销售合同英文

合集下载

英文销售合同模板3篇

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

英文销售合同模板3篇

英文销售合同模板3篇篇1Sales Contract TemplateThis Sales Contract (the "Contract") is entered into between [Seller Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Sale of GoodsThe Seller agrees to sell, and the Buyer agrees to purchase, the following goods (the "Goods"):Description of Goods: [Description]Quantity: [Quantity]Price: [Price]2. DeliveryThe Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery Address]. The Goods shall be delivered on or before the agreed upon delivery date, which is [Delivery Date].3. PaymentThe Buyer agrees to pay the Seller the total purchase price of [Total Purchase Price] in the following manner:- [Payment Method] in the amount of [Deposit Amount] upon signing of this Contract- [Payment Method] in the amount of [Balance Amount] upon delivery of the Goods4. Title and Risk of LossTitle to the Goods shall pass to the Buyer upon delivery. The risk of loss or damage to the Goods shall pass to the Buyer upon delivery.5. WarrantiesThe Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications as set forth in this Contract.6. Limitation of LiabilityThe Seller shall not be liable for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Seller's Country].In witness whereof, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________________Buyer: ______________________________[Signature][Print Name][Title][Date]篇2Sales Contract TemplateThis Sales Contract ("Contract") is made and entered into as of [date] by and between [Seller], with a principal place ofbusiness at [address] ("Seller"), and [Buyer], with a principal place of business at [address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the "Goods"): [description of goods], in accordance with the terms and conditions of this Contract.2. Quantity and Price: The quantity of Goods to be sold and purchased, as well as the price per unit, shall be as set forth in Exhibit A attached hereto and incorporated herein by reference.3. Payment Terms: Buyer shall pay Seller the total purchase price for the Goods within [number] days of the date of delivery of the Goods. Payment shall be made in [currency] by [method of payment].4. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.5. Inspection and Acceptance: Buyer shall have [number] days from the date of delivery of the Goods to inspect the Goods and notify Seller in writing of any defects or nonconformities.Failure to give such notice shall constitute acceptance of the Goods by Buyer.6. Warranties: Seller warrants that the Goods shall conform to the specifications set forth in this Contract and shall be free from defects in material and workmanship for a period of [number] days from the date of delivery.7. Limitation of Liability: In no event shall either party be liable for any incidental, consequential, or punitive damages arising out of or in connection with this Contract, whether based on warranty, contract, tort, or any other legal theory.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of laws principles.9. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:_____________________________________[Signature]Buyer:_____________________________________[Signature]篇3Sales Contract TemplateThis Sales Contract is entered into on [Date], by and between [Seller's Name], with a business address at [Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with a business address at [Address] (hereinafter referred to as "Buyer").WHEREAS, the Seller is engaged in the business of selling [Products or Services]; andWHEREAS, the Buyer desires to purchase [Products or Services] from the Seller under the terms and conditions set forth herein;NOW, THEREFORE, in consideration of the mutual promises and covenants set forth in this Sales Contract, the parties agree as follows:1. Products or Services: The Seller agrees to sell and deliver to the Buyer the following products or services: [Detailed description of products/services, including quantity, quality, specifications, and delivery date].2. Purchase Price: The purchase price for the products or services shall be [Amount] per [Unit] for a total of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Payment Method] upon delivery of the products or services.3. Delivery: The Seller shall deliver the products or perform the services at the location specified in writing by the Buyer. Delivery shall be made on or before [Delivery Date], unless otherwise agreed upon in writing by the parties.4. Inspection and Acceptance: The Buyer shall have [Number of Days] days after delivery to inspect the products or services and notify the Seller in writing of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products or services shall be deemed accepted.5. Warranties: The Seller warrants that the products or services will conform to the specifications set forth in this Sales Contract. The Seller further warrants that the products are free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery.6. Limitation of Liability: The Seller's liability under this Sales Contract shall be limited to the purchase price paid by the Buyer for the products or services. In no event shall the Seller be liable for any consequential, incidental, or punitive damages.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of [State], without regard to its conflict of laws principles.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________[Signatures of parties][Printed Names of parties]This Sales Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements, understandings, negotiations, and discussions, whether oral or written. This Sales Contract may be amended only by a written instrument executed by both parties.。

销售合同英文版6篇

销售合同英文版6篇篇1Sales ContractThis Sales Contract (the "Contract") is made and entered into on [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods described in Exhibit A (the "Goods").2. Purchase PriceThe purchase price for the Goods shall be [amount] (the "Purchase Price"). Buyer agrees to pay the Purchase Price to Seller in full upon delivery of the Goods.3. DeliverySeller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Any delay in delivery shall entitle Buyer to cancel this Contract.4. Inspection and AcceptanceBuyer shall inspect the Goods promptly upon delivery. Buyer may reject any Goods that are damaged, defective, or not in conformity with the specifications set forth in Exhibit A. Any rejected Goods shall be returned to Seller at Seller's expense.5. Payment TermsBuyer shall pay the Purchase Price to Seller by [payment method] within [number] days of delivery of the Goods. Late payments shall accrue interest at a rate of [percentage] per month.6. WarrantiesSeller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Seller further warrants that the Goods are free and clear of any liens or encumbrances.7. Limitation of LiabilityIn no event shall either party be liable to the other for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract, even if such party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State].9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Buyer:[Signatures]EXHIBIT A[Description of Goods]This Sales Contract is hereby accepted by both parties:Seller: Buyer:[Signatures] [Signatures]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is agreed upon between [Seller Company Name], with its registered office located at [Address], and [Buyer Company Name], with its registered office located at [Address], on [Date].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, quality, and price].2. Payment: The Buyer agrees to pay the Seller the total sum of [Total amount] for the goods as specified in Clause 1. Payment shall be made in [Currency] within [Number of days] days from the date of delivery.3. Delivery: The Seller shall deliver the goods to the Buyer's address as specified in this Contract, within [Number of days] days from the date of signing this Contract unless otherwise agreed upon by both parties.4. Inspection and Acceptance: The Buyer shall inspect the goods upon delivery and shall have [Number of days] days to notify the Seller of any defects or non-conformities. Failure to do so will be deemed as acceptance of the goods.5. Warranties: The Seller warrants that the goods are free from defects in materials and workmanship and are fit for the purpose for which they are intended. The Seller shall remedy any defects or non-conformities at its own expense.6. Indemnity: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising out of the Seller's breach of this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country/State].8. Dispute Resolution: Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration Board].9. Confidentiality: Both parties agree to maintain the confidentiality of all information exchanged in connection with this Contract.10. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Company Name] [Buyer Company Name]By: __________________________ By: __________________________Name: Name:Title: Title:Date: Date:篇3Sales ContractThis Sales Contract (“Contract”) is made and entered into this [date], by and between [Seller name], with its principal place of business at [Seller address] (“Seller”) and [Buyer name], with its principal place of business at [Buyer address] (“Buyer”).WHEREAS, Seller desires to sell and Buyer desires to purchase certain goods on the terms and conditions set forth in this Contract;NOW, THEREFORE, in consideration of the mutual covenants and promises made by the parties hereto, the Seller and Buyer agree as follows:1. Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”):[List of Goods]2. Quantity: The quantity of Goods to be sold and purchased under this Contract shall be as set forth in the Purchase Order agreed upon by the parties.3. Price: The purchase price for the Goods shall be [Price] per unit, for a total purchase price of [Total Price]. Payment shall be made in full upon delivery of the Goods.4. Delivery: The Goods shall be delivered by Seller to Buyer at the following address: [Delivery Address]. Delivery shall be completed on or before the agreed upon delivery date specified in the Purchase Order.5. Inspection and Acceptance: Buyer shall have [number] days after delivery of the Goods to inspect and test the Goods. IfBuyer determines that the Goods are not in conformity with the specifications set forth in this Contract, Buyer shall notify Seller in writing within such [number] day period, and Seller shall be responsible for replacing or repairing the Goods at Seller’s expense.6. Risk of Loss: The risk of loss of the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer at the delivery address specified in this Contract.7. Warranties: Seller warrants that the Goods will conform to the specifications set forth in this Contract and will be free from defects in material and workmanship for a period of [number] days from the date of delivery. Seller’s sole liability and Buyer’s exclusive remedy for breach of this warranty shall be the replacement or repair of the defective Goods.8. Limitation of Liability: In no event shall either party be liable for any consequential, incidental, special or punitive damages, including lost profits, arising out of or related to this Contract.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the state of [state].10. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed by their respective authorized representatives as of the day and year first above written.SELLER: BUYER:________________________ _______________________[Seller Name] [Buyer Name]By: By:Name: Name:Title: Title:篇4Sales ContractThis Sales Contract ("Contract") is entered into on [Date] between [Seller], a company organized and existing under thelaws of [Country], having its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], having its principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit. Buyer shall pay the total purchase price to Seller in accordance with the payment terms set forth in Exhibit B attached hereto.3. Delivery: Seller shall deliver the Goods to Buyer at the location specified in Exhibit A within [Number] days after the date of this Contract. Buyer shall be responsible for all shipping and handling costs related to the delivery of the Goods.4. Inspection and Acceptance: Buyer shall inspect the Goods upon delivery and shall notify Seller of any defects ornon-conformities within [Number] days of delivery. Buyer's failure to notify Seller within the specified time period shall be deemed acceptance of the Goods.5. Warranties: Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of Liability: Seller shall not be liable for any incidental, consequential, or punitive damages arising out of or related to this Contract, whether in contract, tort, or otherwise.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or related to this Contract shall be resolved by arbitration in accordance with the rules of [Arbitration Association].[Remainder of page intentionally left blank; signature page follows.]IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: Buyer:__________________________ _________________________[Signature] [Signature][Name] [Name][Title] [Title]篇5Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Date] by and between [Seller Name], with a mailing address of [Seller Address] ("Seller"), and [Buyer Name], with a mailing address of [Buyer Address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”): [Description of Goods].2. Purchase Price: The total purchase price for the Goods shall be [Purchase Price], which shall be paid in the following manner: [Payment Terms].3. Delivery: Seller agrees to deliver the Goods to Buyer’s address at [Buyer Address] within [Delivery Timeframe]. Time is of the essence with respect to delivery.4. Inspection and Acceptance: Buyer shall have [Inspection Period] days from the delivery of the Goods to inspect and accept or reject the Goods. If Buyer rejects the Goods, Buyer shallpromptly notify Seller in writing with an explanation of the reasons for rejection.5. Warranty: Seller warrants that the Goods will be free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery. If the Goods are defective, Seller shall replace or repair the Goods at no additional cost to Buyer.6. Limitation of Liability: Seller’s liability und er this Contract shall be limited to the purchase price paid by Buyer for the Goods.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral, between the parties.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]____________________ ____________________Seller BuyerDate: ___________________ Date: ___________________This Sales Contract is effective as of the date first written above.篇6Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].1. Sale of GoodsSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"):Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Price per unit]Total Price: [Total price of Goods]2. DeliverySeller shall deliver the Goods to Buyer at the address specified by Buyer on or before [delivery date]. Delivery shall be made by [mode of transportation]. Buyer shall be responsible for any shipping and handling costs associated with the delivery of the Goods.3. PaymentBuyer shall pay Seller the total price of the Goods upon delivery. Payment shall be made in [currency] by [method of payment].4. Inspection and AcceptanceBuyer shall inspect the Goods upon delivery and shall have [number] days to notify Seller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, Buyer shall be deemed to have accepted the Goods.5. WarrantiesSeller warrants that the Goods shall conform to the description provided and shall be free from defects in material and workmanship. Buyer's sole remedy for breach of this warranty shall be the replacement or repair of the defective Goods.6. Limitation of LiabilitySeller shall not be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with the sale or use of the Goods.7. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [country]. Any disputes arising under this Contract shall be resolved through arbitration in [city], in accordance with the rules of [arbitration organization].8. Entire AgreementThis Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller]By:_________________________Name:_______________________Title:_______________________[Buyer]By:_________________________ Name:_______________________ Title:_______________________。

