BP65R1045S112中文资料

合集下载

继电器规格书 - RJ-SS-112DM1-S - WRG-Wangrong说明书

PS-002-004012016-7-28客户名/CustomerRELAY SPECIFICATION零件编号/Part Number品名/Product Description RJ-SS-112DM1-SDate Version PS No.继电器规格书冯旭强余明亮王凤客户批准/Customer Approval 盖章处/STAMPING AREAR&DSM PD发行批准 / Issued by序号担当00凌剑冰01凌剑冰2016-7-28增加黄山工厂描述变更履历/HISTORY日期变更项目2015-4-13初版1零件清单/PARTS LIST123 4 5 6 7 8 9 10 11 12 13 14 15 16Ver01RG3015010GN6-30 M8XRG301RG301FLAME CLASSUL FILE No.E171666E53664E171666E171666TYPE/TREATMENT型号/处理方式镀镍Vicryst R850Part零件名No.材质MATERIAL镀镍Nickel Plated镀镍Nickel PlatedNickel Plated3UEW 155(F Class)镀锡Base基座骨架Bobbin外壳Case推片CardSolder Coated挂钩Hinge可动弹片C Terminal轭铁Yoke衔铁Armature线材Wire可动接点C ContactM接点M ContactE171666线圈端子Coil Terminal铁芯CoreM端子M TerminalE234867PS-002-004E164502Epoxy胶水UV GlueSealing ResinAg Alloy铜包钢Cu coverd Steel聚氨脂漆包圆铜线Cu Alloy铜合金Polyurethane copper wire环氧树脂Steel铜合金Cu Alloy银合金Ag Alloy银合金Cu Alloy铁LCP铁Steel铁Steel铜合金PBTUV胶PBTPBT2.性能/SPECIFICATIONS2.1驱动部分/COIL SPECIFICATIONS2.1.1额定电压12VDC（在20℃时）Rated Coil Voltage12VDC at 20℃2.1.2额定功率0.45W（在20℃时）Nominal Power0.45W at 20℃2.1.3线圈电阻320Ω±10％（在20℃时）Coil Resistance320Ω±10％（at 20℃）2.1.4额定电流37.5mA±10％（在20℃时）Nominal Current37.5mA±10％（at 20℃）2.1.5吸合电压9VDC以下（在20℃时）Operate Voltage9VDC Max. at 20℃2.1.6释放电压0.6VDC以上（在20℃时）Release Voltage0.6VDC Min. at 20℃2.1.7最大连续施加电压18.6VDC Max. 155％额定电压Max Power18.6VDC Max. 155％of Nominal2.2开关部/CONTACT SPECIFICATION2.2.1开关类型单刀常开型Contact Configuration 1 Form A2.2.2接点规格10 A 250VAC（阻性负载）Contact Rating10 A @250VAC (Resistive)2.2.3接触电阻100mΩ以下， (初期值，DC 24V/1A条件下)Contact Resistance100mΩ Max. @ Initiate, DC 24V/1A500mΩ以下， (寿命试验后，DC 24V/1A条件下)500mΩ Max. @ After Life, DC 24V/1A2.2.4吸合时间20ms 以下（额定电压下）Operate Time20ms Max. @ Rated Voltage2.2.5释放时间10ms 以下（施加额定电压后断开时）Release Time10ms Max. @ Rated Voltage2.2.6最大动作频率300次/分（无负载）Max. Switching Rate300ops./min. (no load).6次/分（额定负载）6ops./min. (Rated load)Ver 01 PS-002-0042.3特性/GENERAL SPECIFICATION2.3.1绝缘电阻1000MΩ以上（500VDC）Insulation Resistance1000MΩ Min@500VDC2.3.2介质耐压1000VAC/分钟(接点间)Dielectric Strength4000VAC/分钟(线圈/接点间)1000VAC@50/60Hz 1 min.(Between Open Contacts)4000VAC@50/60Hz 1 min.(Between Coil and Contacts)2.3.3电气寿命1×105次以上（额定负载,气孔打开）Electrical Life1×105*******************************.2.3.4机械寿命1×106次以上（无负载）Mechanical Life1×106Cycle Min. @no load2.3.5使用环境温度－40～105℃（无凝结时）Temperature－40～105℃ @no condensation2.3.6使用环境湿度20～85%RH（无凝结时）Humidity20～85%RH @no condensation2.3.7抗振动耐久10～55Hz，双振幅 1.5mmVibration Mechanical10 to 55Hz, 1.5mm double amplitude误动作10～55Hz，双振幅2.5mmOperational10 to 55Hz, 2.5mm double amplitude2.3.8抗冲击耐久980m/s2 Min（约100G）Shock Mechanical980m/s2 Min（100G approximately)误动作98m/s2 Min（约10G）Operational98m/s2 Min（10G approximately)2.3.9重量 5.7克Weight 5.7g2.3.10焊锡条件5s@ 260°C (波峰焊)Solder ability5s@ 260°C (wave soldering)2.4端子性能/TERMINAL CHARACTERSITICS2.4.1端子强度5牛/10秒，任意方向静态压力，无异常，但端子弯曲可以Terminals strength5N 10s,Thereshall be no abnormalities.(The curving of the terminal shall be acceptable)2.4.2可焊性260±5℃ 3s，端子头部3mm部分90%以上的面积有锡覆盖Terminal solderbility（无铅焊锡）260±5℃ 3s，In Case of lead lead free solder,90% of the dipped portion shall be solderd.2.4.3耐热性5s @ 260°C,端子头部3mm浸入锡中，无异常发生Soldring Heat Resistance5s @ 260°C,There shall be no abnormalities. (wave soldering)01 Ver PS-002-0042.5安全规格/SAFETY REQUIREMENTS2.5.1UL规格认定（UL & C-UL）档案号：UL（UL & C-UL）File No.:2.5.2CQC标志认证证书编号：CQC Certificate No.:2.5.3TUV规格认定证书号TUV Certificate No.2.5.4产品符合ROHS和REACH要求。

