英语验货报告样板
验货报告范本(英文版)
Pre-shipment Inspection Report Service Number: Summary SectionProductNameTrolley BagItemnumberN/AP/OnumberN/AQuantity 1185 piecesClientname。
Suppliername。
Inspectiondate2008-10-18Arrivaltime09:30Departuretime18:00Inspection location QUANZHOU,FUJIAN, ChinaInspector David WangNingbo IntegrityINT’LSERVICE CO.,LTDCategory Conform CommentQuantity YesProduct description / style / color No please refer to special attention Point #1, #2,Workmanship NoTesting/ checking YesData measurement YesPackaging YesShipping mark YesInspection Standard: ANSI/ASQZ1.4 (MIL-STD-105E) DEFECTSCritical Major Minor Sampling plan: Single, Normal AQL 0.0 2.5 4.0Inspection Level: II Defects Found: 0 9 13QuantityProduct description / style / colorspecificationCheck against sample submitted by client:Discrepancy was found on inspection samples, please refer to Special Attention point # 1 & #2.WorkmanshipDefectives ListDefectivesListDefectivesCRI MAJ MIN PictureDescription0 0 8Wrinkle markon fabricDirty stains 0 0 5DefectivesListDefectives ListDefectivesDescriptionCRI MAJ MIN PictureHandle standslant ( can beused)0 9 0TESTING /CHECKINGFunction test on handle, wheel, zip and Velcro.Performed on all seletced samples, the result was passed.Function checking for Velcro tape/zip Performed all selected samples, the result was acceptablePull test at handle strap by hand normal force Performed on S-3 samples, the result was passed.Adhesive test by tapes Performed on S-3 samples, Noprinting peel off, the result waspassedSize measure performed on 5 pcs samples,result is below measurement table.Internal Check performed on 5 pcs samples,Discrepancy was found oninspection samples, please refer toSpecial Attention point # 1 & # 2.(Page 2).Mass productions Approved sampleGap locationCarton Drop Test from 76cmheight, drop 10 times at 1 corner, 3edges and 6 faces.Performed on 3 cartons, the resultwas passedDATA MEASUREMENTSize MeasurementItems Spec.(cm)Samples1 2 3 4 5Product size (L * W * H) N/A 36 * 26.5* 4036 * 26.5* 4036 * 26.5* 4036 * 26.5* 4036 * 26.5* 40Side pocket23*25 23*24.5 23*24.5 23*24.5 23*24.5 23*24.5 Logo printing(L * W)N/A 11 * 2.6 11 * 2.6 11 * 2.6 11 * 2.6 11 * 2.6PE boardthickness onbottom and backpart4.0mm 4.0mm 4.0mm 4.0mm 4.0mm 4.0mmPE boardthickness around3 sides3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mmGross Weight ofexport cartonN/A 5.0 KGS 5.1 KGS 5.2 KGS 5.0 KGS 5.0 KGSSize of Export carton N/A 39 * 32 *44cm39 * 32 *44cm39 * 32 *44cm39 * 32 *44cm39 * 32 *44cmPackagingUnit packingEach product was packed into anindividual poly bag ,sealed onopeningOuter packing Carton size: 39 * 32 * 44cm1 pc with an instruction sheet packed ina carton which fixed by 1 nylon strap.Shipping markShipping MarkFront mark Side markOther markingBar code label on CartonPrinting logo on bag Other PicturesSewn label Sewn label (back)Instruction sheet Bottom viewString on zipper puller Compare with approved sample (rightside one)CartonsTotal cartons Inspected cartons。
英文验货报告
3. WORKMANSHIP APPEARANCE / FUNCTION INSPECTION FINDINGS:
------Sampling standard ISO 2859-1 (Mil Std 105E) ------Sample Size: 200PCS AQL II, Critical 0; Major 1.5; Minor 4.0
57*52.5*39.5*cm/15.862KG 16*20*29.5cm/1.435kg
Parameter date H03VVH2-F,2*0.75mm² GM-07,250V~2A -TH2 AC250V,15A 17AM030A5 0.1μFk,275V,MPX-X2 T110 JY-102M Y2 T85 FLD-E5430,220-240V,50/60HZ,150W, CLASSF 3321 22AWG,600V,150℃ Gift box size Supply cord length Manufacturer or logo GOMENTECH GOMENTECH TAIHENG SENSATA TECHNOLOGIES Dain JEC DM FT2 WOER
Gift box is dirty
Attachment
Page 5 of 17
Guangzhou Fulida electrical appliance Co, Ltd
Add: Room 1,NO3 EAST dongfeng Road tanbu Town Huadu Area,Guangzhou PR China
Page 9 of 17
Guangzhou Fulida electrical appliance Co, Ltd
PASSED PASSED PASSED PASSED PASSED PASSED PASSED PASSED PASSED PASSED 27.5*26*19cm