销售合同英文范本5篇

销售合同英文范本5篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: (Please insert detailed product specifications, including product name, model number, quantity, quality, grade, size, color, packaging, etc.)2. Price and Payment:The price of the products shall be as per the list attached to this Contract. The total contract value is to be paid in (specify currency) according to the following schedule:* A deposit of XX% to be paid within XX days of signing this Contract.* The balance to be paid XX days prior to the date of shipment.All payments shall be made through the Buyer's bank account to the Seller's bank account. Details of banks and account numbers shall be communicated by both parties prior to signing this Contract.3. Delivery:The Seller shall deliver the products to the Buyer within XX days from the date of receiving the full payment. The products shall be delivered FOB (Free On Board) at the Seller's warehouse. The risk of loss or damage shall pass to the Buyer upon loading of the products onto the vessel.4. Quality Assurance:The Seller guarantees that all products are of good quality and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within XX days of receipt by the Buyer.5. Warranty:The Seller guarantees that all products are warranted against any defects in material or workmanship for a period of XX months from the date of sale to the Buyer. During this period, any defective products shall be repaired or replaced free of charge as per the Seller's choice.6. Terms and Conditions of Shipment:The terms and conditions of shipment shall be governed by International Trade terms and conditions including Incoterms 20XX. The Seller shall provide necessary shipping documents to facilitate smooth delivery of the products to the Buyer.7. Confidentiality:Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure. This confidentiality clause shall remain valid for a period of XX years from the date of signing this Contract.8. Force Majeure:Neither party shall be liable for any delay or failure in performance due to causes beyond their reasonable control, such as natural disasters, war, political events, etc. In such cases, the affected party shall immediately notify the other party of the situation and its possible consequences.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to (specify court/arbitration institution) for resolution.10. General Clauses:Buyer: _____________________ Date: _________ Signature:_________Seller: _____________________ Date: _________ Signature:_________This Sales Contract is hereby witnessed by:Witness: _____________________ Date: _________ Signature: _________篇2SALES CONTRACT销售合同This Sales Contract is made by and between [Buyer’s Name], having its principal place of business at [Buyer’s Address] (hereinafter referred to as “Buyer”), and [Seller’s Name], havi ng its principal place of business at [Seller’s Address] (hereinafter referred to as “Seller”), on the terms and conditions stipulated below:兹有[买方名称]（以下简称“买方”）与[卖方名称]（以下简称“卖方”）根据以下条款和条件签订此销售合同：Article 1: Product Description and Quantity第一条：产品描述与数量The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity:卖方同意出售，买方同意购买以下商品：[Product details, specifications, quantity, unit price, total value, etc.] （产品细节、规格、数量、单价、总价等）Article 2: Terms of Delivery第二条：交货条款The Seller shall deliver the goods within the time as stipulated in the contract. In case of failure on delivery on time, the Seller shall be held responsible for any loss caused to the Buyer. The risk of goods shall be borne by the Seller until they are delivered on board the vessel nominated by the Buyer. The Seller shall bear all expenses prior to delivery.卖方应在合同规定的时间内交货。

英文销售合同3篇

英文销售合同3篇s both in amount and quantity allowed at the sellers option.6 生产国和制造厂家country of origin and manufacturer7 包装：packing：8 唛头：shipping marks：9 装运期限：time of shipment：10 装运口岸：port of loading：11 目的口岸：port of destination：12 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance：to be effected by buyers for 110% of full invoice value covering _____ up to _____ only.13 付款条件：买方须于_____年_____月_____日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。

信用证议付有效期延至上列装运期后15天在中国到期，该信用证中必须注明允许分运及转运。

payment：by confirmed, irrevocable, transferable and divisible l/c to be available by sight draft to reach the sellers before ___/___/_____ and to remainvalid for ingotiation in china until 15 days after the aforesaid time of shipment. tje l/c must specify that transhipment and partial shipments are allowed.14 单据：documents：15 装运条件：terms of shipment：16 品质与数量、重量的异义与索赔：quality/quantity discrepancy and claim：17 人力不可抗拒因素：由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、防止和克服的其他事件导致不能或暂时不能全部或局部履行本协议，该方不负责任。

销售合同英文版8篇

销售合同英文版8篇篇1SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made and entered into by and between the Seller and the Buyer:Seller:Buyer:in accordance with the principles of mutual respect, equality, and mutual benefit and in consideration of the strength of their respective business capabilities, they agree to conclude this Contract under the following terms and conditions:Article 1: Scope of ContractThis Contract covers the sale of the following commodity: ___________. Any amendment or cancellation of this Contract requires the written consent of both parties.Article 2: Price and Payment TermsThe total price for the contracted goods shall be US$___. The payment terms are as follows: _____.The Seller shall provide a valid VAT invoice upon delivery of the goods.Article 3: DeliveryThe Seller shall deliver the goods within ____ days from the date of signing this Contract. Any delay shall be promptly notified to the Buyer and discussed mutually for a reasonable adjustment.Article 4: Quality Inspection and StandardThe Seller shall ensure that the quality of the goods conforms to the standards specified in this Contract. The Buyer shall have the right to conduct inspection at the Seller's factory before shipment.Article 5: PackagingThe Seller shall use proper packaging materials to ensure safe delivery of the goods to the port specified by the Buyer. All expenses related to packaging shall be borne by the Seller.Article 6: Risk TransferRisk shall be transferred to the Buyer upon delivery of the goods at the port specified in this Contract.Article 7: InsuranceThe Seller shall cover insurance for the goods during transit from their factory to the port specified in this Contract at their own cost.Article 8: Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, war, government intervention, etc., but shall immediately notify the other party of such events and their consequences.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ____ days from the date of delivery for any defects in material or workmanship found in the goods. The Seller shall also provide necessary after-sales service as per Buyer's request during this period.Article 11: Settlement of DisputesArticle 12: Language and LawsThis Contract is executed in both English and ____ languages with equal legal effects. The laws of ____ shall apply to this Contract.In case of any discrepancies between English version and other language version, English version shall prevail for both parties' performance and settlement disputes if any deviation between both versions occurs in relation to contract execution matters.Date: ________Authorized Representative of Seller: _____________________ (Signature)Authorized Representative of Buyer: _____________________ (Signature)Seller's Name (Stamp): _____________________Buyer's Name (Stamp): _____________________篇2SALES CONTRACT1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, specifications, etc.] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the goods is fixed at [Price].2.2 Payment shall be made by the Buyer to the Seller in the following terms:a) A deposit of [Percentage]% of the total contract value shall be paid within [Time frame] after the signing of the contract.b) The balance of [Percentage]% shall be paid against the copy of the shipping documents and the commercial invoice within [Time frame] after the receipt of the goods at the port of destination.3. Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery timeframe].3.2 The Seller shall advise the Buyer of the shipment date and air waybill number at least [Number of days] days prior to shipment.3.3 Delay in delivery beyond the agreed period shall be subject to penalties, with each week's delay resulting in a penalty equal to [Percentage]% of the total contract value for each week of delay.4. Quality and Inspection4.1 The Seller shall ensure that the goods are new, sound, and meet all specifications stated in this contract.4.2 The Buyer shall have the right to conduct a pre-shipment inspection at the Seller's premises or at a mutually agreed location prior to shipment.4.3 If any discrepancies are found during inspection, the Seller shall be responsible for rectifying such discrepancies at no additional cost to the Buyer.5. Risk and Title TransferRisk and title for the goods shall pass to the Buyer upon delivery to the carrier at the point of shipment as evidenced by the shipping documents provided by the Seller to the Buyer.6. Force Majeure7. Warranty and After-Sales Service8. Settlement of Disputes篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity strictly according to the terms and conditions set out in this Contract.2. Commodity and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodity:[Description of the commodity, specifications, quality, quantity, etc.]3. Price and Paymenta. The Price of the commodity shall be fixed as stated in the contract.b. Payment terms: [Terms of payment, e.g., T/T (Telegraphic Transfer), L/C (Letter of Credit), etc.]c. The Buyer shall make payment within [Time limit for payment].d. In case of any discrepancies in quality or quantity, the Seller shall make corresponding deductions from the invoice value.e. All banking charges shall be borne by the Buyer unless otherwise agreed upon by both parties.4. Delivery and Shipmenta. The Seller shall deliver the goods within [Delivery period].b. The Seller shall advise the Buyer of the estimated date of shipment and delivery time of the goods by [Method of notification].c. The Seller shall be responsible for loading and shipping according to the terms agreed in this Contract.d. If there is any delay in shipment due to reasons on the Seller's side, the Seller shall bear all losses incurred to the Buyer thereby.e. The risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods to the carrier at the port of shipment as stipulated in this Contract.f. The Seller shall provide necessary documents for customs clearance at destination port as required by international trade practices or requested by the Buyer.g. The Seller shall ensure that all necessary customs formalities are completed before shipment is made so that risks incurred are covered under Insurance as specified in Article XX.篇4SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made on [Date] between [Seller Full Name] (hereinafter called "the Seller") and [Buyer Full Name] (hereinafter called "the Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity strictly according to the terms and conditions stipulated below:Commodity: ________________Specification: ________________Quantity: ________________Price: ________________2. Terms of Delivery3. Terms of PaymentPayment shall be made by the Buyer to the Seller against the following terms:a) ____% (percentage) of the total contract value to be paid within ________ (number of days) after signing this Contract.b) ____% (percentage) of the total contract value to be paid against presentation of shipping documents, i.e., bill of lading, invoice, certificate of quality and quantity, etc., by ________ (payment date).c) The balance of payment will be made in ________ (payment terms) after arrival of goods at the port of destination and issuance of Final Inspection Certificate by the Buyer. Any delay in payment will be charged at a rate of __% per month from the due date until receipt of full payment.4. Quality & Inspection5. Force Majeure6. Warranty & Liabilities7. Disputes Settlement8. General Terms篇5SALES CONTRACTThis Sales Contract (hereinafter called the "Contract") is made on [date] by and between [Seller's Name] (hereinafter called "Seller"), and [Buyer's Name] (hereinafter called "Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [Detail of the product to be sold]. The quantity, specifications, and layout shall be set out in Annex I to this Contract.2. Price and Payment2.1 The Price of the commodity is fixed at ________ (currency and amount). The Seller shall quote a CIF basis to be stipulated in the order acknowledgement which will constitute an integral part of this Contract.3. Delivery and Shipment4. Insurance篇6SALES CONTRACT1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products: [Product Description, including item number, name, specifications, quantity, etc.]2. Price and Payment2.1 The total sales price for the products shall be [Price Amount] US dollars (USD) ONLY.2.2 Payment shall be made by [Payment Method] only. The Buyer shall make full payment within [Payment Deadline]. The Seller shall provide a valid invoice for the products.3. Delivery and Shipment3.1 Delivery shall be made by [Delivery Method] to the Buyer's designated port/location within [Delivery Timeframe].3.2 The Seller shall notify the Buyer of the estimated delivery date in writing prior to shipment. The risk of loss or damage to the products shall pass to the Buyer upon delivery at theport/location specified by the Buyer.4. Quality Assurance5. Warranty and After-Sales Service6. Intellectual Property Rights7. Confidentiality8. Force Majeure9. Termination10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed upon by both parties in writing.Any prior agreements or understandings between the parties are hereby cancelled and replaced with this Contract.篇7SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached to this Contract. The specific terms related to such products, including quantity, specifications, quality, and pricing, are detailed in Annex A.2. Delivery2.1 The Seller shall ensure timely delivery of the products to the Buyer at the place specified in Annex A.2.2 Any delay in delivery shall be promptly notified to the Buyer and any associated penalties shall be as per the terms stated in this Contract.3. Payment3.1 The Buyer shall make payment for the products as per the payment terms outlined in Annex B attached to this Contract.3.2 In case of any delay in payment, the Buyer shall inform the Seller promptly and pay applicable penalties as per the terms stated in this Contract.4. Quality Assurance4.1 The Seller guarantees that the products shall be of the quality, specifications, and standards agreed upon and as per the applicable laws and regulations.4.2 If any defect or discrepancy is found in the products, the Seller shall promptly replace or rectify such products as per the terms and conditions agreed upon by both parties.5. Warranty and Liability5.1 The Seller provides a warranty for the products as specified in Annex C attached to this Contract.5.2 In case of any breach of contract by the Seller, he shall be liable for any losses incurred by the Buyer as a result of such breach.6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract that is not intended for public disclosure.7. Force Majeure7.1 In case of any event beyond the reasonable control of either party, such as acts of war, terrorism, natural disasters, etc., both parties shall negotiate and agree on an appropriate course of action.8. Termination8.1 This Contract may be terminated by either party giving a written notice to the other party in case of any material breach of contract by the other party.9. General Terms9.1 This Contract constitutes the entire agreement between the parties and no modification shall be made to it except in writing and signed by both parties.9.2 This Contract is made in duplicate, with each party holding one copy, and is executed in the English language. In case of any discrepancies between the meanings of the original language and any translated version, the original language shall prevail.9.3 Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be finally settled under [Name of applicable law/jurisdiction].In witness whereof, the parties have executed this Contract on the dates indicated below:Seller: _________________________ Date: _____________Signature: _________________________Title: _________________________Company Seal (if applicable): _________________________Contact Information: _________________________Email: _________________________ Phone: _____________Address: _________________________City/State/Zip Code: _____________Country: _____________篇8SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity strictly according to the terms and conditions mentioned below.2. Description of the GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods, including model number, specifications, quantity, etc.]3. Price and Payment3.1 Price: The total price for the goods shall be [Total Price] USD, NET. All costs related to packing, shipping, insurance, customs duties, taxes, etc., shall be borne by the Buyer unless otherwise agreed in writing by the Seller.3.2 Payment: The Buyer shall make payment through [Payment method specified, e.g., T/T transfer, L/C, etc.] The details of payment schedule are as follows:* A deposit of [Percentage] upon signing of this Contract.* The balance before shipment against confirmed documents.4. DeliveryThe Seller shall deliver the goods within [Delivery period specified] after receiving the full payment. Any delay in delivery caused by reasons beyond the Seller's control shall be notified to the Buyer in writing immediately upon occurrence.5. Quality and Inspection5.1 Quality: The Seller guarantees that the goods shall be in conformity with the quality specified in this Contract. The Buyershall have the right to inspect the goods during production or before shipment.6. Packing and Shipping Marks7. Risk and Insurance8. Claims9. Force Majeure10. Settlement of DisputesAll notices under this Contract shall be given in writing addressed to both parties。