农药助剂分类

序号成分类型商品名主要应用农药剂型1NSAE-双异丙基阴AEROSOL OSˊ2ASS-双辛基阴AEROSOL OT-A或AEROSOL OT-BEC、SC、SE、WP、WG3专利复配物阴/阴AGRILAN F460SC 4EO-PO共聚物复配物非AGRILAN F502SC 5RPEPO4阴AGRILAN F513SC 6复合磺酸盐阴/阴AGRILAN F524SC 7磷酸酯复合物阴AGRILAN F535SC8芳香族磺酸盐阴AGRILAN WP134或AGRILAN WP145或AGRILAN WP156WG9多芳烃磺酸盐阴AGRILAN WP178WP、SC10SNMT阴ARKOPON G RAN-ULARNOP或ARKOPON G RAN-ULAR IDCWG11SNMT-油酰阴ARKOPON G RAN-ULART PASTE或ARKOPON GRAN-ULAR T PLVHCWG12SNS阴BEVALOID 35或BEVALOID 36WP、WG13十三醇聚氧乙烯醚（2）磷酸酯17、18、19 EO n为2阴CRODAFOS T 214十三醇聚氧乙烯醚（5）磷酸酯 EOn＝5阴CRODAFOS T 515十三醇聚氧乙烯醚（10）磷酸酯 EOn＝10阴CRODAFOS T 1016有机磷酸酯阴DEHSCOFIX 904WP、SC17SNS阴DEHSCOFIX 915或DEHSCOFIX 917或Dispersing Agent A或Darvan 1或Darvan 2或Darvan 6或Darvan No1或Demol N或Demol NL或Demol NS或DemolSNB/Demol T或DYAPOLPWB-LSWP、SC、硫磺SC18丙烯酸-丙烯酸酯共聚物阴DISPERSANT DA SC19羧酸水溶液钾盐阴DISPERSANT DG分散性微粒剂分散剂20酚-磺酸钠盐阴DISPERSANT GN SC等21聚丙烯酸钠阴DISPERSANT HB22甲酚-甲醛缩合物磺酸盐阴Dispersing Agent 1494或Dispersing Agent 1494LIQ或Dispersing Agent 1728或Dispersing Agent S1WP等23甲酚-苯磺酸-甲醛缩合物阴Dispersing Agent SS DRY或Dispersing Agent SSWETWP24聚合的取代芳烷基磺酸钠阴Darvan 3硫磺SC25木质素磺酸钙阴Darvan 4WP 26羧酸酯聚电介质钠阴Darvan 727羧酸酯聚电介质铵阴Darvan C28木质素磺酸钠阴Darvan No229聚甲基丙烯酸钠阴Darvan No730羧酸酯聚电介质钠阴Darvan No3131ABS-Ca阴Darvan 40432聚合的芳烷基磺酸钠阴Darvant No333聚合的芳烷基磺酸钙阴Darvant No434SNS（钠）阴Darvant No635低分子量聚合烷基萘磺酸钠阴Daxad 1136高分子量聚合烷基萘磺酸钠阴Daxad 1937聚合烷基萘磺酸钙阴Daxad 21WP 38羧酸酯聚电介质钠阴Daxad 3039萘磺酸胺阴Demol AS40特种萘磺酸盐阴Demol C41C4～C11烯烃与马来酸酐共聚物钠盐阴Demol EP SC42聚合羧酸酯盐阴Demol P或Disorl H1243双萘磺酸钠甲醛缩合物阴Demol RN或Dispersol T或Disorl SH44特种酚磺酸甲醛缩合物阴Demol SS45NSAE阴Dispersol AC 46烷基萘磺酸钠阴Dispersol L 47APES阴Disorl WK48萘磺酸酚醛缩合物钠盐阴DYAPOL PFS49酚缩合物磺酸盐阴DYAPOL PT 50NPEPO4(酸式）阴Emcol CS-14151有机磷酸酯阴Emcol CS-136或Emcol CS-143或Emcol CS-151或Emcol CS-16552ABS-Ca阴Emcol P-1020BU或Emcol P-5020B或Emcol P-5020EG53ABS-NH4阴Emcol P-104554NSAE-丁基阴Emkabase BNS或Emkabase BNS 粉55NSAE-壬基阴Emkabase NNS56顺丁烯二酸酐和异丁烯共聚物钠盐阴EMPICRYL APD SC57By（30）非Emulphor EL-620 58By（40）非Emulphor EL-719 59By（200）非Emulphor EL-98060N-甲基．椰子油基．双（2-羟乙基）氯化铵阳EthoQuad C1261N-甲基．椰子油基．聚氧乙烯（x+y＝15）氯化铵阳EthoQuad C/2562N-甲基．油基．双（2-羟乙基）氯化铵阳EthoQuad O/1263N-甲基．十八烷基．聚氧乙烯（x+y＝15）氯化铵阳EthoQuad 18/2564RPEPO4TEA非/阴Geronol TZ/14或GeronolTZ/2或Geronol TZ/CSC65APE非Geronol TZ/B SC66EO-PO嵌段共聚物/DBS-Ca非/阴Geronol TZ/A SC67聚合羧酸钠与润湿剂混合物阴/阴Geropon TA/72或GeroponTA/76468聚合羧酸钠阴Geropon TA/72/S69聚合共聚物钠盐和阴离子混合物阴/阴Geronol SC/211或Geronol SC/21370甲酚甲醛缩合物阴HOE S1494 71DBS-Ca阴HOE S1560 72石腊羟磺酸盐阴HOE S1557 73ABS-Ca阴HOE S198474RPEPO4K阴HOE S2971或HOES297275木质素磺酸盐阴HOE S323476STPEPO 4TEA 阴HOE S347577SNMT （油酰）阴Hostapon CT 糊或Hostapon T 糊或Hostapon T 粉或Igepon AG-78或Igepon T-33或Igepon T-43WG 78SNMT （月桂酰）阴Igepon T-51或Igepon T-71或Igepon T-73或Igepon T-74或Igepon T-7779SNMT （椰子油酰）阴Igepon TC-4280SNMT （妥尔油酰）阴Igepon TK-3281SNMT （棕榈油酰）阴Igepon TN-7482SNMT （肉豆蔻酰）阴Igepon TM-4383黄聚酸胶XG 阴Kelran S 或Kelzan D35或Kelzan S SC84POE 不饱和甘油酯非Lanstar FG30或Lanstar FO 85POE(2)氢化牛脂胺非Lanstar HTM-286POE(30)氢化牛脂胺非Lanstar HTM-3087POE （10）椰子胺非Lanstar NM-1088By非Lanstar RO-160或Lanstar RO-30或Lanstar RO-40或Lanstar RO-7589POE （15）牛脂胺非Lanstar TA-1590POE （2）牛脂胺非Lanstar TA-291POE （40）牛脂胺非Lanstar TA-4092POE （5）牛脂胺非Lanstar TA-593POE （7）牛脂胺非Lanstar TA-794POE （10）牛脂胺非Lanstar TDA-1095ASS-二辛基阴Lanstar SET-60或Lanstar SET-70或Lanstar SKA-70或Lanstar SMW-60或Lanstar SPG-60或Lanstar SPG-7096脂肪醇EO 加成物非LUTENSOI ON110或LUTENSOI ON50或LUTENSOI ON70或LUTENSOI ON80或LUTENSOI TO12或LUTENSOI TO5或LUTENSOI TO7或LUTENSOI TO8或LUTENSOI TO8997DNPE非MACOLDNP5/DNP10/DNP15/DNP50/DNP150或MAKONDN50/DN70WG、EC、SC、SE98NPE非MACOL N110或MACOL N120或MACOL N130或Marlophen NP99STPE非MACOL TP100或MACOL TP60100木质素磺酸钙阴Marasperse C或Marasperse C-21或Marasperse CE101木质素磺酸钠阴Marasperse CB或Marasperse C BOS-3或Marasperse 52CP或Marasperse I或Marasperse N或Marasperse N-22或Marasperse 41G3102DNPE8非Marlophen DNP8 103DNPE18非Marlophen DNP18 104DNPE30非Marlophen DNP30 105NPEPO4酸式阴Marlophor NP酸106NPE5PO4酸式阴Marlophor NP5酸107NPE6PO4酸式阴Marlophor NP6酸108NPE7PO4酸式阴Marlophor NP7酸109NPE20PO4酸式阴Marlophor NP20酸110DAPEPO4亲油基芳香基阴MONAFAX 057或MONAFAX 785或MONAFAX 786或MONAFAX 794111DAPEPO4亲油基脂肪基阴MONAFAX 060或MONAFAX 831或MONAFAX 939或MONAFAX 1214或MONAFAX L-10或MONAFAX H-15112DAPEPO4（钾）亲油基芳香基阴MONAFAX 872113EPE（EO-PO共聚物）非Monolan 2000或Monolan2500或Monolan 2800或Monolan 2900或Monolan4500或Monolan 6400或Monolan 6500或MonolanPB或Monolan PC或Monolan PT或Monolan8000E/80114EPE（EO-PO共聚物）CP浊点24℃非Monolan M115SNS阴Morwet D-425WG116烷基萘磺酸钠+烷基羧酸酯阴/阴Morwet EFW WG117单或双甲基萘磺酸钠阴Morwet M WG118By非Nalco L-357或Nalco L-1127或Nalco L-1218或Polyfac CO-36119APEF非Nalco L-710 120聚氧乙烯硬脂酸酯非Nalco L-1117121NSAS阴Nekal BA-75或Nekal BA-77或Nekal BX-78或Nekal BX-Dry122POE（4）苯乙基甲酚醚非Newcol 704123POE（7、5）苯乙基甲酚醚非Newcol 707124POE（10）苯乙基甲酚醚非Newcol 710125POE（14）苯乙基甲酚醚非Newcol 714126POE（23）苯乙基甲酚醚非Newcol 723127NSAE阴Newkalgen BX或Newkalgen BX-VY或Newkalgen BX-V或Newkalgen BX-C或PelexNB或Pelex NB-L或Petro11或Petro 22或Petro AA或Petro AG或Petro AGSpecial或Petro BA或PetroBPWP128POE（2）烷基醚磷酸酯阴Nikkol DDP-2129POE（4）烷基醚磷酸酯阴Nikkol DDP-4130POE（6）烷基醚磷酸酯阴Nikkol DDP-6131POE（8）烷基醚磷酸酯阴Nikkol DDP-8132POE（10）烷基醚磷酸酯阴Nikkol DDP-10133DBS-Ca阴Ninate 401或Ninate 402 134ASS-二辛基阴Ninate DS-70135ABS-Ca阴Ninate L70或Ninate R63或Ninate R70或Phenyl Sulphonate CAX或Phenyl Sulphonate CAL-X或Polyfac 8110136聚羧酸酯钠阴Ninate PA137DBS-Ca阴NANSA EVM50或NANSA EVM62H或NANSA EVM70或NANSA EVM70/B或NANSA EVM70/C138木质素磺酸胺阴Orzan A139木质素磺酸钠阴Orzan LS或Orzan LS-50或Orzan P或Orzan S或Polyfon T或Reax 15B140ASS阴Pelex CS或Pelex OT-P或Pelex OT-P30或Pelex TR141有机磷酸酯阴Pelex RP 142NSAE+非离子非/阴Petro ADS143石油磺酸盐阴Petronate CR或Petronate HL或Petronate L144EPE非Pionin D112~D173或Polyfac BC1646或PolyfacBC1825145APEF非Pionin D610~D710 146烷基胺聚氧乙烯醚非Pionin D3105~D3510 147烷基酰胺聚氧乙烯醚非Pionin D4106~D4515148EO-PO 嵌段共聚物非Pluronic PE10100或Pluronic PE10500或Pluronic PE3100或Pluronic PE4300或Pluronic PE6100或Pluronic PE6200或Pluronic PE6400或Pluronic PE6800或Pluronic PE8100或Pluronic PE9200或Pluronic PE9400或Pluronic RPE2510或Pluronic RPE2520或149脱糖牛皮纸木质素磺酸钠阴Polyfon F 或Polyfon H 或Polyfon O 150接枝的木质素聚合物磺酸阴Polyfon OD 151高度改性的牛皮纸木质素磺酸钠阴Reax 45A 或Reax 45B 或Reax 45DA 或Reax 45DTC 或Reax 45L 或Reax 45T 或Reax 80A 或Reax 80C 或Reax 81A 或Reax 82或Reax 83A 或Reax 85A 152高度改性的牛皮纸木质素磺酸钠（无糖、钠盐）阴Reax 88B 153苯乙烯-丁二酸酐共聚物钠阴Scripset 500154苯乙烯-丁二酸酐共聚物钠 50000阴Scripset 520或Scripset 700155苯乙烯-丁二酸酐共聚物钠 20000阴Scripset 540156苯乙烯-丁二酸酐共聚物钠 10000阴Scripset 550157苯乙烯-丁二酸胺盐阴Scripset 720或Scripset 808158DBS-Ca阴Sermul EA-88或Soitem 5C/70159NPEPO 4阴Sermul EA-136160OPEPO 4阴Sermul EA-139161TSPEPO 4TEA阴Soitem 8FL 或Soitem 8FL/N 或Soitem 13FL/N 162聚合羧酸钠阴Soitem 70M M M163SNS阴Soitem 207WP164ArPEPO4阴Soprofor 3D33或Soprofor4D384165NPE非Soprofor BC20或SoproforBC23或Soprofor BC25或Soprofor BC30或SoproforBC40WP166APES阴Soprofor DSS11或Soprofor DSS5或SoproforDSS7WP、SC167SPEPO4TEA阴Soprofor FL或SoproforFL60SC168SPEPO4K阴Soprofor FLK SC 169OPE30非Soprofor OP30170APEPO4酸式阴Soprofor PA17或SoproforPA19SC171APEPO4阴Soprofor PA21或SoproforPA23SC172AES阴Soprofor PAS WP173AEPO4盐阴Soprofor PS17或SoproforPS19或Soprofor PS21或Soprofor PS23SC174ArPE非Soprofor S/4OP WP175聚羧酸钠阴Sopropon T36WP、SC、WG 176NPES阴Sorpol AP14S177NPEF非Sorpol APP200或Sorpol 300或Sorpol 350或Sorpol400178By n＝20非Sorpol CA20 179By n＝30非Sorpol 30 180By n＝50非Sorpol 50 181DBS-Ca阴Sorpol DB100182BPEF非Sorpol PPB150或Sorpol300183SPEF非Sorpol PTF200184木质素磺酸盐阴Sorpol 9047K WP、SC 185有机磷酸酯阴STEPFAC PN10WP、SC186SNS阴SUPRAGIL MNS90或SUPRAGIL NS90或SURFARON A1500SE或SURFARON A1543N100WP、SC、WG187烷基萘磺酸钠阴SUPRAGIL WP WP 188双异丙基萘磺酸钠阴SURFARON A1632N40189EO-PO嵌段共聚物非SYNPERONIC PE/L62或SYNPERONIC PE/L92或SYNPERONIC PE/L75190EPE非SYNPERONIC PE30/10或SYNPERONIC PE30/20或SYNPERONIC PE30/40或SYNPERONIC PE30/80或SYNPERONIC PE30/70或T-DET BP-1或TericPE61或Teric PE62191By非T-DET C-40192DNPE非T-DET D-70或T-DET D-150193聚合羧酸钠阴TAMOL 731或TAMOL 731-SD或TAMOL 850194SNS阴TAMOL 819或TAMOL 819L-43或TAMOL L-Conc或TAMOL SN或TAMOL NH或TAMOL NN或TAMOL NNO或TAMOL NOC或TensiofixCBZ195木质素磺酸盐阴Tensiofix IX196ABS-Ca阴Tensiofix KL或TensiofixTM197POE（9）十三醇醚非Teric 13A9 198APE非Teric 158199ArPE非Teric 160或Teric 161或Teric 163200DNPE非Teric DN或TrycolDNP150201有机磷酸酯（酸式）阴Tryfac 5556或Tryfac5573202TAEPO4K阴Tryfac 5571 203FAEPO4K阴Tryfac 5576 204DBS-Ca阴Witconate 605A 205ABS-Ca阴Witconate D24-25 206DBS-有机胺盐阴Witconate P1059207含氟表面活性剂阴Zonyl FSA或Zonyl FSC 或Zonyl FSP208含氟表面活性剂非Zonyl FSN乳化剂1EO 加成物/ABS-Ca非/阴AGRILAN A 或AGRILANANEC 2EO 加成物非AGRILAN AEC123EC 3RPE 非AGRILAN AEC145EC 、OF 4脂肪酸酯非AGRILAN AEC156EC 5EO-PO 共聚物复合物非AGRILAN AEC167或AGRILAN AEC178HEC 6APEF 非AGRILAN D54EC 7有机磷酸酯阴AGRILAN F5468有机磷酸酯复配物阴AGRILAN MC90HEC 9DBS-Ca 阴AGRILAN X-98或AGRILAN X-109EC10EO 加成物/ABS-Ca 非/阴Agrimul A-100EC,有机氯农药11EO 加成物/ABS-Ca 非/阴Agrimul A-300EC ，有机氯和有机磷12EO 加成物/ABS-Ca 非/阴Agrimul JM-5或Agrimul N-100或Agrimul N-300或Agrimul TL 或Agrimul52-B13EO 加成物/ABS-Ca非/阴Agrimul S-300HEC 14APE 非Agrimul 70-A15芳族EO 加成物非Agrisol PX401或Agrisol PX413或Agrisol PX425EC 16EPE 非Agrisol PC EC 、SC 17NPEPO 4阴Agrisol UEEC18聚氧乙烯脂肪醇醚硫酸胺阴Alipal AB-43619NPES阴Alipal CO-433或AlipalCO-52620NPES-NH 4阴Alipal CO-43621ABS-Ca 阴Alkamul AG-CA 22EO 加成物/DBS-Ca 非/阴Alkamul AG100/200成对乳化剂23EO 加成物/胺磺酸盐非/阴Alkamul AG300/400或Alkamul AG500/60024EO 加成物复配物非/非Alkamul AG700或Alkamul AG821或Alkamul AG82225DBS-Ca 阴Alkanate CS 26芳族有机磷酸酯阴Alkapent D10N 27DNPEPO 4阴Alkapent DNP60或Alkapent DNP10028有机磷酸酯阴Alkapent M10N 或Alkapent M60或AlkapentM100或Alkapent TD60或Alkapent TD10029有机磷酸酯游离酸阴Alkaphos 3或Alkaphos 6或Alkaphos 1030DBS-Ca阴Alkasurf AG-CA或Alkasurf AG-CAHF或Alkasurf CA或ARYLAN CA或Arnnate 46031By非Alkasurf CO系列32DNPE非Alkasurf DNP-10 33NPE非Alkasurf NP系列34OPE非Alkasurf OP系列35直链脂肪酸聚氧乙烯酯非Alrodynes 315或Alrodynes 610436DDT和马拉硫磷非/阴Alrodynes 8020 37DNPE7非Antarox DM-430 38DNPE9非Antarox DM-530 39DNPE15非Antarox DM-710 40DNPE24非Antarox DM-730 41DNPE49非Antarox DM-880 42DNPE150非Antarox DM-97043C12H25（EO）n H非Antarox RC-520或AntaroxRC-620或Antarox RC-630或Flo-Mo 5D或Flo-Mo6D或Flo-Mo 10D或Flo-Mo 14D或Igepal RC-520或Igepal RC-620或IgepalRC-63044OPE非Antarox CA系列45NPE非Antarox CO系列46DBS-NH3阴ARYLAN PWS47季胺盐（C8～C18,47%C12,18%C14)阳Arguad C48二甲基十四烷基苄基氯化铵阳Arguad DM14B49氢化牛脂二甲基苄基氯化铵阳Arguad DMHTB50季胺盐（C10～C16）阳Arguad DMMCB51二甲基双椰子油基氯化胺阳Arguad 2C-75％52季胺盐（C12～C18）阳Arguad 2HT-75％或Arguad T2C-50％或Arguad T-50％53季胺盐（C8～C18）阳Arguad S2C-50％或Arguad S-50％54POE失水山梨醇油酸酯和月桂酸酯非ATLOX 1045A55POE山梨醇六油酸酯非ATLOX 1086或ATLOX109656三甘油酯聚氧乙烯醚非ATLOX 1285 57烷基芳基磺酸盐阴ATLOX 3300B58POE失水山梨醇妥尔油酯/ABS-Ca非/阴ATLOX 3335B或ATLOX3386B氟乐灵EC、2．4DEC59NPE/DBS-Ca非/阴ATLOX 3400B氟乐灵EC60By/ABS-Ca非/阴ATLOX 4851B或ATLOX4855B氟乐灵EC61脂肪酸聚氧乙烯酯/ABS-Ca非/阴ATLOX 4856B62APE/ABS-Ca非/阴ATLOX 4857B63POE脂肪酸，树脂酸+POE失水山梨醇脂肪酯+ABS-Ca非/阴ATLOX 4858B64DBS-Ca阴ATLOX 4861B65By/DBS-Ca非/阴ATLOX 4868B66烷基聚氧乙烯醚非ATLOX 488167山梨醇油酸酯非ATLOX 488568烷基聚氧乙烯醚非ATLOX 489669APE非ATLOX 4898乐果EC70By非BEROL 106或BEROL 108或BEROL 19971NPE16非BEROL 278 72DNPE9非BEROL 269 73DNPE16非BEROL 272 74ABS-Ca（丁醇溶液）阴BEROL 822 75By（18EO）非BIO SOFT HR18 76By（33EO）非BIO SOFT HR33 77By（40EO）非BIO SOFT HR4078AEPO4阴Briphos CO6M或Briphos L2D或Briphos O3D79NPEPO4阴Briphos NP8D 80ABS-Ca阴CaFLON CAS70 81PEG1000单月桂酸酯非CITUROL 10ML 82PEG1000单油酸酯非CITUROL 10MO 83PEG1000单硬脂酸酯非CITUROL 10MS 84PEG200单月桂酸酯非CITUROL 2ML 85PEG200单油酸酯非CITUROL 2MO 86PEG200单硬脂酸酯非CITUROL 2MS 87PEG300单油酸酯非CITUROL 3MO88PEG400单月桂酸酯非CITUROL 4M ﹩L 89PEG400单油酸酯非CITUROL 4MO 90PEG400单硬酸酯非CITUROL 4MS 91PEG600单月桂酸酯非CITUROL 6ML 92PEG600单油酸酯非CITUROL 6MO 93PEG600单硬酸酯非CITUROL 6MS 94甘油单月桂酸酯非CITUROL GML 95甘油单油酸酯非CITUROL GMO 96甘油单蓖麻酸酯非CITUROL GMR 97甘油单硬脂酸酯非CITUROL GMS 98AEPO 4（油醇）阴Crodafos 0.2酸或Crodafos 0.5酸或Crodafos 0.1酸99AEPO 4（C 12/C 15醇）阴Crodafos 25D2酸或Crodafos 25D5酸或Crodafos 25D10酸100AEPO 4（C 13醇）阴Crodafos T2酸或Crodafos T5酸或Crodafos T10酸101AEPO 4（C 16醇）阴Crodafos CS2酸或Crodafos CS5酸或Crodafos CS10酸102取代酚EO 化物非DEHSCOFIX 906103有机磷酸酯非DEHSCOFIX 907104单取代酚EO 化物非DEHSCOFIX 908SC 、OF105单取代酚EO 化物非DEHSCOFIX 909106EO-PO 嵌段共聚物非DOWFAX 30C05或DOWFAX 30C10或DOWFAX 50C15或DOWFAX 63N10或DOWFAX 81N10107NPE 非DOWFAX 9N10或DOWFAX 9N12或DOWFAX 9N14/15108聚甘油油酸酯非Emcol 14109聚甘油硬脂酸酯非Emcol 18110DBS-Ca 阴Emcol P5020B 111ABS-Ca阴Emcol P5020EG 112EO 加成物非EMULAN A 或EMULAN AF 或EMULAN AF9或EMULAN ECO 或EMULAN OC 或EMULAN OK5或EMULAN OU 或EMULAN P 或EMULANPO113By 非EMULAN EL114C12H25O(EO)6H非Emulgen 106 115C12H25O(EO)8H非Emulgen 108 116C16H33O(EO)n H非Emulgen 210 117C18H37O(EO)n H非Emulgen 306P 118C18H35O(EO)n H非Emulgen 404 119C12～C14醇EO加成物非Emulgen 707 120OPE非Emulgen 810 121NPE非Emulgen 900系列122EPE =2000非Emulgen P-150 123EPE =2500非Emulgen P-230 124EPE =3000非Emulgen P-250 125EPE =8000非Emulgen P-290 126POE(20)油醇非Emulphor ON-870127脂肪酸EO加成物非Emulphor VN-430或Emulpon A128POE(9)硬脂酸非Emulphor VT-650129By非Emulpon EL18或Emulpon EL20或Emulpon EL33或Emulpon EL40或Emulsogen EL-360或Emulsogen EL-400130三甘油酯非/阴Emulsogen T 131SAS-Ca阴Emulsogen 1557 132油酸聚氧乙烯酯非Emulsogen A 133油酸聚氧乙烯醚非Emulsogen MS-12 134NPE非Emulsogen N系列135十八醇聚氧乙烯醚非Emulsogen O 136APE非Emulsogen E137POE（5）甘油硬脂酸酯非Ethofat 60/15138POE（10）甘油硬脂酸酯非Ethofat 60/20139POE（10）甘油树脂酸酯非Ethofat 142/20140POE（15）甘油树脂酸酯非Ethofat 142/25141POE（5）甘油可可油酸酯非Ethofat C/15142POE（15）甘油可可油酸酯非Ethofat C/25143POE（5）甘油油酸酯非Ethofat O/15144POE（10）甘油油酸酯非Ethofat O/20 MMMM145POE（15）甘油油酸酯非Ethofat O/25146阳Ethomeen C/12 147阳Ethomeen C/15 148阳Ethomeen C/20 149阳Ethomeen C/25 150阳Ethomeen O/12 151阳Ethomeen O/15 152阳Ethomeen S/12 153阳Ethomeen S/15 154阳Ethomeen S/20 155阳Ethomeen T/12 156阳Ethomeen T/13 157阳Ethomeen T/15 158阳Ethomeen T/20 159阳Ethomeen T/25 160阳Ethomeen T/50161叔胺EO化物 R＝牛脂基 3阳Ethomeen TD/13162叔胺EO化物 R＝牛脂基 5阳Ethomeen TD/15163十八烷基胺EO化物硬脂酸基2阳Ethomeen 18/12164十八烷基胺EO化物硬脂酸基5阳Ethomeen 18/15165十八烷基胺EO化物硬脂酸基50阳Ethomeen 18/60166非Ethomid HT/15 167非Ethomid HT/60 168POE（5）油酸胺非Ethomid O/15169成对乳化剂非/阴Eumulgin AT或EumulginBT170有机磷EC用成对乳化剂非/阴Eumulgin PA或EumulginPB171有机磷泛用乳化剂非/阴Eumulgin PL或EumulginPM172DBS-Ca阴Flo-Mo 50H或Flo-Mo60H173有机磷酸酯阴Flo-Mo 5BMP或Flo-Mo5BP174NPE6PO4阴Flo-Mo 6NP 175NPE9PO4阴Flo-Mo 9NP 176DNPE14PO4阴Flo-Mo 14DNP 177泛用（与2X）并用非/阴Flo-Mo 1X 178泛用（与1X）并用非/阴Flo-Mo 2X179泛用（与1X、2X）并用非/阴Flo-Mo 8X180脂肪烃有机磷酸酯阴GaFac BH-650或GaFac BI-729或GaFac BI-750181芳香烃有机磷酸酯阴GaFac PE-510 182NPE7PO4阴GaFac RE-410 183NPE10PO4阴GaFac RE-610 184NPE15PO4阴GaFac RE-870 185NPE m PO4阴GaFac RE-960 186DNPE7PO4阴GaFac RM-410 187DNPE10PO4阴GaFac RM-510188DNPE 15PO 4阴GaFac RM-710189芳香族有机磷酸酯阴GaFac RD-510190POE （6）十三醇磷酸酯阴GaFac RS-410191POE （10）十三醇磷酸酯阴GaFac RS-610192POE （15）十三醇磷酸酯阴GaFac RS-710193C 12～C 14醇EO 加成物非Genapol C 系列194C 16～C 18醇EO 加成物非Genapol O 系列195EPE EO=10非Genapol PF=10196EPE EO=20非Genapol PF=20197EPE EO=40非Genapol PF=40198EPE EO=80非Genapol PF=80199C 16～C 18饱和醇EO 加成物非Genapol T 系列200C 13H 26O （EO ）n H 非Genapol X 系列201APE+直链DBS-Ca+稳定剂非/阴Geronol FF/4或GeronolFF/6202NPEP 非Geronol 461P 或Geronol 487P 或Geronol 497P 或Geronol 575P 或Geronol 596P 或Geronol 678P 或Geronol 724P 203ABS-Ca 阴Geronol 60B 或Geronol70B204APE/ABS-Ca 非/阴Geronol FF/4205APE/ABS-Ca 非/阴Geronol FF/6与FF/4并用206APE/脂肪酸EO 加成物非/非Geronol MOE/2-N 207APEPO 4阴Geronol PRH4A 或GeronolPRH4B 208EO 化脂肪酸/ABS-Ca 非/阴Geronol RE/70209MPG-MEG EO/PO 缩合物非Geronol SC/138或GeronolSC167EC210EO 化胺/ABS-Ca 非/阴Geronol SN 211APEP/DBS-Ca 非/阴Geronol V/497212EO/PO 嵌段共聚物/ABS-Ca 非/阴Geronol V/87213EO/PO 嵌段共聚物非HOE S1816或HOE S1816-1或HOE S1816-2214脂肪酸聚氧乙烯醚非HOE S2436215脂肪酸聚氧乙烯酯非HOE S2439216RPEPO4K阴HOE S2971或HOES2972217NPE4PO4阴Hostaphat MDAR-N-040218有机磷酸酯阴Hostaphat MDAR或Hostaphat MDSA219泛用乳化剂非/阴Hymal N-5或Hymal PP-3或Hymal PP-5或HymalPP-15EC220HEC非/阴Hymal PP-2221NPE非Hyonic PE240或HyonicPE260222C13H27O(EO)n H非Hyonic PE360223EPE非Hyonic PPE-194或HyonicPPE-245224OPE非Igepal CA系列225NPE6非Igepal CO530 226NPE9非Igepal CO630 227NPE15非Igepal CO730 228DNPE非Igepal DM系列229RPE n P m非JBE 32或JBE 33或JBE35230有机磷酸酯阴Klearfac AA040或Klearfac AA270或Klearfac AA420231POE(3)C10醇非LANSTAR AL-13 232POE(3)C12～C15醇非LANSTAR AL-253 233POE(4)C12～C15醇非LANSTAR AL-254234POE不饱和甘油酯非LANSTAR FG-30或LANSTAR FO235POE(2)氢化牛脂胺非LANSTAR HTM-2 236POE(30)氢化牛脂胺非LANSTAR HTM-30 237泛用非LANSTAR LE-55 238山梨醇单油酸酯非LANSTAR MOS 239山梨醇单硬脂酸酯非LANSTAR MSS 240POE(10)椰子胺非LANSTAR NM-10 241NPE非LANSTAR NP系列242By（10EO）非LANSTAR RO-10 243By（12EO）非LANSTAR RO-12 244By（16EO）非LANSTAR RO-160 245By（30EO）非LANSTAR RO-30 246By（40EO）非LANSTAR RO-40 247By（75EO）非LANSTAR RO-75 248POE（15）牛脂胺非LANSTAR TA-15 249POE（2）牛脂胺非LANSTAR TA-2250POE （40）牛脂胺非LANSTAR TA-40251POE （5）牛脂胺非LANSTAR TA-5252POE （7）牛脂胺非LANSTAR TA-7253POE （10）牛脂丙烯二胺非LANSTAR TDA-10254脂肪醇EO 化物非LUTENSOL AO3255APE 非LUTENSOL AP10或LUTENSOL AP6或LUTENSOL AP7或LUTENSOL AP8或LUTENSOL AP9256NPE 非MACOL NP 系列257OPE 非MACOL OP 系列258DNPE非MACOL DNP5或MACOL DNP10或MACOL DNP15或MACOL DNP50或MACOL DNP150259POEC 13醇非MACOL TD610或MACOL TD10或MACOL TD12或MACOL TD100260DNPE 非MAKON DN50或MAKON DN70261APE 非MAKON N110或MAKON N120262脂肪酸酯非MARLOWET EF263聚氧乙烯烷基醚/DBS-Ca （直链）非/阴MARLOWET IHF 264APE非MARLOWET ISM 265聚氧乙烯羧酸酯/DBS-Ca （直链）非/阴MARLOWET OFA266阳Monazoline CY267阳Monazoline C268阳Monazoline O269阳Monazoline T270SPE 非NewKalgen C-120或NewKalgen C-150271泛用非/阴NewKalgen2585-Y 或NewKalgen3000A 或NewKalgen3000B 或NewKalgen3000C 272SPEP非NewLon D-6115P 273EPE 非NewPol PE61或NewPol PE62或NewPol PE64或NewPol PE68或NewPol PE74或NewPol PE75或NewPol PE78或NewPolPE88274亲水型乳化剂非/阴Paracol H 275亲油型乳化剂非/阴Paracol L 276与H 和L 并用非/阴Paracol M 277有机磷酸酯（酸式）阴Pestilizer A 278有机磷酸酯阴Pestilizer J279有机磷酸钠阴Pestilizer M 或PestilizerN280月桂醇聚氧乙烯醚磷酸三酯阴Phosphanol PL-1或Phosphanol PL-3或Phosphanol PL-8或Phosphanol PL-15281油酸聚氧乙烯酯磷酸三酯阴Phosphanol PO-4或Phosphanol PO-8或Phosphanol PO-20282壬基酚聚氧乙烯醚磷酸三酯阴Phosphanol PN-4或Phosphanol PN-6或Phosphanol PN-10或Phosphanol PN-14283脂肪醇聚氧乙烯醚磷酸酯阴Phospholan PDB-3284NPE9PO4阴Phospholan PNP-9285游离酸型有机磷酸酯阴Plysurf A207H或Plysurf A208B或Plysurf A208S或Plysurf A210G或Plysurf A212C或Plysurf A212E或Plysurf A215C或Plysurf A216B或Plysurf A217E或Plysurf A219B或PlysurfAL286与702并用非/阴Polyfac 701 287与704并用非/阴Polyfac 703 288与703并用非/阴Polyfac 704 289与708并用非/阴Polyfac 707 290与707并用非/阴Polyfac 708 291DBS-Ca阴Polyfac 8110 292APEPO4阴Polyfac 8170 293NPE非Polyfac 8200 294By非Polyfac 8240295丁基烷氧化物嵌段共聚物非Polyfac 8320296EPE非Polyfac 8321 297ABS-Ca阴Polyfac ABS-60C298有机磷酸酯阴Polyfac PN-109或PolyfacPN-209299PEG400塔尔油酸酯非Polyfac TDO-9300PEG(5)塔尔油单油酸酯非Polyfac TMO-5301PEG(7)塔尔油单油酸酯非Polyfac TMO-7302山梨醇单月桂酸酯非Radiosurf 7125或Radiosurf 7137303山梨醇单十六酸酯非Radiosurf 7135或Radiosurf 7136304甘油单硬脂酸酯非Radiosurf 7140或Radiosurf 7141305甘油单椰子酸酯非Radiosurf 7144 306山梨醇单硬脂酸酯非Radiosurf 7145307甘油-单-1、2羟基-硬脂酸酯非Radiosurf 7146308POE山梨醇单硬脂酸酯非Radiosurf 7147309甘油单油酸酯非Radiosurf 7151 310C13H27O(EO)nH12非Renex 30或Renex 35311C 13H 27O(EO)nH 15非Renex 31312C 13H 27O(EO)nH 6非Renex 36313脂肪醇聚氧乙烯醚非Renex 702或Renex 703或Renex 704或Renex707或Renex 711或Renex714或Renex 720或Renex751314DBS-Ca 阴Richonate 70或Richonate CS-6021H 315DBS-Ca （变性）阴Richonate CS-70316ABSTEA 阴Richonate 5725或Richonate S-1280或Richonate TAB 317亲水性乳化剂非/阴Sanimal H 318亲油性乳化剂非/阴Sanimal L 319与H 或L 并用非/阴Sanimal M 320非Sapogenat T-130321NPES 阴Sermul EA-54322NPE 15S 阴Sermul EA-146323月桂醇硫酸钠阴Sermul EA-150324POE （10）月桂醇硫酸钠阴Sermul EA-151325NPE 10PO 4阴Sermul EA-188326NPE 50PO 4阴Sermul EA-205327NPE 6PO 4阴Sermul EA-211328POE （3）月桂醇醚磷酸酯阴Servoxyl VPAZ100329POE （3）十三醇醚磷酸酯阴Servoxyl VPDZ3/100330POE 油醇醚磷酸酯阴Servoxyl VPFZ100331POE （7）十六和十八醇醚磷酸酯阴Servoxyl VPGZ7/100332丁基醚磷酸酯阴Servoxyl VPIZ100333NPE 4PO 4阴Servoxyl VPNZ4/100334NPE 5PO 4阴Servoxyl VPNZ5/100335NPE 10PO 4阴Servoxyl VPNZ10/100336NPE 15PO 4阴Servoxyl VPNZ15/100337DNPE 9PO 4阴Servoxyl VPQZ9/100338POE （4）十八醇醚磷酸酯阴Servoxyl VPSZ4/100339POE （3）辛醇醚磷酸酯阴Servoxyl VPT3/85或Servoxyl VPTZ3/100340POE （1）庚醇醚磷酸酯阴Servoxyl VPWZ1/100341改性酸式有机磷酸酯阴Servoxyl VPYZ500342乳化剂对（EC）非/阴Soitem 101或Soitem 150或Soitem 251或Soitem257343三氯杀螨醇EC非/阴Soitem 115344三氯杀螨醇混剂EC非/阴Soitem 258345与101或251并用非/阴Soitem 520346乳化剂对非/阴Soitem 999347敌稗（35％EO）非/阴Soitem EP/15/A3482EO椰子胺非SOPROMINE C123495EO椰子胺非SOPROMINE C1535010EO椰子胺非SOPROMINE C2035115EO椰子胺非SOPROMINE C253522EO油酸胺非SOPROMINE O123535EO油酸胺非SOPROMINE O1535410EO油酸胺非SOPROMINE O2035515EO油酸胺非SOPROMINE O253562EO牛脂胺非SOPROMINE S123575EO牛脂胺非SOPROMINE S1535810EO牛脂胺非SOPROMINE S2035925EO牛脂胺非SOPROMINE S353608EOβ-萘酚非Soprophor 131EC、SE 3616EOβ-萘酚非Soprophor 132EC、SE 3623EO脂肪醇油酸酯非Soprophor 208EC363环烷基胺烷基芳基磺酸盐阴Soprophor 2283364ArPEPO4阴Soprophor 3D33或Soprophor 4D384SC、WP36520EO松香酸非Soprophor 64 366ABS-Ca（枝链）阴Soprophor 70367聚氧乙烯油酸酯非Soprophor A或SoprophorAP3685EO脂肪醇油酸酯非Soprophor AS5369NPE非Soprophor BC4或Soprophor BC5或Soprophor BC6或Soprophor BC7370ArPE,有机磷EC非Soprophor BSU 371TSPE20非Soprophor CY/3 372DPE11非Soprophor D11B 373DPE5非Soprophor D294 374DPE6非Soprophor D6B 375DPE7非Soprophor D7B 376DPE8非Soprophor D8B377DPE 9非Sorprophor D9B 378ArPE 非Sorprophor DS15379APES 阴Sorprophor DSS11或Sorprophor DSS3或Sorprophor DSS5或Sorprophor DSS7EC 、SE 、WP380By （10EO ）非Sorprophor HR10EC 381By （40EO ）非Sorprophor HR40EC3823EOC 12～C 14醇醚非Sorprophor LA303834EOC 12～C 14醇醚非Sorprophor LA403844EOG 12～G 14醇醚非Sorprophor LA42385OPE 10非Sorprophor O 386OPE 14非Sorprophor OP14387OPE 15非Sorprophor OP15388OPE 30非Sorprophor OP30389脂肪醇聚氧乙烯醚磷酸酯阴Sorprophor PA17或Sorprophor PA19或Sorprophor PA21或Sorprophor PA23SC390ArPE 有机磷EC 乳化剂非Sorprophor S25391BPE非Sorpol PPA-150或SorpolPPA-300392SPE 非Sorpol PT-100或Sorpol PT-150或Sorpol PT-200或Sorpol PT-260393（与L550并用）非/阴Sorpol H770394（与L660并用）非/阴Sorpol H880395AEC 用（含水EC ）非/阴Sorpol KD 或Sorpol KF 或Sorpol KM 或SorpolKS396（与H770并用）非/阴Sorpol L550397（与H880并用）非/阴Sorpol L66039850％杀草丹EC 用非/阴Sorpol SNX 39950％对硫磷EC 用非/阴Sorpol 144C 40050％马拉硫磷EC 用非/阴Sorpol 200C 40150％甲基对硫磷EC 用非/阴Sorpol 200E 402HEC 用（泛用）非/阴Sorpol 355403泛用乳化剂非/阴Sorpol 560或Sorpol 1500404异稻瘟净EC 非/阴Sorpol 288740550％杀螟硫磷EC 等非/阴Sorpol 3005X 406OF 乳化剂非/阴Sorpol 3773或Sorpol3969OF407SC乳化剂非/阴Sorpol 3032或Sorpol3032A或Sorpol 3032N或Sorpol 3105SC408APEPO4阴Sponto 168D409（HEC）非/阴Sponto 226或Sponto 228或Sponto 900410亲油型（与234并用）非/阴Sponto 232或Sponto232T411亲水型（与232并用）非/阴Sponto 234或Sponto234T412亲油型非/阴Sponto 300T 413亲水型非/阴Sponto 500T414农药-化肥联用非/阴Sponto -551-85或Sponto -551-85或Sponto -555-66A或Sponto -555-66B或Sponto -603-91A或Sponto -603-92B或T-MULZ 3HF 或T-MULZ 4AF415植物油用非/阴Stepanform HP-95 416羟油用非/阴Stepanform HP-116 417十三醇聚氧乙烯醚非Sterox AJ418塔尔油聚氧乙烯酯非Sterox CD419POE（6）十二烷基酚醚非Sterox DF420POE（10.5）十二烷基酚醚非Sterox DJ421NPE非Sterox ND或Sterox NJ或Sterox NK422聚氧乙烯烷基硫酚醚非Sterox SK 423EO化脂肪胺阳Surfarox MS 424有机磷酸酯阴A1327K80425EO化脂肪醇非Synperonic 91/6或Synperonic 91/8或Synperonic A7或Synperonic A11426NPE非Synperonic NP系列427NPE6非Syntopon A 428NPE4非Syntopon A100 429NPE8非Syntopon B 430NPE12非Syntopon D2 431NPE13非Syntopon E432有机磷酸酯阴T-MULZ 734或T-MULZ734-Z433亲水、泛用非/阴T-MULZ H 434亲油、泛用非/阴T-MULZ L 435（马拉硫磷EC ）非/阴T-MULZ Mal-1S 436（马拉硫磷HEC ）非/阴T-MULZ Mal-S 437与W 并用非/阴T-MULZ O 438泛用非/阴T-MULZ T-H 439与O 并用非/阴T-MULZ W 440泛用及HEC 非/阴Tensiofix B7416或Tensiofix B7425441泛用非/阴Tensiofix B7453442DDVP 用非Tensiofix DW Ⅲ443氧乐果EC 非/非Tensiofix N20200444马拉硫磷非/阴Tensiofix PM 445与TD 并用非/阴Tensiofix TA 446有机磷酸酯阴Tensiofix XN·6或Tensiofix XN ·10或Tensiofix XN ·14447泛用非/阴Tensiofix B8426448泛用（HEC ）非/阴Tensiofix B7416SP 449泛用（HEC ）非Tensiofix 26100450非Tergitol 12-P-9451非Tergitol 12-P-12452仲醇EO 加成物非Tergitol 15-S-9453EPE （ 2500）非Tergitol XD 454EPE （ 3500）非Tergitol XH 455EPE （ 2300）非Tergitol XJ 456C 16～C 18醇聚氧乙烯醚EO8非Teric 17A 8457C 16～C 18醇聚氧乙烯醚EO10非Teric 17A 10458C 16～C 18醇聚氧乙烯醚EO13非Teric 17A 13459C 16～C 18醇聚氧乙烯醚EO25非Teric 17A 25460POE （2）十八烷基胺非Teric 18M 2461POE （5）十八烷基胺非Teric 18M 5462POE （10）十八烷基胺非Teric 18M 10463POE （20）十八烷基胺非Teric 18M 20464POE （30）十八烷基胺非Teric 18M 30M M M465有机氯农药EC 非/阴Teric EP1或Teric EP2或Teric EP3或Teric EP4或Teric EP5或Teric EP6或Teric EP7或Teric EP8或Teric EP9或Teric EP10或Teric EP11或Teric EP12或Teric EP13或Teric EP14或Teric EP15或Teric EP16或Teric EP17或Teric EP18或Teric EP19或Teric EP20或Teric EP21或Teric EP22或Teric EP26或Teric EP27或Teric EP28或TericEP31或Teric EP3246620％二嗪磷 EC 非/阴Teric EP2346750％马拉硫磷 EC 非/阴Teric EP244682、4、5T EC 非/阴Teric EP33469除草剂 EC 非Texofor D 系列或TexoforF 系列470NPE 非Texofor FN 471APE 非Texofor FP472ABS-Ca 阴Toxanon C-70或ToxanonSAB-Ca473SPEP非Toxanon JBE-32或Toxanon JBE-33或Toxanon JBE-35474有机磷非/阴Toxanon P-8H 或Toxanon P-8L 或Toxanon P800H 或Toxanon P800L 或Toxanon P9*******％杀螟硫磷EC 非/阴Toxanon P9*******％甲基对硫磷EC 非/阴Toxanon P925477有机氯农药EC 泛用非/阴Toxanon 300478有机氯EC 非/阴Toxanon 600A 479泛用乳化剂非/阴Toxanon 700480有机磷泛用非/阴Toxanon 808Z 或Toxanon 888或Toxanon 905或Toxanon 950481机油乳剂非/阴Toxanon 860A 48240％乐果EC 非/非Toxanon 100348350％DDVP EC非/阴Toxanon 1202484泛用非/阴Toxanon 2000A 或Toxanon 2000B 或Toxanon 2000C 或ToximulA 或Toximul AP485乳化剂对（亲油型）非/阴Toximul D 486乳化剂对（亲水型）非/阴Toximul H 487高闪点（亲水型）非/阴Toximul H-HF 488杀虫剂-化肥联用非/阴Toximul LF 489有机磷（马拉硫磷、对硫磷）非/阴Toximul MP 490HEC 非/阴Toximul MP-8或Toximul MP-10或Toximul MP-26或Toximul 713或Toximul 715或Toximul 716或Visco M-7或Visco M-10491高闪点EC 非/阴Toximul MP-HF 或Toximul R-HF 492对硫磷非/阴Toximul P 493甲基对硫磷非/阴Toximul Q494成对乳化剂非/阴Toximul R 或Toximul S 495乐果EC 非/阴Toximul 60A 或Toximul60B496有机氯农药EC非/阴Toximul 360A 或Toximul360B497高闪点非/阴Toximul 360B-HF 498泛用非/阴Toximul 500或Toximul 600或Triton X-160或Triton X-161或Triton X-700或Triton X-800或Visco 110-S 或Visco 220-N499植物油浓缩物用非/非Toximul 720500敌稗EC 阴/阴Toximul 804501石蜡喷雾油用非/非Toximul 850或Toximul854502植物油用非/非Toximul 852503EPE非Toximul 8321或Toximul 8322或Toximul 8323504植物油浓缩物非/阴Triton X-300505DNPE8非Trycol DNP-8506DNPE 非Trycol DNP-150507NPE30非Trycol NP-30508POE （11）十三醇醚非Trycol TDA-11509POE （12）十三醇醚非Trycol TDA-12510POE （18）十三醇醚非Trycol TDA-18511POE （8）硬脂酸酯非Trydet SA-8512POE （9）硬脂酸酯非Trydet SA-9513POE （40）硬脂酸酯非Trydet SA-40514POE （9）双油酸酯非Trydet DO-9。

MBR1045中文资料

MBR1035-MBR1060MBR1035 - MBR1060, Rev. A©1999 Fairchild Semiconductor CorporationMBR1035 - MBR1060, Rev. ATRADEMARKSACEx™CoolFET™CROSSVOLT™E 2CMOS TM FACT™FACT Quiet Series™FAST ®FASTr™GTO™HiSeC™The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.As used herein:ISOPLANAR™MICROWIRE™POP™PowerTrench™QS™Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8TinyLogic™1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a lifesupport device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status Definition Advance InformationPreliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Formative or In DesignFirst ProductionFull ProductionNot In ProductionDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.。