出货检验报告中英文模板
环保要求
是否符合ROHS标准：
ROHS compliance Is in line with the ROHS standard
检验结果（Inspection result）：
□合格PASS
备注（remark）
核准 （approval）：
□ 是（YES ） 确认（check）：
□不合格FAIL
□ 否（NO）
客户 Customer: 出货数量 Shipping Qty : ENA条码
ENA Barcode：
正唛（Main mark）：
客户唛头信息 The customer shipping
mark information
出货检验报告
Outgoing inspection rep
品名
料号
Description : 抽样数
检验 员
□特采MRB
ห้องสมุดไป่ตู้
彩盒内部产品、配件及内部包材摆放是否正 确 graphic carton put internal products, accessories and packaging are correct
□ 抽检 spot check
不良数 defect quantity
贴纸/说明书 stickers/
specification
包装辅材 Packaging material and auxiliary material
纸卡、珍珠棉、PE袋、泡壳等，外观及尺寸 是否符合规格要求 Paper card, pearl cotton, PE bag, blister Package,and so forth, the appearance and size is in accordance with the specification requirements
英文版验货报告
外贸QC检验验货中英文报告
报告号：report NO.产品名称:product name.客户:client.供应商:supplier.订单号:order number.订单数量:order quantity.产品规格:product standard.验货日期:Inpection date 从： 年 月 日 年 月 日123459101112验货/QC Signature：AC/REMI=0.65AC/RE要求检验步骤、项目/Request inspection procedures and projects 缺陷说明/defect explainAQ-QF-QC0001严重缺陷serious defects 主要缺陷/Major defects 次要缺陷/Minordefct判定OK判定NG公司内部填写：interior fillout品质部意见：quality view签名：autograph：业务部意见：sales department签名：autograph：处理结果：dispose result□通过/PASS □需改善/improve□通不过/NO Pass厂商负责人/Person in charge：数量不对/quantity wrong 可靠性试验/reliability test缺陷合计/Total amount of defects 外观检查/appearance inspection特性测试/characteristic test 包装不符/variation in packing 尺寸规格/dimensions产品单重/Product single heavy 缺少配件/lack of parts东莞冠承精密塑胶五金有限公司DongGuan GuanCheng Precision Plastic Maunfacturing Co.,Ltd验货检验报告/Finished Goods Inspection Report订单核对/indent check 抽样标准依据MIL-STD-105E Ⅱ 单次抽样表MA=0.65。
服装英文验货报告范文
服装英文验货报告范文Clothing Quality Inspection Report.1. Introduction.This comprehensive quality inspection report aims to assess the conformity and quality of the clothing items under review. The inspection covers various aspects of the garments, including material, stitching, fit, and overall appearance. The report is conducted to ensure that the products meet the specified requirements and standards.2. Material Evaluation.The clothing items were inspected for the type of material used. The fabric was checked for its thickness, texture, and colorfastness. The inspection revealed that the majority of the items were made from high-quality cotton blend, which provided both comfort and durability. However, a few items showed slight variations incolorfastness, which might affect their longevity.3. Stitching Quality.The stitching was evaluated for its uniformity, tightness, and overall durability. The inspection teamnoted that the majority of the garments had neatly done stitching, with no loose threads or uneven patches. However, a few garments exhibited minor stitching issues, such as skipped stitches or uneven thread tension, which could potentially affect their durability.4. Fit and Design.The fit and design of the clothing items were also inspected. The items were measured to ensure they adheredto the specified size chart. Additionally, the cut and styling of the garments were assessed for their attractiveness and comfort. Overall, the inspectionrevealed that the majority of the items fitted well andwere designed to complement a wide range of body types.5. Packaging and Labeling.The packaging and labeling of the clothing items were also inspected. The items were checked for proper packaging, ensuring they were protected during transit. Additionally, the labels were inspected for accuracy, including size, material, and care instructions. The inspection revealedthat the packaging and labeling were generally satisfactory, with minor inconsistencies noted in a few cases.6. Conclusion.Overall, the clothing items under review exhibited good quality and conformed to the specified requirements. However, minor issues were identified in a few areas, such as colorfastness