWEI®华为®C&C08®EAST8000®HONET®®视点®ViewPoint®INtess®ETS®DMC®TELLIN®InfoLink®Netkey®Quidway®SYNLOCK®Radium®雷霆®M900/M1800®TELESIGHT®Quidview®Musa®视点通®Airbridge®Tellwin®Inmedia®VRP®DOPRA®iTELLIN®HUAWEI OptiX®C&C08iNET®NETENGINE™OptiX™iSite™U-SYS™iMUSE™OpenEye™Lansway™SmartAX™边际网™infoX™TopEng™均为华为技术有限公司的商标对于本手册中出现的其它商标由各自的所有人拥有由于产品版本升级或其它原因本手册内容会不定期进行更新除非另有约定本手册仅作为使用指导本手册中的所有陈述信息和建议不构成任何明示或暗示的担保前言版本说明本手册对应产品版本为S3526-0025/S3526EF-S3526C-0035/S3528-S3552-0017相关手册Quidway S3500系列以太网交换机主要手册及用途如下手册名称用途Quidway S3526以太网交换机安装手册介绍了S3526以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3526E以太网交换机安装手册介绍了S3526E以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3526 FM/FS以太网交换机安装手册介绍了S3526 FM/FS以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3526C/S3526EFM/S3526E FS以太网交换机安装手册介绍了S3526C/S3526E FM/S3526E FS以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3552系列以太网交换机安装手册介绍了S3552系列以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3528系列以太网交换机安装手册介绍了S3528系列以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3552F以太网交换机安装手册介绍了S3552F以太网交换机的安装过程交换机的启动软硬件维护与监控等内容Quidway S3500系列以太网交换机操作手册介绍了入门端口VLAN网络协议路由协议组播协议QoS/ACL安全STP集中管理可靠性系统管理自动侦测等模块的内容Quidway S3500系列以太网交换机命令手册包括入门端口VLAN网络协议路由协议组播协议QoS/ACL安全STP集中管理可靠性系统管理自动侦测等模块的命令解释本书简介Quidway S3500系列以太网交换机操作手册章节安排如下z入门主要描述访问以太网交换机的方式和步骤z端口主要介绍如何配置以太网端口和端口汇聚配置z VLAN主要介绍VLAN isolate-user-vlan GARP GVRP的相关配置z网络协议主要介绍网络协议配置过程包括IP地址配置ARP配置DHCP 配置访问管理配置及IP性能配置z路由协议主要介绍路由协议配置过程包括静态路由配置RIP配置OSPF 配置BGP配置和路由策略配置z组播协议主要介绍GMRP IGMP snooping IGMP PIM-DM PIM-SM的配置z QoS/ACL主要介绍QoS/ACL的相关配置z安全主要介绍以太网交换机安全相关配置包括802.1x AAA RADIUS配置z STP主要介绍以太网交换机上生成树协议的相关配置z集中管理主要介绍以太网交换机集中管理的相关配置包括堆叠配置和HGMP 配置z可靠性主要介绍VRRP配置z系统管理主要介绍以太网交换机的管理和维护的相关配置包括文件管理系统维护网络管理配置等z自动侦测主要介绍自动侦测原理及其应用的相关配置z附录缩略语表读者对象本书适合下列人员阅读z网络工程师z网络管理人员z具备网络基础知识的用户本书约定1. 通用格式约定格式意义宋体正文采用宋体表示黑体除一级标题采用宋体加粗以外其余各级标题均采用黑体楷体警告提示等内容一律用楷体并且在内容前后增加线条与正文隔离格式意义Terminal Display格式自定义的Terminal Display格式英文Courier New中文宋体文字大小8.5表示屏幕输出信息此外屏幕输出信息中夹杂的用户从终端输入的信息采用加粗字体表示2. 命令行格式约定格式意义粗体命令行关键字命令中保持不变必须照输的部分采用加粗字体表示斜体命令行参数命令中必须由实际值进行替代的部分采用斜体表示[ ] 表示用[ ]括起来的部分在命令配置时是可选的{ x | y | ... }表示从两个或多个选项中选取一个[ x | y | ... ]表示从两个或多个选项中选取一个或者不选{ x | y | ... } *表示从两个或多个选项中选取多个最少选取一个最多选取所有选项[ x | y | ... ] *表示从两个或多个选项中选取多个或者不选#由#号开始的行表示为注释行3. 键盘操作约定格式意义加尖括号的字符表示键名如<Enter><Tab><Backspace><a>等分别表示回车制表退格小写字母a<键1 + 键2> 表示在键盘上同时按下几个键如<Ctrl+Alt+A>表示同时按下Ctrl Alt A这三个键<键1键2> 表示先按第一键释放再按第二键如<Alt F>表示先按<Alt>键释放后再按<F>键4. 鼠标操作约定格式意义单击快速按下并释放鼠标的一个按钮双击连续两次快速按下并释放鼠标的一个按钮拖动按住鼠标的一个按钮不放移动鼠标5. 各类标志本书还采用各种醒目标志来表示在操作过程中应该特别注意的地方这些标志的意义如下小心注意警告危险提醒操作中应注意的事项说明提示窍门思考对操作内容的描述进行必要的补充和说明。
3500中文说明书
IP camera tester 网络视频监控测试仪使用手册（IPC1.03）⏹感谢您购买工程宝安防监控视频测试仪。
使用前请务必阅读使用说明书，并正确使用。
⏹为了能安全地使用本仪器，请您先仔细阅读使用说明书上的「安全注意事项」。
⏹说明书阅读后请妥善保管，以便随时查阅、参考。
⏹附有的保修凭证或机身的保修封贴，请勿损坏。
⏹使用中遇到问题，或仪器出现损坏时，请与公司技术部联系。
目录一、安全事项--------------------------------------------------------- 1二、IP网络视频监控测试仪简介 ------------------------------------------- 22.1 概述------------------------------------------------------- 22.2 产品特点---------------------------------------------------- 22.3 产品功能---------------------------------------------------- 42.4 产品配件--------------------------------------------------- 102.5 仪表各部位名称和功能： --------------------------------------- 11三、操作说明-------------------------------------------------------- 153.1 电池安装及充电说明------------------------------------------- 153.2 仪器连接--------------------------------------------------- 163.2.1 网络摄像机连接---------------------------------------- 163.2.2 模拟摄像机连接---------------------------------------- 173.3.3 SDI数字摄像机连接------------------------------------- 183.3 功能菜单操作------------------------------------------------ 193.3.1 视频监控--------------------------------------------- 213.3.1.1 云台控制器参数设置------------------------------ 223.3.1.2 色彩及存储设置--------------------------------- 243.3.1.3 视频图像放大----------------------------------- 253.3.1.4 拍照截图-------------------------------------- 263.3.1.5 录像功能-------------------------------------- 263.3.1.6 相片浏览-------------------------------------- 273.3.1.7 录像回放-------------------------------------- 283.3.1.8 视频信号测量*（*定制功能型号见附表）--------------- 293.3.2 图像发生器 TV OUT ------------------------------------ 313.3.3 ONVIF网络摄像机测试----------------------------------- 323.3.4 IP网络摄像机测试-------------------------------------- 393.3.5 SDI摄像机测试 *（*定制功能型号见附表）------------------- 423.3.6 IP地址扫描 ------------------------------------------ 433.3.7 PING连通性测试--------------------------------------- 443.3.8 网线测试器------------------------------------------- 453.3.9 寻线器*（*定制功能型号见附表） -------------------------- 453.3.10 