二,三极管,IC印字对型号

贴片3个脚C001A06M073QFN-6封装IC表面编码CCQ09KE7E0AR982 SOT-14361HL SOT-143B83 4脚10A1022A15F5H3 F5HE222 SOT-23MARK为ECIG,封装为SOT-23BU1H SOT-32339BBAEAO4MQU，封装为SOT-23的ICB8SN7 SOT-23封装,丝印:B8TX4 SOT-23封装,丝印:W2H SOT-23封装,丝印:ZTW SOT-23封装,丝印:L231 SOT-23封装,丝印:EA2 SOT-23封装,丝印:8F SOT-23封装M762SCD7BE30CN61110 8ZFJKB1 FJJK5TFT 3H0015BA7sot-23封装的，上标是X1YV与他垂直是10，标有A1FV与他垂直是16的是什么管子贴片二极管上写着ZE20J贴片二极管CCD MZ贴片二极管第一行03A 第2行F6 5D 贴片二极管ACXK7JA SOT-23C251A5V的稳压芯片，贴片封装,印字为8C032NCSN36WD.PS3J7P03BXPD:P62ZA7S3KW8C032J727EIWCAFPLAFPLE601 E60528C26XBLYAP2ABNJKS5RSOT23封装的丝印28G2GBAs87 BAs88 BAs89W3W贴片二极管封装是1206的丝印是T72是什么型号SOT－23的上面标有OOOI贴片二极管标有16LE400BC，封装SOT-23丝印Txw3F，这个x看不清，像0也像U，用x代替了与二极管上面写着D写或5.5SOT-89的，上面丝印为：BD S2L 和DD S3F 2314贴片三极管印字76ee,8626贴片三极管标HG18SSD73W SOT-2312W SOT-23Y6W SOT-23CB2C22A15 22B12 10A10BAT99 BAT98 BAT97 BAT9A BAT9B BAT9C BATA1 BATA2 BATA3 丝印BAU6X,BAU72.BAU79.BAU61 BAU62 BAU63 BAU64 BAU65 BAU66 BAU67 C2F G535A 0MN010TC28PC30AC33BC33MDGHGE36LEC11EIJFE33UE33JE33NE30BE30AE30HE33H7KFG7KFDE50HE50AMD5-3070FB7DEKE50HE50A65Z5662K59GC59I6D3GK6337AJAEDJGEDJJA08TA07TC28JC33B65XB65X865X265ZD2108B501CAPJA65E965K5C22AC33AC27HC28JA5GVE33HE33JE50TE33QE33VE33NE33LL56TL50TL40TL50EL36TL33TL45TM153BAt88 BAt89 BAt8A BAt8B BAT99 BAT98 BAT97BAT9A BAT9B BAT9CBATA1 BATA2 BATA3BAUA7 BAUA8 BAUA9 BAUAA BAs84 BAs83 BAs82BAP66 BAP76 BAP86A006/A007/A00X 009x 00AXC34BAB75EDT72X31N5JI54HH3A08GAPJA5AGJ5CFK5BHJ5BGJ5BFE5BJC65Z5662K54FKXD2859GC59I6AAB66S65265T365XB65X865X2662166226337AJADGHG7KFG7KFD70FB7DEKE50HE50AE50G13HGB6WL50PL33D75FE7AIK DBILE28NE30NE33U 21008 0622-50 501C501DE50N 853050189 RM06 8805/50 8806 2100BC22AC33AC33BE5SAR113BM7SE2HTB17064A65AT8A4sS1gZBBF3A03B85212ZK7M4K7B01FP8A8U9VW0843WMos W04 A7N Y2K N28 N29 33W LD3 M36 B3 HT56 6CW 15H M6G2 LEY2 W2W W1P 1PK NB46 NB43 ACA30 W2D 518A ND55 PD54 618 L6HN 501 GTF 6T1AK 007F NS65 5Ct V30 A6t WV5 NF DM CEQ P11DFRD KQ49 BJT2G PC55 NU79 E33M CFRE OK59 3I38 AZO X1YV A1FV A1YQ 113N M43B 1301 1FW A43Ft 303 A7W Z3W 304 DB3 1FT 5CW J3076 M4B S401 A2SM U1J 6.7Y NB30 WUS ADW63 SAW AAX M5C LC99K 024W T1a88 6Dt3EEt0635K462FN KYZ-U5 TS52FV GJ-YQ2 12PKJXHA6N8UN ZCW14 ZDW05 L05W2T GLV18E119AB 3515 D2E02 2F5R31E HD2K DV5D019I A4W14 K72x7 1A15 W1AK1NM6 J6YA013 HY30L33 076A S2AD K6LD310M43tH2FH1P BWAMPA09TA1215 A3WKA12A09RAR8A2BVA2BNL4WYDHR5A DBRV KYZ-U5 UPRX DKQG CY DKRNALBLBDS2L DDS3F KA Bon IYAQY39 46 47 64 BEQEYL 9X AE RW BQ028C621 GY721 DJ 56NS 13 39 97 93 78 501C4B 0C FL 38 8A 109 M0NKZ1Z58A1YQN502 JStN6I0N N019N 358A08K TIA13 016JK46662L65ZB SO-1R KK9 SOIBB 20952 A7HG13WB56M13KK9008C WT8 8512 8525 431M HH85 sSNW6WW6YS6P3C S4K7C507723K30AJHJM425 T2 955E 6TMAA21K52116APK72 V1W32JA6SUBFS00BM0ZM15B252X4YAEL15N620IM2603WM6450 W13460 WA3453 WK1450 WL2AHA60DSAGHSAGFA7v9G7ZGGGB3t8BVBGGA006ESALAZP2247HA69w1702A7XK8CM3YXOBVAN51CP2HD55A09EO1V015C 015G TACUVLRCJ4BW2X1PVC01ABJLDSTs12WPDTC114TK1CW 1Cp511BKD JFBHDN81YAEAL0.138S72XF8W1KY 8B6A1SSHA2SSHK20BD RKC019V2GBFA1y396yxR12R52 CE资料引2012-03-05,15:54:08“05645”或者“05646”的5脚IC 05619N153C54SOT23-5封装的，丝印是7NH1 JSAREL33，封装“SOT-23-5”A7CAAGAAPH4KJVY6WF SC70-5A18uB02GK11F SOT-23-5BF65 SC70-5A15358BWVC 11 66M117M305芯片表面打“15”，SOT23-5封装表面打“16”，SOT23-5A5485BUWMDJX sot-23-573JU73GJ73JE5个脚上面印的是90B27LDARAAR91G122背光IC,丝印是506CA25EFJ59AVMR 或者VMKH1JE7EFAT2DP T2FFB48Y51EJSARA4AA12ASC20AA16A805 封装:SOT23-5TF06LB21H237XB 37XAF2CA45CBBCSACDPdaacm 五脚15THC397H2A63AMDJXDAG1H DAGOZE30E30/BJXB1YAB1UDSACG9R表面印字C6PH和C6SF丝印打FVG SOT23-55脚标记FANT电源的芯片一个是SOT23-5的，丝印是A60yE；8JAA8JAB8JAC8JB18JB28JB38JB48JB58JB6B3A,sot-25;AASOT-23-5 印字:THHD芯片丝印CR0810-AIC上面丝印是20A32和32A22，SOT25封装芯片上印BES灯控IC 上面写着LTYN丝印：AYAC ,封装:SC70丝印为ICPDAS ST-01 数I6GBHODO 0D0AD4RDZLWAABAADDABONADKQBLHAB10A 23-5HIJEBUF60B8E SOT23-5AAF33SA8JTE6TLTH72YL6ACA90A772A777A773丝印名为L30L或L30K,封装为SOT-23-55脚电源贴片IC（SOT-23-5）丝印4XX9;4XX5 丝印D1924的SOT-23-5封装的元件BPSQ SOT-23-5UQRW sot-23-5电源贴片IC型号（IC上丝印ID97N）丝印代码为co - sow的5脚IC印字112HX 封装为SOT23-5的ic丝印为1A2G的,封装为SOT23-5,31R5 SOT-23-590B16 SOT-23-5.芯片上丝印psri,SOT-23-5321YCXBSOT-25封装的管子，上面印着EDZ JRJXC3EGDJ-8111128CA103印字ACCL SOT-23-5EQ6JT30TX50TU18HC2KLU50ACWWETF83S2A63334XK1 SOT-23-54XX1 SOT-23-54XZ1 SOT-23-54B21 SOT-23-5DG SOT-353-5(SC70)EG SOT-353-5(SC70)CG SOT-353-5(SC70)HG SOT-353-5(SC70)PSREGCLR,是五个脚的双排,ED2F DE9R ED4USOT23-5封装代码G85SOT23-5丝印为HA041F21 sot-23-5封装的IC型号LXZ6A2JBA1VRRT6C2YL7 SOT-23-59Aa1J，封装为TSOT23-5，9AaOb9Aa0N9AaRg贴片器件上面标着9Aa0Z9Aa3S SOT-23-59AaBJ9Aa0W9Aa0y9Aa0M5336FIN69DAWCO贴片5脚33R1摄像头用的电源IC，SOT-23-5, 丝印BQJV，1D2G 23-5封装M3KEM3KK5283EEQ6JLTNDC32F016m017T 017bBG2N5JR N5WOTF83Y52M 706IA87GMU7268116301263105AADLB71ADC31665DB50DB65UA50UAM1GHM1IJM3JGM3JAATX09ATX49印记：AAK80 封装：SOT-353 LTAFAL82M9B23F9DT SOT-23-5M073 SOT-23-3L113X113T113FR33H9Ab2xX733M530FA7K15THA307IT214IN6AEIC75BID9BBIC25KID7YWID8YWIC6YWIP39NA3XXB3YWC56AIN69DID99HID98AIP37CIC27CG3YWL33FCATBA207A2HIKDCWVFQ8CAW9X32JVAJL EACRSS 7Z25D 7Z08D LTIZ LTKH LTXZ LTBHT LTYN E5FM 1335x 135Ax 135x 13dx B7AL 8A118A12 8A13 8A14 LB24 BDV72 BDV73 BDV74 5509FLM A2HJA207 A2IK H10R30BC F10LS28G F20G E50EE50H E50G 2YL6 2YL42YL2 2YLA 5358A 5351A 7NIKH10r30BC H10G HX-NG L36H L50P L50U L50T DCJE 75FE L33S 7A22 L50H 7HJC L33H DDGH 73HB 75KG H1JH UN8HX 54B4 4XZ1A107 A19B H1JCH1IE 8A65 8A93 7NH1 8A74 8A6C KIHLA30L A37A HX-UG K103 H1KA HXN-HX HXN-AP HIHI XH8NU A3114XK3A2HJA207A2IK 5509BLM HX-NG KIHLH1JHS9VRN5RK F10VAJ16 YJAA ACA0C A18A30B4C104C103B6W70JC DHJBA311A71CA7JHB19D AA22 AA23 BAU72 BAU77 BAU75 M3JAM3JGK19J 016FK103C0210 CO-TOC 7AIK DBIL7A22L33S 5509BLMF18LHX-UGFILEC00XBCy618A8473FBDDGDBCy62BCy63BCy6473KD90B1790B189AaNYGGt313ID99CA11Y9AAONEQB9RBAA8LCGA0GBA3C BA3D BA3G G3AHG3JW5136A311A5IKA71CA7HJ5509BLM5509BLG4XK35509FLMA2HJA207A2IK7NHH8JA48JA68JAAHXN-XhF18EF10V4XZ1A17HA107HX-VG30B4CI04HX-NGKIHLA37aB19d2YL62YL42YL22YLAH1JCUN8HX54B4S9VHIIEK19jHIJH55B7016QN1CKHA2EHA2KG1-P1FB7G2N933R2SYS25SE.2E.57ZGGG, 是sot23-5的。

Kuppersbusch BP 6550.0S-CN烤箱说明书

目录1. 图标的说明 (5)2. 运输与包装 (6)3. 安全须知 (7)3.1 连接与操作 (7)3.2 开启与操作 (7)3.3 烤箱 (8)3.4 家长须知 (9)3.5 首次使用 (9)3.6 环境保护 (9)3.7 能源信息 (10)3.8 用户须知 (10)4. 清洁与保养 (11)4.1 产品表面 (11)4.2 烤箱门的清洁（不包括微波炉、微烤一体机） (13)4.3 高温热解自清洁的烤箱（部分型号） (14)5. 首次使用前的注意事项 (14)5.1 重要建议 (15)6. 配件 (16)6.1 可伸缩滑动搁架 (16)6.2 滑出式搁架 (17)6.3 烤箱配件的更换 (18)7. 维护 (18)7.1 烤箱灯的更换 (18)7.2 拆卸和装配烤箱门（微烤一体机除外） (19)7.3 拆卸和装配烤箱门内玻璃 (21)7.4 拆卸和装配烤箱侧边支架 (22)7.5 拆卸后部背板 (22)8. 烤箱结构 (24)8.1 操作面板——触摸控制及屏显 (25)8.2 设置时钟 (26)9. 烧烤与烹饪菜单 (26)29.1 烹饪指南 (26)9.2 烤肉指南 (30)9.3 烧烤指南 (32)9.4 烘焙探针建议温度 (33)9.5 低温烹饪指南 (34)10. 烤箱功能 (35)10.1 烹饪功能 (35)10.2 特殊功能 (36)11. 烤箱的操作 (38)11.1 开启/关闭烤箱 (38)11.2 待机模式 (38)11.3 首次使用烤箱前的设置 (38)11.4 选择烹饪功能 (39)11.5 选择特殊功能 (40)11.6 烹饪过程中更改设置 (40)11.7 自动功能 (41)11.8 更改食材重量和温度 (42)11.9 设置时间 (43)11.10 快速加热（出厂已激活） (47)12. 菜单收藏 (47)12.1 访问收藏设定 (47)12.2 存储菜单至收藏夹 (48)12.3 删除收藏菜单 (48)13. 其他功能 (48)13.1 设置演示模式 (48)13.2 童锁 (48)13.3 恢复出厂设置 (49)13.4 自动确认 (49)13.5 ECO模式 (49)13.6 开机音设置 (50)13.7 单位设置 (50)14. 烘焙探针 (51)14.1 烹饪功能中使用烘焙探针 (52)14.2 自动功能中使用烘焙探针 (52)315. 部分型号的特殊设置、其他功能与设置 (53)15.1 高温热解功能 (53)15.2 故障原因 (54)41.图标的说明我们的产品都是通过最新最好的技术来进行生产的，但是仍会有一些使用风险存在。

DNB6540中文资料

FEATURESs Double Side Cooling s High Surge CapabilityAPPLICATIONSs Rectification s Freewheel Diode s DC Motor Control s Power Supplies s Welding s Battery ChargersVOLTAGE RATINGSORDERING INFORMATIONWhen ordering, select the required part number shown in the Voltage Ratings selection table, e.g.:DNB65 40Note: Please use the complete part number when ordering and quote this number in any future correspondance relating to your order.DNB65Recifier DiodeReplaces January 2000 version, DS4175-2.0DS4175-3.0 August 2001450044004200400038003600DNB65 45DNB65 44DNB65 42DNB65 40DNB65 38DNB65 36ConditionsV RSM = V RRM + 100VLower voltage grades available.Type NumberRepetitive Peak Reverse VoltageV RRM VKEY PARAMETERS V RRM 4500V I F(AV)2590A I FSM31000AFig. 1 Package outlineSymbol Parameter Conditions Double Side CooledIF(AV)Mean forward currentIF(RMS)RMS valueIFContinuous (direct) forward currentSingle Side Cooled (Anode side)IF(AV)Mean forward currentIF(RMS)RMS valueI F Continuous (direct) forward currentUnitsMax.Half wave resistive load, Tcase= 100o C2000ATcase= 100o C3140ATcase= 100o C2800AHalf wave resistive load, Tcase= 100o C1284ATcase= 100o C2017ATcase= 100o C1715ACURRENT RATINGSTcase= 75o C unless otherwise statedSymbol Parameter Conditions Double Side CooledIF(AV)Mean forward currentIF(RMS)RMS valueIFContinuous (direct) forward currentSingle Side Cooled (Anode side)IF(AV)Mean forward currentIF(RMS)RMS valueI F Continuous (direct) forward currentUnitsMax.Half wave resistive load2590A-4068A-3727AHalf wave resistive load1940A-3047A-2656ATcase= 100o C unless otherwise statedSURGE RATINGSConditions10ms half sine; T case = 150o C V R = 50% V RRM - 1/4 sine 10ms half sine; T case = 150o CV R = 0Max.Units Symbol ParameterI FSM Surge (non-repetitive) forward current I 2t I 2t for fusingI FSM Surge (non-repetitive) forward current I 2tI 2t for fusing4.8 x 106A 2s31.0kA 3.075 x 106A 2s 24.8kA THERMAL AND MECHANICAL DATAdc ConditionsMin.Max.UnitsoC/W -0.025Anode dcClamping force 45.0kN with mounting compound Thermal resistance - case to heatsinkR th(c-h)0.003Double side -T vj Virtual junction temperatureT stg Storage temperature range Single side-Thermal resistance - junction to caseR th(j-c)Single side cooledSymbolParameter–55175oCForward (conducting)-oC -0.006oC/WoC/W Cathode dc-0.027oC/W Double side cooled-0.013oC/WClamping force40.048.0kN150Reverse (blocking)-oC 150CHARACTERISTICSForward voltage Peak reverse current ParameterµC -Q S Total stored charge Symbol V FM I RRM I RM Peak recovery current -500A 6000At V RRM , T case = 150o C-150mA - 1.45V At 3000A peak, T case = 25o C ConditionsTyp.Max.Units At T vj = 150˚C-V TO Threshold voltage r TSlope resistance0.19m ΩAt T vj = 150˚C -0.84V t rr Reverse recovery time 25-µs I F = 1500A, dI RR /dt = 25A/µs T case = 25˚C, V R = 100VCURVESFig.2 Maximum (limit) forward characteristicsFig.3 Dissipation curvesV FM Equation:-V FM = A + Bln (I F ) + C.I F +D.√I FWhereA = –0.36984B = 0.292197C = 0.000354D = –0.03111these values are valid for T j = 125˚C for I F500A to 10000Ajunction to caseFig.4 Surge (non-repetitive) forward current vs timeat T case 150˚C)PACKAGE DETAILSFor further package information, please contact your nearest Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE.Note:1. Package maybe supplied with pins and/or tags.POWER ASSEMBLY CAPABILITYThe Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor,and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and current capability of our semiconductors.We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers.Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete solution (PACs).DEVICE CLAMPSDisc devices require the correct clamping force to ensure their safe operation. The PACs range offers a varied selection of pre-loaded clamps to suit all of our manufactured devices. This include cube clamps for single side cooling of ‘T ’ 22mm Clamps are available for single or double side cooling, with high insulation versions for high voltage assemblies.Please refer to our application note on device clamping, AN4839HEATSINKSPower Assembly has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request.For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or Customer Services.CUSTOMER SERVICE CENTRESMainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33North America Tel: (613) 723-7035. Fax: (613) 723-1518.UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020SALES OFFICESMainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /Tel: (949) 733-3005. Fax: (949) 733-2986.UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020These offices are supported by Representatives and Distributors in many countries world-wide.© Dynex Semiconductor 2001 Publication No. DS4175-3 Issue No. 3.0 August 2001TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOMHEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln.Lincolnshire. LN6 3LF. United Kingdom.Tel: 00-44-(0)1522-500500Fax: 00-44-(0)1522-500550DYNEX POWER INC.99 Bank Street, Suite 410,Ottawa, Ontario, Canada, K1P 6B9Tel: 613.723.7035Fax: 613.723.1518Toll Free: 1.888.33.DYNEX (39639)This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injuryor death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.e-mail: power_solutions@Datasheet Annotations:Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.Advance Information: The product design is complete and final characterisation for volume production is well in hand.No Annotation: The product parameters are fixed and the product is available to datasheet specification.。

药用辅料中英文对照

药用辅料中英文对照1 阿拉伯胶(Acacia)2 乙酰舒泛钾(Acesulfame Potassium)3 冰醋酸(Acetic Acid,Glacial)4 乙酰枸橼酸三丁酯(AcetyltributylCitrate)5 乙酰枸橼酸三乙酯(AcetyltriethylCitrate)6 人血白蛋白(Albumin)7 乙醇(Alcohol)8 海藻酸(Alginic Acid)9 脂肪族聚酯(Aliphatic Polyesters)10 阿力糖(Alitame)11 杏仁油(Almond Oil)12 维生素E(Alpha Tocopherol)13 氨溶液(Ammonia Solution)14 维生素C(Ascorbic Acid)15 棕榈酸维生素C酯(Ascorbyl Palmitate)16 阿司帕坦(Aspartame)17 绿坡缕石(Attapulgite)18 皂土(Bentonite)19 苯扎氯铵(Benzalkonium Chloride)20 苄索氯铵(Benzethonium Chloride)21 苯甲酸(Benzoic Acid)22 苯甲醇(Benzyl Alcohol)23 苯甲酸苄酯(Benzyl Benzoate)24 溴硝丙二醇(Bronopol)25 丁羟茴醚(Butylated Hydroxyanisole)26 丁羟甲苯(Butylated Hydroxytoluene)27 羟苯丁酯(Butylparaben)28 碳酸钙(Calcium Carbonate)29 无水磷酸氢钙(Calcium Phosphate,Dibasic Anhydrous)30 磷酸氢钙二水合物(Calcium Phosphate,Dibasic Dihydrate)31 磷酸钙(Calcium Phosphate,Tribasic)32 硬脂酸钙(Calcium Stearate)33 硫酸钙(Calcium Sulfate)34 低芥酸菜籽油(Canola Oil)35 卡波姆(Carbomer)36 二氧化碳(Carbon Dioxide)37 羧甲纤维素钙(Carboxymethylcellulose Calcium)38 羧甲纤维素钠(Carboxymethylcellulose Sodium)39 角叉菜胶(Carrageenan)40 蓖麻油(Castor Oil)41 氢化蓖麻油(Castor Oil,Hydro-genated)42 微晶纤维素(Cellulose,Microcr ystalline)43 粉状纤维素(Cellulose,Powdered)44 微粉硅胶微晶纤维素(Cellulose, Silicified Microcrystalline)45 醋酸纤维素(Cellulose Acetate)46 纤维醋法酯(Cellulose Acetate Phthalate)47 角豆胶(Ceratonia)48 十八十六醇(Cetostearyl Alcohol)49 西曲溴铵(Cetrimide)50 十六醇(Cetyl Alcohol)51 壳聚糖(Chitosan)52 氯己定(Chlorhexidine)53 三氯叔丁醇(Chlorobutanol)54 氯甲酚(Chlorocresol)55 一氯二氟乙烷(Chlorodifluoroe-thane)56 氟里昂(Chlorofluorocabons)57 对氯间二甲酚(Chloroxylenol)58 胆固醇(Cholesterol)59 枸橼酸(Citric Acid Monohydrate)60 胶态二氧化硅（微粉硅胶）(Colloidal Silicon Dioxide)61 着色剂(Coloring Agents)62 玉米油(Corn Oil)63 棉籽油(Cottonseed Oil)64 甲酚(Cresol)65 交联羧甲纤维素钠(Croscarmellose Sodium)66 交联聚维酮(Crospovidone)67 环糊精(Cyclodextrins)68 环甲基硅酮(Cyclomethicone)69 苯甲地那铵(Denatonium Benzoate)70 葡萄糖结合剂(Dextrates)71 糊精(Dextrin)72 葡萄糖(Dextrose)73 邻苯二甲酸二丁酯(Dibutyl Phthalate)74 癸二酸二丁酯(Dibutyl Sebacate)75 二乙醇胺(Diethanolamine)76 邻苯二甲酸二乙酯(Diethyl Phthalate)77 二氟乙烷(Difluoroethane)78 二甲硅油(Dimethicone)79 二甲醚(Dimethyl Ether)80 邻苯二甲酸二甲酯(Dimethyl Phthalate)81 二甲亚砜(Dimethyl Sulfoxide)82 多库酯钠(Docusate Sodium)83 依地酸（乙二胺四乙酸）(Edetic Acid)84 乙酸乙酯(Ethyl Acetate)85 乙基麦芽酚(Ethyl Maltol)86 油酸乙酯(Ethyl Oleate)87 乙基香草醛(Ethyl Vanillin)88 乙基纤维素(Ethylcellulose)89 硬脂酸棕榈酸乙二醇酯(Ethylene Glycol Palmitostearate)90 羟苯乙酯(Ethylparaben)91 果糖(Fructose)92 富马酸(Fumaric Acid)93 明胶(Gelatin)29394 液体葡萄糖(Glucose,Liquid)95 甘油(Glycerin)96 山萮酸甘油酯(Glyceryl Behenate)97 单油酸甘油酯(Glyceryl Monooleate)98 单硬脂酸甘油酯(Glyceryl Monostearate)99 硬脂酸棕榈酸甘油酯(Glyceryl Palmitostearate)100 四氢呋喃聚乙二醇醚(Glycofurol)101 瓜耳胶(Guar Gum)102 七氟丙烷(HFC)(Heptafluoro-propane)103 海克西定(Hexetidine)104 烷烃类（HC) (Hydrocarbons)105 盐酸(Hydrochloric Acid)106 羟乙纤维素(Hydroxyethyl Cellulose)107 羟乙甲纤维素(Hydroxyethylmethyl Cellulose)108 羟丙纤维素(Hydroxypropyl Cellulose)109 低取代羟丙纤维素(Hydroxypropyl Cellulose,Low-substituted) 110 羟丙甲纤维素(Hypromellose)111 羟丙甲纤维素酞酸酯(Hypromellose Phthalate)112 咪唑烷脲(Imidurea)113 异丙醇(Isopropyl Alcohol)114 肉豆蔻酸异丙酯(Isopropyl Myristate)115 棕榈酸异丙酯(Isopropyl Palmitate)116 白陶土(Kaolin)117 乳酸(Lactic Acid)118 拉克替醇(Lactitol)119 乳糖(Lactose120 羊毛脂(Lanolin)121 含水羊毛脂(Lanolin,Hydrous)122 羊毛醇(Lanolin Alcohols)123 卵磷脂(Lecithin)124 硅酸镁铝(Magnesium Aluminum Silicate)125 碳酸镁(Magnesium Carbonate)126 氧化镁(Magnesium Oxide)127 硅酸镁(Magnesium Silicate)128 硬脂酸镁(Magnesium Stearate)129 三硅酸镁(Magnesium Trisilicate)130 苹果酸(Malic Acid)131 麦芽糖醇(Maltitol)132 麦芽糖醇溶液(Maltitol Solution)133 麦芽糖糊精(Maltodextrin)134 麦芽酚(Maltol)135 麦芽糖(Maltose)136 甘露醇(Mannitol)137 中链脂肪酸甘油三酯(Medium-chain Triglycerides) 138 葡甲胺(Meglumine)139 薄荷脑(Menthol)140 甲基纤维素(Methylcellulose)141 羟苯甲酯(Methylparaben)142 液体石蜡(Mineral Oil)143 轻质液体石蜡(Mineral Oil,Light)144 液体石蜡羊毛醇(Mineral Oil and Lanolin Alcohols)145 单乙醇胺(Monoethanolamine)146 谷氨酸一钠(Monosodium Glutamate)147 硫代甘油(Monothioglycerol)148 氮(Nitrogen)149 一氧化二氮(Nitrous Oxide)150 油酸(Oleic Acid)151 橄榄油(Olive Oil)152 石蜡(Paraffin)153 花生油(Peanut Oil)154 凡士林(rolatum)155 凡士林羊毛醇(rolatum and Lanolin Alcohols)156 苯酚(Phenol)157 苯氧乙醇(Phenoxyethanol)158 苯乙醇(Phenylethyl Alcohol)159 醋酸苯汞(Phenylmercuric Acetate)160 硼酸苯汞(Phenylmercuric Borate)161 硝酸苯汞(Phenylmercuric Nitrate)162 磷酸(Phosphoric Acid)163 波拉克林钾(Polacrilin Potassium)164 泊洛沙姆(Poloxamer)165 葡聚糖(Polydextrose)166 聚乙二醇(Polyethylene Glycol)167 聚氧乙烯(Polyethylene Oxide)168 聚(甲基)丙烯酸树脂(Polymethacr-ylates)169 聚氧乙烯烷基醚(Polyoxyethylene Alkyl Ethers)170 聚氧乙烯蓖麻油衍生物(Polyoxyeth-ylene Castor Oil Derivatives) 171 聚山梨酯(Polyoxyethylene Sorbitan Fatty Acid Esters)172 硬脂酸聚氧乙烯酯(Polyoxyethylene Stearates)173 聚醋酸乙烯酞酸酯(Polyvinyl Acetate Phthalate)174 聚乙烯醇(Polyvinyl Alcohol)175 苯甲酸钾(Potassium Benzoate)176 碳酸氢钾(Potassium Bicarbonate)177 氯化钾(Potassium Chloride)178 枸橼酸钾(Potassium Citrate)179 氢氧化钾(Potassium Hydroxide)180 焦亚硫酸钾(Potassium Metabisulfite)181 山梨酸钾(Potassium Sorbate)182 聚维酮(Povidone)183 丙酸(Propionic Acid)184 没食子酸丙酯(Propyl Gallate)185 碳酸丙烯酯(Propylene Carbonate)186 丙二醇(Propylene Glycol)187 海藻酸丙二醇酯(Propylene Glycol Alginate)188 羟苯丙酯(Propylparaben)189 糖精(Saccharin)190 糖精钠(Saccharin Sodium)191 芝麻油(Sesame Oil)192 虫胶(Shellac)193 二氧化硅二甲硅油(Simethicone)194 海藻酸钠(Sodium Alginate)195 抗坏血酸钠(Sodium Ascorbate)196 苯甲酸钠(Sodium Benzoate)197 碳酸氢钠(Sodium Bicarbonate)198 氯化钠(Sodium Chloride)199 枸橼酸钠二水合物(Sodium Citrate Dihydrate)200 环拉酸钠(Sodium Cyclamate)201 氢氧化钠(Sodium Hydroxide)202 月桂硫酸钠(十二烷基硫酸钠)(Sodium Lauryl Sulfate)203 焦亚硫酸钠(偏亚硫酸钠)(Sodium Metabisulfite)204 磷酸氢二钠(Sodium Phosphate,Dibasic)205 磷酸二氢钠(Sodium Phosphate ,Monobasic)206 丙酸钠(Sodium Propionate)207 羧甲淀粉钠(Sodium Starch Glycolate)208 硬脂富马酸钠(Sodium Stearyl Fumarate)209 山梨酸(Sorbic Acid)210 山梨坦酯Sorbitan Esters(Sorbitan Fatty Acid Esters)211 山梨醇(Sorbitol)212 大豆油(Soybean Oil)213 淀粉(Starch)214 预胶化淀粉(Starch,Pregelatinized)215 灭菌玉米淀粉(Starch,Sterilizable Maize)216 硬脂酸(Stearic Acid)217 硬脂醇(Stearyl Alcohol)218 羟糖氯(Sucralose)219 蔗糖(Sucrose)220 可压蔗糖(Sugar,Compressible)221 蔗糖粉(Sugar,Confectioner’s)222 蔗糖球形颗粒(Sugar Spheres)223 硫酸(Sulfuric Acid)224 葵花籽油(Sunflower Oil)225 氢化植物油（硬脂）栓剂基质(Sup-pository Bases,Hard Fat) 226 滑石粉(Talc)227 酒石酸(Tartaric Acid)228 四氟乙烷(HFC)(Tetrafluoroe-thane)229 硫柳汞(Thimerosal)230 二氧化钛(Titanium Dioxide)231 西黄蓍胶(Tragacanth)232 海藻糖(Trehalose)233 三醋汀(Triacetin)234 枸橼酸三丁酯(Tributyl Citrate)235 三乙醇胺(Triethanolamine)236 枸橼酸三乙酯(Triethyl Citrate)237 香草醛(Vanillin)238 氢化植物油(Vegetable Oil,Hydrogenated)239 水(Water)240 阴离子乳化蜡(Wax,Anionic Emulsifying)241 巴西棕榈蜡(Wax,Carnauba)242 十六醇酯蜡(Wax,Cetyl Esters)243 微晶蜡(Wax,Microcrystalline)244 非离子乳化蜡(聚西托醇乳化蜡)(Wax,Nonionic Emulsifying) 245 白蜡(Wax,White)246 黄蜡(Wax,Yellow)247 黄原酸胶(Xanthan Gum)248 木糖醇(Xylitol)796249 玉米朊（玉米蛋白）(Zein)250 硬脂酸锌(Zinc Stearate)。