英文销售合同模板5篇

英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

销售合同英文范本5篇

销售合同英文范本5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date] between [Seller Name], with a registered address at [Seller Address], and [Buyer Name], with a registered address at [Buyer Address] (collectively referred to as the "Parties").1. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods (the "Goods"):- Description of goods:- Quantity:- Price:2. DeliveryThe Seller shall deliver the Goods to the Buyer at the following address: [Delivery Address]. The Goods shall be delivered on or before [Delivery Date].3. PaymentThe Buyer shall pay the Seller the total sum of [Total Amount] for the Goods. The payment shall be made in [Currency] in the following manner:- [Deposit amount] shall be paid upon signing this Contract.- The balance amount shall be paid upon delivery of the Goods.4. Inspection and AcceptanceUpon delivery of the Goods, the Buyer shall inspect the Goods and shall have [Number of Days] days to notify the Seller of any defects or non-conformity. If no notification is made within this period, the Goods shall be deemed accepted by the Buyer.5. WarrantyThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.SELLER BUYER[Signature] [Signature][Print Name] [Print Name]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's Contact Number]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's Contact Number]The Seller and the Buyer shall collectively be referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and deliver the following goods:Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Unit Price of Goods]Total Price: [Total Price of Goods]2. DeliveryThe Seller shall deliver the goods to the Buyer at the following address:Delivery Address: [Delivery Address]Delivery Date: [Delivery Date]3. PaymentThe Buyer shall pay the total price of the goods as follows:- [Payment Method(s)]- [Payment Schedule]- [Total Payment Amount]4. Inspection and AcceptanceThe Buyer shall inspect the goods upon delivery. If the goods are found to be damaged or defective, the Buyer shall notify theSeller within [Number of Days] days of delivery. The Seller shall replace or repair the goods at no additional cost to the Buyer.5. Risk of LossThe risk of loss shall pass to the Buyer upon delivery of the goods to the Buyer's address.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller: [Seller's Signature]Buyer: [Buyer's Signature][Date]篇3Sales Contract TemplateThis Sales Contract is entered into on [date], between [Seller's Name], hereinafter referred to as the "Seller", and [Buyer's Name], hereinafter referred to as the "Buyer".1. Description of GoodsThe Seller agrees to sell to the Buyer the following goods:- Description of goods- Quantity- Price per unit2. DeliveryThe Seller agrees to deliver the goods to the Buyer's specified location on [date]. The Buyer agrees to accept the delivery of the goods according to the terms specified in this contract.3. Price and PaymentThe total price of the goods is [total price]. The Buyer agrees to make payment in full to the Seller by [payment method] on or before the delivery date.4. Inspection and AcceptanceThe Buyer has the right to inspect the goods upon delivery. If the goods do not meet the specifications outlined in this contract, the Buyer has the right to reject the goods and request a refund.5. WarrantyThe Seller warrants that the goods are free from defects in materials and workmanship for a period of [warranty period]. If any defects are discovered during this period, the Seller agrees to repair or replace the goods at no additional cost to the Buyer.6. Limitation of LiabilityThe Seller shall not be liable for any damages resulting from the use or misuse of the goods by the Buyer.7. Governing LawThis contract shall be governed by the laws of[State/Country].8. Entire AgreementThis contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings between the parties.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.Seller: [Seller's Signature]Buyer: [Buyer's Signature]篇4Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address], collectively referred to as the "Parties."1. Sale of Goods1.1 Seller agrees to sell, transfer, and deliver to Buyer the following goods: [Description of Goods] in the quantities and at the prices as described in Exhibit A attached hereto.1.2 Buyer agrees to accept and pay for the goods according to the terms and conditions set forth in this Contract.2. Price and Payment2.1 The total purchase price of the goods shall be [Amount], payable in [currency], in accordance with the payment terms set forth in Exhibit A.2.2 Payment shall be made by [method of payment], with the first installment due on [Date] and subsequent installments due on a [frequency] basis thereafter.3. Delivery3.1 Seller shall deliver the goods to Buyer's premises at [Address] on or before [Date].3.2 If Seller fails to deliver the goods by the agreed-upon delivery date, Buyer may, at its option, cancel the order and receive a full refund of any amounts paid.4. Risk of Loss4.1 The risk of loss of the goods shall pass to Buyer upon delivery of the goods to Buyer's premises.5. Inspection and Acceptance5.1 Buyer shall inspect the goods upon delivery and shall have [number] days to notify Seller in writing of any defects or nonconformities. Failure to provide notice within this timeframe shall constitute acceptance of the goods.5.2 If the goods are found to be defective or nonconforming, Seller shall have the option to repair or replace the goods at no additional cost to Buyer.6. Warranties6.1 Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to any specifications provided by Buyer.6.2 Seller makes no other warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.7. Termination7.1 Either Party may terminate this Contract upon written notice if the other Party fails to perform its obligations under the Contract and such failure continues for a period of [number] days after written notice of the breach.8. Governing Law8.1 This Contract shall be governed by and construed in accordance with the laws of the State of [State].IN WITNESS WHEREOF, the Parties have executed this Sales Contract as of the Effective Date.[Signature of Seller] [Signature of Buyer]__________________________ __________________________[Seller Name] [Buyer Name]Date: ____________________ Date: ____________________篇5Sales ContractThis Sales Contract is entered into on [insert date] by and between [Seller’s Company Name], located at [Seller’s Address], and [Buyer’s Company Name], located at [Buyer’s Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods:– [Description of goods]– Quantity: [Number of units or volume]– Price: [Price per unit or total amount]2. Delivery: The goods will be delivered to Buyer at the address provided by Buyer on or before the agreed-upon delivery date of [insert date]. Delivery will be made by [Seller’spreferred shipping method]. Any additional costs incurred for expedited delivery will be borne by Buyer.3. Payment Terms: Buyer agrees to pay the total amount of [insert total amount] within [number] days of receiving the goods. Payments will be made in [currency] to [Seller’s preferred payment method], unless otherwise agreed upon by both parties.4. Inspection of Goods: Buyer has [number of days] from the date of delivery to inspect the goods. If the goods are found to be defective or not as described, Buyer must notify Seller in writing within this inspection period. Seller will either replace the goods or refund Buyer’s payment.5. Warranty: Seller warrants that the goods are free of defects in material and workmanship and will conform to the specifications agreed upon by both parties. Seller’s liability under this warranty is limited to the replacement or repair of defective goods.6. Governing Law: This Sales Contract shall be governed by the laws of [State/Country] and any disputes arising from the contract shall be resolved in the courts of [State/Country].7. Entire Agreement: This Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of goods and supersedes any previous agreements or understandings, whether written or oral.In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________Signed and sealed in the presence of:Witness: _______________________Date: _______________________This Sales Contract is effective as of the date first above written and shall remain in effect until all obligations under the contract have been fulfilled by both parties.。