端口闪烁-------------------------------------------- 473.3.11 串口工具-------------------------------------------- 483.3.12 激光功率计*（*定制功能型号见附表）---------------------- 493.3.13 可见红光源*（*定制功能型号见附表）---------------------- 503.3.14 高精度数字万用表*（*定制功能型号见附表）----------------- 523.3.15 视频播放器------------------------------------------ 593.3.16 音乐播放器------------------------------------------ 603.3.17 手电筒--------------------------------------------- 603.3.18 PoE/PSE电压测试功能--------------------------------- 613.3.19 TDR线缆故障测量*（*定制功能型号见附表）----------------- 613.3.20 计算器--------------------------------------------- 643.3.21 浏览器--------------------------------------------- 653.3.22 IPC viewer 移动客户端 ------------------------------ 663.3.23 DC12V电源输出--------------------------------------- 673.3.24 应用工具-------------------------------------------- 693.3.25 APPS工具夹----------------------------------------- 763.3.26 系统设置-------------------------------------------- 773.3.27 更新----------------------------------------------- 803.4 DC12V 1A供电输出-------------------------------------------- 803.5音频测试功能 ------------------------------------------------ 81四、技术参数-------------------------------------------------------- 824.1 技术参数总表------------------------------------------------ 824.2 万用表技术参数---------------------------------------------- 844.3 光功率计技术参数 -------------------------------------------- 864.4可见红光源技术参数-------------------------------------------- 87一、安全事项⏹使用本仪器时，请遵守当地的电气使用相关规则，避免于医院、加油站等不可使用电气的地方使用。
3500_53操作 手册
操作手册本特利内华达资产状态监测3500/53超速检测系统3500/53超速检测系统操作手册版权所有1997 本特利内华达保留所有权力本手册内容如有更改，恕不另行通知。
以下为通用电气公司在美国及其他国家的商标：Actionable Information, Actionable Information to the Right People at The Right Time, ADRE, Bently Nevada, CableLoc, Data Manager, Decision Support, DemoNet, Dynamic Data Manager, Dynamic Transmitor, Engineer Assist, FieldMonitor, FluidLoc, FlexiTIM, FlexiTAM, Helping you Protect and Manage All Your Machinery, HydroVU, Key Φ, Keyphasor, Machine Condition Manager 2000, MachineLibrary, MicroPROX, Move Data, Not People, Move Information, Not Data, Performance Manager, PROXPAC, Proximitor, REBAM, Seismoprobe, System 1, TDIXconnX, Tecknowledgy, TipLoc, TorXimitor, Transient Data Manager, Trendmaster, TrimLoc, VAM, Velomitor, Xlerometer联络信息当您无法与本特利内华达当地代表联系时，请通过下列途径：邮寄地址1631 Bently Parkway SouthMinden, Nevada USA 89423USA电话 1.775.782.36111.800.227.5514传真 1.775.215.2873因特网/bently补充信息注意注意：：本手册未包含运行与维护该产本手册未包含运行与维护该产品所必需的所有信息品所必需的所有信息品所必需的所有信息。
HP color LaserJet 3500 打印机 说明书
访问：/go/macosx，以了解 Macintosh OS X 支持信息和 HP 的驱动程序更 新预订服务。
访问：/go/mac-connect，以了解专门为 Macintosh 用户设计的产品。
hp 客户服务
电话技术支持
HP 在保修期内提供免费电话技术支持。当您打电话时，电话将转接到准备为您提供帮助的技 术支持小组。有关您所在国家/地区的电话号码，请参阅产品盒中附带的清单，或者访问 /support/callcenters。在致电 HP 之前，请准备好以下信息：产品名称和序 列号，购买日期和问题的说明。
PostScript® 是 Adobe Incorporated 的商标。
Systems
UNIX® 是 Open Group 的注册商标。
Windows®、 MS Windows® 和 Windows NT® 是 Microsoft Corp. 在 美 国 的 注 册 商 标。
Hewlett-Packard Development Company, L.P. 20555 S.H. 249 Houston, TX 77070
延长服务： 1-800-446-0522
ZHCN
iii
HP 工具箱
要检查打印机状态和设置并查看故障排除信息和联机文档，请使用 HP 工具箱。如果打印机是 直接连接至计算机，或者如果打印机是连接至网络的，则会看到 HP 工具箱。必须执行完全的 软件安装才能使用 HP 工具箱。请参阅使用 hp 工具箱。
打印机驱动程序：访问 。选择语言。单击 support & drivers 区，然后输 入 color laserjet 3500 或 color laserjet 3700 作为产品名称。驱动程序的网页可 能是英文网页，但是您可以下载多种语言的驱动程序。 软件实用程序、驱动程序和电子信息
Stomacher 3500系列产品说明书
This heavy duty range of machines is manufactured to industrial standards, and regularly used in applications for large volumefood microbiology, forensic residue analysis and testing for waterborne parasites.Among other large volume applications, the Stomacher ®technique has become the world standard for preparing samples for Trichinella in pork and waterborne parasites such as Giardia.Why the Stomacher ® 3500?400-3500ml volume samplesTrichinella testing Cryptosporidium andGiardia testing Bioburden testing of garments and dressings Forensic residue Analysis 3 year warranty and 10 year service supportThe Stomacher ®3500 Series is a versatile range of tools for large volume blending and extraction, where all the washing solution or solvent needs to be retained for analysis.Stomacher ® 3500 StandardStomacher ® 3500 Water BiowasherStomacher ® 3500 Thermo BioreactorThe Stomacher® 3500 is used wherelarge volume blending is required.The blending of powders with diluentsand the microbiological testing ofcomplete recipe dishes are twopopular applications.The Stomacher® 3500 Biowasher wasoriginally designed to process thelarge volume of filter fibres derivedfrom cartridge filters used in testingwater for parasites.The Stomacher® method