中英文对照各种表面颜色码

102 SH PVD-Satin chrome
103 SL Satin chrome (clear lacquer)
SP Satin Black with Speckles 104 SS Stainless Steel 106 ST Satin chrome
STD Satin chrome 3 Plated
CSN
Chrome + white frosted glass
CWFG
33 CN Chrome + Brushed nickel
CBN
34 CO Copper plated finish
CU
35 CP Chrome
CPA
CPC
CPD Chrome 3 Plated 36 CQ Chrome + Bisque 37 CR Chrome + French Gold (PVD) 38 CS Chrome + Satin chrome
PNVP BL SB
SN
SNPV SBM BNVC
64 NB Brushed nickel(No lacquer)(代碼:015) BNW
65 NC Brushed nickel + chrome
BNC
66 ND PVD - Brushed nickel
BNV
67 NE PVD - Brushed nickel + polish brass PVD BVPV
107 SY Satin chrome + polish brass PVD
108 TG Antique brass + Gold 109 TN PVD - Ti
110 UG Brushed satin nickel + Gold

丙泊酚静脉麻醉用于门诊胃镜检查术

制。

酒石酸布托啡诺镇静、镇痛效果优于盐酸吗啡,常规量的枸橼芬太尼与盐酸曲马多镇痛效果较盐酸吗啡和酒石酸布托啡诺差,且盐酸曲马多恶心呕吐发生率和盐酸吗啡相同,甚至还要高,成为多数产科医生和产妇不愿接受的原因之一。

酒石酸布托啡诺属于混合型阿片受体激动-拮抗药,主要激动κ和δ受体,并拮抗μ受体,该药能有效地减轻中度及重度疼痛,镇痛效价约为盐酸吗啡的5～8倍,同时具有镇静作用,很少出现欣快及不愉快的感觉[1]。

通常认为,恶心呕吐、皮肤瘙痒是由于盐酸吗啡刺激μ受体而引起;μ受体兴奋可以导致胃肠排空时间延长,胃肠平滑肌张力增高,从而增加恶心呕吐的发生率。

而盐酸布托啡诺是吗啡喃的衍生物,具有镇痛效应强、镇痛时间久、胃肠道不良反应少、对呼吸抑制作用小、药物依赖性低等特点[2],是剖宫产术后连续硬膜外镇痛的较好的选择。

[参考文献][1]　王旭.一种新型镇痛药———布托啡诺的研究进展[J].中国药师,2006,11(9):1044-1045[2]　刘俊杰,赵俊.现代麻醉学[M].2版.北京:人民卫生出版社,1997:322[收稿日期]　2009-07-01丙泊酚静脉麻醉用于门诊胃镜检查术叶学文,贺　玲,沈晓燕(宁夏青铜峡市医院,宁夏青铜峡751600)[关键词]　丙泊酚;麻醉;胃镜检查[中图分类号]　R0614.24 [文献标识码]　B [文章编号]　1008-8849(2010)02-0230-02 胃镜检查术是临床常用的诊断性操作,但咽喉部刺激会给患者带来极大的痛苦。

丙泊酚全凭静脉麻醉是近年来国内正在开展的日间手术的麻醉方法。

笔者对照观察了丙泊酚全麻下胃镜检查和清醒胃镜检查的效果,现报道如下。

1　临床资料111　一般资料　A组120例为自愿行丙泊酚全麻接受胃镜检查患者,年龄(58.03±6.09)岁,体质量(61.72±5.82)kg,检查用时(11.47±7.48)min;高血压20例,10例ECG检查有ST段的改变,3例有室性早搏。

PMV65XP,215;中文规格书,Datasheet资料

-
−10 −100 nA
-
65
76
mΩ
-
104 122
mΩ
-
90
112
mΩ
-
7.6
-
nC
-
1.6
-
nC
-
0.65 -
nC
-
−1.5 -
V
-
725 -
pF
-
105 -
pF
-
80
-
pF
-
7
-
ns
-
21
-
ns
-
68
-
ns
-
33
-
ns
-
−0.77 −1.2 V
9397 750 13993
Product data sheet
Rev. 01 — 28 September 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
2 of 12
Philips Semiconductors
PMV65XP
P-channel TrenchMOS™ extremely low level FET
25 °C ≤ Tj ≤ 150 °C 25 °C ≤ Tj ≤ 150 °C; RGS = 20 kΩ
VGS
gate-source voltage (DC)
ID
drain current (DC)
IDM
peak drain current
Ptot
total power dissipation
Tsp = 25 °C; VGS = −4.5 V; Figure 2 and 3 Tsp = 100 °C; VGS = −4.5 V; Figure 2 Tsp = 25 °C; pulsed; tp ≤ 10 µs; Figure 3 Tsp = 25 °C; Figure 1

三菱PLC指令详解资料

一顺控指令1触点指令00 LD逻辑操作开始01 LDI逻辑非操作开始02 AND逻辑乘03 ANI逻辑乘非04 OR逻辑加05 ORI逻辑加非2连接指令06 ANB AND逻辑块与07 ORB OR逻辑块或08 MPS储藏操作结果09 MRD从MPS读取操作结果10 MPP从MPS读取操作结果并除去结果3输出指令11 OUT软元件输出12 SET软元件置位13 RST软元件复位14 PLS在输入信号的上升沿15 PLF在输入信号的下降沿16 CHK软元件输出翻转4移位指令17 SFT元件移1位18 SFTP元件移1位5主控指令19 MC主控开始20 MCR主控复位6结束指令21 FEND结束主程序22 END总的程序尾端，返回第 0步7其他指令23 STOP停止24 NOP空操作二基本指令1比较指令16位数据比较25 LD=当S1=S2,接通，当 S1≠S2, 断开26AND=27OR=28LD<> 当 S1≠S2, 接通，当S1=S2, 断开29AND<>30OR<>31LD> 当 S1>S2, 接通，当S1≤S2, 断开32AND>33OR>34LD<= 当 S1≤S2, 接通，当S1>S2, 断开35AND<=36OR<=37LD< 当 S1<S2, 接通，当S1≥S2, 断开38AND<39OR<40LD>= 当 S1≥S2, 接通，当S1<S2, 断开41AND>=42OR>=32位数据比较43 LDD=当(S1+1,S1)=(S2+1,S2),接通44ANDD=45ORD=46 LDD<>当(S1+1,S1)≠(S2+1,S2),接通47ANDD<>48ORD<>49LDD> 当(S1+1,S1)>(S2+1,S2), 接通50ANDD>51ORD>52LDD<= 当 (S1+1,S1) ≤(S2+1,S2), 接通53ANDD<=54ORD<=55LDD< 当(S1+1,S1)<(S2+1,S2), 接通56ANDD<57ORD<58LDD>= 当 (S1+1,S1) ≥(S2+1,S2), 接通59ANDD>=60ORD>=2算术运算指令二进制 16 位加/减61 + (D)+(S)→ (D)62+P63+ (S1)+(S2) →(D)64+P65- (D)-(S) → (D)66-P67- (S1)-(S2) →(D)68-P二进制 32 位加/减69 D+ (D+1,D)+(S+1,S)→ (D+1,D) 70D+P71D+ (S1+1,S1)+(S2+1,S2)→(D+1,D) 72D+P73 D- (D+1,D)-(S+1,S)→ (D+1,D)74D-P75D- (S1+1,S1)-(S2+1,S2) →(D+1,D) 76D-P77* (S1) ×(S2) →(D+1,D)78*P79/ (S1)/(S2) →商 (D), 余数 (D+1)80/P81D* (S1+1,S1) ×(S2+1,S2) →(D+3,D+2,D+1,D)82D*P83D/ (S1+1,S1)/(S2+1,S2) →商(D+1,D), 余数 (D+3,D+2)84D/P85 B+ (D)+(S)→(D)86B+P87B+ (S1)+(S2) →(D)88B+P89B- (D)-(S) →(D)90B-P91B- (S1)-(S2) →(D)92B-P93 DB+ (D+1,D)+(S+1,S)→(D+1,D) 94DB+P95DB+ (S1+1,S1)+(S2+1,S2)→(D+1,D) 96DB+P97DB- (D+1,D)-(S+1,S) →(D+1,D)98DB-P99DB- (S1+1,S1)-(S2+1,S2) →(D+1,D) 100DB-P101B* (S1) ×(S2) →(D+1,D)102B*P103B/ (S1)/(S2) →商 (D), 余数 (D+1) 104B/P105DB* (S1+1,S1) ×(S2+1,S2) →(D+3,D+2,D+1,D)106DB*P107DB/ (S1+1,S1)/(S2+1,S2) →商(D+1,D), 余数 (D+3,D+2)108DB/P109INC (D)+1 → (D)110INCP111 DINC (D+1,D)+1→(D+1,D) 112DINCP113DEC (D)-1 →(D)114DECP115 DDEC (D+1,D)-1→(D+1,D) 116 DDECP3 BCD —二进制变换117 BCD (S) → (D)BCD 变换118BCDP119DBCD (S+1,S) →(D+1,D) 120DBCDP121BIN (S) →(D) 二进制变换122BINP123DBIN (S+1,S) →(D+1,D)124DBINP4数据传达指令125 MOV (S)→(D)126MOVP127DMOV (S+1,S) → (D+1,D)128DMOVP129CML (S) →(D)130CMLP131DCML (S+1,S) → (D+1,D)132DCML133DCMLP134BMOV (S) →(D)n 个135BMOVP136FMOV (S) →(D)n 个137FMOVP138XCH (D1) ←→ (D2)139XCHP140 DXCH (D1+1,D1)←→ (D2+1,D2) 141 DXCHP5程序分支指令142 CJ条件满足，跳转到P** 处143 SCJ条件满足后紧接的扫描周期,跳转到 P** 处144 JMP无条件跳转到P** 处145 CALL执行P**处子程序146CALLP147RET 从子程序返回148EI 赞同中断149DI 禁止中断150IRET 从中断程序返回151SUB 执行 n 指定的程序152SUBP6程序切换指令153 CHG在主副程序间切换7刷新指令154 COM执行通讯刷新155 EI赞同通讯刷新156 DI禁止通讯刷新157 SEG对应软元件的刷新，仅执行1个扫描周期，M9052 ON时有效三应用指令1逻辑运算指令158 WAND (D) AND (S)→ (D)159 WANDP160 WAND (S1) AND (S2)→(D)161 WANDP162 DAND (D+1,D) AND (S+1,S)→(D+1,D) 163 DANDP164 WOR (D) OR (S)→(D)165 WORP166 WOR (S1) OR (S2)→(D)167 WORP168 DOR (D+1,D) OR (S+1,S)→ (D+1,D) 169 DORP170 WXOR (D) XOR (S)→(D) 异或171 WXORP172 WXOR (S1) XOR (S2)→(D)173 WXORP174 DXOR (D+1,D) XOR (S+1,S)→(D+1,D) 175 DXORP176 WXNR (D) XOR (S)→(D)177 WXNRP178 WXNR (S1) XOR (S2)→(D)179 WXNRP180 DXNR (D+1,D) XOR (S+1,S)→(D+1,D) 181DXNRP182NEG 0-(D) →(D) 补码183NEGP2旋转指令184 ROR n位右转185RORP186RCR n 位右转 (带进位 ) 187RCRP188ROL n 位左转189ROLP190RCL n 位左转 (带进位 ) 191RCLP192DROR n 位右转193DRORP194DRCR n 位右转 (带进位 ) 195DRCRP196DROL n 位左转197DROLP198DRCL n 位左转 (带进位 ) 199DRCLP3移位指令200 SFR n 位右移201SFRP202SFL n 位左移203SFLP204 BSFR 1 位右移205BSFRP206BSFL 1 位左移207BSFLP208DSFR 1 位右移209DSFRP210DSFL 1 位左移211DSFLP4数据办理指令212 SER数据找寻213SERP214SUM 位检查215SUMP216DSUM217DSUMP218DECO 译码编码219DECOP220ENCO221ENCOP222SEG 7 段编码223BSET 对字中 n 地址位224BSETP225 BRST对字中n位复位226BRSTP227DIS 组合分别228DISP229UNI230UNIP231ASC ASCII 转变5先进先出指令232 FIFW FIFO写233FIFWP234FIFR FIFO 读235FIFRP6内存缓冲区存取指令236 FROM从特别功能模块读取数据237FROMP238DFRO239DFROP240TO 向特别功能模块写数据241TOP242DTO243FROM 从远程 I/O 站读数据244FROMP245DFRO246DFROP247TO 向远程站写数据248TOP249DTO250DTOP7 FOR/NEXT指令251 FOR重复n次252 NEXT8 当地站、远程I/O 站存取指令253 LRDP从当地站读数据254 LWTP向当地站写数据255 RFRP从远程特别功能模块读数据256 RTOP向远程特别功能模块写数据9显示指令257 PR从指定的8点字软元件输出16 个字符的 ASCII 码258 PR序次向输出模块输出ASCII 码 , 直到结束符 NUL(00H)259 PRC将字软元件的说明变换成ASCII 码，并输出260 LED将指定的8点字软元件显示16 个字符的 ASCII 码261 LEDA显示指定的英文数字字符262LEDB263LEDC 显示软元件 S 的说明264LEDR 显示复位10其他指令265 WDT WDT复位266WDTP267CHK 故障检测268SLT 按参数设定的条件 ,数据被锁定269SLTR 状态锁存复位，且执行 SLT 270STRA 按参数设定的条件 ,采样数据存入271STRAR 采样追踪复位，且赞同执行272STC 进位标志 (M9012)ON273CLC 进位标志 (M9012)OFF274DUTY 用户定义时钟11伺服指令275 DSFRP央求启动伺服程序276 PSFLP数据更正特别继电器和特别存放器一特别继电器M 清单M9000熔丝断M9002 I/O组件校验出错M9004 MINI网通讯出错M9005 AC电源掉电检测M9006电池电压低M9007电池电压低锁存M9008自诊断出错M9009信号报警器检测M9010运算出错标志M9011运算出错标志锁存M9012进位标志M9016数据储藏区清零标志M9017数据储藏区清零标志M9018数据通讯监控切换M9020 0号用户准时时钟M9021 1号用户准时时钟M9022 2号用户准时时钟M9023 3号用户准时时钟M9024 4号用户准时时钟M9025时钟数据设置央求M9026时钟数据出错M9027时钟数据显示M9028时钟数据读央求秒时钟秒时钟M9032 1秒时钟M9033 2秒时钟M9034 1分钟时钟M9036常开M9037常闭M9038 RUN后第一个扫描周期ON M9039运行标志M9040 暂停 PAUSE 赞同线圈M9041 PAUSE状态触点M9042停止状态触点M9043采样追踪完成M9044采样追踪M9046采样追踪M9047采样追踪准备M9048 RUN LED闪烁标志M9049切换输出字符数量M9050存放操作结果的储藏区交换触点M9051 CHG指令执行禁止M9052 SEG指令切换M9053 EI/DI指令切换M9054单步运行标志M9055状态锁存完成标志M9056 主程序 P, I 设置央求M9057 副程序 P, I 设置程序M9060 副程序 2P, I 设置程序M9061 副程序 3P, I 设置程序M9060远程终端出错M9061通讯出错M9065分别传达状态M9066传达办理切换M9067 I/O组件出错检测M9068测试模式M9069线路故障时的输出M9073 WDT出错标志M9074 PCPU准备完成标志M9075测试模式标志M9076外面急停输入标志M9077手动脉冲发生器轴设置错误标志M9078测试模式央求出错标志M9079伺复程序设置出错标志M9081对远程模块的通讯央求M9082最后站数不一致M9084出错检测M9086运行标志 BASIC 程序M9087暂停 (PAUSE) 标志M9091操作运行出错细节标志M9091微机子程序调用出错标志M9092双电源模块过热M9093双工电源模块出错M9094I/O改变标志M9095双工运行校验出错M9096A3VCPU A自校出错M9097A3VCPU B自校出错M9098A3VCPU C自校出错M9099A3VTU 自校出错M9100SFC程序登记M9101SFC程序起 /停M9102SFC启动状态M9103连续步转移有效 / 无效M9104连续转移防范标志M9108步转移监控准时器初步( 对应 D9108)M9109步转移监控准时器初步( 对应 D9109)M9110步转移监控准时器初步( 对应 D9110)M9111步转移监控准时器初步( 对应 D9111)M9112步转移监控准时器初步( 对应 D9112)M9113步转移监控准时器初步( 对应 D9113)M9114步转移监控准时器初步( 对应 D9114)M9180激活步采样追踪完成标志M9181激活步采样追踪执行标志M9182激活步采样追踪有效M9196在块停止时控制输出M9197~9198保险丝熔断，I/O校核出错显示切换二特别存放器D9000保险丝断D9001保险丝断D9002 I/O组件校验出错D9003 SUM指令检测位数D9004 MINI网主通讯组件出错D9005 AC掉电计数D9006电池不足D9008自诊断出错D9009信号报警器检测D9010出错步D9011出错步D9014 I/O控制模式D9015 CPU运行状态D9016 ROM/RAM设置D9017最小扫描时间D9018当前扫描时间D9019最大扫描时间D9020恒定扫描D9021扫描时间D9022 1秒计数器D9025 时钟数据 (年，月 )D9026 时钟数据 (日，时 )D9027 时钟数据 (分，秒 )D9028 时钟数据 (星期 )D9021~D9034远程终端组件参数设置D9035 远程 I/O 组件的通讯属性D9035扩展文件存放器D9036总的站数D9036~9037供指定扩展文件存放器软件地址D9038~9039 LED显示优先级D9044采样追踪D9050 SFC程序出错代码D9051出错块D9052出错步D9053转移出错D9054出错顺控步D9055状态锁存步序号D9061通讯出错代码D9072 PC通讯检测D9081对远程终端模块的已执行的通讯央求数D9082最后的站号D9090微机子程序输入数据区首软元件号D9091指令出错D9094 待更换的 I/O 组件的首地址D9095 A3VTS系统和A3VCPU的运行状态D9096 A3VCPU A自检出错D9097A3VCPU B自检出错D9098A3VCPU C自检出错D9099A3VTU 自检测出错D9100~D9107断保险丝的组件D9100保险丝熔断的组件D9108~D9114步转移监控准时器设置D9116~D9123 I/O组件校验出错D9124信号器报警数量检测D9125~D9132信号报警器地址号D9133~D9140远程终端卡信息D9141~D9172通讯重发次数D9173模式设置D9174设置重发次数D9175线缆出错模块出错代码D9180~9193远程终端模块出错代码D9180 轴 1 和轴 2 的限位开关输出状态储藏区D9181 轴 3 和轴 4 的限位开关输出状态储藏区D9182 轴 5 和轴 6 的限位开关输出状态储藏区D9183 轴 7 和轴 8 的限位开关输出状态储藏区D9184 CPU出错的原因D9185伺服放大器接线数据D9187手动脉冲发生器轴设置出错D9188在TEST模式下启动轴号央求出错D9189出错程序号D9190数据设置出错D9191伺服放大器种类D9196~9199故障站检测D9200LRDP办理结果D9201LWTP办理结果D9204通讯状态D9205执行回送的站D9206执行回送的站D9207通讯扫描时间 (最大值 )D9208通讯扫描时间 (最小值 )D9209通讯扫描时间 (当前值 )D9210重发次数D9211环路切换计数D9212就地站运行状态 (1~16)D9213就地站运行状态 (17~32)D9214就地站运行状态 (33~48)D9215 就地站运行状态 (49~64)D9216 就地站出错检测 (1~16)D9217 就地站出错检测 (17~32)D9218 就地站出错检测 (33~48)D9219 就地站出错检测 (49~64)D9220 就地站参数不般配或(1~16)远程站 I/O 分配出错D9221 就地站参数不般配或(17~32)远程站 I/O 分配出错D9222 就地站参数不般配或(33~48)远程站 I/O 分配出错D9223 就地站参数不般配或(49~64)远程站 I/O 分配出错D9224 主站与从站和远程I/O 站之间的初始通讯 (1~16)D9225 主站与从站和远程I/O 站之间的初始通讯 (17~32)D9226 主站与从站和远程I/O 站之间的初始通讯 (33~48)D9227 主站与从站和远程I/O 站之间的初始通讯 (49~64)D9228 就地站或远程I/O 站出错 (1~16)D9229就地站或远程 I/O 站出错 (17~32) D9230就地站或远程 I/O 站出错 (33~48) D9231就地站或远程 I/O 站出错 (49~64) D9232就地站或远程 I/O 站环路出错D9233就地站或远程 I/O 站环路出错D9234就地站或远程 I/O 站环路出错D9235就地站或远程 I/O 站环路出错D9236就地站或远程 I/O 站环路出错D9237就地站或远程 I/O 站环路出错D9238就地站或远程 I/O 站环路出错D9239就地站或远程 I/O 站环路出错D9240检测到接收出错的次数D9243本站站号检测D9244从站的总数D9245检测到的接收出错次数D9248就地站运行状态D9249就地站运行状态D9250就地站运行状态D9251就地站运行状态D9252就地站出错检测D9253就地站出错检测D9254就地站出错检测D9255就地站出错检测各种软元件一览表项目 A1,A1NA1S A2,A2NA2C A2-S1A2N-S1 A3,A3NA3A A 2U,A3UA4UI/O 软元件点 256 512 1024 2048 8192输入继电器 X 0~FF 0~1FF 0~3FF 0~7FF 0~FFF输出继电器 Y 0~FF 0~1FF 0~3FF 0~7FF 0~FFF辅助继电器内部继电器(1000点)M0~M999 M0~M999, M2 048~8191特别继电器(256 点 )M9000~M9255锁存继电器(1048 点 )L1000~L2048通讯用继电器(2048 点)B0~B3FF B0~BFFF准时器 100ms准时器(200点)T0~T19910ms 准时器 (56 点)T200~T255100ms记忆准时器(0 点 )计数器 (256 点)C0~C255存放器数据存放器 (1024 点)D0~D1023 D0~D6143特别存放器(256 点 )D9000~D9255通讯存放器(1024 点 )W0~W3FF W0~WFFF累加器 (2 点)A0,A1变址存放器 (2 点 )Z, V Z,Z1~Z6(7点), V,V1~V6(7点)嵌套 (8 点 )N0~ N7指针 (256 点)P0~P255中断指针 (32 点)I0~I31常数十进制K (16 位)-32768~+32767(32 位 )-2147483648 ~+2147483647十六进制 H (16 位 )0~FFFF(32 位 )0~FFFFFFFF。