国际英文销售合同6篇

国际英文销售合同6篇篇1International Sales ContractThis International Sales Contract ("Contract") is made and entered into on [Date] ("Effective Date") by and between:Seller: [Seller's Name] with its principal place of business at [Seller's Address]Buyer: [Buyer's Name] with its principal place of business at [Buyer's Address]The Seller and Buyer are collectively referred to as the "Parties."WHEREAS, the Seller is engaged in the business of selling [Products/Services]; andWHEREAS, the Buyer desires to purchase [Products/Services] from the Seller.NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the Parties agree as follows:1. Sale of Products/Services:1.1. The Seller agrees to sell, transfer, and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, [Products/Services] in accordance with the terms and conditions set forth in this Contract.2. Price and Payment:2.1. The price of the [Products/Services] shall be [Price], payable in [Currency], in [Payment Terms].2.2. Payment shall be made in [Payment Method] to the Seller within [Number] days from the date of the invoice.3. Delivery:3.1. The Seller shall deliver the [Products/Services] to the Buyer at [Delivery Address] on or before the delivery date specified in the Contract.3.2. The Seller shall be responsible for all shipping and handling costs associated with the delivery of the [Products/Services].4. Warranties:4.1. The Seller warrants that the [Products/Services] shall conform to the specifications agreed upon by the Parties and shall be free from defects in materials and workmanship.4.2. The Seller further warrants that it has the right to sell the [Products/Services] to the Buyer and that the [Products/Services] do not infringe upon any intellectual property rights of third parties.5. Liability:5.1. The Seller shall not be liable for any indirect, incidental, or consequential damages arising from the sale of the [Products/Services].5.2. The maximum liability of the Seller under this Contract shall not exceed the total purchase price of the[Products/Services].6. Governing Law:6.1. This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].6.2. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the Effective Date.SELLER:_____________________________[Seller's Name]_____________________________[Seller's Title]BUYER:_____________________________[Buyer's Name]_____________________________[Buyer's Title]篇2International English Sales ContractThis International Sales Contract (hereinafter referred to as “Contract”) is made and entered into on [Date] by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as "Buyer").Whereas, Seller desires to sell the goods specified in Schedule A (hereinafter referred to as "Goods") to Buyer, and Buyer desires to purchase the Goods.Now, therefore, in consideration of the premises and mutual covenants contained herein, the parties hereto agree as follows:1. Seller agrees to sell and Buyer agrees to purchase the Goods in accordance with the terms and conditions set forth in this Contract.2. Price and Payment2.1 The price of the Goods shall be [Amount] per unit. The total purchase price for the Goods shall be [Total Amount].2.2 The payment shall be made by [Payment Method], in [Currency], within [Number] days after the delivery of the Goods.3. Delivery3.1 The Goods shall be delivered by Seller to Buyer at [Delivery Location] on or before [Delivery Date].3.2 The risk of loss and damage to the Goods shall pass from Seller to Buyer upon delivery.4. Inspection and Acceptance4.1 Buyer shall inspect the Goods upon delivery and shall notify Seller in writing of any non-conformities or defects within [Number] days.4.2 Buyer shall be deemed to have accepted the Goods if no notice of non-conformities or defects is given within the specified time.5. Warranties5.1 Seller warrants that the Goods shall conform to the specifications set forth in Schedule A.5.2 Buyer’s sole remedy for any breach of warranty shall be the replacement of the non-conforming Goods or a refund of the purchase price.6. Governing Law and Dispute Resolution6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties.6.3 If the dispute cannot be resolved amicably, it shall be submitted to arbitration in accordance with the rules of [Arbitration Institution].7. Miscellaneous7.1 This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral.7.2 This Contract may be amended or modified only in writing signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]________________________________[Buyer]________________________________Schedule A – List of Goods[Description of Goods][Quantity][Price per unit]篇3International English Sales ContractThis International English Sales Contract ("Contract") is made and entered into on this ___________ day of __________, 20__, by and between:The Seller:Name: [Seller’s Name]Address: [Seller’s Address]Email: [Seller’s Email Address]Phone: [Seller’s Contact Number]And The Buyer:Name: [Buyer’s Name]Address: [Buyer’s Address]Email: [Buyer’s Email Address]Phone: [Buyer’s Contact Number]The Seller and the Buyer, hereinafter referred to as the “Parties”, agree to the following terms and conditions:1. Product Details:The Seller agrees to sell and deliver the following products to the Buyer:- Description of Products: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Delivery Date]2. Payment Terms:The Buyer agrees to pay the Seller the total amount of [Total Amount] for the products as stated above. Payment must be made in [Currency] through [Payment Method] within [Number] days of signing this Contract.3. Delivery:The Seller shall deliver the products to the Buyer on or before the agreed Delivery Date. The Buyer shall bear all costs associated with the delivery of the products.4. Quality Assurance:The Seller guarantees that the products delivered shall meet the quality standards as specified in this Contract. If the productsdo not meet the quality standards, the Buyer has the right to reject the products and request a replacement or refund.5. Title and Risk of Loss:Title and risk of loss for the products shall transfer from the Seller to the Buyer upon delivery of the products to the Buyer.6. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution:Any dispute arising out of or in connection with this Contract shall be resolved through amicable negotiations between the Parties. If a resolution cannot be reached, the dispute shall be referred to arbitration in [City], [Country] in accordance with the rules of [Arbitration Institution].8. Confidentiality:The Parties agree to keep all information disclosed under this Contract confidential and not disclose it to any third party without the other Party’s consent.9. Entire Agreement:This Contract constitutes the entire agreement between the Parties concerning the sale and purchase of the products and supersedes all prior agreements and understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract as of the date first above written.Seller: __________________________________Buyer: __________________________________Signature: ________________________________Signature: ________________________________Print Name: _______________________________Print Name: _______________________________This International English Sales Contract is hereby accepted and agreed upon by the Parties as of the date first written above.【Please note that this is a sample International English Sales Contract. It is recommended to seek legal advice when drafting a sales contract for your specific needs with a professional attorney or legal advisor】.篇4International English Sales ContractThis International Sales Contract ("Contract") is entered into on [Date] between [Seller], with its principal place of business at [Address] and [Buyer], with its principal place of business at [Address].Article 1: Subject MatterThe subject matter of this Contract is the sale of [Product/Service] by the Seller to the Buyer. The specifications of the Product/Service are detailed in Exhibit A attached hereto.Article 2: Purchase PriceThe purchase price for the Product/Service shall be [Amount] to be paid by the Buyer to the Seller in [Currency]. The payment terms are detailed in Exhibit B attached hereto.Article 3: DeliveryThe Seller shall deliver the Product/Service to the Buyer at [Delivery Location] by [Delivery Date]. The delivery terms and conditions are detailed in Exhibit C attached hereto.Article 4: Inspection and AcceptanceUpon delivery of the Product/Service, the Buyer shall have [Number] days to inspect and test the Product/Service. If theBuyer finds any defects or non-conformities, the Buyer shall notify the Seller in writing within the inspection period.Article 5: WarrantiesThe Seller warrants that the Product/Service shall conform to the specifications set forth in Exhibit A. The Seller further warrants that the Product/Service is free from defects in materials and workmanship.Article 6: Limitation of LiabilityThe Seller's liability under this Contract shall be limited to the purchase price of the Product/Service. The Seller shall not be liable for any indirect, special, or consequential damages.Article 7: Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any dispute arising out of or in connection with this Contract shall be resolved through arbitration in [Arbitration Location].In witness whereof, the parties hereto have executed this Contract as of the date first written above.[Seller]By:______________________Title:____________________Date:____________________[Buyer]By:______________________Title:____________________Date:____________________Exhibit A: Product/Service SpecificationsExhibit B: Payment TermsExhibit C: Delivery Terms and Conditions篇5International English Sales ContractThis International English Sales Contract ("Contract") is entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as the "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as the "Buyer").WHEREAS, Seller is engaged in the business of manufacturing and distributing [Products] and Buyer desires to purchase [Products] from Seller; andWHEREAS, Seller and Buyer desire to enter into a contract setting forth the terms and conditions of the sale of [Products];NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Product Description: Seller agrees to sell and Buyer agrees to purchase the following products: [Description of Products]. The quantity, quality, and price of the products shall be as set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Price and Payment: The price of the products shall be as specified in Exhibit A. Payment shall be made in [Currency] within [Number] days of the date of the invoice.3. Delivery: Seller shall deliver the products to Buyer at the location specified in Exhibit A. Delivery shall be made within [Number] days of receipt of payment.4. Inspection and Acceptance: Buyer shall have [Number] days from the date of delivery to inspect the products and notifySeller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, the products shall be deemed accepted.5. Warranty: Seller warrants that the products shall conform to the specifications set forth in Exhibit A. Seller further warrants that the products shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery.6. Indemnification: Seller agrees to indemnify, defend, and hold harmless Buyer from and against any and all claims, damages, losses, liabilities, and expenses arising out of any breach of this Contract by Seller.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the products and supersedes all prior agreements, understandings, and representations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Exhibit A - Product Description and Terms[Detailed description of products, quantity, quality, price, delivery terms, etc.]篇6International English Sales ContractThis International Sales Contract (the "Contract") is made and entered into on this ___ day of ___, 20__, by and between___________ (the "Seller"), a company organized and existing under the laws of ___________ with its principal place of business located at ___________ and ___________ (the "Buyer"), a company organized and existing under the laws of ___________ with its principal place of business located at ___________.WHEREAS, the Seller desires to sell and the Buyer desires to purchase certain goods (the "Goods") in accordance with the terms and conditions set forth in this Contract; andWHEREAS, the Seller and the Buyer intend to create a legally binding agreement regarding the sale and purchase of the Goods;NOW, THEREFORE, in consideration of the mutual covenants and conditions contained in this Contract, the parties agree as follows:1. Subject MatterThe Seller agrees to sell and the Buyer agrees to purchase the Goods in accordance with the terms and conditions set forth in this Contract.2. Purchase PriceThe Purchase Price for the Goods shall be ___________ per unit, payable in ___________ according to the payment terms set forth in this Contract.3. DeliveryThe Goods shall be delivered to the Buyer at ___________ by ___________ (the "Delivery Date"). The Seller shall bear all shipping costs and risks of loss or damage to the Goods until they are delivered to the Buyer.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the Goods upon delivery and shall have ___________ days from the delivery date to notify the Seller of any defects or non-conformities. Failure togive notice within this time frame shall constitute acceptance of the Goods.5. WarrantiesThe Seller warrants that the Goods shall conform to the specifications and descriptions provided by the Seller and shall be free from defects in material and workmanship.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of ___________. Any disputes arising under this Contract shall be resolved through arbitration in___________.IN WITNESS WHEREOF, the parties hereto have executed this International Sales Contract as of the date first above written.Seller:_________________________Buyer:_________________________。