forpreparing the samples is referencedthroughout the world for thistechnique.The Stomacher® 3500 BioreactorThermo is used in the pork industry toprepare samples for the detection ofTrichinella.The machine has a heater elementinside the door and the samples ofpork meat are digested inside thebag with enzyme and HCI acid.The resultant slurry is sieved andexamined under microscopy for thepresence of the Trichinella parasite.Choose between the BA6042standard 3500 Bag (65 microns) orfor more resilient applications use theBA6042/HD Heavy Duty bag whichhas a greater thickness of 80 microns.Stomacher®3500Seward UKEurope, Middle East, Indian Subcontinent, Africa, Asia, Pacific, ROW+44 (0)1903 524600**************.uk Seward (USA)North America, South America+1 631 337 1808******************Seward is a wholly owned subsidiaryof FermionX Ltd.。
Eurotherm 3500系列高级过程控制器用户指南说明书
The latest range of advanced process controllers from Eurotherm provide precision control of temperature and a host of other process variables together with an abundance of advanced options making it the most adaptable product in its class.The emphasis is on flexibility yet the 3500 controllers still maintain ease of use. A simple ‘Quick Start’ process is used to configure all the basic functions essential to controlling your process. This includes input sensor type, measurement range, control options and alarms making ‘Out the Box’operation truly achievable. More advanced features are configured using a PC based graphical configuration tool enabling users to pick function blocks from a library then connect them together using soft wiring.The large 5-digit display provides a clear and unambiguous indication of the process value. A four-line message centre provides custom or standard views of important information to the user while vertical and horizontal bargraphs provide at a glance visual indication of the process. OEM Security enables a user to protect their intellectual property by preventing unauthorised cloning of the configuration.Dual loopTwo independent PID loops make the 3500 ideal for interactive processes such as those found in carburising furnaces, environmental chambers and autoclaves. The loops may also be ‘soft’ wired together in creative ways to create cascade, ratio or other intelligent control strategies.Control Optimise Simplify • 2 PID loops•50 Programs•Precision PV input•Carbon potential•Maths/logic/timers•Custom user interface•Recipes•Digital communications–Modbus RTU Master and– Slave– Ethernet Modbus TCP– Profibus DP network– DeviceNet® network•OEM Security•Multi-language support (English, French, German, Spanish and Italian)3500 SeriesDual Loop Controller/ProgrammerImprove process efficiency, product quality and minimise wasteSetpoint programmerHeat treatment and other processes often requirethe ability to change setpoints with time. The dualloop 3500 has two programmers which can beconfigured as synchronised or independentprograms. 50 programs with up to two channelscan be stored with a total of 500 segments.Input/output flexibilityA range of plug-in I/O modules caters forindividual application requirements minimisingstock and spares holding. A total of sixteenmodule types, including relay, logic, triac andanalogue, are available to fit into either three slotson 3508 or six slots on 3504.2| 3500 Series Data SheetCarbon potentialThe 3500 calculates carbon potential from measuring both the oxygen concentration and temperature of a furnace using a zirconia probe. This enables a dual loop 3500 to be used to control both carbon potential and temperature in an atmosphere controlled furnace.Customised solutionsThe 3500 is more than just a process controller. It also provides a selection of application blocks including maths, logic and timing functions offering the ability to develop custom solutions and create cost effective machine controllers. The custom User Page feature allows an operator to view current information in a style most suitable to the process and terminology of the industry.CommunicationsThe 3500 is designed to integrate seamlessly withprogrammable logic controllers and other supervisory systems.A wide range of serial communication options are catered for including EIA232 and EIA485 using the Modbus RTU protocol along with Profibus DP and DeviceNet. Ethernet connectivity is achieved using the Modbus TCP protocol.RecipesUsing a PC tool recipes can be created that can be used to change the operating parameters of the 3500 