R5F21245SNFP资料

R8C/24 Group, R8C/25 GroupSINGLE-CHIP 16-BIT CMOS MCU1.OverviewThese MCUs are fabricated using a high-performance silicon gate CMOS process, embedding the R8C/Tiny Series CPU core, and are packaged in a 52-pin molded-plastic LQFP or a 64-pin molded-plastic FLGA. It implements sophisticated instructions for a high level of instruction efficiency. With 1 Mbyte of address space, they are capable of executing instructions at high speed.Furthermore, the R8C/25 Group has on-chip data flash (1 KB x 2 blocks).The difference between the R8C/24 Group and R8C/25 Group is only the presence or absence of data flash. Their peripheral functions are the same.1.1ApplicationsElectronic household appliances, office equipment, audio equipment, consumer products, etc.REJ03B0117-0300Rev.3.00Feb 29, 20081.2Performance OverviewTable 1.1 outlines the Functions and Specifications for R8C/24 Group and Table 1.2 outlines the Functions and Specifications for R8C/25 Group.NOTES:1.I 2C bus is a trademark of Koninklijke Philips Electronics N. V.2.Specify the D version if D version functions are to be used.Table 1.1Functions and Specifications for R8C/24 GroupItem SpecificationCPU Number of fundamental instructions89 instructionsMinimum instruction execution time 50 ns (f(XIN) = 20 MHz, VCC = 3.0 to 5.5 V)100 ns (f(XIN) = 10 MHz, VCC = 2.7 to 5.5 V)200 ns (f(XIN) = 5 MHz, VCC = 2.2 to 5.5 V)Operating mode Single-chip Address space 1 Mbyte Memory capacity Refer to Table 1.3 Product Information for R8C/24 GroupPeripheral Functions Ports I/O ports: 41 pins, Input port: 3 pins LED drive ports I/O ports: 8 pinsTimers Timer RA: 8 bits × 1 channelTimer RB: 8 bits × 1 channel(Each timer equipped with 8-bit prescaler)Timer RD: 16 bits × 2 channels(Input capture and output compare circuits)Timer RE: With real-time clock and compare match functionSerial interfaces 2 channels (UART0, UART1)Clock synchronous serial I/O, UARTClock synchronous serial interface 1 channel I 2C bus Interface (1)Clock synchronous serial I/O with chip selectLIN module Hardware LIN: 1 channel (timer RA, UART0)A/D converter 10-bit A/D converter: 1 circuit, 12 channels Watchdog timer 15 bits × 1 channel (with prescaler)Reset start selectableInterrupts Internal: 11 sources, External: 5 sources, Software: 4sources, Priority levels: 7 levelsClock Clock generation circuits 3 circuits•XIN clock generation circuit (with on-chip feedback resistor)•On-chip oscillator (high speed, low speed)High-speed on-chip oscillator has a frequency adjustment function•XCIN clock generation circuit (32 kHz)Real-time clock (timer RE)Oscillation stop detection function XIN clock oscillation stop detection function Voltage detection circuit On-chip Power-on reset circuit On-chipElectrical Characteristics Supply voltage VCC = 3.0 to 5.5 V (f(XIN) = 20 MHz)VCC = 2.7 to 5.5 V (f(XIN) = 10 MHz)VCC = 2.2 to 5.5 V (f(XIN) = 5 MHz)Current consumption Typ. 10 mA (VCC = 5.0 V, f(XIN) = 20 MHz)Typ. 6 mA (VCC = 3.0 V, f(XIN) = 10 MHz)Typ. 2.0 µA (VCC = 3.0 V, wait mode (f(XCIN) = 32 kHz)Typ. 0.7 µA (VCC = 3.0 V, stop mode)Flash Memory Programming and erasure voltage VCC = 2.7 to 5.5 VProgramming and erasure endurance 100 timesOperating Ambient Temperature -20 to 85°C (N version)-40 to 85°C (D version)(2)-20 to 105°C (Y version)(3)Package 52-pin molded-plastic LQFP64-pin molded-plastic FLGATable 1.2Functions and Specifications for R8C/25 GroupNOTES:1.I 2C bus is a trademark of Koninklijke Philips Electronics N. V.2.Specify the D version if D version functions are to be used.Item SpecificationCPU Number of fundamental instructions89 instructionsMinimum instruction execution time 50 ns (f(XIN) = 20 MHz, VCC = 3.0 to 5.5 V)100 ns (f(XIN) = 10 MHz, VCC = 2.7 to 5.5 V)200 ns (f(XIN) = 5 MHz, VCC = 2.2 to 5.5 V)Operating mode Single-chip Address space 1 Mbyte Memory capacity Refer to Table 1.4 Product Information for R8C/25 GroupPeripheral Functions Ports I/O ports: 41 pins, Input port: 3 pins LED drive ports I/O ports: 8 pinsTimers Timer RA: 8 bits × 1 channelTimer RB: 8 bits × 1 channel(Each timer equipped with 8-bit prescaler)Timer RD: 16 bits × 2 channels(Input capture and output compare circuits)Timer RE: With real-time clock and compare match functionSerial interface 2 channels (UART0, UART1)Clock synchronous serial I/O, UARTClock synchronous serial interface 1 channel I 2C bus Interface (1)Clock synchronous serial I/O with chip selectLIN module Hardware LIN: 1 channel (timer RA, UART0)A/D converter 10-bit A/D converter: 1 circuit, 12 channels Watchdog timer 15 bits × 1 channel (with prescaler)Reset start selectableInterrupts Internal: 11 sources, External: 5 sources, Software: 4sources, Priority levels: 7 levelsClock Clock generation circuits 3 circuits•XIN clock generation circuit (with on-chip feedbackresistor)•On-chip oscillator (high speed, low speed)High-speed on-chip oscillator has a frequency adjustment function•XCIN clock generation circuit (32 kHz)Real-time clock (timer RE)Oscillation stop detection function XIN clock oscillation stop detection function Voltage detection circuit On-chip Power-on reset circuit On-chipElectrical Characteristics Supply voltage VCC = 3.0 to 5.5 V (f(XIN) = 20 MHz)VCC = 2.7 to 5.5 V (f(XIN) = 10 MHz)VCC = 2.2 to 5.5 V (f(XIN) = 5 MHz)Current consumption Typ. 10 mA (VCC = 5.0 V, f(XIN) = 20 MHz)Typ. 6 mA (VCC = 3.0 V, f(XIN) = 10 MHz)Typ. 2.0 µA (VCC = 3.0 V, wait mode (f(XCIN) = 32 kHz)Typ. 0.7 µA (VCC = 3.0 V, stop mode)Flash memory Programming and erasure voltage VCC = 2.7 to 5.5 VProgramming and erasure endurance 1,0000 times (data flash)1,000 times (program ROM)Operating Ambient Temperature -20 to 85°C (N version)-40 to 85°C (D version)(2)-20 to 105°C (Y version)(3)Package 52-pin molded-plastic LQFP64-pin molded-plastic FLGA1.3Block DiagramFigure 1.1 shows a Block Diagram.1.4Product InformationTable 1.3 lists the Product Information for R8C/24 Group and Table 1.4 lists the Product Information for R8C/25Group.NOTE:1.The user ROM is programmed before shipment.Table 1.3Product Information for R8C/24 GroupCurrent of Feb. 2008 Type No.ROM Capacity RAM Capacity Package Type Remarks R5F21244SNFP 16 Kbytes 1 Kbyte PLQP0052JA-A N version Blank productR5F21245SNFP 24 Kbytes 2 Kbytes PLQP0052JA-A R5F21246SNFP 32 Kbytes 2 Kbytes PLQP0052JA-A R5F21247SNFP 48 Kbytes 2.5 Kbytes PLQP0052JA-A R5F21248SNFP 64 Kbytes 3 Kbytes PLQP0052JA-A R5F21244SNLG 16 Kbytes 1 Kbyte PTLG0064JA-A R5F21246SNLG 32 Kbytes 2 Kbytes PTLG0064JA-A R5F21244SDFP 16 Kbytes 1 Kbyte PLQP0052JA-A D version Blank productR5F21245SDFP 24 Kbytes 2 Kbytes PLQP0052JA-A R5F21246SDFP 32 Kbytes 2 Kbytes PLQP0052JA-A R5F21247SDFP 48 Kbytes 2.5 Kbytes PLQP0052JA-A R5F21248SDFP64 Kbytes 3 Kbytes PLQP0052JA-A R5F21244SNXXXFP 16 Kbytes 1 Kbyte PLQP0052JA-A N version Factoryprogramming product (1)R5F21245SNXXXFP 24 Kbytes 2 Kbytes PLQP0052JA-A R5F21246SNXXXFP 32 Kbytes 2 Kbytes PLQP0052JA-A R5F21247SNXXXFP 48 Kbytes 2.5 Kbytes PLQP0052JA-A R5F21248SNXXXFP 64 Kbytes 3 Kbytes PLQP0052JA-A R5F21244SNXXXLG 16 Kbytes 1 Kbyte PTLG0064JA-A R5F21246SNXXXLG 32 Kbytes 2 Kbytes PTLG0064JA-A R5F21244SDXXXFP 16 Kbytes 1 Kbyte PLQP0052JA-A D version Factoryprogramming product (1)R5F21245SDXXXFP 24 Kbytes 2 Kbytes PLQP0052JA-A R5F21246SDXXXFP 32 Kbytes 2 Kbytes PLQP0052JA-A R5F21247SDXXXFP 48 Kbytes 2.5 Kbytes PLQP0052JA-A R5F21248SDXXXFP64 Kbytes3 KbytesPLQP0052JA-ANOTE:1.The user ROM is programmed before shipment.Table 1.4Product Information for R8C/25 GroupCurrent of Feb. 2008Type No.ROM CapacityRAMCapacity Package Type Remarks Program ROM Data flash R5F21254SNFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0052JA-A N version Blank productR5F21255SNFP 24 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21256SNFP 32 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21257SNFP 48 Kbytes 1 Kbyte × 2 2.5 Kbytes PLQP0052JA-A R5F21258SNFP 64 Kbytes 1 Kbyte × 2 3 Kbytes PLQP0052JA-A R5F21254SNLG 16 Kbytes 1 Kbyte × 2 1 Kbyte PTLG0064JA-A R5F21256SNLG 32 Kbytes 1 Kbyte × 2 2 Kbytes PTLG0064JA-A R5F21254SDFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0052JA-A D version Blank productR5F21255SDFP 24 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21256SDFP 32 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21257SDFP 48 Kbytes 1 Kbyte × 2 2.5 Kbytes PLQP0052JA-A R5F21258SDFP64 Kbytes 1 Kbyte × 2 3 Kbytes PLQP0052JA-A R5F21254SNXXXFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0052JA-A N version Factoryprogramming product (1)R5F21255SNXXXFP 24 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21256SNXXXFP 32 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21257SNXXXFP 48 Kbytes 1 Kbyte × 2 2.5 Kbytes PLQP0052JA-A R5F21258SNXXXFP 64 Kbytes 1 Kbyte × 2 3 Kbytes PLQP0052JA-A R5F21254SNXXXLG 16 Kbytes 1 Kbyte × 2 1 Kbyte PTLG0064JA-A R5F21256SNXXXLG 32 Kbytes 1 Kbyte × 2 2 Kbytes PTLG0064JA-A R5F21254SDXXXFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0052JA-A D version Factoryprogramming product (1)R5F21255SDXXXFP 24 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21256SDXXXFP 32 Kbytes 1 Kbyte × 2 2 Kbytes PLQP0052JA-A R5F21257SDXXXFP 48 Kbytes 1 Kbyte × 2 2.5 Kbytes PLQP0052JA-A R5F21258SDXXXFP64 Kbytes 1 Kbyte × 23 KbytesPLQP0052JA-A1.5Pin AssignmentsFigure 1.4 shows PLQP0052JA-A Package Pin Assignments (Top View). Figure 1.5 shows PTLG0064JA-A Package Pin Assignments.1.6Pin FunctionsTable 1.5 lists Pin Functions.I: InputO: OutputI/O: Input and outputTable 1.5Pin FunctionsTypeSymbolI/O TypeDescriptionPower supply input VCC, VSS I Apply 2.2 V to 5.5 V to the VCC pin. Apply 0 V to the VSS pin.Analog power supply input AVCC, AVSS I Power supply for the A/D converter.Connect a capacitor between AVCC and AVSS.Reset input RESET I Input “L” on this pin resets the MCU.MODE MODE I Connect this pin to VCC via a resistor.XIN clock input XIN I These pins are provided for XIN clock generation circuit I/O.Connect a ceramic resonator or a crystal oscillator between the XIN and XOUT pins. To use an external clock, input it to the XIN pin and leave the XOUT pin open.XIN clock output XOUT O XCIN clock input XCIN I These pins are provided for XCIN clock generation circuit I/O.Connect a crystal oscillator between the XCIN and XCOUT pins. To use an external clock, input it to the XCIN pin and leave the XCOUT pin open.XCIN clock output XCOUT O INT interrupt input INT0 to INT3I INT interrupt input pins.INT0 is timer RD input pin. INT1 is timer RA input pin.Key input interrupt KI0 to KI3I Key input interrupt input pins Timer RA TRAIO I/O Timer RA I/O pin TRAO O Timer RA output pin Timer RB TRBOO Timer RB output pin Timer RDTRDIOA0, TRDIOA1,TRDIOB0, TRDIOB1,TRDIOC0, TRDIOC1,TRDIOD0, TRDIOD1I/OTimer RD I/O portsTRDCLK I External clock input pin Timer RE TREO O Divided clock output pin Serial interfaceCLK0, CLK1I/O Transfer clock I/O pin RXD0, RXD1I Serial data input pins TXD0, TXD1O Serial data output pins I 2C bus interfaceSCL I/O Clock I/O pin SDAI/O Data I/O pin Clock synchronous serial I/O with chip selectSSI I/O Data I/O pinSCS I/O Chip-select signal I/O pin SSCKI/O Clock I/O pin SSOI/O Data I/O pinReference voltage input VREF I Reference voltage input pin to A/D converter A/D converter AN0 to AN11I Analog input pins to A/D converterI/O portP0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0, P3_1,P3_3 to P3_5, P3_7, P4_3 to P4_5, P6_0 to P6_7I/OCMOS I/O ports. Each port has an I/O select direction register, allowing each pin in the port to be directed for input or output individually.Any port set to input can be set to use a pull-up resistor or not by a program.P2_0 to P2_7 also function as LED drive ports.Input port P4_2, P4_6, P4_7IInput-only portsNOTE:1.Can be assigned to the pin in parentheses by a program.Table 1.6Pin Name Information by Pin NumberPinNumber Control PinPortI/O Pin Functions for of Peripheral ModulesInterruptTimerSerial Interface ClockSynchronous Serial I/O with Chip Select I 2C busInterfaceA/D Converter2P3_5SSCK SCL 3P3_3SSI4P3_4SCSSDA5MODE 6XCIN P4_37XCOUT P4_48RESET 9XOUT P4_710VSS/AVSS11XIN P4_612VCC/AVCC13P2_7TRDIOD114P2_6TRDIOC115P2_5TRDIOB116P2_4TRDIOA117P2_3TRDIOD018P2_2TRDIOC019P2_1TRDIOB020P2_0TRDIOA0/TRDCLK21P1_7INT1TRAIO22P1_6CLK023P1_5(INT1)(1)(TRAIO)(1)RXD024P1_4TXD025P1_3KI3AN1127P4_5INT0INT028P6_6INT2TXD129P6_7INT3RXD130P1_2KI2AN1031P1_1KI1AN932P1_0KI0AN833P3_1TRBO 34P3_0TRAO35P6_5CLK136P6_437P6_338P0_7AN041P0_6AN142P0_5AN243P0_4AN344VREFP4_245P6_0TREO46P6_247P6_148P0_3AN449P0_2AN550P0_1AN651P0_0AN752P3_7SSO2.Central Processing Unit (CPU)Figure 2.1 shows the CPU Registers. The CPU contains 13 registers. R0, R1, R2, R3, A0, A1, and FB configure a register bank. There are two sets of register bank.2.1Data Registers (R0, R1, R2, and R3)R0 is a 16-bit register for transfer, arithmetic, and logic operations. The same applies to R1 to R3. R0 can be split into high-order bits (R0H) and low-order bits (R0L) to be used separately as 8-bit data registers. R1H and R1L are analogous to R0H and R0L. R2 can be combined with R0 and used as a 32-bit data register (R2R0). R3R1 is analogous to R2R0.2.2Address Registers (A0 and A1)A0 is a 16-bit register for address register indirect addressing and address register relative addressing. It is also used for transfer, arithmetic, and logic operations. A1 is analogous to A0. A1 can be combined with A0 and as a 32-bit address register (A1A0).2.3Frame Base Register (FB)FB is a 16-bit register for FB relative addressing.2.4Interrupt Table Register (INTB)INTB is a 20-bit register that indicates the start address of an interrupt vector table.2.5Program Counter (PC)PC is 20 bits wide and indicates the address of the next instruction to be executed.2.6User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)The stack pointers (SP), USP, and ISP, are each 16 bits wide. The U flag of FLG is used to switch betweenUSP and ISP.2.7Static Base Register (SB)SB is a 16-bit register for SB relative addressing.2.8Flag Register (FLG)FLG is an 11-bit register indicating the CPU state.2.8.1Carry Flag (C)The C flag retains carry, borrow, or shift-out bits that have been generated by the arithmetic and logic unit.2.8.2Debug Flag (D)The D flag is for debugging only. Set it to 0.2.8.3Zero Flag (Z)The Z flag is set to 1 when an arithmetic operation results in 0; otherwise to 0.2.8.4Sign Flag (S)The S flag is set to 1 when an arithmetic operation results in a negative value; otherwise to 0.2.8.5Register Bank Select Flag (B)Register bank 0 is selected when the B flag is 0. Register bank 1 is selected when this flag is set to 1.2.8.6Overflow Flag (O)The O flag is set to 1 when an operation results in an overflow; otherwise to 0.2.8.7Interrupt Enable Flag (I)The I flag enables maskable interrupts.Interrupt are disabled when the I flag is set to 0, and are enabled when the I flag is set to 1. The I flag is set to 0 when an interrupt request is acknowledged.2.8.8Stack Pointer Select Flag (U)ISP is selected when the U flag is set to 0; USP is selected when the U flag is set to 1.The U flag is set to 0 when a hardware interrupt request is acknowledged or the INT instruction of software interrupt numbers 0 to 31 is executed.2.8.9Processor Interrupt Priority Level (IPL)IPL is 3 bits wide and assigns processor interrupt priority levels from level 0 to level 7.If a requested interrupt has higher priority than IPL, the interrupt is enabled.2.8.10Reserved BitIf necessary, set to 0. When read, the content is undefined.3.Memory3.1R8C/24 GroupFigure 3.1 is a Memory Map of R8C/24 Group. The R8C/24 group has 1 Mbyte of address space from addresses 00000h to FFFFFh.The internal ROM is allocated lower addresses, beginning with address 0FFFFh. For example, a 48-Kbyte internal ROM area is allocated addresses 04000h to 0FFFFh.The fixed interrupt vector table is allocated addresses 0FFDCh to 0FFFFh. They store the starting address of each interrupt routine.The internal RAM is allocated higher addresses, beginning with address 00400h. For example, a 2-Kbyte internal RAM area is allocated addresses 00400h to 00BFFh. The internal RAM is used not only for storing data but also for calling subroutines and as stacks when interrupt requests are acknowledged.Special function registers (SFRs) are allocated addresses 00000h to 002FFh. The peripheral function control registers are allocated here. All addresses within the SFR, which have nothing allocated are reserved for future use and cannot be accessed by users.3.2R8C/25 GroupFigure 3.2 is a Memory Map of R8C/25 Group. The R8C/25 group has 1 Mbyte of address space from addresses 00000h to FFFFFh.The internal ROM (program ROM) is allocated lower addresses, beginning with address 0FFFFh. For example, a 48-Kbyte internal ROM area is allocated addresses 04000h to 0FFFFh.The fixed interrupt vector table is allocated addresses 0FFDCh to 0FFFFh. They store the starting address of each interrupt routine.The internal ROM (data flash) is allocated addresses 02400h to 02BFFh.The internal RAM area is allocated higher addresses, beginning with address 00400h. For example, a 2-Kbyte internal RAM is allocated addresses 00400h to 00BFFh. The internal RAM is used not only for storing data but also for calling subroutines and as stacks when interrupt requests are acknowledged.Special function registers (SFRs) are allocated addresses 00000h to 002FFh. The peripheral function control registers are allocated here. All addresses within the SFR, which have nothing allocated are reserved for future use and cannot be accessed by users.4.Special Function Registers (SFRs)An SFR (special function register) is a control register for a peripheral function. Tables 4.1 to 4.7 list the special function registers.Table 4.1SFR Information (1)(1)X: Undefined NOTES:1.The blank regions are reserved. Do not access locations in these regions.2.Software reset, watchdog timer reset, and voltage monitor 1 reset or voltage monitor 2 reset do not affect this register.3.The LVD0ON bit in the OFS register is set to 1 and hardware reset.4.Power-on reset, voltage monitor 0 reset or the LVD0ON bit in the OFS register is set to 0, and hardware reset.5.Software reset, watchdog timer reset, and voltage monitor 1 reset or voltage monitor 2 reset do not affect b2 and b3.6.The CSPROINI bit in the OFS register is set to 0.Address RegisterSymbolAfter reset0000h 0001h 0002h 0003h 0004h Processor Mode Register 0PM000h 0005h Processor Mode Register 1PM100h0006h System Clock Control Register 0CM001101000b 0007h System Clock Control Register 1CM100100000b0008h 0009h 000Ah Protect RegisterPRCR 00h 000Bh 000Ch Oscillation Stop Detection Register OCD 00000100b 000Dh Watchdog Timer Reset Register WDTR XXh 000Eh Watchdog Timer Start Register WDTS XXh000Fh Watchdog Timer Control Register WDC 00X11111b 0010h Address Match Interrupt Register 0RMAD000h 0011h 00h 0012h 00h 0013h Address Match Interrupt Enable Register AIER 00h 0014h Address Match Interrupt Register 1RMAD100h 0015h 00h 0016h 00h0017h 0018h 0019h 001Ah 001Bh 001Ch Count Source Protection Mode Register CSPR00h10000000b (6)001Dh 001Eh 001Fh 0020h 0021h 0022h 0023h High-Speed On-Chip Oscillator Control Register 0FRA000h0024h High-Speed On-Chip Oscillator Control Register 1FRA1When shipping 0025h High-Speed On-Chip Oscillator Control Register 2FRA200h0026h 0027h 0028h Clock Prescaler Reset FlagCPSRF 00h0029h High-Speed On-Chip Oscillator Control Register 4FRA4When shipping 002Ah 002Bh High-Speed On-Chip Oscillator Control Register 6FRA6When shipping 002Ch High-Speed On-Chip Oscillator Control Register 7FRA7When shipping0030h 0031h Voltage Detection Register 1(2)VCA100001000b 0032h Voltage Detection Register 2(2)VCA200h (3)00100000b (4)0033h 0034h 0035h 0036h Voltage Monitor 1 Circuit Control Register (5)VW1C 00001000b 0037h Voltage Monitor 2 Circuit Control Register (5)VW2C 00h0038h Voltage Monitor 0 Circuit Control Register (2)VW0C0000X000b (3)0100X001b (4)0039h 003Ah003Eh 003FhTable 4.2SFR Information (2)(1)Address Register Symbol After reset 0040h0041h0042h0043h0044h0045h0046h0047h0048h Timer RD0 Interrupt Control Register TRD0IC XXXXX000b 0049h Timer RD1 Interrupt Control Register TRD1IC XXXXX000b 004Ah Timer RE Interrupt Control Register TREIC XXXXX000b 004Bh004Ch004Dh Key Input Interrupt Control Register KUPIC XXXXX000b 004Eh A/D Conversion Interrupt Control Register ADIC XXXXX000b 004Fh SSU/IIC Interrupt Control Register(2)SSUIC / IICIC XXXXX000b 0050h0051h UART0 Transmit Interrupt Control Register S0TIC XXXXX000b 0052h UART0 Receive Interrupt Control Register S0RIC XXXXX000b 0053h UART1 Transmit Interrupt Control Register S1TIC XXXXX000b 0054h UART1 Receive Interrupt Control Register S1RIC XXXXX000b 0055h INT2 Interrupt Control Register INT2IC XX00X000b 0056h Timer RA Interrupt Control Register TRAIC XXXXX000b 0057h0058h Timer RB Interrupt Control Register TRBIC XXXXX000b 0059h INT1 Interrupt Control Register INT1IC XX00X000b 005Ah INT3 Interrupt Control Register INT3IC XX00X000b 005Bh005Ch005Dh INT0 Interrupt Control Register INT0IC XX00X000b 005Eh005Fh0060h0061h0062h0063h0064h0065h0066h0067h0068h0069h006Ah006Bh006Ch006Dh006Eh006Fh0070h0071h0072h0073h0074h0075h0076h0077h0078h0079h007Ah007Bh007Ch007Dh007Eh007FhX: UndefinedNOTES:1.The blank regions are reserved. Do not access locations in these regions.2.Selected by the IICSEL bit in the PMR register.Table 4.3SFR Information (3)(1)Address Register Symbol After reset 0080h0081h0082h0083h0084h0085h0086h0087h0088h0089h008Ah008Bh008Ch008Dh008Eh008Fh0090h0091h0092h0093h0094h0095h0096h0097h0098h0099h009Ah009Bh009Ch009Dh009Eh009Fh00A0h UART0 Transmit/Receive Mode Register U0MR00h00A1h UART0 Bit Rate Register U0BRG XXh00A2h UART0 Transmit Buffer Register U0TB XXh00A3h XXh00A4h UART0 Transmit/Receive Control Register 0U0C000001000b 00A5h UART0 Transmit/Receive Control Register 1U0C100000010b 00A6h UART0 Receive Buffer Register U0RB XXh00A7h XXh00A8h UART1 Transmit/Receive Mode Register U1MR00h00A9h UART1 Bit Rate Register U1BRG XXh00AAh UART1 Transmit Buffer Register U1TB XXh00ABh XXh00ACh UART1 Transmit/Receive Control Register 0U1C000001000b 00ADh UART1 Transmit/Receive Control Register 1U1C100000010b 00AEh UART1 Receive Buffer Register U1RB XXh00AFh XXh00B0h00B1h00B2h00B3h00B4h00B5h00B6h00B7h00B8h SS Control Register H / IIC bus Control Register 1(2)SSCRH / ICCR100h00B9h SS Control Register L / IIC bus Control Register 2(2)SSCRL / ICCR201111101b 00BAh SS Mode Register / IIC bus Mode Register(2)SSMR / ICMR00011000b 00BBh SS Enable Register / IIC bus Interrupt Enable Register(2)SSER / ICIER00h00BCh SS Status Register / IIC bus Status Register(2)SSSR / ICSR00h / 0000X000b 00BDh SS Mode Register 2 / Slave Address Register(2)SSMR2 / SAR00h00BEh SS Transmit Data Register / IIC bus Transmit Data Register(2)SSTDR / ICDRT FFh00BFh SS Receive Data Register / IIC bus Receive Data Register(2)SSRDR / ICDRR FFhX: UndefinedNOTES:1.The blank regions are reserved. Do not access locations in these regions.2.Selected by the IICSEL bit in the PMR register.Table 4.4SFR Information (4)(1)Address Register Symbol After reset 00C0h A/D Register AD XXh00C1h XXh00C2h00C3h00C4h00C5h00C6h00C7h00C8h00C9h00CAh00CBh00CCh00CDh00CEh00CFh00D0h00D1h00D2h00D3h00D4h A/D Control Register 2ADCON200h00D5h00D6h A/D Control Register 0ADCON000h00D7h A/D Control Register 1ADCON100h00D8h00D9h00DAh00DBh00DCh00DDh00DEh00DFh00E0h Port P0 Register P0XXh00E1h Port P1 Register P1XXh00E2h Port P0 Direction Register PD000h00E3h Port P1 Direction Register PD100h00E4h Port P2 Register P2XXh00E5h Port P3 Register P3XXh00E6h Port P2 Direction Register PD200h00E7h Port P3 Direction Register PD300h00E8h Port P4 Register P4XXh00E9h00EAh Port P4 Direction Register PD400h00EBh00ECh Port P6 Register P6XXh00EDh00EEh Port P6 Direction Register PD600h00EFh00F0h00F1h00F2h00F3h00F4h Port P2 Drive Capacity Control Register P2DRR00h00F5h UART1 Function Select Register U1SR XXh00F6h00F7h00F8h Port Mode Register PMR00h00F9h External Input Enable Register INTEN00h00FAh INT Input Filter Select Register INTF00h00FBh Key Input Enable Register KIEN00h00FCh Pull-Up Control Register 0PUR000h00FDh Pull-Up Control Register 1PUR1XX00XX00b 00FEh00FFhX: UndefinedNOTE:1.The blank regions are reserved. Do not access locations in these regions.Table 4.5SFR Information (5)(1)Address Register Symbol After reset 0100h Timer RA Control Register TRACR00h0101h Timer RA I/O Control Register TRAIOC00h0102h Timer RA Mode Register TRAMR00h0103h Timer RA Prescaler Register TRAPRE FFh0104h Timer RA Register TRA FFh0105h0106h LIN Control Register LINCR00h0107h LIN Status Register LINST00h0108h Timer RB Control Register TRBCR00h0109h Timer RB One-Shot Control Register TRBOCR00h010Ah Timer RB I/O Control Register TRBIOC00h010Bh Timer RB Mode Register TRBMR00h010Ch Timer RB Prescaler Register TRBPRE FFh010Dh Timer RB Secondary Register TRBSC FFh010Eh Timer RB Primary Register TRBPR FFh010Fh0110h0111h0112h0113h0114h0115h0116h0117h0118h Timer RE Second Data Register / Counter Data Register TRESEC00h0119h Timer RE Minute Data Register / Compare Data Register TREMIN00h011Ah Timer RE Hour Data Register TREHR00h011Bh Timer RE Day of Week Data Register TREWK00h011Ch Timer RE Control Register 1TRECR100h011Dh Timer RE Control Register 2TRECR200h011Eh Timer RE Count Source Select Register TRECSR00001000b 011Fh0120h0121h0122h0123h0124h0125h0126h0127h0128h0129h012Ah012Bh012Ch012Dh012Eh012Fh0130h0131h0132h0133h0134h0135h0136h0137h Timer RD Start Register TRDSTR11111100b 0138h Timer RD Mode Register TRDMR00001110b 0139h Timer RD PWM Mode Register TRDPMR10001000b 013Ah Timer RD Function Control Register TRDFCR10000000b 013Bh Timer RD Output Master Enable Register 1TRDOER1FFh013Ch Timer RD Output Master Enable Register 2TRDOER201111111b 013Dh Timer RD Output Control Register TRDOCR00h013Eh Timer RD Digital Filter Function Select Register 0TRDDF000h013Fh Timer RD Digital Filter Function Select Register 1TRDDF100hX: UndefinedNOTE:1.The blank regions are reserved. Do not access locations in these regions.。