销售合同英文范本7篇

销售合同英文范本7篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the goods listed below to the Buyer on the terms and conditions stated below:1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products with specific details such as item name, quantity, specifications, unit price, total value, etc.]2. Terms of Payment:2.1 The total value of the contract shall be paid in full by the Buyer to the Seller through [specify payment method such aswire transfer, credit card, etc.] within [specify timeframe such as 30 days of signing the contract].2.2 In case of delayed payment, the Buyer shall pay a penalty to the Seller equal to [specify percentage] of the total contract value for each week of delay.3. Delivery:3.1 The Seller shall deliver the products to the Buyer at the agreed place of delivery within [specify timeframe such as 30 days] from the date of receipt of payment.3.2 Any delay in delivery not caused by Force Majeure shall be considered a breach of contract.4. Quality Assurance:The Seller guarantees that the products are new and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within [specify timeframe such as 3 months] from the date of delivery.5. Ownership and Risk Transfer:Ownership and risk of loss or damage to the products shall pass to the Buyer upon delivery at the agreed place of delivery.6. Warranty:The Seller provides a warranty for the products covering any manufacturing defects for a period of [specify duration such as 1 year] from the date of delivery. During this period, the Seller shall replace or repair any defective products free of charge.7. Force Majeure:If performance of this contract is prevented, restricted or delayed due to Force Majeure circumstances, the Seller shall notify the Buyer promptly and take appropriate measures to ensure prompt performance under such circumstances.8. Confidentiality:Both parties shall keep confidential all information related to this contract that is not intended for public disclosure.9. Disputes Resolution:Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institute or court] for arbitration or legal action.10. Miscellaneous:This contract constitutes the entire agreement between the Buyer and the Seller and supersedes any prior agreements orunderstandings, whether oral or written, regarding the subject matter of this contract. No modifications to this contract shall be binding unless made in writing and signed by both parties. This contract shall be governed by and construed in accordance with the laws of [specify country].IN WITNESS WHEREOF, the parties have executed this contract in [specify place] on [specify date].Buyer Signature: _____________________________________Date: _____________________Seller Signature: _____________________________________Date: _____________________Note: This Sales Contract template is for reference only and should be customized according to specific needs and circumstances. It is recommended to have legal professionals review any legal document before its execution.篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: [Name of Seller]Party B: [Name of Buyer]1. Scope of Contract:This Contract stipulates the terms and conditions for the sale and purchase of the following products: [Product Description, Quantity, Quality, Specifications, etc.] (hereinafter referred to as "Products"). The parties agree to strictly adhere to the terms and conditions set out below.2. Product Description:[Description of the product to be sold, including specifications, quality standards, quantity, etc.]3. Price and Payment:3.1 The total price for the Products shall be [Price in agreed currency].3.2 Payment terms: [Specify payment terms such as T/T in advance, L/C, D/P, etc.]3.3 Any changes to the price or payment terms must be mutually agreed upon in writing.4. Delivery and Shipment:4.1 Delivery Date: [Specify delivery date].4.2 Delivery Location: [Specify delivery location].4.3 Shipping Documents: [Specify required shipping documents].4.4 Risks and responsibilities for the Products shall pass to Party B upon delivery. Any delay in delivery shall be mutually discussed and resolved in writing.5. Quality and Inspection:5.1 Party A shall ensure that the Products comply with the agreed quality standards.5.2 Party B shall have the right to inspect the Products before delivery to ensure quality compliance.5.3 If any defects are found during inspection, Party A shall be responsible for rectifying or replacing the Products as per the agreed terms.6. Force Majeure:In case of any force majeure events such as natural disasters, war, strikes, government policies, etc., which hinder the performance of this Contract, the affected party shall notify the other party in writing within a reasonable period of time and take measures to mitigate the effects of such events. The period of performance may be extended accordingly.7. Warranty:Party A shall provide a warranty for the Products as per the terms and conditions agreed upon by both parties. Any defects in the Products shall be rectified or replaced as per the warranty terms.8. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract and its execution, except for any information that is in the public domain or required to be disclosed by law or regulatory authorities.9. Dispute Resolution:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institution or court] forarbitration/settlement in accordance with [specify applicable laws]. The arbitration award shall be final and binding on both parties.10. Termination:This Contract may be terminated by either party in the event of a breach by the other party which is not rectified within a reasonable period of time. Termination shall be notified to the other party in writing with reasonable grounds for termination stated. The provisions of this Contract which by their nature would survive termination shall remain in full force and effect after termination.篇3SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller," whereby the Buyer agrees to purchase from the Seller and the Seller agrees to sell to the Buyer the under mentioned commodity subject to the terms and conditions stipulated below:兹有买方[买方名称]与卖方[卖方名称]（以下简称“卖方”）订立本合同，买方同意向卖方购买，卖方同意出售以下列条款规定的商品：Article 1: Commodity商品The commodity to be delivered under this Contract shall be as follows: [商品名称、规格、数量及价格等详细信息]。

英文版销售合同8篇

英文版销售合同8篇篇1Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").1. Product and QuantityThe Seller agrees to sell, and the Buyer agrees to purchase the following product in the specified quantity:[Product Description, Specifications, Quantity, and Price List]2. Terms of Payment2.1 The total contract value is [Total Contract Value]. The Buyer shall make payment in full before the delivery of the products.2.2 Payment shall be made through [Bank Name], in [Currency of Payment]. The Seller shall provide the necessary banking information for payment.3. Delivery and Shipping3.1 The Seller shall deliver the products to the Buyer at the shipping address provided by the Buyer.3.2 The delivery shall be made within [Delivery Period] from the date of signing this Contract.3.3 Shipping costs shall be borne by the Buyer unless otherwise agreed upon by both parties.4. Quality and Inspection4.1 The Seller guarantees that the products shall be in accordance with the specifications mentioned in this Contract.4.2 The Buyer has the right to conduct inspections during production and upon receipt of the products. If any discrepancies are found, the Seller shall immediately replace or rectify the products at no additional cost to the Buyer.5. Force Majeure6. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This confidentiality obligation shall continue even after the termination of this Contract.7. Warranty and After-Sales Service8. TerminationEither party may terminate this Contract in case of material breach by the other party, which is not rectified within a reasonable period of time. Termination shall be made in writing and confirmed by both parties.9. Dispute Resolution10. MiscellaneousIn witness whereof, the parties have signed this Contract on the dates indicated below:Seller: _____________________ Date: ________________Buyer: _____________________ Date: ________________(Note: This contract template is general in nature and should be customized according to specific circumstances and legal requirements.)希望这份英文版销售合同能满足您的需求。

销售合同英文版7篇

销售合同英文版7篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of the goods, including their specifications, quantity, and other relevant details].2. Price and Payment2.1 The total price for the goods shall be [Total Price in figures and words]. The price includes all costs related to packaging, transportation, insurance, and customs duties.2.2 Payment shall be made as follows: [Details of payment terms, including down payment, balance payment, and due dates].3. Delivery3.1 The Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address].3.2 The delivery shall be made within [Delivery timeframe] from the date of this Contract.4. Quality and Inspection4.1 The Seller guarantees that the goods shall be of good quality and shall comply with all applicable standards and specifications.4.2 The Buyer shall have the right to inspect the goods during production and prior to delivery.5. Risk and Ownership5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery.5.2 Ownership of the goods shall pass to the Buyer upon full payment by the Buyer.6. Warranty and售后保障The Seller shall provide a warranty for the goods for a period of [Warranty Period] from the date of delivery. During this period, any defects in material or workmanship shall be rectified by the Seller at its own cost.7. Force MajeureThe Seller shall not be liable for any delay in delivery due to force majeure events beyond its reasonable control.8. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of breach by the other party. In such case, the non-breaching party shall be entitled to claim compensation for any losses incurred.10. DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly consultation between the parties. If no settlement can be reached, the dispute shall besubmitted to [Place of arbitration] for arbitration in accordance with its rules.篇2SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made and concluded on [Date] between [Company Name] (hereinafter called "the Seller"), and [Company Name] (hereinafter called "the Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of the goods, including model number, specifications, quantity, and any other relevant details].2. Price and Payment2.1 The total price for the goods shall be [Total Price in Numbers and Currency] (ex-works price).2.2 Payment terms: [Specify payment terms, such as T/T (Telegraphic Transfer), L/C (Letter of Credit), etc.]2.3 The Buyer shall make the payment within [Time limit for payment].3. Delivery3.1 The Seller shall deliver the goods to the port specified by the Buyer within [Delivery timeframe].3.2 Any delay in delivery shall be notified to the Buyer in writing at least [Number of days] days prior to the agreed delivery date.4. Quality Assurance4.1 The Seller guarantees that the goods shall be of the best quality and shall conform to the specifications mentioned in Annexure A (Attached Quality Standards).4.2 In case of any defect in quality or specifications, the Seller shall replace the goods or refund the cost, at its option.5. Risk and Title Transfer5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the port specified by the Buyer.5.2 Title to the goods shall be transferred to the Buyer upon full payment by the Buyer.6. Warranty and After-Sales Service6.1 The Seller shall provide a warranty period of [Warranty Period in Months] months from the date of delivery for any manufacturing defects in the goods.6.2 The Seller shall provide after-sales service as specified in Annexure B (After-Sales Service Agreement).7. Force MajeureIn case of force majeure events, such as war, riots, natural disasters, etc., which hinder or prevent performance of this Contract, the Seller shall notify the Buyer immediately and both parties shall discuss and agree on a solution accordingly.8. TerminationThis Contract may be terminated by either party giving a written notice to the other party in case of fundamental breach by either party. The non-breaching party shall be entitled to compensation for any losses incurred due to such breach.9. Disputes ResolutionAny dispute arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, either party may submit such dispute to [Arbitration institution] for arbitration inaccordance with its arbitration rules and procedures. The arbitration award shall be final and binding on both parties.10. General TermsThe parties have signed this Contract in two counterparts, each party retaining one counterpart for their records.Buyer: _____________________ Date: _____________Seller: _____________________ Date: _____________附件A: 商品规格与质量标准附件B: 售后服务协议（根据实际合同内容填写）请注意本合同仅为示例并非专业法律意见。