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.Infrared configuration adaptorCommunications to the 3500 can be achieved by using an infrared adaptor.Clipping onto the front fascia it provides Eurotherm iToolscommunications allowing configuration and commissioning to be performed without the need to access the rear terminals of the controller.Eurotherm iTools Graphical Wiring EditorThe GWE is anextremely easy way to create applications. It allows users to select the function blocks they wish to use in theirapplication then connect them together using ‘Soft Wiring’. The GWE gives the user a pictorial view of exactly what hehas configured and can also be used to monitor runtime conditions.IO ExpanderExtra IO can be provided by the IO Expander. Options are available for 10in 10out and 20in 20out.SpecificationEnvironmental performanceTemperature limits: Operation:0 to 50°C Storage:–10 to 70°CHumidity limits: Operation:5 to 95% RH non condensing Storage:5 to 95% RH non condensing Panel sealing: IP65, NEMA12Vibration: 2g peak, 10 to 150Hz Altitude:<2000 metresAtmospheres:Not suitable for use in explosive or corrosive atmosphere*Electromagnetic compatibility (EMC)Emissions and immunity:BS EN61326Suitable for domestic, commercial and light industrial as well as heavy industrial.(Domestic/light (Class B) emissions. Industrial (Class A) environmental immunity emissions.With Ethernet module fitted product only suitable for Class A emissionsElectrical safetyBS EN61010:Installation cat. II; Pollution degree 2INSTALLATION CATEGORY IIThe rated impulse voltage for equipment on nominal 230V mains is 2500V .POLLUTION DEGREE 2Normally, only non-conductive pollution occurs. Occasionally, however, a temporary conductivity caused by condensation shall be expected.PhysicalDimensions:3508: 48W x 96H x 159Dmm 3504: 96W x 96H x 159Dmm Weight: 3508: 400g 3504: 600gPanel:3508: 1/8 DIN mounting 45W x 92Hmm cut-out 3504: 1/4 DIN mounting 92W x 92Hmm cut-out Panel depth:Both: 148mmOperator interfaceType:STN LCD with backlight Main PV display:3508: 4 1/2 digits. green 3504: 5 digits, greenMessage display: 3508: 8 character header and 3 lines of 10 characters 3504:16 character header and 3 lines of 20 characters Status beacons: Units, outputs, alarms, program status, program events, active setpoint, manual, remote SP Access levels:3 operator plus config. Password protectedPower requirementsSupply voltage:100 to 230V ac, ±15%,48 to 62Hz, max 20W (3508 15W)24V ac, –15%, +10%.24V dc, –15% +20% ±5% ripple voltage max 20W (3508 15W)Interrupt protection: Standard: Holdup >10ms at 85V RMS supply voltageLow voltage: Holdup >10ms at 20.4V RMS supply voltageInrush current:High Voltage (VH): 30A duration <100μS Low Voltage (VL): 15A duration <100μSUser pageNumber: 8Parameters: 64 totalFunctions: Text, conditional text, values, bargraph Access level:User selectable (level 1, 2 or 3)Back up BatteryThis instrument is fitted with a back up battery which should be changed between 6 and 10 years of use.A record of instrument configurations or, preferably, a clone file should be maintained. This can be re-loaded following a battery change or other maintenance.The battery is not serviceable: contact your local service centre to make suitable arrangements. For further information see User Manual HA027988 at ApprovalsCE, cUL listed (file E57766), Gost. Suitable for use in Nadcap and AMS2750Eapplications under System Accuracy Test calibration conditionsInfrared clipconnected to the 3504No of ports: 2 modules can be fittedSlot allocation: Modbus RTU or I/O expander only in J commsportSerial communications optionProtocols: Modbus RTU SlaveProfibus DPDeviceNetEI-Bisync (818 style mnemonics)Modbus RTU master broadcast (1 parameter)I/O ExpanderIsolation: 264V ac, double insulated Transmission standard: EIA232, EIA485, CAN (DeviceNet), Profibus Ethernet communications optionProtocol: Modbus TCP, 10baseTIsolation: 264V ac, double insulated Transmission standard: 802.3Features: DHCP client, 4 simultaneous mastersCalibration accuracy: <±0.1% of reading ±1LSD (Note 1) Sample rate: 9Hz (110ms)Isolation: 264V ac double insulation from the PSU andcommunicationInput filter: Off to 59.9s. Default 1.6sZero offset: User adjustable over full rangeUser calibration: 2-point gain & offset ThermocoupleRange: Uses 40mV and 80mV ranges dependent ontypeTypes: K, J, N, R, S, B, L, T, C, PL2, customdownload x 2Resolution: 16 bitsLinearisation accuracy: <0.2% of readingCold junction compensation: >40:1 rejection of ambient