变频器的类型下载[整理版]

/ybc7778/blog/item/6cd43b528c084e521038c2e3.html/ybc7778/blog/item/990b3358 33917ec43.html2010-09-25 17:131.台安(TIN)变频器说明书E2N2V2SV300N310S310EV3002.台达(DELT)变频器说明书VD-VD-B VD-VD-G VD-M VD-S VD-V3.英威腾(INVT)变频器说明书CHE CH CHV4.汇菱(HUILING)变频器说明书H30005.信捷(XINJE)变频器说明书V5/56.凯迪华能变频器说明书CD20007.酷马(QM)变频器说明书Q7000Q90009.三品(SNPIN)变频器说明书SKJ SPRQ-33310.能士(NS)变频器说明书NS20NS8011.台凌(TILING)变频器说明书TL80TL100TL100H12.力普变频器说明书LP10013.安普(MPLE)变频器说明书MP100014.誉强(YUQING)变频器说明书YQ3000-M YQ3000-YQ3000-G15.格立特(GRET)变频器说明书V10V11V1516.RICH(利佳/艾瑞克)变频器说明书EI-MINI EI-450EI-450M EI-500EI-550EI-600EI-700EI-7001 EI-8001EI Super N17.汇川(INOVNCE)变频器说明书MD300MD300MD320MD33018.远川(YCDZ)变频器说明书YC-G YC-P19.紫日(CHZIRI)变频器说明书ZV7ZV9ZV9V ZV1120.森兰(SENLN)变频器说明书SB50SB60/61SB61Z SB70SB100SB200BT4021.安邦信(MBITION)变频器说明书G9/P9V11G11E11Z9/Z1122.普传(POWTRN)变频器说明书PI97G PI7000/7100PI7500PI7600/7800PI766023.日业(SUNYE)变频器说明书SY320024.日拓变频器说明书25.华蓝(HLinverter)变频器说明书HL200026.神源(SYRUNS)变频器说明书SY4000SY500027.开拓变频器说明书KT-6G/P28.山宇变频器说明书SY6000SJR229.创杰变频器说明书CT-V6G/P/Z CT-M730.亚泰(YT)变频器说明书YTD-G31.传动之星(STR@DRIVE)变频器说明书SD-5L-G/P/Y SD-5L-S SD-7L32.晓磊(CHXL)变频器说明书LEI2000LEI2005LEI300033.星河(XINHE)变频器说明书34.华科(HUNIC)变频器说明书HI3G/HI9G/35.方禾(ngH)变频器说明书TE28066-B66-C36.群倍(QUNBEI)变频器说明书QLP500037.蒙德(MODROL)变频器说明书IMS-G IMS-GL2IMS-GL338.韦尔变频器说明书C30G/P/W/H39.高士达(GOLDSTR)变频器GS200L40.赛普(SPPHIRE)变频器说明书SP500G SP30041.西驰变频器说明书CC1000CC400042.欧瑞(Hinverter)(惠丰)变频器说明书2000-G3*******-G1500-G43.佳灵变频器说明书JB6C-T944.时代变频器说明书TV1000TV3000TV500045.爱迪生(dsen)变频器说明书DS-46.阳冈变频器说明书G1/H1/P1E1S147.九德松益变频器说明书CT-200048.乐邦变频器说明书LB60G LB90G49.日搏变频器说明书RB600RB3000RB500050.日普(RIPOW)变频器说明书RP320051.日锋(Rieng)变频器说明书R200R900052.金肯(JINKEN)变频器说明书JK-G/P53.鹰垦(INK)变频器说明书SLX54.正阳(Zhengyng)变频器说明书ZY29/31/98ZY-81255.米高变频器说明书Micovert2003Micovert340N56.伟创(VEICH)变频器说明书C20C32C60C61-Z C62-L57.德莱尔变频器说明书DV DVM DVS DV100058.易能变频器说明书EDS700EDS286059.时运捷变频器说明书SuperBon-i/iP DB-210060.鸿宝(HOSSONI)变频器说明书HB-G9/P9HB280-G HB280-P HB280-Z61.加能变频器说明书Cmster-H7IPC-MD IPC-DR IPC-R62.微能变频器说明书WIN-VB WIN-9G WIN-9WIN-9I WIN-9L 63.正弦(SINEE)变频器说明书SINE300SINE303SINE307SINE308SINE309 64.四方变频器说明书C300C320E320E350E380E520H320 65.贝西(B&C)变频器说明书BC-1000BC-2000BC-230066.菱科(LINGKE)变频器说明书LK600-G/P/ZS LK80067.合康高压变频器说明书HIVERT通用HIVERT矢量68.吉纳变频器说明书MSC-3MI-Cse00/Cse/CseB69.富凌(ULING)变频器说明书DZB60J DZB70B DZB200M DZB300B70.珠峰变频器说明书DLT-G11/P11/Z11/ZK71.易驱变频器说明书ED2003ED2800ED3000ED300S ED3100 72.威科达变频器说明书V673.中远变频器说明书M6M5/20M3074.美之源(MZY)变频器说明书MZY-M/Y/Z/T/L75.威灵(WELLING)变频器说明书WELLING-G/P/76.斑科(Bntek)变频器说明书BLDC77.基创变频器说明书E35078.腾龙变频器说明书VG3000-G/H79.德瑞斯(DIRISE)变频器说明书DRS1000-M DRS2000DRS2800DRS300080.天正变频器说明书TVS9TVG9/P9TVG1181.雷诺尔变频器说明书JJR1000JJR2000JJR500082.科姆龙变频器说明书KV1900KV200083.德力西变频器说明书CDI900084.日虹变频器说明书CHRH-CHRH-C CHRH-D85.赛普变频器说明书SP900G SP300V86.万谷(WNGU)变频器说明书V200087.世通(ECON)变频器说明书EC1000EC3000EC500088.佛斯特(IRST)变频器说明书ST-500ST-550ST-60089.收获(Seoho)变频器说明书SOHO-VD SOHO-SMS90.威尔凯变频器说明书WK WKS WKR5000类别：变频器 | | 添加到搜藏 | 分享到i贴吧 | 浏览(2142) | 评论 (0)上一篇：变频器说明书资料下载大全2下一篇：PLC编程软件下载已有14人分享了这篇文章：ngxingyng12 T的转贴jtgdqT的转贴yncc35T的转贴lxyyun153T的转贴9b91.哥伦(GRET)变频器说明书GD-V592.东达变频器说明书TDS-8TDS-V893.阿尔法(LPH)变频器说明书LPH2000G LPH2800LPH330094.东元(TECO)变频器/伺服说明书7300EV7300CV7200M7200G7300P7200GS 95.士林变频器说明书SH系列SS系列SB系列96.华腾变频器说明书V5-H E5-P V6-H97.麦孚变频器说明书VD-540VCD100098.海利普变频器说明书HOLIP-//H/M HOLIP-C HOLIP-P99.泓筌变频器说明书HC1-HC1-M100.隆兴变频器说明书LS200LS600LS800101.宁茂(赫力)变频器说明书RM5102.正频(JPS)变频器说明书PDS PD/H/E103.爱得利变频器说明书PXG3S SN MS104.德弗(DOVOL)变频器说明书DV300DV600ST500HL2000105.西林变频器说明书EH600EH600M EH600W EH600Z106.百德福(BEDORD)变频器说明书B500B801107.三碁(SNCH)(三川)变频器说明书S SE108.康沃(博世力士乐)变频器说明书S1G2G3109.春日(KSUG)变频器说明书KVC110.三木(MIKI)变频器说明书V6111.优利康变频器说明书YD3000YD5000112.尤尼康(UNICON)变频器说明书低速大扭矩无码盘有码盘（前身是北京兰海）113.西尔康变频器说明书H3000114.深川变频器说明书SV2000SV3000115.正泰(CHINT)变频器说明书NI01116.中源(ZYDL)变频器说明书ZY-G800ZY-G800E ZY-900ZY-P800117.思达(SD)变频器说明书JPSD3000-G/P/V/H118.路斯特(LUST)驱动器说明书D系列CDD系列119.依托(ESTR)变频器说明书EG/E120.派尼尔(Pioneer)变频器说明书V2100V3000V5000121．佳川(JiChun)变频器说明书BP60JCRQ122．亿森变频器说明书参数表123．沃森(VicRuns)变频器说明书VSI9000124.安川(YSKW)变频器说明书G5G7E77J7V7PC3P5/PC5125.三菱(MITSUBISHI)变频器说明书500E500500S500700E700700D700 126.欧姆龙(OMRON)变频器说明书3G3JV3G3EV3G3V3G3HV3G3MV3G3RV127.富士(UJI)变频器说明书RN-G11S RN-P11S E1S1S RN-Mini/C1S VR-E11S 128.日立(HITCHI)变频器说明书SJ100L100SJ200SJ300SJ300-EL L200L300P 129.松下(PNSONIC)变频器说明书V0V0C V-8Z V100DV700/707M1X M2X130.东芝(TOSHIB)变频器说明书V-nC1V-S9V-S11V-5V-7V-S1131.东洋(TOYO)变频器说明书V61R V64132.住友(SUMITOMO)变频器说明书H320S320H430-500133.三肯(SNKEN)变频器说明书SMCO-i SMCO-vm05SMCO-e M/MS ES/ET/E IH/IP SH/SP 134.明电舍(MEIDEN)变频器说明书VT230S VT230SE VT240S135.LG变频器说明书iS3iH3iG5iS5iH136.现代(HYUNDI)变频器说明书N50N100N300J300137.三星(SMSUNG)变频器说明书MOSCON-E7MOSCON-7MOSCON-500138.意科(IECCO)变频器说明书SINUS-N139.佛朗克(RNCK)变频器说明书RS2000RB6000140.NORD(诺德)变频器说明书SK300E SK400E SK5xxE SK530E SK700E SK750E 141.ETON(伊顿)变频器说明书SVX9000SPX9000MVX9000GVX9000142.西门子(SIEMENS)变频器说明书MM410MM420MM430MM4406R706SE70 143.PE变频器说明书SD100SD250SD450SD700144.TMT变频器说明书PLUS VTC E IP55 PLUS IP55 E145.B变频器说明书1336PLUS II Powerlex 4Powerlex 40Powerlex400Powerlex 70 Powerlex 700146.艾默生(华为)变频器说明书EV1000EV2000EV3000EV3100EV3500TD900TD1000TD2000 TD3000TD3100TD3200TD3300147.BB变频器说明书CS400CS500CS510CS600CS800CS1000148.伦茨(Lenze)变频器说明书8200/82108220/824082309300 Vector149.C Tech变频器说明书MC1000QC SC150.丹佛斯(Dnoss)变频器说明书C51C100C200C300VLT2000VLT2800VLT2900VLT3000VLT5000变频器说明书资料下载大全32010-09-06 21:33151.VCON(瓦控)变频器说明书NX NXS NXL152.LUST(路斯特)变频器说明书CDD3000CDE/CDB3000CDS4000153.WEG变频器说明书CTW-04CW-08CW-09CW-10CW-11154.BONIGLIOLI(邦飞利)变频器说明书CT200/400CU200/400VCB400SYN10S/T SPL200/400155.Drivecon变频器说明书XS XT XR V5100HG V51RG VDB V61C V61V64VK1/VN1VN2 156.CT变频器说明书Commnder GP Unidrive SP Commnder SE157.SIEI(西威)变频器说明书RTDriveL RTDriveG-EV158.KEB(科比)变频器说明书4-S4-5-M5-M/S159.SEW变频器说明书MOVITRC-31C MOVIDRIVE-60B/61B MOVITRC-07MOVIRET-315/328/355/380/3150160.BERGES变频器说明书CM-D2/S2/S3CM-COMPCT SE1SW1161.施耐德变频器说明书TV38TV58-1TV58-2TV61TV68-1TV68-2TV68-3162.pDRIVE变频器说明书MX-eco/pro/multi-eco/multi-pro-1MX-eco/pro/multi-eco/multi-pro-2163.斯德博(STOBER)变频器说明书S4000DS4000MDS5000SDS4000164.欧陆变频器/直流调速器说明书512C590+590P690+590C165.依尔通(Emotron)变频器说明书DU VX VS VSC CDX CDU MS166.葆德(BLDOR)变频器说明书10111214167.Moeller(金钟-默勒)变频器说明书DV6-340D51168.英泰(Invertek DRIVES)变频器说明书Optidrive Plus 3GV Optidrive Plus 3GV Compct Optidrive VTC Optidrive E Optidrive E1Optidrive E2Optidrive MEM 4X169.瑞恩(RELINCE)变频器说明书PSC4000/5000/DDS5000PSC7000VZ3000VZ7000170.派克汉尼汾(prker)变频器说明书C650C650V C690+/ybc7778/blog/item/80528684e023d4211.html ybc7778的空间主页博客相册|个人档案 |好友查看文章各种品牌变频器用户手册下载2010-09-03 09:551 616g5------------- 下载2 616G3 -------------下载3 BB CS400用户手册下载4 BB CS100用户手册下载5 BB CS140用户手册下载6 西门子变频器MM410操作手册下载7 西门子变频器MM420操作手册下载8 西门子变频器MM 430操作手册下载9 西门子变频器 MM 440操作手册下载10 三菱变频器R-500系列下载11 三菱变频器使用手册-R-S540下载12 三菱变频器使用手册-R-E540 中文版下载13 三垦变频器说明书下载14 Delt VD-/H型录下载15 Delt VD-B型录下载16 Delt VD-V型录下载17 Dnoss VLT2800 Proibuss支持下载18 DNOSS VLT?7000 恒压供水专用变频器下载19 艾默生TD3000系列变频器用户手册下载20 艾默生TD2100系列变频器用户手册下载21 艾默生EV2000 系列通用变频器技术手册下载22 欧陆690+系列变频器使用说明书下载23 欧陆直流调速器590P使用手册下载24 三垦 SMCO-i 系列大容量变频器使用说明书下载25 三垦 SMCO-vm05 系列变频器使用说明书下载26 富士VR-E11S系列紧凑型变频器说明书下载27 富士 5000G11S/P11S系列变频器操作说明书下载28 日立变频器SJ300中文操作手册下载29 日立变频器SJ100中文操作手册下载30 日立变频器L100中文操作手册下载31 伦茨8220&8240变频器操作手册下载32 台安SV300系列变频器使用手册下载33 安邦信 MB-G11 使用说明书下载34 安邦信 MB-G9/P9使用说明书下载35 CS501下载·BB CS600用户手册册下载·BB CS400用户手册下载·BB CS100用户手册下载·BB CS140用户手册下载·西门子变频器MM420操作手册下载·西门子变频器MM 430操作手册下载·西门子变频器MM 440操作手册下载·三菱变频器R-500系列下载·三菱变频器使用手册-R-S540下载·三菱变频器使用手册-R-E540 中文版下载·三垦变频器说明书下载·Delt VD-/H型录下载·Delt VD-B型录下载·Delt VD-V型录下载·Dnoss VLT2800 Proibuss支持下载·DNOSS VLT?7000 恒压供水专用变频器下载·艾默生TD3000系列变频器用户手册下载·艾默生TD2100系列变频器用户手册下载·艾默生EV2000 系列通用变频器技术手册下载·欧陆690+系列变频器使用说明书下载·欧陆直流调速器590P使用手册下载·三垦 SMCO-i 系列大容量变频器使用说明书下载·三垦 SMCO-vm05 系列变频器使用说明书下载·富士 5000G11S/P11S系列变频器操作说明书下载·日立变频器SJ300中文操作手册下载·日立变频器SJ100中文操作手册下载·日立变频器L100中文操作手册下载·伦茨8220&8240变频器操作手册下载·台安SV300系列变频器使用手册下载·安邦信 MB-G11 使用说明书下载·安邦信 MB-G9/P9使用说明书下载·UJI RENIC 5000G11S/P11S系列说明书下载UJI RENIC-Mini系列小容量通用紧凑型变频器下载类别：变频器 | | 添加到搜藏 | 分享到i贴吧 | 浏览(980) | 评论 (12)上一篇：汇川变频器PG卡使用说明下一篇：变频器说明书资料下载大全3已有8人分享了这篇文章：ngxingyng12T的转贴花影扫尘T的转贴明你不知道T的转贴zz112212240T的转贴yongzhewudi21T的转贴RRRSHPLT的转贴csy003T的转贴云中长弓张云中T的转贴最近读者：登录后，您就出现在这里。

SR1045中文资料

2800 2400 2000 1600 1200 800 400 0
JUNCTION CAPACITANCE,(pF)
REVERSE LEAKAGE CURRENT, (mA)
10
1.0
Tj=75 C
SR
102
0~S
R1
045
Tj=25 C
.1
SR1
050~
SR1
060
.01
.05
.1
.5
1
5
10
50
NOTES:
SR1020 SR1030
SR1035 SR1040 SR1045
SR1050 SR1060 UNITS
20 14 20
30 21 30
35 24 35
40 28 40 10 150
45 31 45
50 35 50
60 42 60
V V V A A V mA mA pF C/W C C
0.65 10 100 700 3.0 -65 +125 -65 +150 -65
元器件交易网
SR1020
THRU
SR1060
10.0 AMP SCHOTTKY BARRIER RECTIFIERS
VOLTAGE RANGE
20 to 60 Volts
CURRENT FEATURES
* Low forward voltage drop * High current capability * High reliability * High surge current capability * Epitaxial construction
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) Typical Thermal Resistance RqJC (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG

MBRD1045中文资料

MBRB1045, MBRD1045Preferred Device SWITCHMODE tSchottky Power Rectifier Surface Mount Power PackageThis series of Power Rectifiers employs the Schottky Barrier principle in a large metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes.Features•Guardring for Stress Protection•Low Forward V oltage•175°C Operating Junction Temperature•Epoxy Meets UL 94 V−0 @ 0.125 in•Short Heat Sink Tab Manufactured − Not Sheared!•Pb−Free Packages are AvailableMechanical Characteristics:•Case: Epoxy, Molded, Epoxy Meets UL 94 V−0•Weight:1.7 grams for D2PAK (approximately)0.4 grams for DPAK (approximately)•Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable•Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds•Device Meets MSL1 Requirements•ESD Ratings:Machine Model, C (>400 V)Human Body Model, 3B (>8000 V)MAXIMUM RATINGSMaximum ratings applied to the device are individual stress limit values (notnormal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.1.The heat generated must be less than the thermal conductivity fromJunction−to−Ambient: dP D/dT J < 1/R q JA.Preferred devices are recommended choices for future use and best overall value.THERMAL CHARACTERISTICSELECTRICAL CHARACTERISTICSSpecifications Brochure, BRD8011/D.Figure 1. Maximum Forward Voltage 1.2v F , INSTANTANEOUS VOLTAGE (VOLTS)100705.0103.0i F , I N S T A N T A N E O U S F O R W A R D C U R R E N T (A M P S )1.00.60.20.40.81.01.42.0200.10.50.7307.00.350Figure 2. Typical Forward Voltage0.21.2v F, INSTANTANEOUS VOLTAGE (VOLTS)100705.0103.0i F , I N S T A N T A N E O U S F O R W A R D C U R R E N T (A M P S )1.00.60.20.40.81.01.42.0200.10.50.7307.00.3500.25.0150V R , REVERSE VOLTAGE (VOLTS)101.00.10.010.001V R , REVERSE VOLTAGE (VOLTS)250100100.10.010.0011010, R E V E R S E C U R R E N T (m A )I R 2030251005.0501.0I R , R E V E R S E C U R R E N T (m A )35405045Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current201535304540T C , CASE TEMPERATURE (°C)Figure 6. Current Derating, Case,R q JC = 1.0 °C/W2.00I F(AV), AVERAGE FORWARD CURRENT (AMPS)4.0P F (A V ) 6.0108.0121814Figure 7. Forward Power Dissipation, A V E R A G E F O R W A R D C U R R E N T (A M P S )I F (A V )1620010050302070I F S M , P E A K H A L F −W A V E C U R R E N T (A M P S )D 2PAK 3CASE 418B−04ISSUE JVARIABLEVIEW W−WVIEW W−WVIEW W−W123*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*ǒmm inchesǓSCALE 3:1DPAK (SINGLE GUAGE)CASE 369C ISSUE OVSDIMMIN MAX MIN MAX MILLIMETERSINCHES A 0.2350.245 5.97 6.22B 0.2500.265 6.35 6.73C 0.0860.094 2.19 2.38D 0.0270.0350.690.88E 0.0180.0230.460.58F 0.0370.0450.94 1.14G 0.180 BSC 4.58 BSC H 0.0340.0400.87 1.01J 0.0180.0230.460.58K 0.1020.114 2.60 2.89L 0.090 BSC 2.29 BSC R 0.1800.215 4.57 5.45S 0.0250.0400.63 1.01U 0.020−−−0.51−−−V 0.0350.0500.89 1.27Z0.155−−−3.93−−−NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: INCH.ǒmm inchesǓSCALE 3:1*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATIONSWITCHMODE is a trademark of Semiconductor Components Industries, LLC.。

检验项目中英文对照表英文(检验项目英文缩写)