英文版销售合同范本6篇

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer's Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods including item number, name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Origin of Goods].Article 3: Price and PaymentThe total price of the goods shall be [Total Price]. The payment shall be made in [Currency] through [Payment Method] within [Payment Period].Article 4: Terms of DeliveryThe delivery of the goods shall be made by [Delivery Method] at the port of [Port of Delivery]. The risk of loss or damage shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods before and after delivery. If any defects are found, the Seller shall promptly rectify or replace the goods.Article 6: Packing and MarkingThe goods shall be properly packed and marked in accordance with the usual practices for transportation. The Seller shall bear all costs related to packing and marking.Article 7: Delay and Force MajeureArticle 8: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [Warranty Period] for the goods. During this period, any defects in material or workmanship shall be rectified by the Seller without additional charge to the Buyer. The Seller shall also provide after-sales service as agreed upon by both parties.Article 9: DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Dispute Resolution Mechanism] for arbitration or legal proceedings.Article 10: General ProvisionsIn witness whereof, the Seller and the Buyer have signed this contract at [Place] on [Date].Seller: _________________________ (Company Name & Signature)Buyer: _________________________ (Buyer's Name & Signature)Date: _________________________Place: _________________________(Note: This is a template Sales Contract and should be used as a reference only. It is recommended to consult with legal professionals for advice on specific terms and conditions.)篇2SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the goods specified in Annex A (Product Description and Quantity) to this Contract.2. Price and Payment2.1 The Price of the goods shall be as stated in Annex A. The Price shall be paid in the currency specified in Annex B (Payment Terms).2.2 Payment terms are specified in Annex B and shall be strictly adhered to by both parties.3. Delivery and Quality Assurance3.1 Delivery of the goods shall be made according to the terms specified in Annex C (Delivery Terms).3.2 The Seller guarantees that the goods shall be of the quality as described in Annex D (Quality Assurance) and shall comply with all applicable laws and regulations in the country of destination.4. Terms of Delivery and Risk Transfer4.1 The risk of loss or damage to the goods shall pass to the Buyer upon delivery as specified in Annex C.5. Warranty and After-Sales Service5.1 The Seller shall provide a warranty for the goods as specified in Annex E (Warranty and After-Sales Service).6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract, except for information that is already in the public domain or obtained through lawful means.7. Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, war, riots, or other events beyond their reasonable control.8. Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party that is not cured within a reasonable period of time.9. Dispute Resolution9.1 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If no settlement can be reached, the dispute shall befinally settled by arbitration in accordance with the rules of [Arbitration Institution].10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.10.2 This Contract is written in both English and [other language(s)], with the English version prevailing in case of any discrepancies.10.3 The laws of [Country] shall apply to this Contract.In Witness Whereof, the parties have executed this Contract in duplicate originals, each party retaining one original for their records.Seller: ____________________ (Authorized Representative)Date: ________Buyer: ____________________ (Authorized Representative)Date: ________篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and concluded on __ DATE __ between Seller: __NAME OF SELLER__ (hereinafter referred to as "Seller") and Buyer:__NAME OF BUYER__ (hereinafter referred to as "Buyer").1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the following products (hereinafter referred to as "Products"): __PRODUCT DESCRIPTION AND SPECIFICATIONS__.2. Terms of Payment2.1 The total contract value is __CONTRACT VALUE__. The Buyer shall make payment through __PAYMENT METHOD__.2.2 The payment terms are as follows:* A deposit of __PERCENTAGE OF DEPOSIT__ is to be paid within __TIME FRAME__ after signing this Contract.* The balance of the payment shall be made upon the delivery of Products and acceptance by the Buyer.3. Delivery and Shipping3.1 The Products shall be delivered to the Buyer at__SHIPPING ADDRESS__.3.2 The delivery date is __DELIVERY DATE__. The Seller shall inform the Buyer promptly if there is any delay in delivery.4. Quality Assurance4.1 The Seller guarantees that the Products shall be in conformity with the following specifications and quality standards: __PRODUCT SPECIFICATIONS AND QUALITY STANDARDS__.4.2 If the Products fail to meet the specified quality standards, the Buyer shall have the right to reject the Products or claim compensation.5. Warranty and After-Sales Service5.1 The Seller provides a warranty period of __WARRANTY PERIOD__ for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge.5.2 The Seller shall provide after-sales service in accordance with the terms and conditions agreed upon by both parties.6. Risks and Liabilities6.1 Risk of loss or damage to the Products passes to the Buyer upon delivery. However, if the Products are lost or damaged during transportation, the Seller shall be responsible for making good the loss or damage.6.2 Neither party shall be liable for any failure to perform its obligations due to force majeure events, such as natural disasters, wars, riots, etc.7. Confidentiality7.1 Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. Settlement of Disputes8.1 Any disputes arising from or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute may be submitted to arbitration at __ARBITRATION PLACE__ in accordance with __ARBITRATION RULES__.9. Force of Law and Jurisdiction9.1 This Contract shall be governed by and construed in accordance with the laws of __COUNTRIES/JURISDICTIONS__.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.10.2 This Contract is made in __NUMBER OF COPIES__ copies, each copy having equal legal effect.10.3 If any provision of this Contract is invalid or unenforceable, it shall not affect the validity and enforceability of the remaining provisions.The parties have read and understood all the terms and conditions stated above and have signed this Contract in witness thereof:Seller:Name: __NAME OF SELLER__Signature: ________________________Date: __DATE__Buyer:Name: __NAME OF BUYER__Signature: ________________________Date: __DATE__篇4SALES CONTRACTThis Sales Contract is made on [合同生效日期] by and between [卖方全称及注册地址], a legal entity duly organized under the laws of [卖方所在国家名称], hereinafter referred to as "Seller" and [买方全称及注册地址], a legal entity duly organized under the laws of [买方所在国家名称], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [商品名称及规格] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the commodity shall be fixed at [商品定价].2.2 Payment shall be made by [支付方式，例如：T/T电汇，L/C信用证等]. Details are as follows: [支付细节及时间表].3. DeliveryThe Seller shall deliver the goods to the port of [交货港口] no later than [最晚交货日期].4. Quality and Inspection4.2 The Buyer shall have the right to conductinspection/supervision of the goods during production process at Seller's factory at any time after receiving a written request from Seller. Details of such inspection shall be agreed mutually by both parties.5. Risk and Transfer of OwnershipThe risk of loss or damage to the goods shall be borne by the Seller until delivery of the goods to the port of destination specified in Article 3 above, at which point ownership shall pass to the Buyer.6. Packing and Shipping Marks7. Insurance8. Warranty and Claims篇5SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and Buyer shall be identified as per the signatures at the end of this Contract.Article 2: Product DescriptionThe Product to be sold is [describe the product clearly]. Additionally, any relevant specifications, dimensions, or other necessary information must be stated clearly in this section.Article 3: Quantity and Unit PriceThe Seller agrees to sell and the Buyer agrees to purchase [quantity] of the Product, with a unit price of [unit price].Article 4: Terms of Payment4.1 Payment shall be made within [specify the time period,e.g., 30 days] after the date of receipt of invoice.4.2 The mode of payment shall be [specify the mode, e.g., T/T (Telegraphic Transfer) or L/C (Letter of Credit)].4.3 In case of L/C, the Buyer shall open an irrevocable L/C in favor of the Seller.Article 5: Delivery5.1 The Product shall be delivered at [delivery location].5.2 The delivery shall be made within [specify the time period].5.3 Any delay in delivery shall be notified to the Buyer in advance.Article 6: Quality AssuranceThe Seller guarantees that the Product shall be in accordance with the specifications mentioned in Article 2 and shall be free from any defects in material and workmanship.Article 7: WarrantyThe Seller provides a warranty for the Product as follows: [describe the warranty terms].Article 8: Force MajeureIn case of force majeure events, both parties shall be relieved from their obligations under this Contract to the extent of such events.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: LiabilitiesIn case of any breach of Contract by either party, the other party shall have the right to claim damages.Article 11: DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify the court or arbitration institution] for resolution.Article 12: Miscellanea篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer Name] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products, including name, specifications, quantity, and agreed-upon unit price].2. Terms of PaymentPayment shall be made in advance by [Method of Payment] (e.g., wire transfer, credit card, etc.) within [Time Limit] from the date of the Contract. A copy of the bank receipt as evidence of payment shall be promptly sent to the Seller after payment.3. Delivery and ShippingThe Seller shall deliver the products to the Buyer at the agreed quantity and quality within [Delivery Timeframe]. Shipping shall be arranged by the Buyer at the Buyer's cost. Any delay in delivery due to reasons beyond the Seller's control shall be promptly notified to the Buyer.4. Quality AssuranceThe Seller guarantees that the products shall be in accordance with the agreed specifications and free from any defects in material and workmanship. Should any defects be found, the Seller shall promptly replace or repair such products at no additional cost to the Buyer.5. Warranty and Liabilities6. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, earthquakes, floods, fires, etc. Should such events occur, the affected party shall promptly notify the other party of the situation and its impact on performance.7. ConfidentialityBoth parties shall maintain confidentiality of any information related to this Contract that is not intended for public disclosure. Such information includes business secrets, technical data, pricing, and other confidential matters agreed upon by both parties.8. TerminationThis Contract may be terminated by either party in case of default by the other party that cannot be rectified within areasonable period of time. Any termination must be notified to the other party in writing and shall be effective upon receipt of such notification.9. Law and Jurisdiction10. Miscellaneous。