changeExternal reference of 0°C, 45°C and 50°C Cold junction accuracy: <±1°C at 25°C ambientResistance thermometerRange: 0-400Ω (–200°C to +850°C) Resistance thermometer types: 3-wire Pt100 DIN 43760Resolution (°C): <0.050°C with 1.6sec filter Resolution: 16 bitsLinearity error: <±0.03% (best fit straight line) Calibration error: <±0.310°C/°C, ±0.023% of measurementat 25°CDrift with temperature: <±0.010°C/°C, ±25ppm/C of measurementfrom 25°CCommon mode rejection: <0.000085°C/V (maximum of 264V rms) Series mode rejection: <0.240°C/V (maximum of 280mV pk-pk) Lead resistance: 0Ω to 22Ω, matched lead resistanceInput impedance: 100MΩBulb current: 200μA40mV RangeRange: –40mV to +40mVResolution (μV): <1.0μV with 1.6sec filterResolution: 16 bitsLinearity error: <0.003% (best fit straight line) Calibration error: <±4.6μV, ±0.053% of measurement at 25°C Drift with temperature: <±0.2μV/C, ±28ppm/C of measurementfrom 25°CCommon mode rejection: >175dB (maximum of 264V rms)Series mode rejection: >101dB (maximum of 280mV pk-pk)Input leakage current: ±14nAInput impedance: 100MΩ80mV RangeRange: –80mV to +80mVResolution (μV): <3.3μV with 1.6sec filterResolution: 16 bitsLinearity error: <0.003% (best fit straight line) Calibration error: <±7.5μV, ±0.052% of measurement at 25°C Drift with temperature: <±0.2μV/°C, ±28ppm/C of measurementfrom 25°CCommon mode rejection: >175dB (maximum of 264V rms)Series mode rejection: >101dB (maximum of 280mV pk-pk)Input leakage current: ±14nAInput impedance: 100MΩ2V RangeRange: –1.4V to +2.0VResolution (mV): <90μV with 1.6sec filterResolution: 16 bitsLinearity error: <0.015% (best fit straight line)Calibration error: <±420μV, ±0.044% of measurement at 25°C Drift with temperature: <±125μV/C, ±28ppm/C of measurementfrom 25°CCommon mode rejection: >155dB (maximum of 264Vrms)Series mode rejection: >101dB (maximum of 4.5V pk-pk)Input leakage current: ±14nAInput impedance: 100MΩ10V RangeRange: –3.0V to +10.0VResolution (mV): <550μV with 1.6sec filterResolution: 16 bitsLinearity error: <0.007% of reading for zero source resistance.Add 0.003% for each 10Ω of source plus leadresistanceCalibration error: <±1.5mV, ±0.063% of measurement at 25°C Drift with temperature: <±66μV/C, ±60ppm/C of measurementfrom 25°CCommon mode rejection: >145dB (maximum of 264V rms allowed) Series mode rejection: >92dB (maximum of 5V pk-pk allowed)Input impedance: 62.5kΩ to 667kΩ depending on input voltageNotes1.Calibration accuracy quoted over full ambient operating range and for all input linearisation types2. Contact EurothermIsolation: Not isolated from each other. 264V ac doubleinsulation from the PSU and communication InputRating: Voltage level: Closed 0 to 7.3V dcOpen 10.8 to 24V dcContact closure: Open >1200ΩClosed <480ΩFunctions: Includes program control, alarm acknowledge,SP2 select, manual, keylock, RSP select,standbyOutputRating: 18V dc >9mA <15mAFunctions: Includes control outputs, alarms, events, statusRating: Min 1mA @ 1V dc, Max 2A @ 264V ac resistive1,000,000 operations with external snubber Isolation: 264Vac double insulationFunctions: Includes control outputs, alarms, events, statusIO Modules 3508: 3 modules can be fitted3504: 6 modules can be fittedIO Expander: 20 Digital inputs, 20 relay outputsCalibration accuracy: ±0.2% of reading ±1LSDSample rate: 9Hz (110ms)Isolation: 264V ac double insulationInput filter: Off to 59.9s. Default 1.6sZero offset: User adjustable over full rangeUser calibration: 2-point gain & offsetFunctions: Includes process input, remote setpoint,power limitThermocoupleRange: –100mV to +100mVTypes: K, J, N, R, S, B, L, T, C, PL2, custom Resolution (μV): <3.3μ****************Effective resolution: 15.9 bitsLinearisation accuracy: <0.2% of readingCold junction compensation: >25:1 rejection of ambient changeExternal reference of 0°C, 45°C and 50°C Cold junction accuracy: <±1°C at 25°C ambient3500 Series Data Sheet | 3Resistance thermometerRange: 0-400Ω (–200°C to +850°C) Resistance thermometer types:3-wire Pt100 DIN 43760Resolution (°C): <±0.08°C with 1.6sec filterEffective resolution: 13.7 bitsLinearity error: <0.033% (best fit straight line) Calibration error: <±(0.4°C +0.15% of reading in °C)Drift with temperature: <±(0.015°C +0.005% of reading in °C) per °C Common mode rejection: <0.000085°C/V (maximum of 264V rms) Series mode rejection: <0.240°C/V (maximum of 280mV pk-pk) Lead resistance: 0Ω to 22Ω, matched lead resistanceBulb current: 300μA100mV RangeRange: –100mV to +100mVResolution (μV): <3.3μV with 1.6s filter