序号中文字母缩写1碱性磷酸酶AKP/ALP 2酸性磷酸酶ACP 3丙氨酸氨基肽酶AAP 4氨基-γ-酮戊酸ALA 5天门冬氨酸氨基转移酶AST/GOT 6丙氨酸氨基转移酶ALT/GPT 7淀粉酶AML/AMS 8无症状性菌尿ABU 9抗酸杆菌AFB 10乙醇、酒精ALC/ALK 11爱滋病AIDS 12抗体包被的细菌ACB 13抗利尿剂ADH 14凝集agg 15急性肾小球肾炎AGN 16枸橼酸-枸橼酸盐葡萄糖(储血稳定ACD 17白蛋白AL （ALB ）18甲胎蛋白AFP 19二磷酸腺苷ADP 20一磷酸腺苷AMP 21三磷酸腺苷ATP 22活化凝血时间ACT 23抗血友病球蛋白AHG 24急性心肌梗死AMI 25α2-抗纤溶酶α2-AP 26活化蛋白C APC 27活化部分凝血酶时间APTT 28α1-抗胰蛋白酶α1-AT 29蕲蛇酶时间AT 30抗凝血酶AT-III 31ATP释放试验ATP-LT 32阿司匹林耐量试验ATT 33巴比妥缓冲液BBS 34急性淋巴细胞白血病ALL 35急性粒细胞白血病临床实验室AML 36阴离子间隙AG 37抗核抗体ANA 38抗链球菌溶血素O ASO 39储碱性白细胞绝对值计数ABC 40布氏杆菌凝集试验ABR 41白蛋白-球蛋白比值A/G 42大气压B 43杆菌B 44细菌Bac45缓冲碱BB46血型BG47溴甲酚绿BCG48胆红素BILI49本-周氏蛋白BJ(BJP) 50血液BLD51葡萄糖GLU52溴麝香草酚兰BTB53基础代谢率BMR basal 54血液尿素氮BUN55血小板计数BP/PLC56巴比妥缓冲液临床实验室BBS57牛血清白蛋白BSA 58巨大血小板综合症BSS59Bigg's凝血活酶生成试验B-TGT60出血时间BT 61骨髓BMR 62血球沉降率BSR 63缓冲液BSS 64血尿酸BUA 65细胞C 66钙Ca 67醋酸纤维薄膜CAF 68补体C3C3 69癌Ca 70慢性肾小球肾炎CGN 71肌酐清除试验CR72氯化物、氯元素符号CL73胆固醇CO/CHO 74胆碱脂酶CHE75慢性粒-单细胞白血病CMML76肌酐CR 77肌酸CRE78尿素清除（廓清）率CU(CUR)79肌酸（磷酸）激酶CK/CPK 80变异系数CV81癌胚抗原CEA82慢性淋巴细胞性白血病CLL83慢性粒细胞性白血病CGL84慢性骨髓性白血病CML 85二氧化碳结合力CO2CP 86血块收缩CR87完全缓解CR88C-反应蛋白CRP 89血块收缩时间CRT90脑脊液CSF 91凝血时间CT 92全血细胞计数CBC 93红细胞冷凝集试验CHA 94巨细胞病毒CMV 95碳氧血红蛋白COHB 96白细胞分类计数DC 97弥漫性血管内凝血DIC 98脱氧核糖核酸DNA 99D-二聚体DD 100直接胆红素DB 101十二指肠液分析DFA 102蒸馏水DW 103酶E 104嗜酸性粒细胞EOS 105嗜酸性粒细胞计数EC 106酶联免疫吸附试验ELISA 107优球蛋白溶解时间ELT 108酶免疫测定法EIA 109致病性大肠杆菌EPEC110E玫瑰花环形成试验（正常34-62%）ERFT111红细胞沉降率ESR 112雌三醇试验ET 113电泳临床实验室EP 114纤维蛋白原FG115纤维蛋白原降解产物FDP116乳胶凝集试验FIT 117纤维蛋白肽A FPA 118纤维蛋白肽B FPB 119游离脂肪酸FFA 120淋球菌GC 121颗粒管型GC 122谷胺酰基转移酶GGT 123葡萄糖GLU 124气液相色谱法GLC 125革兰氏阴性GN 126胃液分析GA 127谷氨酸脱氢酶GDH128葡萄糖-6-磷酸脱氢酶G6PD129葡萄糖氧化酶GOD 130革兰氏阳性杆菌GPB(GPC) 131γ-谷氨酸转肽酶γ-GTP132葡萄糖耐量试验临床实验室GTT133羟丁酸脱氢酶HBDH 134胎儿型血红蛋白HB-F135镰刀型红细胞中发现血红蛋白HB-S136高密度脂蛋白HDL 137血球凝集抑制试验HAIT 138血红蛋白HB(HGB) 139透明管型HC140人绒毛膜促性腺激素HCG14117-羟类固醇17-HOCS142高倍（显微镜用语）HP143高倍视野（显微镜用语）HPF144高速液相色谱法HSLC 145高效液相色谱法HPLC 146红细胞压积HCT 147重链HC 1485-羟色胺5-HT 149血液流变学HR150酸溶血试验临床实验室Ham's151甲型肝炎病毒HAV 152乙型肝炎病毒HBV 153丙型肝炎病毒HCV 154丁型肝炎病毒HDV 155戊型肝炎病毒HEV 156乙型肝炎表面抗原HbsAg 157乙型肝炎表面抗体HbsAb 158乙型肝炎e抗体HbeAb 159乙型肝炎e抗原HbeAg 160乙型肝炎核心抗原HbcAg 161乙型肝炎核心抗体HbcAb162变形珠蛋白小体试验HHB163人类白细胞抗原HLA164高密度脂蛋白胆固醇HDL-C165氰化高铁血红蛋白HICN 166溶血性贫血HA 167甲型肝炎抗原HA-Ag168人郛头瘤状病毒临床实验室HPV169辣根过氧化物酶HRP170单纯疱疹病毒HSV171己糖（磷酸）激酶HT HCT HX 172毛细胞白血病HCL173免疫球蛋白Ig174免疫球蛋白A IgA175免疫球蛋白G IgG176免疫球蛋白M IgM177免疫球蛋白E IgE178免疫球蛋白D IgD179无机磷IP180国际单位IU181放射免疫试验IRMA 182中间密度脂蛋白IDL 183间接胆红素IB 184铁结合蛋白IBP 185免疫复合物IC 186免疫活性细胞ICC187缺铁性贫血临床实验室IDA188原发性血小板减少性紫ITP189免疫电泳IE 190间接荧光抗体试验IFA191传染性单核细胞增多症IM192酮体KET 19317-酮类固醇试验17-KST 194千克KG 195卡门氏单位KU196白陶土活化部分凝血酶时间KPTT197郛酸脱氢酶LDH 198低密度脂蛋白LDL 199红斑狼疮细胞LEC200低倍（显微镜用语）LP201淋巴细胞LYM 202亮氨酸氨基肽酶LAP 203郛胶凝集试验LAT204低密度脂蛋白胆固醇LDL-C205β-脂蛋白β-LP 206脂蛋白电泳LPE 207郛胶凝集反应LPA 208白细胞LEU 209溶菌酶LYZ210骨髓异常增生综合症MDS211摩尔M212单核细胞M(MON) 213肌红蛋白Mb214苹果酸脱氢酶临床实验室MDH215微丝蚴Mf216β2-微球蛋白β2-MG 217镁Mg 218毫克分子mM 219中段尿标本MSU 220毫渗量MOSM 221平均红细胞体积MCV222平均红细胞血红蛋白量MCH223平均红细胞血红蛋白浓度MCHC224平均血小板体积MPV 225单胺氧化酶MAO 226阴性NEG 227亚硝酸盐NIT228正常范围NR229嗜中性粒细胞N230α-醋酸萘酚酯酶ANAE 231有核红细胞NRBC 232生理盐NS233正常血清NS234隐血OB 23517-羟皮质类固醇17-OHCS 236渗透压（量）OSM 237光密度OD238鸟氨酸脱氢酶ODC 239血浆P240磷P241聚合酶链式反应PCR 242蛋白质PR243聚丙烯酰胺凝胶电泳PAGE244酸碱度、氢离子浓度PG245阵发性冷血红蛋白尿PCH246阵发性夜间血红蛋白尿PNH247苯丙酮尿症PKU 248阳性POS 249沉淀物PPT 250酚红PR 251酚红排泄试验PST252微微克（10-12克），皮克PG253甲状旁腺激素PTH254血浆硫酸鱼精蛋白副凝固试验临床实验室3P255血小板粘附试验PADT 256血小板活化因子PAF 257血小板聚集试验PAGT 258磷酸盐缓冲液PSB 259蛋白C PC 260凝血酶原消耗试验PCT 261磷酸二酯酶PD 262聚乙二醇PEG 263血小板第3因子PF3 264血小板第4因子PF4 265贫血小板血浆PPP 266富血小板血浆PRP267血小板PLT 268血小板计数PLC 269血浆复钙时间PRT 270血浆凝血酶原时间PT 271部分凝血酶时间PTT 272二氧化碳分压P CO2 273氧分压PO2 274动脉二氧化碳分压Paco2 275末稍血液淋巴细胞PBL 276浆细胞性白血病PCL 277真性红细胞增多症PCV 278植物血凝素PHA 279等电点PI280血小板免疫荧光试验PLFT281百万分之一PPM 282过氧化物酶POX283过碘酸-雪夫氏反应法PAS284反应R285红细胞RBC286红细胞计数Red blood cell count 287转/分REV/MIN288放射免疫分析RIA289常规RT290蝰蛇毒时间RVVT291核糖核酸RNA292网织红细胞RET293类风湿因子临床实验室RF294快速血浆反应时间RPR295标准S296血清S297溶液SOL298血清蛋白电泳SPE299标本SPEC 300超氧化物岐化酶SOD301中性分叶核白细胞SEG(SG）302国际单位制SI303水溶液SOLAQ 304饱和溶液SOLSAT 305分光光度荧光计SPF306比重SG307血氧饱和度SAT308血清铁SI309标准碱量SBC310选择性蛋白尿SPU311嗜中性杆状核粒细胞ST312志贺氏菌属SH 313葡萄球菌STA314链球菌属STR 315磺胺类SU316脑脊液细胞计数SFC 317系统性红斑狼疮SLE 318标准差SD319试验、测定T320时间T321结核杆菌TB322总蛋白TP323总尿量TVU 324二氧化碳总量TCO2 325甘油三酯TG326麝香草酚浊度试验TTT 327转移因子TA328总胆红素TB(TBIL) 329总铁结合力TIBC330T-细胞花环形成试验TRT331三糖铁试验TST 332单位U333尿液U334尿肌酐UCR 335尿肌酸UCRE 336尿素清除率UCL 337尿常规临床实验室UR338尿分析URANAL 339尿胆素原URO 340尿尿酸UUA 341尿尿素氮UUN 342尿酸UD 343体积V344香草酸杏仁酸VMA 345血管性假血友病VWD 346极低密度脂蛋白VLDL 347白细胞计数WBC 348嗜中性粒细胞N349嗜碱性粒细胞B350嗜酸性粒细胞E351成熟细胞M352幼稚细胞J353杆状核细胞St354分叶核细胞Sg355淋巴细胞L356单核细胞Mon 357白细胞管型WCC 358外-裴氏反应WFR 359世界卫生组织WHO 360波长WL 361弱阳性WP 362重量与重量比W/W 363X-脂蛋白XLP364交叉配血XM 365为正常男性染色体XY 366为正常女性染色体XX英文Alkaline phosphataseAcid phosphataseAlanimine peptidaseAminolenulinic acidAspartate aminotransferaseAlanine aminotransferaseamylaseAsymptomatic bacteriuriaacid-fast bacillusalcoholAcquired immune deficidency syndrome antibody-coated bactiaanti-diuretic hormoneagglutinationAcute glomerulonephritisacid-citrate dextrosealbuminalpha-fetoproteinAdenosine diphospateAdenosine monophospateAdenosine triphospateActive clitting timeAntiiheomphilie globulinAcute myocardial infarctionα2-antiplasminActive protein CActive partial thrombolastin timeα1-antitrypsinAcutalase timeantinyombin-IIIAdenosine triphosphate liberate test Aspirin tolerance testBarbitone bufferAcute lymphatic leukemiaAcute myelogenous leukimiaAnion gapAntinucleus antibodyantistreptolysin-OAbsolute basophil countAgglutination test for brucellosis albumin-globulin ratiobarometriebacillusbacteriaBuffer baseBlood groupBuomocresol greenbilirubinBence Jones ProteinbloodglucoseBromothymol blueMetabolic rateBlood urea nitrogenBlood/platelet count or platelet countBarbitone bufferBovine serum albuminBernard-soulier syndyomeBigg's thromboplastin generation testBleeding timeBone marrowBlood sedimentation rateBuffered salt or saline solutionBlood urie acidcellcalciumceuuolse-acetafoliccomplement3carcinoma/cancerChronic glomerulone phritisCreatinine clearancechlorine,chloridecholesterolcholinestetrasechroniccreatininecreatineUrea clearanceCreatine kinase/phosphokinase Coefficient of vaviation Carcinoembryonic antigenChronic lymphocytic leukemiaChronic granulocytic leukemiaChronic myelogneous leukemiaCarbon dioxide combiding powerClot retractionComplete remissionC-reaction protienClot retraction timeCerebral spinal fluidCoagulation timeComplete blood countCold hemaglutination test cytomegaloviruscarboxyhemoglobinDifferential count of leucocyte Disseminated intravascular coagulation Deoxyrinbonucleic acidD-dimerDirect bilirubinDuodenal fluid analysisDistilled waterenzymeeosinophilEosinophil countEnzyme linked immunosorbent assay Euglobulin lysis timeEnzyme immunoassayEnteropathogenic eseherichia coliE-rosette forming testErythrocyte sedimentdetion rateEstriol testelectrophoersisfobrinogenFibrinogen degradation productFibronopeptide AFibronopeptide BFree fatty acidgonococcusGranular castGama glutamyltransferaseγglucosegas-liquid chromatographygram's negativeGastric analysisGlutamate dehydrogenaseglucose-6-phosphate dehydrogenaseGlucose oxiddasegram's positive bacillusγ-glutamyl-transpeptidaseGlucose tolerance testHydroxybutyrate dehydrogenase Hemoglobin fetal formhemoglobin,from found in sickle cellhigh-density lipoprotein Hemoagglutinationinhibition test hemoglobinHyaline castHuman chorionic gonadotropin17-hydroxycortico steroidHigh powerHigh power fieldHigh speed liquid chromatographyHigh gerformence liquid chromatography hematocritHeavy chain5-hydroxy-tryptamincehemorrheologyHam'sHepatitis A virusHepatitis B virusHepatitis C virusHepatitiss D virusHepatitis E virusHepatitis B surface antigenHepatitis B surface antibodyHepatitis B e antibodyHepatitis B e antigenHepatitis B core antigenHepatitis B core antibodyHeinz bodiesHuman leukocyte antigenHigh density lipoprotein cholesterolHemolytic anemiaHepatitis A antigenHuman papilloma virusHorseradish peroxidaseHerpes simple virushexokinaseHairycell leukemiaimmunoglobulinImmunoglobulin AImmunoglobulin GImmunoglobulin MImmunoglobulin EImmunoglobulin DInorganic phosphorusInternational unitImmnnoradiometric assayintermediate-density lipoprotein Indirect bilirubinIron binding proteinImmune complexImmunological competent cellIron deficiency anemiaIdiopathic thrombocytopenic purpuraImmune electrophoresisIndirect fluorescent antibody Infectious mononucleosisKetone-bodies17-ketosteroid testkilogramKarmen unitKaolin activated partial thrombplastin timeLactate dehydrogenaselow-density lipoproteinLupus erythematosus cellLow powerlymphocyteLeucine aminopeptidaseLatex agglutination testlow-density lipoprotein cholesterolβ-lipoproteinLipoprotein electrophoresisLatex particles agglutination leukocytelysozymeMydldysplastic syndromemolmonocytemyoglobinMalate dehydrogenasemicrofilariaeβ2-microglobulinmagnesiummillimolmid-stream urine spceimenmiuiosmolMean corpuscular volumeMean corpuscular hemoglubinMean corpuscular hemoglobin concentrationMean platelet volumeMicromine oxidasenegativeNitrite testNormal rangeNeuthophil leukocyte nuetroα-naphthol acetate esterase Nucleared red blood cellNormal salineNormal serumOccult blood17-hydroxycorticosteroidosmolOptical densityOrnithine decarboxylaseplasmaphosphorusPolymerase chain reactionproteinPolyacry lamide gel electrothoresis Hydrogen jon exponentParoxysmal cold hemoglobinuria Paroxysmal nocturnal hemoglobinuriaphenyketonuriapositiveprecipitateHenol redPhenol sulfonphthalein testpicogramProxjmal renaltubular acidosisPlasma protamine paracoaggulation testPlatelet adhension testPlatelet activating factorPlatelet aggregate testPhosphate bufferProtein CProthrombin consume test phosphodiesterasePolyethylene glycolPlatelet factor 3Platelet factor 4Platelet poor plasmaPlatelet rich plasmaplateletPlatelet countPlasma reclcification time Prothrombin timePartial thrombplastin timePartial pressure of carbon dioxide Partial pressure of oxygenArterial carbondioxide tension Peripheral blood lymphocyte Plasma cell leukemiaPolycythemia vera phxtohemagglutiminIsoelectric pointPlatelet immunofluorescence testParts per millionperoxidasePeriodic acid schiff's reactionreactionRed blood cellRevolutions per minuteRadio immunoassayroutineRusscll viper venon time Ribonucleic acidreticulockyteRhermatoid factorRapid plasma reaction test standardserumsolutionSerum protein electrophoresis specimenSuperoxide dismubaseSegeroxide dismutaseInternational system unitAqueous solutionsolutionsaturata spectorphofluorometerSpecific gravitySerum ironSelective proteinuriaStaff nedutdrophilshigellastaphylococcusstreptocdccussulfaSpinal fluid countSystem lupus erythematosis Standard deviationtesttimeTubercle bacillusTatal proteinTatal volumn urinetriglycerideThymol turbidity test Transfer agentTotal bilirubinTotal iron binging capacityT-cell rosette formationTriple sugar iron testuniturineUrine creatineUrine creatineUrea clearanceUrine routineUrine analysisurobilinogenUrine urea acidUrine urea nitrigenUrine acidvolumeVanillyl mandelic acidVon willebrand diseaseVery low-density lipoprotein White blood cellWhite cell castweil-felix reactionWorld heath organization Wave lengthWeakly positiveWeight in weightx-lipoproteinx-matching,cross matching。

Belimo F765-150SHP 65型号冷暖水 throttle阀数据表说明书

F765-150SHP•Reinforced Teflon Seat, 316 Stainless SteelType overviewType DNF765-150SHP65 Technical dataFunctional data Valve Size 2.5" [65]Fluid chilled or hot water, up to 60% glycolFluid Temp Range (water)-22...400°F [-30...204°C]Body Pressure Rating ANSI Class 150Close-off pressure ∆ps285 psiFlow characteristic modified linear, unidirectionalServicing maintenance-freeFlow Pattern3-way Mixing/DivertingLeakage rate0%Controllable flow range quarter turn, mechanically limitedCv146Maximum Velocity32 FPSLug threads5/8-11 UNCMaterials Valve body Carbon steel full lug (ASME B16.34)Stem17-4 PH stainless steelSeat RPTFEPipe connection ASME/ANSI class 150 flangeBearing glass backed PTFEDisc316 stainless steelGland Seal TFESuitable actuators Non-Spring GMB(X)(2*GMB(X))PRB(X)Electrical fail-safe(2*GKB(X))PKRB(X)Safety notesWARNING: This product can expose you to lead which is known to the State of California tocause cancer and reproductive harm. For more information go to F765-150SHP Product featuresFlow/Mounting detailsDimensionsType DNF765-150SHP65A B C D E F Number of Bolt Holes12.4" [316]10.4" [264]15.3" [389]11.8" [300]6.8" [172]5.0" [127]4A B C D E F Number of Bolt Holes20.1" [510]10.4" [264]17.4" [443]13.8" [350]6.8" [172]5.0" [127]42*GM/2*GKA B C D E F Number of Bolt Holes16.8" [426]10.4" [264]15.3" [389]11.8" [300]6.8" [172]5.0" [127]42*GMA B C D E F Number of Bolt Holes14.1" [358]10.4" [264]13.1" [333]9.6" [243]6.8" [172]5.0" [127]4PRA B C D E F Number of Bolt Holes14.1" [358]10.4" [264]17.8" [451]14.3" [363]6.8" [172]5.0" [127]4PKA B C D E F Number of Bolt Holes14.6" [370]10.4" [264]17.4" [443]13.8" [350]6.8" [172]5.0" [127]4NEMA 4, Modulating Control, Non-SpringReturn, Direct Coupled, 24 V, Multi-Function Technology®Technical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 8 W Power consumption in rest position 2.5 W Transformer sizing 11 VAElectrical Connection Terminal blocksOverload Protectionelectronic throughout 0...95° rotation Functional dataOperating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for PWM, On/Off and Floating point Operating range Y variable Start point 0.5...30 V End point 2.5...32 VOperating modes optional variable (VDC, on/off, floating point)Position feedback U 2...10 V Position feedback U note Max. 0.5 mA Position feedback U variable VDC variableDirection of motion motor selectable with switch 0/1Manual override under cover Angle of rotation Max. 95°Angle of rotation note adjustable with mechanical stop Running Time (Motor)150 s / 90°Running time motor variable 90...150 s Noise level, motor 45 dB(A)Position indicationMechanically, 5...20 mm stroke Safety dataPower source ULClass 2 Supply Degree of protection IEC/EN IP66/67Degree of protection NEMA/UL NEMA 4XEnclosure UL Enclosure Type 4XAgency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001Ambient humidity Max. 100% RH Ambient temperature -22...122°F [-30...50°C]Ambient temperature note -40...50°C for actuator with integrated heating Storage temperature -40...176°F [-40...80°C]Servicingmaintenance-freeFootnotesWeight Weight9.9 lb [4.5 kg]MaterialsHousing material Die cast aluminium and plastic casing†Rated Impulse Voltage 800V, Type action 1, Control Pollution Degree 3.AccessoriesElectrical accessoriesDescriptionType Battery backup system, for non-spring return models NSV24 US Battery, 12 V, 1.2 Ah (two required)NSV-BAT Service Tool, with ZIP-USB function, for programmable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH USFactory add-on option onlyDescriptionTypeHeater, with adjustable thermostatN4 Heater Add-on 24V (-H)Electrical installationINSTALLATION NOTESActuators with appliance cables are numbered.Provide overload protection and disconnect as required.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hotconnection of the controller. Position feedback cannot be used with a triac sink controller; theactuator internal common reference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators are provided with a numbered screw terminal strip instead of a cable.Actuators may be controlled in parallel. Current draw and input impedance must be observed.Master-Slave wiring required for piggy-back applications. Feedback from Master to controlinput(s) of Slave(s).Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.Wiring diagrams On/OffFloating PointVDC/mA Control PWM ControlOverride Control Primary - Secondary。