外贸销售合同英文版7篇

外贸销售合同英文版7篇篇1Foreign Trade Sales ContractContract Number: [Insert Contract Number]Date of Contract: [Insert Date]Seller:Name of Company: [Insert Seller’s Company Name] Address: [Insert Seller’s Address]Country: [Insert Seller’s Country]Buyer:Name of Company: [Insert Buyer’s Company Name] Address: [Insert Buyer’s Address]Country: [Insert Buyer’s Country]In consideration of the mutual promises and conditions set forth below, the Seller and the Buyer agree to enter into this Foreign Trade Sales Contract:Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the following products: [Insert detailed list of products, including product name, specifications, quantity, and unit price].Article 2: DeliveryThe Seller shall deliver the products to the Buyer at the following location: [Insert delivery location]. The delivery date shall be no later than [Insert delivery date].Article 3: PaymentThe Buyer shall make payment in full via [Insert agreed payment method (e.g., T/T transfer, L/C, etc.)]. Payment terms shall be as follows: [Insert payment terms (e.g., 30% advance, balance against delivery, etc.)].Article 4: Quality and InspectionThe Seller shall ensure that the products are of the agreed quality. The Buyer shall have the right to conduct inspectionsupon receipt of the products. If any defects are found, the Seller shall be responsible for rectifying or replacing the products.Article 5: Force MajeureArticle 6: WarrantyThe Seller guarantees that the products are free from any defects in material and workmanship and agrees to replace or repair any defective products, at its option, within a period of [Insert warranty period] from the date of delivery to the Buyer.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall survive the termination of this Contract.Article 8: Liability for Breach of ContractIf any party fails to perform its obligations under this Contract, the non-breaching party may claim compensation for any losses incurred. If such breach is fundamental, thenon-breaching party may terminate this Contract.Article 9: Law and JurisdictionArticle 10: MiscellaneousIN WITNESS WHEREOF, the Seller and the Buyer have signed this Contract in [Insert number] counterparts, each party retaining one counterpart.Seller: _____________________ Date: _________________(Signature of Seller) (Date of Signature)Buyer: _____________________ Date: _________________(Signature of Buyer) (Date of Signature)Note: This is a legal document and should be reviewed by legal counsel before execution. The above terms are subject to negotiation and may be modified as per the parties’ agreement.篇2合同编号：__________甲方（卖方）：____________________地址：_____________________________乙方（买方）：____________________地址：_____________________________鉴于甲方同意向乙方销售以下商品，乙方同意按照本合同规定的条款和条件购买该商品，双方经友好协商，达成如下协议：一、商品描述1. 商品名称：____________________2. 型号/规格：____________________3. 数量：____________________4. 单价：____________________5. 总价：____________________6. 付款方式：____________________7. 交货期限：____________________8. 交货方式：____________________9. 运输方式：____________________10. 目的地：____________________二、商品质量保证1. 甲方保证所销售的商品均为正品，并符合合同规定的规格和质量要求。

销售合同英文版5篇

销售合同英文版5篇全文共5篇示例，供读者参考篇1Sales ContractThis Agreement is made on this [date] day of [month, year], between [Vendor Company], hereinafter referred to as the "Seller" and [Buyer Company], hereinafter referred to as the "Buyer."1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [detailed description of goods, including quantity, quality, and any specifications]. The goods shall be delivered to the Buyer at [delivery address] on or before [delivery date].2. Price: The price for the goods shall be [amount] per [unit of measurement]. The total purchase price shall be [total amount]. Payment shall be made by the Buyer in [payment method] on or before [payment due date].3. Delivery: The Seller shall deliver the goods to the Buyer at the agreed-upon delivery address on or before the delivery date.The Buyer shall be responsible for any shipping or transportation costs associated with the delivery of the goods.4. Acceptance: The Buyer shall inspect the goods upon delivery and shall have [number of days] days to notify the Seller of any defects or non-conformity. Failure to notify the Seller within this time frame shall constitute acceptance of the goods.5. Warranty: The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery. If any defects are discovered within this period, the Seller shall replace or repair the goods at no additional cost to the Buyer.6. Governing Law: This Agreement shall be governed by the laws of [jurisdiction]. Any disputes arising under this Agreement shall be resolved through arbitration in [city, state].7. Entire Agreement: This Agreement constitutes the entire understanding between the parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Agreement as of the date first above written.Seller: ________________________Buyer: ________________________Signed and sealed in the presence of:Witness: ________________________篇2Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of Goods: The Seller agrees to sell, transfer, and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of Goods: [insert description]- Quantity: [insert quantity]- Price: [insert price]2. Delivery: The Seller shall deliver the Goods to the Buyer's designated location at the Buyer's expense. The Goods shall be delivered in good condition and in accordance with the specifications set forth in this Contract.3. Payment: The Buyer shall pay the Seller the total purchase price of the Goods, as set forth in this Contract, in [currency] within [number] days of the delivery of the Goods. Payment shall be made by [payment method].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Buyer determines that the Goods are not in conformity with the specifications set forth in this Contract, the Buyer may reject the Goods and the Seller shall promptly replace the Goods at no additional cost to the Buyer.5. Warranties: The Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications set forth in this Contract. The Seller further warrants that the Goods are fit for the purpose for which they are intended.6. Limitation of Liability: The Seller's liability under this Contract shall be limited to the purchase price of the Goods. In no event shall the Seller be liable for any incidental, consequential, or punitive damages.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire Agreement: This Contract constitutes the entire agreement between the Seller and the Buyer with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: [Name]Buyer: [Name]__________________________________________________________Signature of SellerSignature of Buyer【以上是关于销售合同的英文版文档，供参考】篇3Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller], with a registered address at [Seller's Address], and [Buyer], with a registered address at [Buyer's Address], on [Date].1. Sale of Goods1.1 Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price2.1 The purchase price for the Goods shall be [Amount] (the "Purchase Price"), payable by Buyer to Seller in [Currency] within [Number] days of the delivery of the Goods.3. Delivery3.1 Seller shall deliver the Goods to Buyer at the location specified in Exhibit B on or before [Date]. Buyer shall be responsible for all shipping costs associated with the delivery of the Goods.4. Inspection and Acceptance4.1 Buyer shall have [Number] days from the date of delivery to inspect the Goods. If the Goods do not conform to the specifications set forth in Exhibit A, Buyer may reject the Goods by providing written notice to Seller within such [Number]-day period.5. Warranties5.1 Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship.6. Limitation of Liability6.1 Seller's liability under this Contract shall be limited to the Purchase Price of the Goods.7. Governing Law7.1 This Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Dispute Resolution8.1 Any dispute arising out of or relating to this Contract shall be resolved through arbitration in accordance with the rules of the American Arbitration Association.9. Entire Agreement9.1 This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller] [Buyer]Signature:___________________ Signature:__________________Print Name:___________________ Print Name:_________________Title:________________________ Title:_____________________Exhibit A - Description of Goods[Description of Goods]Exhibit B - Delivery Location[Delivery Location]篇4Sales ContractThis Sales Contract is made and entered into on this ___ day of ____, 20__ by and between [Seller's Name], with a registered address at [Seller's Address], and [Buyer's Name], with a registered address at [Buyer's Address].1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of the products- Quantity- Price per unit2. Delivery: The Seller shall deliver the products to the Buyer at [Delivery Address] on or before [Delivery Date]. The Buyer shall be responsible for any additional delivery costs.3. Payment: The Buyer shall pay the Seller the total amount of [Total Amount] upon delivery of the products. Payment shall be made in [Currency] via [Payment Method].4. Warranty: The Seller warrants that the products sold under this contract are free from defects in materials and workmanship. Any defects must be reported to the Seller within 30 days of delivery, and the Seller shall replace or repair the defective products.5. Risk of Loss: The risk of loss or damage to the products shall pass to the Buyer upon delivery of the products.6. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Dispute Resolution: Any disputes arising out of or in connection with this Sales Contract shall be resolved through arbitration conducted in [City, State/Country], in accordance with the rules of [Arbitration Association].8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.[Seller's Signature] [Buyer's Signature][Seller's Name] [Buyer's Name]篇5Sales ContractThis Sales Contract (“Contract”) is entered into on [date] by and between [Seller], with its principal place of business at [address] (“Seller”), and [Buyer], with its principal place of business at [address] (“Buyer”).Witnesseth:1. Sale of Goods: Seller agrees to sell, transfer and deliver to Buyer, and Buyer agrees to purchase and receive from Seller, the goods described in Exhibit A attached hereto (the “Goods”).2. Price and Payment: The purchase price for the Goods shall be [amount] per unit, for a total purchase price of [total amount].Buyer shall pay Seller the total purchase price upon signing this Contract.3. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Seller shall bear all costs and expenses related to the delivery of the Goods to Buyer.4. Warranty: Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery. In the event the Goods do not conform to the specifications or are defective, Buyer may return the Goods to Seller for a full refund.5. Inspection and Acceptance: Buyer shall have [inspection period] days from the date of delivery to inspect the Goods and determine whether they conform to the specifications. If Buyer finds any defects or non-conformities, Buyer shall notify Seller in writing within the inspection period. If Buyer does not notify Seller within the inspection period, Buyer shall be deemed to have accepted the Goods.6. Force Majeure: Neither party shall be liable for any delay or failure to perform its obligations under this Contract due to circumstances beyond its reasonable control, such as strikes, riots, acts of God, or government regulations.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first written above.[Signature of Seller] [Signature of Buyer]Name: Name:Title: Title:Date: Date:。

