华为Hcna_单臂路由实验(简易版)_Tony

相关主题

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

1.路由器R的配置

u t m

Info: Current terminal monitor is off.

system-view （进入全局配置模式）Enter system view, return user view with Ctrl+Z. [Huawei]

[Huawei]sy

[Huawei]sysname R

[R]

[R]int

[R]interface g

[R]interface GigabitEthernet 0/0/0.10

[R-GigabitEthernet0/0/0.10]

[R-GigabitEthernet0/0/0.10]do

[R-GigabitEthernet0/0/0.10]dot1q t

[R-GigabitEthernet0/0/0.10]dot1q termination v [R-GigabitEthernet0/0/0.10]dot1q termination vid 10

[R-GigabitEthernet0/0/0.10]

[R-GigabitEthernet0/0/0.10]ip add 192.168.1.254 24 [R-GigabitEthernet0/0/0.10]

[R-GigabitEthernet0/0/0.10]arp ?

broadcast ARP broadcast enable

learning ARP learning

[R-GigabitEthernet0/0/0.10]arp b

[R-GigabitEthernet0/0/0.10]arp broadcast e

[R-GigabitEthernet0/0/0.10]arp broadcast enable [R-GigabitEthernet0/0/0.10]

[R-GigabitEthernet0/0/0.10]dis this

[V200R003C00]

interface GigabitEthernet0/0/0.10

dot1q termination vid 10

ip address 192.168.1.254 255.255.255.0

arp broadcast enable

return

[R-GigabitEthernet0/0/0.10]

[R-GigabitEthernet0/0/0.10]q

[R]

[R]int

[R]interface g

[R]interface GigabitEthernet 0/0/0.20

[R-GigabitEthernet0/0/0.20]

[R-GigabitEthernet0/0/0.20]do

[R-GigabitEthernet0/0/0.20]dot1q t

[R-GigabitEthernet0/0/0.20]dot1q termination v [R-GigabitEthernet0/0/0.20]dot1q termination vid 20 [R-GigabitEthernet0/0/0.20]

[R-GigabitEthernet0/0/0.20]ip add 192.168.2.254 24 [R-GigabitEthernet0/0/0.20]

[R-GigabitEthernet0/0/0.20]ar

[R-GigabitEthernet0/0/0.20]arp b

[R-GigabitEthernet0/0/0.20]arp broadcast e

[R-GigabitEthernet0/0/0.20]arp broadcast enable [R-GigabitEthernet0/0/0.20]

[R-GigabitEthernet0/0/0.20]dis this

[V200R003C00]

interface GigabitEthernet0/0/0.20

dot1q termination vid 20

ip address 192.168.2.254 255.255.255.0

arp broadcast enable

return

[R-GigabitEthernet0/0/0.20]

[R-GigabitEthernet0/0/0.20]q

[R]

[R]q

dis ip int br

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 4

The number of interface that is DOWN in Physical is 2

The number of interface that is UP in Protocol is 3

The number of interface that is DOWN in Protocol is 3

Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 unassigned up down GigabitEthernet0/0/0.10 192.168.1.254/24 up up GigabitEthernet0/0/0.20 192.168.2.254/24 up up GigabitEthernet0/0/1 unassigned down down GigabitEthernet0/0/2 unassigned down down

NULL0 unassigned up up(s)

The current configuration will be written to the device.

Are you sure to continue? (y/n)[n]:y

It will take several minutes to save configuration file, please wait..........

Configuration file had been saved successfully

Note: The configuration file will take effect after being activated

---------------------------------------------------------------------------------------------------------------------------------