急性心肌梗死病人特质与状态错失恐惧在基本心理需要满足与幸福感间的中介效应

急性心肌梗死病人特质与状态错失恐惧在基本心理需要满足与幸福感间的中介效应沈亚奇,王干梅*,李爱仙昆山市第二人民医院,江苏215300M e d i a t i n g e f f e c to ft r a i t-s t a t ef e a ro f m i s s i n g o u to n b a s i c p s y c h o l o g i c a ln e e d ss a t i s f a c t i o na n d h a p p i n e s s i n p a t i e n t sw i t ha c u t em y o c a r d i a l i n f a r c t i o nS H E NY a q i,W A N GG a n m e i,L IA i x i a nK u n s h a nS e c o n dP e o p l e'sH o s p i t a l,J i a n g s u215300C h i n aC o r r e s p o n d i n g A u t h o r W A N GG a n m e i,E-m a i l:734366121@q q.c o mK e y w o r d s a c u t e m y o c a r d i a l i n f a r c t i o n;b a s i c p s y c h o l o g i c a ln e e d ss a t i s f a c t i o n;h a p p i n e s s;t r a i t-s t a t ef e a ro f m i s s i n g o u t;m e d i a t i n g e f f e c t;i n f l u e n c i n g f a c t o r摘要目的:探讨特质与状态错失恐惧在急性心肌梗死(AM I)病人基本需要满足与幸福感之间的中介效应㊂方法:采用便利抽样的方法选取本院2021年5月 2022年1月收治的284例AM I病人作为调查对象,将自制的一般情况调查表㊁特质-状态错失恐惧量表(T-SF o MO S)㊁基本心理需要满足量表(B P N S S)㊁纽芬兰大学幸福感量表(MU N S H)作为调查工具对其进行调查㊂结果:AM I 病人基本心理需要满足得分(112.39ʃ15.33)分,幸福感得分(32.74ʃ7.52分),特质错失恐惧得分(18.43ʃ6.72)分,状态错失恐惧得分(27.47ʃ8.66)分㊂P e a r s o n相关性分析可得,AM I病人基本心理需要满足与幸福感存在正相关性(P<0.001),特质错失恐惧㊁状态错失恐惧与心理需要满足㊁幸福感存在负相关性(P<0.001)㊂中介效应分析结果显示,特质错失恐惧在基本心理需要满足与幸福感之间的路径系数为0.202,占总路径22.62%,状态错失恐惧在基本心理需要满足与幸福感之间的路径系数为0.205,占总路径22.96%,特质错失恐惧和状态错失恐惧的链式中介效应为0.103,占总路径11.53%㊂结论:AM I病人的特质与状态错失恐惧在基本心理需要满足对幸福感的影响中起部分中介作用,医护人员应该采取系统化的措施降低病人特质与状态焦虑程度,提高其心理需要满足感,从而增强其幸福感㊂关键词急性心肌梗死;基本心理需要满足;幸福感;特质与状态错失恐惧;中介效应;影响因素d o i:10.12102/j.i s s n.2095-8668.2023.14.025‘中国心血管健康与疾病报告“2020指出,随着人口老龄化,心血管疾病的患病率逐年递增,2018年,心血管疾病的死亡率在所有死亡原因中位列第3位[1]㊂急性心肌梗死(a c u t e m y o c a r d i a l i n f a r c t i o n,AM I)在心血管系统中属于急危重症,具有发病急骤㊁进展迅速㊁病情凶险等特点[2]㊂2015年,欧洲心脏病联盟提出,心理社会因素是冠心病病人临床结局的重要影响因素之一[3]㊂主观幸福感是指评价者自身依据标准对作者简介沈亚奇,主管护师,本科*通讯作者王干梅,E-m a i l:734366121@q q.c o m引用信息沈亚奇,王干梅,李爱仙.急性心肌梗死病人特质与状态错失恐惧在基本心理需要满足与幸福感间的中介效应[J].循证护理,2023,9(14):2595-2600.自己的生存质量和心理健康水平的整体评价,是重要的综合性心理指标[4]㊂基本需要满足理论将人类的需要分为3种基本类型,即自主需要㊁关系需要以及胜任需要[5]㊂基本需要满足是指外界环境对个体以上基本心理需要的满足程度,不仅可激发个体内部动机,还可使外部动机内化,从而达到自我激励㊁提升幸福感的目的[6-9]㊂错失焦虑是指在新媒体时代下,因社交媒体的频繁使用,个体对可能错失任何正性信息的担忧,其包括特质错失焦虑和状态错失焦虑[10]㊂有研究指出,个体错失焦虑可能是心理需求不满足而导致,但错失焦虑又会导致个体产生负性情绪,甚至引发躯体症状,其错失焦虑与基本心理需要存在负性相关[11]㊂此外,也有研究指出,个体错失焦虑与幸福感存在相关性[12]㊂基于此,本研究通过建立结构方程模型,探讨特质与状㊃5952㊃循证护理2023年7月第9卷第14期(总第106期)Copyright©博看网. All Rights Reserved.态错失恐惧在AM I病人基本需要满足与幸福感之间中介效应,从而为改善AM I病人的心理状态,提升其幸福感的干预措施制定提供参考依据㊂1对象与方法1.1对象采用便利抽样的方法选取本院2021年5月 2022年1月收治的AM I病人为调查对象㊂纳入标准:1)年龄ȡ18岁;2)符合‘内科学“第7版关于心肌梗死的诊断标准[13];3)能够独立填写问卷;4)签订知情同意书㊂排除标准:1)合并脑卒中㊁肝肾功能障碍㊁恶性肿瘤等严重疾病;2)伴有精神疾病或智力障碍;3)近期(2~3个月)有精神类药物服用史或吸毒史㊂调查人数应为纳入调查项目的10~15倍[14],本研究共15个项目,应调查150~225例,考虑到10%~30%失访率,样本量至少165例,本研究样本量为292例㊂1.2方法1.2.1调查工具1)基本情况问卷㊂采用本课题组自制的问卷调查AM I病人性别㊁年龄㊁文化程度㊁婚姻状况㊁是否伴有其他慢性疾病(糖尿病㊁高血压㊁慢性阻塞性肺疾病或其他慢性病)㊁婚姻状态㊁是否独居㊁子女人数㊁家庭人均月收入㊁有无固定职业和自评睡眠质量等㊂2)特质-状态错失恐惧量表(T r a i t-S t a t eF e a ro fM i s s i n g O u t S c a l e,T-SF o MO S)㊂T-SF o MO S由W e g m a n n等[15]编制,用于评估个体特质性与状态性错失恐惧状况,后由肖曼曼等[16]于2019年汉化翻译,得到中文版量表,其C r o n b a c h'sα系数为0.824,包括特质性错失恐惧(5个条目)和状态性错失恐惧(7个条目)2个维度,共12个条目,每个条目选择L i k e r t5点计分,1~5分依次为非常不同意到非常同意 ,总分12~60分,得分越高,受访AM I病人特质及状态错失恐惧程度越高㊂3)基本心理需要满足量表(t h eB a s i cP s y c h o l o g i c a l N e e d sS a t i s f a c t i o n S c a l e,B P N S S)㊂B P N S S由D e c i 等[17]于2001年编制,用于评估个人生活中的心理满足需求程度,后由谢东杰等[18]于2009年进行中文翻译和修改,中文版量表内部一致性C r o n b a c h'sα系数为0.876,包括能力需要(6个项目)㊁关系需要(8个条目)和自主需要(7个条目)3个维度,共21个条目,每个条目选择L i k e r t7点计分,1~7分依次为完全不同意到完全同意 ,总分21~147分,得分越高,病人心理满足需要程度越高㊂4)纽芬兰大学幸福感量表(M e m o r i a l U n i v e r s i t y o f N e w-f o u n d l a n d S c a l e o f H a p p i n e s s,MU N S H)㊂MU N S H由K o z m a等[19]编制,用于反映个体生活满意度指数和情感平衡状态,后由刘仁刚等[20]进行中文翻译及修订,中文版量表C r o n b a c h'sα系数为0.815,内容效度为0.785,包括正性情感(p o s i t i v ea f f e c t i o n,P A)㊁负性情感(n e g a t i v e a f f e c t i o n,N A)㊁正性体验(p o s i t i v ee x p e r i e n c e,P E)和负性体验(n e g a t i v e e x p e r i e n c e,N E)4个维度,其中P A 和N A均为5个条目,P E和N E均为7个条目,共24个条目,每个条目0~2分,回答是计2分,回答不知道计1分,回答否计0分,总分=P A得分-N A 得分+P E得分-N E得分+常数,常数为24,总分0~48分,得分越高,病人幸福感越高㊂1.2.2调查方法本研究调查开始前1周,按照纳入和排除标准选择50例AM I病人进行预调查,由病人自行填写,时间为5~8m i n,发放问卷50份,收回有效问卷50份㊂T-SF o MO S内部一致性C r o n b a c h'sα系数为0.752, B P N S S内部一致性C r o n b a c h'sα系数为0.898, MU N S H内部一致性C r o n b a c h'sα系数为0.824㊂正式调查地点为医护值班室,由2名课题组成员进行调查,其中1名采取统一规范语言向受访AM I病人讲解本次调查目的㊁意义和过程,另1名发放问卷,由病人自行填写,规定填写时间为8m i n,填写结束当场收回,不记录姓名㊂2名调查者复核收回问卷有无漏填,共发放问卷292份,收回292份,得到有效问卷284份,有效问卷率97.26%,采取双人录入方式将问卷数据整理输入电脑㊂1.2.3统计学方法采用S P S S24.0及其插件P r o c e s s3.0对本研究数据进行统计分析,定性资料采用例数㊁百分比(%)描述,符合正态分布的定量资料以均数ʃ标准差(xʃs)描述,采用H a r m a n单因子检验法检验所有因子共同方法偏差效应,B o o s t r a p法检验结构方程模型拟合度,检验水准α=0.05㊂2结果2.1 AM I病人一般资料284例AM I病人,年龄34~79(52.75ʃ14.72)岁,基本情况具体见表1㊂㊃6952㊃C H I N E S EE V I D E N C E-B A S E D N U R S I N GJ u l y,2023V o l.9N o.14Copyright©博看网. All Rights Reserved.表1 AM I 病人一般资料(n =284) 项目例数构成比(%) 项目例数构成比(%)性别男16959.51是否独居是8730.63 女11540.49 否19769.37年龄 <46岁4214.79伴有其他慢性疾病是7626.76 46~<56岁7526.41 否20873.24 56~<66岁9031.69家庭人均月收入 <3000元6823.94 ȡ66岁7727.11 3000~4000元10737.68文化程度小学6723.59 >4000~5000元7727.11 初中6823.94 >5000元3211.27 高中/中专8630.28有无固定职业有18665.49 专科/本科4114.44 无9834.51 硕士及以上227.75自评睡眠质量差11540.49婚姻状况未婚6823.94 正常11139.08 已婚15454.23 好5820.42 丧偶217.39有无智能手机有20271.13 离异4114.44 无8228.87子女人数 0个6823.94有无固定锻炼习惯有8128.52 1个15755.28 无20371.48ȡ2个5920.772.2 AM I 病人基本心理需要满足㊁幸福感㊁特质-状态错失恐惧得分情况A M I 病人基本心理需要满足得分为(112.39ʃ15.33)分,幸福感得分为(32.74ʃ7.52)分,特质错失恐惧为(18.43ʃ6.72)分,状态错失恐惧为(27.47ʃ8.66)分㊂2.3 基本心理需要满足㊁幸福感㊁特质-状态错失恐惧的相关性(见表2)表2 基本心理需要满足㊁幸福感㊁特质-状态错失恐惧的相关性分析结果变量基本心理需要满足幸福感特质错失恐惧状态错失恐惧基本心理需要满足1.0000.672①-0.427①-0.476①幸福感1.000-0.463①-0.465①特质错失恐惧1.0000.724①状态错失恐惧1.000①P <0.001㊂2.4 共同方法偏差检验采用H a r m a n 单因子检验对15个检测因子进行偏差检验,可得10个因子特征值>1,第1个主因子解释变异量为12.74,小于邓稳根等[21]研究中指出存在共同方法偏差效应40%临界标准,排除15个检测因子彼此间存在共同方法偏差效应㊂2.5 中介效应检验设置AM I 病人基本情况为控制变量,根据链式中效应验证方法可得,方程1:基本心理需要满足正向预测幸福感(β=0.537,P <0.001);方程2:基本心理需要满足能反向预测特质错失恐惧(β=-0.528,P <0.001);方程3:基本心理需要满足能反向预测状态错失恐惧(β=-0.517,P <0.001);方程4,特质错失恐惧和状态错失恐惧作为中介效应,降低基本心理需要满足对幸福感正向预测作用,见表3㊂表3 中介效应检验结果变量方程1β值t 值P方程2β值t 值P方程3β值t 值P方程4β值t 值P性别0.4154.227<0.001-0.4244.109<0.001-0.4314.214<0.0010.3393.2870.006年龄0.7235.238<0.001-0.7245.204<0.001-0.7145.186<0.0010.6154.663<0.001文化程度0.7025.239<0.001-0.6625.186<0.001-0.6455.027<0.0010.4424.259<0.001基本心理需要满足0.5374.231<0.001-0.5284.162<0.001-0.5174.108<0.0010.4774.2820.002特质错失恐惧-0.4463.6720.001状态错失恐惧-0.4353.5490.003R 2值0.8670.8530.8720.924调整R 2值0.7340.7040.7560.874F 值26.12524.77227.28635.182P<0.001<0.001<0.0010.001㊃7952㊃循证护理2023年7月第9卷第14期(总第106期)Copyright ©博看网. All Rights Reserved.2.6中介效应路径分析以基本心理需要满足为预测变量,幸福感为效应变量,特质错失恐惧和状态错失恐惧为中介效应,选择P r o c e s s3.0模型6对中介效应进行结构方程模型分析,B o o t s t r a p采样数N=5000,可得标准化路径模型参数:χ2/自由度(d f)=4.754,近似误差均方根(R M S E A)=0.072,T u c k e r-L e w i s指数(T L I)= 0.918,比较拟合指数(C F I)=0.943,拟合优度指数(G F I)=0.927,AM I病人基本心理需要满足对幸福感总路径系数为0.893,直接路径系数为0.383,占总路径42.89%;特质错失恐惧在基本心理需要满足与幸福感之间中介效应路径系数为0.202,占总路径22.62%;状态错失恐惧在基本心理需要满足与幸福感之间中介效应路径系数为0.205,占总路径22.96%,特质错失恐惧和状态错失恐惧的链式中介效应为0.103,占总路径11.53%,见图1㊁表4㊂图1 AM I病人特质与状态错失恐惧在基本心理需要满足与幸福感间的中介效应模型表4 AM I病人特质与状态错失恐惧在基本心理需要满足与幸福感间中介效应的路径分析路径路径系数t值P95%置信区间(C I)基本心理需要满足ң幸福感0.3834.822<0.001[0.125,0.685]基本心理需要满足ң特质错失恐惧ң幸福感0.2023.4320.002[0.082,0.438]基本心理需要满足ң状态错失恐惧ң幸福感0.2053.2250.006[0.097,0.447]基本心理需要满足ң特质错失恐惧ң状态错失恐惧ң幸福感0.1032.3380.015[0.024,0.275]3讨论3.1 AM I病人基本心理需要满足㊁幸福感㊁特质与状态错失恐惧现状3.1.1幸福感本研究显示,AM I病人的幸福感得分为(32.74ʃ7.52)分,相比于量表总分48分,处于中等水平,高于潘璐等[22]对冠心病老年人幸福感[(25.94ʃ4.22)分]的调查结果㊂这是因为本次调查对象中,年龄<66岁者占72.89%,不伴有其他慢性病者占73.24%㊂而潘璐等对冠心病老年人幸福感的调查对象中,同时伴有高血压者占32.5%,伴有糖尿病者占29.4%㊂既往研究显示,相对于老年冠心病病人,中青年病人AM I病人冠状动脉病变程度较低且范围较局限,预后更好[23]㊂而同时伴有高血压㊁糖尿病等慢性病的冠心病病人可能因为冠状动脉硬化㊁微血管病变㊁血脂异常等因素加速疾病进展,从而使身心负担加重,幸福感降低[24]㊂因此,医护人员应重点关注患有慢性病的老年冠心病人群的幸福感指数,并且选取合适的干预方法如引导想象放松训练[25]㊁A B C情绪疗法[26]㊁提升该人群的幸福感水平㊂3.1.2基本心理需要满足本次调查对象的基本心理需要满足得分为(112.39ʃ15.33)分,与于海燕等[27]的调查结果一致,相比量表总分147分,处于中等水平㊂本研究结果表明,AM I病人基本心理需要并未得到很好的满足㊂这是因为基本心理需要满足主要包括自主需要㊁关系需要和能力需要,自主需要是指个体根据自己能力和意愿选择活动的需要,关系需要是指个体具有和他人建立良好社交关系的需要,能力需要是指个体具有高效完成目前所经历的活动的需要[28]㊂AM I发病较急㊁发作过程中的濒死感㊁疼痛感较为明显,从而导致病人的能力需要水平降低㊂因此,医护人员应注重对病人开展疾病相关健康宣教,促进病友间相互交流健康管理经验,从而提升病人的自主需要及能力需要㊂3.1.3特质与状态错失恐惧本次调查对象的特质错失恐惧得分为(18.43ʃ6.72)㊃8952㊃C H I N E S EE V I D E N C E-B A S E D N U R S I N GJ u l y,2023V o l.9N o.14Copyright©博看网. All Rights Reserved.分,相比于总分25分,处于中等水平㊁状态错失恐惧得分为(27.47ʃ8.66)分,相比于总分35分,处于中等水平㊂本研究结果表明,AM I病人具有一定错失恐惧㊂这是因为特质与状态错失恐惧是指因担心错过有益的信息或活动,从而希望时刻保持对外界信息及活动的关注[29]㊂随着互联网时代的到来,人们获取信息的渠道越来越多样化,投入社交媒体上的时间也更多㊂而此次调查对象中,中青年㊁已婚㊁与家人同住㊁有子女人群占比较高,在社会中承担的角色较多,对信息的需求较高㊂而AM I发病较急,病人难以短时间内适应疾病状态,即使出院,AM I病人也因长期服药需要持续获取疾病相关信息㊂此次调查对象中,硕士以下人群占92.25%,说明此次调查对象整体学历层次较低,获取信息的能力较弱,更易因担心错过或急于获取疾病相关信息处于焦虑状态㊂因此,医护人员应结合病人的人口学特点,对于中青年㊁已婚㊁学历层次较低等AM I 病人适当提高健康宣教的频次或丰富健康宣教的内容以降低该类病人的特质与状态错失恐惧水平㊂3.2 AM I病人基本心理需要满足与幸福感呈正相关本次调查结果显示,AM I的基本心理需要满足与幸福感呈正相关(P<0.001),此研究结果与其他研究学者的调查结果一致[30]㊂当个体在社会中承担的角色㊁接受的支持更多,就会感受到更高的归属感以及胜任感,从而产生更高的基本需要[31]㊂随着社会压力增加,AM I病人呈现年轻化态势㊂中青年群体是社会的中流砥柱㊂因此也承担更多角色,需求更多㊂当基本心理需要满足状况良好时,将引起病人认知及情感层面的积极变化,从而提升其幸福感水平㊂因此,医护人员可以通过关注病人的心理需要,尊重病人自身兴趣(自主感)如鼓励病人参与治疗方案的制定,增强社会支持(归属感)如家庭干预㊁同伴教育等方式,提高AM I病人的幸福感㊂3.3 AM I病人特质与状态错失恐惧与心理需要满足㊁幸福感之间呈负相关本次调查结果显示,AM I病人特质错失恐惧㊁状态错失恐惧与心理需要满足㊁幸福感呈负相关(P< 0.001),表明高特质与状态错失恐惧会降低病人的心理需要满足感以及幸福感水平㊂这可能因为当前经皮冠状动脉介入术和溶栓治疗是AM I病人主要的治疗手段[32],但是术后AM I病人须接受长期的康复治疗,会对日常生活造成一定影响,使其更渴望了解他人的有益经历并且担心错过工作生活中的有益信息,一旦错过某些重要内容,病人会产生不同程度的焦虑情绪,从而降低其心理满足感及幸福感水平㊂因此,医护人员应重点关注AM I病人心理焦虑程度,采取积极干预手段缓解其因疾病造成其无法正常获取信息而产生的焦虑感,达到改善其心理满足感和增强其幸福感的目的㊂3.4 AM I病人特质与状态错失恐惧的中介效应本研究中介效应分析结果显示,特质错失恐惧和状态错失恐惧均在基本心理需要满足与幸福感之间存在链式中介效应㊂结果表明,基本心理需要可通过状态错失恐惧对幸福感产生影响,与李莉[33]研究结果一致㊂国外学者认为,若个体心理需求满足感缺失会导致自我监管不足从而产生错失焦虑[10]㊂在互联网时代,社交媒体丰富了人们与外界的连接渠道,心理需求尚未得到满足的个体会倾向于借助手机㊁电脑等移动设备寻求外界的帮助与关注㊂AM I病人发病较急,尚未完全适应疾病的状态,除病人的身份外,还承担多种社会角色,需求较多,若基本心理需求得不到满足,无法感受到一定的支持及价值时,可能更加关注外界的信息,并且期待了解他人的看法及有益经历,从而经常下意识地查看自己的社交媒体,渴望外界的肯定,加之长期的康复治疗要求病人对外界的消息保持关注,在追求获取他人信息的同时,个体可能会忽视当下的乐趣,进而处于焦虑状态,降低幸福感㊂因此,医护人员应该关注AM I病人的特质与状态错失恐惧状态,建议采取团体心理辅导㊁线上线下结合的健康宣教㊁延续护理等多种方式尽量满足病人的心理需要,降低病人的特质与状态错失恐惧,从而提升病人的幸福感㊂4小结综上所述,本研究结果表明,特质与状态错失恐惧在AM I病人心理需要满足和幸福感之间有中介作用㊂因此,医护人员应注重病人的相关健康宣教,提升其自主需要及胜任需要,降低他们特质与状态错失恐惧,从而增加其幸福感㊂由于本研究仅调查本院的284例AM I病人,区域单一且不具有代表性㊂今后可扩大样本量,针对不同地区㊁不同级别的医院进行调查研究㊂也会根据此次调查的结果,制定针对性的干预策略,以提高AM I病人的幸福感㊂参考文献:[1]国家心血管病中心.‘中国心血管健康与疾病报告“2020[J].心肺血管病杂志,2021,40(10):1005-1009.[2]何源,徐东杰.‘2021E S C急慢性心力衰竭诊断和治疗指南“中的新机制㊁新研究㊁新推荐[J].心脑血管病防治,2022,22(1):4-7.[3] P O G O S O V A N,S A N E R H,P E D E R S E N SS,e ta l.P s y c h o s o c i a la s p e c t s i n c a r d i a c r e h ab i l i t a t i o n:f r o mt h e o r y t o p r ac t i c e.A p o s i t i o np a p e r f r o m t h e C a r d i a c R e h a b i l i t a t i o n S e c t i o n o ft h e E u r o p e a n㊃9952㊃循证护理2023年7月第9卷第14期(总第106期)Copyright©博看网. All Rights Reserved.A s s o c i a t i o no fC a r d i o v a s c u l a r P r e v e n t i o n a n dR e h a b i l i t a t i o no f t h eE u r o p e a n S o c i e t y o f C a r d i o l o g y[J].E u r o p e a n J o u r n a l o f P r e v e n t i v eC a r d i o l o g y,2015,22(10):1290-1306.[4] D E C IEL,R Y A N R M.T h e"w h a t"a n d"w h y"o f g o a l p u r s u i t s:h u m a n n e e d s a n d t h e s e l f-d e t e r m i n a t i o n o f b e h a v i o r[J].P s y c h o l o g i c a l I n q u i r y,2000,11(4):227-268.[5] D E C I EL,O L A F S E N A H,R Y A NR M.S e l f-d e t e r m i n a t i o n t h e o r y i nw o r ko r g a n i z a t i o n s:t h es t a t e o fas c i e n c e[J].A n n u a l R e v i e w o f O r g a n i z a t i o n a l P s y c h o l o g y a n dO r g a n i z a t i o n a l B e h a v i o r,2017,4:19-43.[6]吴才智,荣硕,朱芳婷,等.基本心理需要及其满足[J].心理科学进展,2018,26(6):1063-1073.[7] S H I MA IS,Y AMAM I Y A Y,F U K U D A S.S u b j e c t i v eh a p p i n e s sa m o n g J a p a n e s ea d u l t s:a nu p w a r dt e n d e n c y a s s o c i a t e d w i t ha g e[J].N i h o nK o s h uE i s e i Z a s s h i,2018,65(9):553-562. [8]余金聪,范纯琍,唐雪梅,等.大学生目标内容与幸福感的关系:基本心理需要满足的中介作用[J].中国健康心理学杂志,2022,30(2):296-301.[9]汤岷岷,王大华,G U E R R I E N A.中法老人基本心理需要满足对心理幸福感的影响:文化普遍性和差异性[J].中国健康心理学杂志, 2021,29(3):327-333.[10] E L HA I J D,Y A N G H B,MO N T A G C.F e a ro f m i s s i n g o u t(F OMO):o v e r v i e w,t h e o r e t i c a l u n d e r p i n n i n g s,a n d l i t e r a t u r er e v i e w o n r e l a t i o n s w i t h s e v e r i t y o f n e g a t i v e a f f e c t i v i t y a n dp r o b l e m a t i c t e c h n o l o g y u s e[J].R e v i s t aB r a s i l e i r aD eP s i q u i a t r i a(S a oP a u l o,B r a z i l:1999),2021,43(2):203-209. [11]李琦,王佳宁,赵思琦,等.基本心理需要对大学生错失焦虑和被动性社交网站使用的影响[J].中国学校卫生,2019,40(7):1088-1090.[12] K UMA R R.C r i t i c a l r e v i e wo f s t u d e n t s'w e l l b e i n g,f e a r o fm i s s i n go u t,a n d s o c i a lm e d i ae n g a g e m e n t f o r l e i s u r e i nh i g h e r e d u c a t i o nl e a r n i n g e n v i r o n m e n t s[J].C u r r e n tP s y c h o l o g y,2019,112(10): 1121-1128.[13]陆再英,钟南山.‘内科学“[M].第7版,北京:人民卫生出版社,2008,798-810.[14]万霞,刘建平.临床研究中的样本量估算:(2)观察性研究[J].中医杂志,2007,48(7):599-601.[15] W E GMA N N E,O B E R S T U,S T O D T B,e ta l.O n l i n e-s p e c i f i cf e a r o fm i s s i ng o u ta n dI n t e r n e t-u s ee x p e c t a n c i e sc o n t r i b u t et os y m p t o m s o f I n t e r n e t-c o mm u n i c a t i o n d i s o r d e r[J].A d d i c t i v eB e h a v i o r sR e p o r t s,2017,5:33-42.[16]肖曼曼,刘爱书.特质状态错失恐惧量表的中文版修订[J].中国临床心理学杂志,2019,27(2):268-272.[17] D E C IE L,R Y A N R M,G A G NÉM,e ta l.N e e ds a t i s f a c t i o n,m o t i v a t i o n,a n dw e l l-b e i n g i n t h ew o r ko r g a n i z a t i o n s o f a f o r m e re a s t e r nb l o c c o u n t r y:a c r o s s-c u l t u r a l s t u d y of s e l f-d e t e r m i n a t i o n[J].P e r s o n a l i t y a n dS o c i a l P s y c h o l o g y B u l l e t i n,2001,27(8):930-942.[18]谢东杰,王利刚,白羽,等.中文版基本心理需要满足量表的修订[J].中华行为医学与脑科学杂志,2012,21(5):465-467.[19] K O Z MA A,S T O N E S M J.T h e m e a s u r e m e n t o f h a p p i n e s s:d e v e l o p m e n t o f t h eM e m o r i a lU n i v e r s i t y o fN e w f o u n d l a n dS c a l eo fH a p p i n e s s(MU N S H)[J].J o u r n a lo f G e r o n t o l o g y,1980,35(6):906-912.[20]刘仁刚,龚耀先.纽芬兰纪念大学幸福度量表的试用[J].中国临床心理学杂志,1999,7(2):107-108.[21]邓稳根,黎小瑜,陈勃,等.国内心理学文献中共同方法偏差检验的现状[J].江西师范大学学报(自然科学版),2018,42(5):447-453.[22]潘璐,张建薇.平静心境在冠心病老年患者自我接纳与幸福感间的调节效应[J].护理学报,2021,28(15):54-59.[23]张承花,贺珊,陈静波,等.中青年冠心病患者危险因素及冠脉病变特点[J].中国卫生工程学,2021,20(6):951-952.[24] C O L L E TJ P,T H I E L E H.L e s s o n l e a r n t f r o mt h e n e w2020E S Cg u i d e l i n e s o n n o n-S T-s e g m e n t e l e v a t i o n a c u t e c o r o n a r ys y n d r o m e:w h e n c l i n i c a l j u d g e m e n t p r e c e d e s a n d o v e r p a s s e sw e a kr e c o mm e n d a t i o n s.2020n o n-S T-s e g m e n t e l e v a t i o na c u t e c o r o n a r ys y n d r o m e g u i d e l i n e s o n p r e-t r e a t m e n t:p r i m u mn o nn o c e r e![J].E u r o p e a nH e a r t J o u r n a l,2021,42(26):2607-2608.[25]李乐,沈玲,李娟,等.引导式想象放松疗法对新生血管性青光眼患者术中配合度及心血管应激反应的影响[J].临床研究,2021, 29(7):161-162.[26]孙月,刘永玲,肖啟,等.A B C合理情绪疗法在社区居民失眠病人中的应用[J].全科护理,2020,18(12):1489-1491. [27]于海燕,李淑梅,郝桂兰,等.中老年冠心病患者心理弹性在基本心理需要满足与主观幸福感间的中介效应[J].职业与健康, 2021,37(11):1510-1514.[28] MÜL L E R F H,T HOMA S A E,C A R M I G N O L A M,e t a l.U n i v e r s i t y s t u d e n t s'b a s i c p s y c h o l o g i c a ln e e d s,m o t i v a t i o n,a n dv i t a l i t y b e f o r e a n dd u r i n g C O V I D-19:a s e l f-d e t e r m i n a t i o n t h e o r ya p p r o a c h[J].F r o n t i e r s i nP s y c h o l o g y,2021,12:775804.[29]王佳悦.中国人人情认知和表征的研究以20至40岁青年为例[D].南京:南京师范大学,2016.[30] L I NL,C HA N H W.T h e a s s o c i a t i o n s b e t w e e nh a p p i n e s sm o t i v e sa n dw e l l-b e i n g i nC h i n a:t h em e d i a t i n g r o l e o f p s yc h o l o g i c a l n e e ds a t i s f a c t i o n a n d f r u s t r a t i o n[J].F r o n t i e r s i nP s y c h o l o g y,2020,11: 2198.[31] G I L-F L R E Z A,L L O R E N S S,A C O S T A-A N T O G N O N I H,e t a l.B a s i c p s y c h o l o g i c a ln e e d sa tw o r k:t h e i rr e l a t i o n s h i p w i t hp s y c h o l o g i c a l w e l l-b e i n g a n d h e a l t h y o r g a n i s a t i o n a l o u t c o m e sw i t h a g e n d e r p e r s p e c t i v e[J].I n t e r n a t i o n a l J o u r n a l o fE n v i r o n m e n t a lR e s e a r c ha n dP u b l i cH e a l t h,2022,19(5):3103.[32]沈卫峰.遵循指南优化急性S T段抬高型心肌梗死临床管理[J].中华心血管病杂志,2019,47(10):762-765.[33]李莉.大学生基本心理需要满足与主观幸福感的关系研究:错失恐惧的中介作用[J].潍坊工程职业学院学报,2018,31(6):38-42.(收稿日期:2022-03-22;修回日期:2023-03-28)(本文编辑贾小越)㊃0062㊃C H I N E S EE V I D E N C E-B A S E D N U R S I N GJ u l y,2023V o l.9N o.14Copyright©博看网. All Rights Reserved.。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

元器件交易网
China Electronics Technology Group Corporation No.26 Research Institute
DIELECTRIC FILTER SPECIFICATION

SIPAT Co., Ltd.
Part Number: BP65R1045S112
1. MODEL NUMBER MODEL NUMBER. BP65R1045S112 CUSTOMER PART NO.
2. TEST CONDITION 2-1 TYPICAL CONDITION : -TEMPERATURE : 20℃ -HUMIDITY : 65%RH
2-2 STANDARD CONDITION : -TEMPERATURE :-40℃ to +85℃ -HUMIDITY : 45%RH to 85%RH
3. COMPOSITION AND MATERIAL NO. 3-1 3-2 3-3 3-4 RESONATOR NUMBER OF POLE IN/OUTPUT TERMINALS GROUND BASE NAME COMPOSITION AND MATERIALS DIELECTRIC MATERIALS 5 POLE Ag or Sn PLATED Ag or Sn PLATED
4. ELECTRICAL SPECIFICATIONS NO. 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 ITEM CENTER FREQUENCY(fo) BAND WIDTH INSERTION LOSS IN BW RIPPLE RETURN LOSS ATTENUATION INPUT POWER NOMINAL CHARACTERISIC IMPEDANCE 1045.0MHz ±56.0MHz 2.0dB max. 1.0dB max. 15dB min. 30dB min. at fo±140MHz 1W 50Ω SPECIFICATIONS
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
BP65R1045S112 2005-9-21 1.0 Page 1/3
Phone: +86-23-62920684
Fax: +86-23-62805284
/ sawmkt@

元器件交易网
China Electronics Technology Group Corporation No.26 Research Institute
DIELECTRIC FILTER SPECIFICATION
5. DIMENSIONS
TOP VIEW
SIPAT Co., Ltd.
Part Number: BP65R1045S112
BP65R1045S112
BOTTOM VIEW
I/0 PORT GROUND TOLERANCE：±0.20 UNIT：mm
6. RECOMMENDED REFLOW PAD
7. REFLOW SOLDERING STANDARD CONDITIONS
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
BP65R1045S112 2005-9-21 1.0 Page 2/3
Phone: +86-23-62920684
Fax: +86-23-62805284
/ sawmkt@

元器件交易网
China Electronics Technology Group Corporation No.26 Research Institute
DIELECTRIC FILTER SPECIFICATION

8.CHARACTERISTICS
SIPAT Co., Ltd.
Part Number: BP65R1045S112
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
BP65R1045S112 2005-9-21 1.0 Page 3/3
Phone: +86-23-62920684
Fax: +86-23-62805284
/ sawmkt@

。