英文版销售合同范本6篇

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which shall be in accordance with the specifications and standards attached. The quantity of the products shall be as stated in Annex A.2. Price and PaymentThe total contract price for the products listed in Annex A shall be [Contract Price] USD. The payment terms are as follows:* A down payment of [Percentage] percent of the total contract price shall be paid within [Deposit Payment Days] days after the signing of this contract.* The balance of the contract price shall be paid against the delivery of the products, confirmed by the Seller, within [Payment Days] days after shipment.All payments shall be made through [Bank Name], in favor of the Seller.3. Delivery and ShipmentThe products shall be delivered FOB (Free On Board) at [Port Name], with transportation arranged by the Buyer. The estimated time of arrival at the port is [Estimated Arrival]. Any delay due to factors beyond the Seller's control should be notified to the Buyer in writing promptly upon occurrence.4. Quality Assurance and WarrantyThe Seller guarantees that the products are new, of high quality, and comply with all applicable specifications and standards. The Seller shall provide a warranty period of [Warranty Period] from the date of delivery, during which any defects in material or workmanship will be rectified promptly by the Seller.5. Terms of ContractThis contract is valid for both parties and cannot be terminated without mutual consent. The Seller and the Buyer shall ensure compliance with all terms and conditions stated herein. If either party breaches this contract, the other party may seek legal remedies.6. Force MajeureNeither party shall be liable for failure to perform its obligations under this contract due to force majeure events, such as natural disasters, wars, riots, or other unforeseeable events beyond their control. The affected party shall notify the other party promptly upon occurrence of such events.7. DisputesAny disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Court/Arbitration Tribunal] for resolution.8. MiscellaneousThis contract is made in both English and [Local Language], with equal validity. In case of any discrepancies between the two versions, the English version shall prevail. This contractconstitutes the entire agreement between the Seller and the Buyer on the subject matter hereof, and no modification shall be made except in writing and signed by both parties.In witness whereof, the Seller and the Buyer have executed this Sales Contract in duplicate originals, with each party retaining one original for their respective records.Seller: _____________________ (Authorized Representative)Date: _____Buyer: _____________________ (Authorized Representative)Date: _____(Note: This is a template only and should be customized according to specific requirements and circumstances.)（附件A：产品列表和规格）（附件B：其他相关条款和细则）篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country],hereinafter referred to as "Seller" and [Buyer's Name], a legal entity registered in [Buyer's Country], hereinafter referred to as "Buyer".1. ProductsThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached hereto, including but not limited to their specifications, quantities, and pricing.2. Delivery2.1 The Seller shall deliver the products to the address specified by the Buyer in the order confirmed by both parties.2.2 The delivery shall be made within [Delivery Period] from the date of signing this Contract.3. Payment3.1 The payment shall be made through the terms agreed by both parties, such as T/T (telegraphic transfer), L/C (letter of credit), etc.3.2 The Buyer shall make the payment within [Payment Period] after the signing of this Contract.4. Quality and QuantityThe Seller shall ensure that the quality and quantity of the products delivered are in accordance with the terms and conditions agreed in this Contract and Annex A.5. Warranty and Returns5.1 The Seller guarantees that the products are new, comply with all applicable specifications, are free from defects in material and workmanship, and conform to any other agreed standards.5.2 In case of any defects in quality or non-conformity with the Contract, the Buyer shall have the right to return the products and claim compensation for any losses incurred.6. Force MajeureIn case of force majeure events, such as natural disasters, wars, political unrests, etc., which prevent either party from fulfilling its contractual obligations, the affected party shall notify the other party immediately and both parties shall discuss and determine the necessary measures to be taken.7. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. TerminationThis Contract may be terminated by either party in case of breach of any of its terms by the other party, provided that such termination is notified to the latter in writing within [Notification Period] from the date of awareness of such breach.9. Jurisdiction and DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, either party may submit such disputes to [Court Name or Arbitrator] for resolution.10. Miscellaneous篇3Sales ContractThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: ______________________Address: ______________________Country: ______________________Seller:Name: ______________________Address: ______________________Country: ______________________Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the products specified in this Contract. The details of the products are as follows:* Product Name: ______________________* Quantity: ________________ (Units)* Quality/Specification: In accordance with the attached specifications sheet.* Price: USD ____ per unit, total value of the contract USD _______________.* Place of Origin: ________________ (Country/Region)* Delivery Date: ________________ (Date)Article 2: Terms of DeliveryThe products shall be delivered FOB (Free On Board) at the port of ________________ (Port Name) on the agreed delivery date. The risk of loss or damage shall be transferred to the Buyer upon loading of the products onto the vessel.Article 3: Terms of PaymentPayment shall be made by T/T (Telegraphic Transfer) to the Seller's account within 30 days after the signing of this Contract. The Seller shall provide necessary documents for customs clearance.Article 4: Quality & InspectionThe Seller shall ensure that the products are in accordance with the agreed specifications and free from any defects. The Buyer shall have the right to conduct inspections at the loading port. If any discrepancies are found, the Seller shall rectify them promptly.Article 5: Force MajeureIf either party is prevented from performing its obligations due to force majeure events, such as natural disasters, wars, riots, etc., the affected party shall notify the other party immediatelyand take reasonable measures to minimize the impact. Neither party shall be liable for damages caused by force majeure events.Article 6: Warranty & After-Sales ServiceThe Seller shall provide a one-year warranty for the products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge. The Seller shall also provide necessary after-sales service support.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract, including but not limited to product specifications, pricing, and business strategies. Such information shall not be disclosed to any third party without the prior consent of both parties.Article 8: TerminationThis Contract may be terminated by either party in case of fundamental breach by the other party. In such case, thenon-breaching party shall have the right to claim compensation for any losses incurred. Termination shall be subject to mutual agreement and confirmed in writing.Article 9: Dispute ResolutionAny disputes arising from or in connection with this Contract shall be settled through friendly negotiations. If no settlement can be reached, such disputes shall be submitted to arbitration at ________________ (Arbitration Institution) in accordance with its arbitration rules. The arbitration award shall be final and binding on both parties.Article 10: Miscellaneous篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller") and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual consultation and in accordance with the principles of integrity and fairness, agree to enter into this Sales Contract with respect to the sale of the products listed below.Article 1: Product Description1.1 The Seller shall sell and the Buyer shall purchase the products specified in the attached Product List, which forms an integral part of this Contract.Article 2: Price and Payment2.1 The total price for the products listed in the Product List shall be as stated in the List, inclusive of all applicable taxes and charges.2.2 Payment shall be made through [specify payment method] in accordance with the payment schedule agreed upon by both parties.Article 3: Delivery3.1 The Seller shall ensure timely delivery of the products to the Buyer's designated location.3.2 Any delay in delivery shall be notified to the Buyer in advance, with reasons provided.Article 4: Quality Assurance4.1 The Seller guarantees that the products sold to the Buyer are genuine and meet all applicable quality standards.4.2 In case of any defect or discrepancy, the Seller shall replace the products or provide a refund, as per the terms agreed by both parties.Article 5: Warranty and After-Sales Service5.1 The Seller shall provide a warranty period for the products, details of which are specified in the Product List.5.2 The Seller shall provide after-sales service as per the terms and conditions specified in this Contract.Article 6: Force Majeure6.1 In case of force majeure events, either party may be relieved from liability for failure to perform its obligations under this Contract, provided that such failure is caused by reasons beyond its control.Article 7: Confidentiality7.1 Both parties shall maintain confidentiality of all information related to this Contract, unless otherwise agreed or required by law.Article 8: Termination8.1 This Contract may be terminated by either party giving a written notice to the other, subject to mutual agreement and compliance with all outstanding obligations.Article 9: Disputes9.1 Any dispute arising out of or in connection with this Contract shall be resolved through friendly consultation between both parties. If no settlement can be reached, the dispute shall be referred to [specify arbitration institution] for arbitration.Article 10: Miscellaneous10.1 This Contract is made in both English and [specify other language if necessary], both versions being equally authentic.10.2 This Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the sale of the products listed in the Product List. No modifications shall be made to this Contract unless agreed by both parties in writing.10.3 This Contract shall be governed by and construed in accordance with the laws of [specify applicablecountry/jurisdiction].IN WITNESS WHEREOF, the parties have signed this Contract in duplicate, each party retaining one duplicate for their records.篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are specified in Appendix A attached to this Contract.(b) The items, specifications, quantity, and price of the goods/products are agreed upon by both parties.2. Delivery(a) The Seller shall deliver the goods/products to the Buyer at the place specified in Appendix A.(b) The delivery schedule is stated in Appendix A, and any delay should be mutually agreed in writing.(c) The risk of loss or damage to the goods/products shall pass to the Buyer upon delivery.3. Terms of Payment(a) The payment for the goods/products shall be made in accordance with the terms stated in Appendix B.(b) Any delay in payment shall be subject to a late payment fee or interest, as mutually agreed upon.4. Quality Assurance(a) The Seller guarantees that the goods/products are new and comply with the specifications stated in Appendix A.(b) In case of any defect in quality or specifications, the Buyer shall have the right to reject the goods/products or claim compensation, as per mutually agreed terms.5. Warranty and After-Sales Service(a) The Seller provides a warranty period of [specify period] from the date of delivery for any manufacturing defects in the goods/products.(b) During the warranty period, the Seller shall, at its own expense, repair or replace any defective goods/products.(c) After the warranty period, the Seller shall provideafter-sales service as per mutually agreed terms.6. Force MajeureIn case of any delay or failure in performance due to acts of God, war, riots, civil commotion, strikes, governmental orders or any other causes beyond the control of either party, neither party shall be deemed to be in default hereunder.7. ConfidentialityBoth parties shall keep confidential all information, including but not limited to trade secrets, business practices, and other proprietary information, disclosed during the execution of this Contract.8. DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, the dispute may be submitted to [specify court/arbitration institution] for resolution.9. General ProvisionsThis Contract constitutes the entire agreement between the parties on the subject matter hereof and may not be modifiedexcept by written agreement signed by both parties. This Contract shall be governed by and construed in accordance with the laws of [specify country].This Contract is made in [specify language] and [specify number of copies] copies of this Contract shall be made, each party holding one copy.For Seller:[Seller's Name][Seller's Signature]Date: _____________For Buyer:[Buyer's Name][Buyer's Signature]Date: _____________Appendix A: Detailed List of Goods/Products and Terms of DeliveryAppendix B: Terms of Payment and Related DetailsNote: This contract template is for reference only and should be customized according to specific requirements andcircumstances before use. It is advisable to have legal professionals review any contract before signing.篇6Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the goods specified in this Contract under the terms and conditions set out below.(b) The items, specifications, quality, quantity, packaging, and other related details of the goods are listed in Annex A.2. Price and Payment(a) The total contract price for the goods shall be [Contract Price] USD, which is fixed and firm.(b) Payment shall be made as follows:1. A deposit of [Deposit Percentage]% (percent) of the total contract price shall be paid within [Deposit Payment Days] days upon signing of this Contract.2. The balance of [Balance Payment]% shall be paid against the presentation of the original Bill of Lading and other shipping documents specified in Clause 9.(c) All banking fees, transfer fees, and other related costs shall be borne by the Buyer unless otherwise agreed by both parties.3. Delivery(a) The goods shall be delivered FOB (Free On Board) [Port of Origin] within [Delivery Period] after receipt of the deposit.(b) Any delay in delivery due to reasons beyond the Seller's control shall be notified immediately to the Buyer.4. Quality and Inspection(a) The Seller shall ensure that the quality of the goods conforms to the specifications mentioned in Annex A.(b) The Buyer shall have the right to conduct inspections at the Seller's premises or at any other place agreed upon during production or pre-shipment stages.5. Claims and Returns(a) If the goods are found to be defective or not in conformity with the Contract specifications, the Buyer shall notify the Seller immediately and have the right to return the goods for a replacement or refund.(b) All costs related to claims and returns shall be borne by the Seller unless otherwise agreed by both parties.6. Force MajeureNeither party shall be liable for any delay or failure in performance due to unforeseen events or circumstances beyond their reasonable control, such as natural disasters, government policies, wars, riots, etc.7. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. TerminationThis Contract may be terminated by either party in case of material breach by the other party that is not rectified within a reasonable period of time.9. Miscellaneous(a) This Contract is made in both English and [Other Language], with the English version prevailing in case of any discrepancies.(b) Any amendments or modifications to this Contract must be made in writing and agreed by both parties.(c) All disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.(d) This Contract is effective from the date of signing by both parties and shall remain valid until fully performed or terminated as stated above.(e) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.(f) The laws of [Applicable Law Jurisdiction] shall apply to this Contract.In witness whereof, the parties have signed this Contract in _________ .For the Seller:Name: _________________________Title: _________________________Date: _________________________Signature: _________________________For the Buyer:Name: _________________________Title: _________________________Date: _________________________Signature: _________________________。

销售合同英文

英文销售合同模板3篇

英文销售合同模板3篇

销售合同英文版6篇

最新英文销售合同模板6篇

销售合同英文范本5篇

英文销售合同3篇

销售合同英文版8篇

英文销售合同模板5篇

英文版销售合同范本8篇

英文版销售合同样本5篇

销售合同英文范本5篇

国际英文销售合同6篇

销售合同英文范本7篇

英文版销售合同8篇

销售合同英文版7篇

英文版销售合同范本6篇

外贸销售合同英文版7篇

销售合同英文版5篇

英文版销售合同范本6篇