timeEffective resolution: 15.9 bitsLinearity error: <0.033% (best fit straight line) Calibration error: <±10μV, ± 0.2% of measurement at 25°C Drift with temperature: <±0.2μV + 0.004% of reading per °C Common mode rejection: >146dB (maximum of 264V rms)Series mode rejection: >90dB (maximum of 280mV pk-pk)Input leakage current: <1nAInput impedance: >100M2V RangeRange:–0.2V to +2.0VResolution (μV): 30uV with 1.6s filter timeEffective resolution: 16.2 bitsLinearity error: <0.033% (best fit straight line) Calibration error: <±2mV + 0.2% of readingDrift with temperature: <±0.1mV + 0.004% of reading per °C Common mode rejection: >155dB (maximum of 264Vrms)Series mode rejection: >101dB (maximum of 4.5V pk-pk)Input leakage current: <10nAInput impedance: >100M10V RangeRange: –3.0V to +10.0VResolution (μV): <200μV with 1.6sec filterEffective resolution: 15.4 bitsLinearity error: <0.033% (best fit straight line) Calibration error: <±0.1mV + 0.02% of reading per °CDrift with temperature: <± 0.1mV + 0.02% of reading per °C Common mode rejection: >145dB (maximum of 264V rms)Series mode rejection: >92dB (maximum of 5V pk-pk)Input impedance: >69kΩType: Single channelResistance: 100Ω to 15kΩExcitation: 0.5V dc supplied by moduleIsolation: 264V ac double insulationFunctions:Includes valve position and remote setpointType: Single channelRating: 0-20mA <600Ω0-10V dc >500ΩAccuracy: <±2.5%Resolution: 10 bitsIsolation: 264V ac double insulationType: Single channelRating: 0-20mA <600Ω0-10V dc >500ΩAccuracy: <±0.5%Resolution: 11 bitsIsolation: 264V ac double insulationType: Dual channelRating Output: 4-20mA dc, <1KΩTxPSU: 24V dc, 22mAIsolation: 264V ac double insulation between channels Functions: Either channel can be control output or TxPSU Accuracy: <±1%Resolution: 11 bits Module types: Triple contact closure, triple logic level Isolation: No channel isolation. 264V ac double insulationfrom other modules and systemRating;Voltage level: Open –3 to 5V dc @ <-0.4mA***********************Contact closure: Open >28kΩClosed <100ΩFunctions: Includes program control, alarm acknowledge,SP2 select, manual, keylock, RSP select,standbyModule types: Single channel, triple channelIsolation: No channel isolation.264V ac double insulation from other modulesand systemRating Single: 12V dc >20mA <29mATriple: 12V dc >9mA <12mAFunctions: Includes control outputs, alarms, events, statusModule types: Single channel Form A, Single channelForm C, dual channel Form AIsolation: 264V ac double insulationRating: Min 100mA @ 12V dc, Max 2A @264V ac resistiveMin 400,000 (max load) operations withexternal snubberFunctions: Includes control outputs, alarms, events, statusModule types: Single channel, dual channelIsolation: 264V ac double insulationRating: <0.75A @ 264V ac resistiveFunctions: Includes control outputs, alarms, events, statusType: Single channelIsolation: 264V ac double insulationRating: 24V dc @ 20mAType: Single channelIsolation: 264V ac double insulationBridge voltage: Software selectable 5V dc or 10V dc Bridge resistance: 300Ω to 15kΩInternal shunt resistor: 30.1Ω @0.25%, used for calibration of 350Ωbridge at 80%Type:20 I/O: 4 Form C relays, 6 Form A relays,10 logic inputs40 I/O: 4 Form C relays, 16 Form A relays,20 logic inputsIsolation: 264V ac double insulation between channels Ratings: Relay: Min 100mA @ 12V dc,Max 2A @ 264V ac resistiveLogic Input: Open -3 to 5V dc @ <–0.4mA*********************** Communications: Using EX comms module in comms slot JControlNumber of loops: 2Loop update: 110msControl types: PID, OnOff, VP, Dual VPCooling types: Linear, fan, oil, waterModes: Auto, manual, forced manual, control inhibit Overshoot inhibition: High and low cutbacksNumber of PID sets: 3, selectable on PV, SP, OP, On Demand,program segment and remote input Control options: Supply voltage compensation, feedforward,output tracking, OP power limiting, SBR safeoutputSetpoint options: Remote SP with trim, SP rate limit, 2ndSetpoint, tracking modes4| 3500 Series Data SheetSetpoint programmerProgram function: 50 programs, max 500 segments Program names: User defined up to 16 charactersNo of profile channels: 2 (1 if single loop)Operation:Full or partially synchronisedEvents: 8 per channel (8 when fully synchronised)1 timed event, 1 PV eventSegment types: Rate, dwell, time, call, goback and wait Digital inputs: Run, Hold, Reset, RunHold,RunReset, Adv Seg,Skip SegServo action: Process value, setpointPower failure modes: Continue, ramp, resetOther functions: Guaranteed soak, holdback, segmentuser values, wait inputs, PV hot start Process alarmsNumber: 8Type: High, low, devhi, devlo, devband Latching: None, auto, manual, eventOther features: Delay, inhibit, blocking, display message,3 priority levelsDigital alarmsNumber: 8Type: PosEdge, negEdge, edge, high, low Latching: None, auto, manual, eventOther features: Delay, blocking, inhibit, display message,3 priority levelsZirconiaNumber: 1Functions: Carbon potential, dewpoint, %O2 LogO2,probe mVSupported probes: Barber Colman, Drayton, MMICarbon, AACC,Accucarb, SSI, MacDhui, BoschO2,BoschCarbonGas reference: Internal or remote analogue inputProbe diagnostics: Clean recovery time, impedance measurement Probe burn-off: Automatic or manualOther features: Sooting alarm with tolerance setting, PV HumidityNumber: 1Functions: Relative humidity, dewpoint Measurement: Psychrometric (wet & dry) inputs Atmosphere compensation: Internal or remote analogue inputOther features: Psychrometric constant adjust RecipesNumber:8Parameters: 24 per recipeLength of name: 8 CharactersSelection: HMI, comms, strategy Transducer calibrationNumber: 2Type: Shunt, load cell, comparisionOther features: AutotareCommunication tablesNumber: 250Function: Modbus remapping (indirection)Data formats:Integer, IEEE (full resolution) Application blocksSoft wiring: Orderable options of 30, 60 120 or 250 User values: 16 real numbers with decimal point2 IP maths: 24 blocks, add, subtract, multiply, divide,absolute difference, max, min, hot swap,sample and hold, power, square root,Log, Ln, exponential, switch2 IP logic: 24 blocks, AND, OR, XOR, latch, equal,not equal, greater than, less than, greaterthan or equal to, less8 IP logic: 2 blocks. AND, OR, XOR8 IP multiplexor: 4 blocks. 8 sets of 8 values selected byinput parameter8 IP multiple IP: 3 blocks, average, min, max sumBCD Input: 2 blocks, 2 DecadesInput monitor: 2 blocks, max, min, time above threshold 16 Pt linearisation: 2 blocks, I6-point linearisation fit Polynomial fit: 2 blocks, characterisation by Poly Fit table Switchover: 1 block, smooth transition between 2 values Timer blocks: 4 blocks, OnPulse, OnDelay, OneShot,MinOn TimeCounter blocks: 2 blocks, Up or down, directional flag Totaliser blocks: 2 blocks, alarm at threshold valueReal time clock: 1 block, day & time, 2 time based alarms3500 Series Data Sheet | 56| 3500 Series Data SheetOrder Code Hardware/options codingBasic ProductNotes1. Only available with the Profibus Controller2. I/O slots 4, 5 and 6 are only available on the 35043. Provides Valve Position option in Heat/Cool applications. Single channel VP included as standard4. If standard config is selected an instrument without configuration will be supplied.5. If C or F units are selected they must be the same for both loops. If C or F are not selected for Loop 1they cannot be selected for Loop 2.6. CH1 = Heat, CH2 = Cool.3500 AccessoriesTable 1Configuration coding3500 Series Data Sheet | 7Document Number HA029045 Issue 8March 2016 Scan for localcontactsEurotherm by Schneider Electric, the Eurotherm logo, Chessell, EurothermSuite,M ini8, Eycon, Eyris, EPower, EPack, nanodac, piccolo, versadac, optivis, Foxboroand Wonderware are trademarks of Schneider Electric, its subsidiaries and affiliates.All other brands may be trademarks of their respective owners.All rights are strictly reserved. No part of this document may be reproduced, modified,or transmitted in any form by any means, nor may it be stored in a retrieval systemother than for the purpose to act as an aid in operating the equipment to which thedocument relates, without the prior written permission of Eurotherm Limited.Eurotherm Limited pursues a policy of continuous development and productimprovement. The specifications in this document may therefore be changed withoutnotice. The information in this document is given in good faith, but is intended forguidance only.Eurotherm Limited will accept no responsibility for any losses arising from errors inthis document.©CopyrightEurothermLimited216Eurotherm LimitedFaraday Close, Durrington,Worthing, West Sussex, BN13 3PLPhone: +44 (01903) 268500Fax: +44 (01903) 265982/worldwide。
GEM Premier 3500操作维护规程
GEM Premier 3500操作维护规程1 目的为GEM Premier 3500仪器使用提供指导，包括以下内容：分析包插入，样本采集，质量控制，校准确认品取样(用于智能化质量管理分析包) ，校准，分析包更换，仪器清洗和维护。
2 范围适用于生化室经授权的检验技术人员，维修保养人员和外来的参观学习人员。
3 样品类型，采集和处理标准3.1患者状态3.1.1采集血样之前，确保病人呼吸平稳。
动脉穿刺引起的焦虑可以导致通气过度，通气过度会显著改变血气检测值。
使病人放心并和病人建立良好的关系可以帮助病人放松。
局部麻醉也可以用于减轻动脉穿刺带来的疼痛和焦虑。
3.1.2使用呼吸机或者接受辅助供氧的病人，至少应在呼吸机参数或吸氧浓度百分数改变20分钟之后再采集血样。
3.2采样部位选择适当的动脉血标本采样部位应包括以下标准：3.2.1存在侧支血流3.2.2血管易于触到3.2.3动脉周围组织不敏感3.2.4腕关节处的桡动脉完全符合上述标准，经常用来采集动脉血。
其他临床上用于采集动脉血的还有肘部的肱动脉以及股动脉。
3.2.5虽然通常血气分析都推荐用动脉血，但是如果采集得当，毛细血管血也可以用，毛细血管血的采集部位最常用的是足跟，手指和耳垂。
注意：组织液可能影响红细胞压积和电解质结果。
3.2.6静脉血标本，通常采集自肘窝静脉，可以提供有关pH 值，二氧化碳分压，电解质和红细胞压积的可靠信息，但是并不能用来进行氧气分析。
3.2.7混合静脉血标本可以通过肺动脉导管采集。
采样前，导管死腔容积应该注入液体清洗。
动脉采样时，血必须非常缓慢的由导管抽出，防止含氧充足的肺毛细血管血与混合静脉血回流混合。
3.2.8全血标本最常采集桡动脉或肱动脉血，操作根据动脉穿刺操作指导。
采集动脉化毛细血管床的毛细血管血可以用，但是必须提请注意。
过多的组织液会严重影响电解质水平。
来自肺部的混合静脉血也可联合血氧饱和度测定仪用来测定耗氧量。
3.2.9当样本进入之后，仪器的输出指示带会详细说明标本类型。
Philips HDR3500 录音机用户手册说明书
Quick Start GuideConnect Set up Enjoy1231Connect2Set upBasic ConnectionBefore ConnectingSelect one of the following basic connections ( A or B ) according to the type of connecting devices you have.DIGITAL OUT SCART INCOAXIAL CVBS OUT S-VIDEO OUTVIDEO OUT AUDIO OUTAUDIOANTENNA-INTV-OUTTO TVEXT 1TO VCR/SAT EXT 2COMPONENT VIDEO OUTP BP RYRCVBS OUTS-VIDEO OUTVIDEO OUT AUDIATO TVEXT 1RLAntenna or cable TV signalTelevision (rear)Note See the accompanying user manual for other possible connections (e.g. Composite Video, Component Video, S-VIDEO).Recorder(rear)COAXIAL DIGITAL OUT CVBS OUTS-VIDEO OUTVIDEO OUT AUDIO OUTAUDIOANTENNA-INTV-OUTTO TVEXT 1TO VCR/SAT EXT 2COMPONENT VIDEO OUTBSCART INTENNA-INEXTTO VCR/SAT EXT 2Satellite dish/Cable TV walloutletTelevision (rear)Recorder (rear)Cable box (rear)C Select the country of your area for auto channeltuning and press OK . The auto scan menu appears and the automatic TV channel search starts.D Once complete, the programme list menuappears.Manage PresetsOK BACKNext PagePrev Page1 C2 On P012 C3 On P023C4OnP03Sort and rename the programs.PRCH NICAM StationMove Up Move DownNICAM RenameNote In this menu, you can change the TV channels sequence, rename it or set NICAM mode. For detailed descriptions, refer to the accompanying User Manual.E Press OK on the remote control to continue.The clock setting menu appears.Set the system time.Clock SettingOK BACK Next Page Prev PageDate:Time:31012007000000:://F Use ST keys to set the current date and time,use W X keys to select different entry fields. Press OK to confirmNote You may using the numeric keypad 0-9 on the remote control to enter the date and time.G Once complete, press OK to confirm and exitthe menu.The DVD recorder is now ready for use.AFinding the viewing channel A Press 2 on the recorder.B Switch on the TV and other connected devices (e.g. Cable Box, Satellite Receiver). The installation menu is displayed.WelcomeOK Next PageBefore using the recorder, please complete the installation.C In case you don’t see the recorder’s setting menu,press the Channel Down button on the TV’s remote control repeatedly (or AV, SELECT, ° button) until you see the menu. This is the correct viewing channel for the recorder.BStart basic setup Use the recorder’s remote control and follow the on-screen instructions to complete the installation.Note Use up S and down T keys to toggle through the options. To confi rm a setting, press OK .A Press OK on the remote control.The language setting menu appears.Menu LanguageSelect a menu language.English Français Deutsch EspañolOKBACK Next Page Prev PageNote The language options are different depending on your country or region.B Select the language for this recorder’s on-screendisplay and press OK .The country setting menu appears.Country SettingOKBACK Next Page Prev PageSelect your current country.UK Germany France SpainOption AUse this connection if you are connecting theantenna cable directly from the antenna wall socket or from a cable TV socket.A Unplug the antenna cable that is currentlyconnected to your TV and plug in the antenna cable to the ANTENNA-IN socket on this recorder.B Connect an RF antenna cable from the TV-OUT socket on this recorder to the Antenna In socket on the TV.C Connect a scart cable (not supplied) from theEXT1 TO TV socket on this recorder to the Scart input socket on your TV.D Plug in the power cable from the recorder to anAC power outlet.Option BUse this connection if your current antenna cable is connected to a cable box with a Scart output socket.A Keep the existing antenna connection from theCable box to your TV.B Connect a scart cable (not supplied) from theEXT1 TO TV socket on this recorder to the Scart input socket on your TV.C Connect another scart cable (not supplied) fromthe EXT2 TO VCR/SAT socket on this recorder to the Scart output socket on the Cable Box.D Plug in the power cable from the recorder to anAC power outlet.HDR3500_QSG_eng.indd 22008-02-22 2:03:36 PM。