and stitching quality. It is recommended that these issues be addressed to ensure the highestquality standards are maintained. Additionally, attention should be paid to ensuring consistency in packaging and labeling to enhance the overall customer experience.7. Recommendations.To further improve the quality of the clothing items, the following recommendations are suggested:Conduct regular quality checks throughout the production process to identify and address any issues early on.Invest in high-quality materials to ensure durability and colorfastness.Train stitchers regularly to maintain consistent stitching quality.Implement strict quality control measures during packaging and labeling to ensure accuracy and consistency.By implementing these recommendations, it is expected that the quality of the clothing items will be further enhanced, providing a superior customer experience.8. Future Outlook.With the continuous evolution of fashion trends and consumer preferences, it is crucial to stay updated with the latest industry standards and best practices. The manufacturer should aim to innovate and improve their products to meet the changing needs of the market. By focusing on quality, comfort, and style, the manufacturer can ensure that their clothing items remain competitive in the market and continue to satisfy their customers.In conclusion, this quality inspection report provides a detailed assessment of the clothing items under review. While the majority of the items exhibited good quality, minor issues were identified that need to be addressed. By implementing the recommended measures, the manufacturer can ensure the highest quality standards are maintained, providing a superior customer experience.。
中英文验货报告模板
Inspection report
编号：
订单号:Order Number
供方名称SupplierName
订单交期ShippingDate
验货日期Inspection Date
生产单位Production unit
产品名称Description
中验Inline
尾验Final
1.检验清单InspectionList:
Critical严重疵点_Major/主要疵点__Minor/次要疵点__
严重疵点
主要疵点
次要疵点
1.
2.
3.
4.
5.
6.
7.
8.
TTL疵点总数
颜色/colour□严重色差/Serious off color□明显色差/Clear off color□无明显色差/Not have clear off color
干燥剂
desiccant
3,产品品质缺点及结论ProductDefective List&Results:
DEFECTS/DISCREPANCIES/疵点描述AQL___LEVELⅡ
Units Inspected/抽检数量:_____
Critical
Major
Minor
Acceptable Quality level/接受疵点数
3,验货时应最少完成批货量80%的完整包装。
验货员
Inspector(s):
供方代表SupplierRepresentative:
1,此报告仅作为本公司对所抽验的货品质量之确认,如产品在后续验货及到达客户手中仍发现有质量瘕疵,由供方负全部责任.
2,验货标准:MIL-STD-105E II级单次抽样.
英文验货货报告样本
X
Warnings
X
Safety requirement(Food Safety/Lead Cadmium testing/Salt spray)
Country of origin
X
Check confirm sample
XCheΒιβλιοθήκη k Product test report
Check factory assessment report
Defects description
Critical Major
1 2 3
Minor 4 2
4
Inspection comments and action required:
Found defects:
6
10
Allowed max.defect:
0
10
14
Accepted
Supplier（Signature）: Inspector: DU SHIHAI Approved by:
Batch or Lot size: 3504 SETS Sample size: 200 SETS Samples random selected from carton numbers:
1
783U0124AF: 5, 11, 19, 22, 33, 44, 62, 70, 113, 153, 174, 201, 220, 244, 256, 275, 310, 315, 324, 330 714U0124AF: 12, 16, 23, 31, 42, 66, 84, 137, 155, 162, 181, 219, 230, 243
SHUANGYU (TJ) INTERNATIONAL TRADE CO., LTD.
验货报告
验货报告(Quality Inspection Report)工厂名称(Factory Name ): 验货日期(Date of Inspection):客户(Customer): 产地(Country of Origin):订单编号(P.O.N 订单数量(Quantity of Order):产品名称(Description of Product): 货号(Item No.):(一)包装(Packing):个体包装(Individual Pucking):电脑条码(UPC No.)电脑扫描(UPC Scan) □通过(Pass) □失败(Fail)价格标(Pre-Price):包装体(Package Style): □ Blister □ Slider Blister □ Skin □ Color Box □ Double Blister □ Lable□ Polybag +Header □ Sleeve □ Shrink □ Tie of Card □ Others:品名是否与实体相符 (Description Show on Package Match With Product): □是□否品名是否有多国语言 (Description Show on Package In Various Language) □是，几种否内箱印刷(Inner box Mark)正确口错误口内装数量(Case Quantity) (Pcs)内箱电脑条码(Inner Carton UPC NO.): 电脑扫描(Scanning) □通过(Pass) □失败(Fail)外箱(Master Carton): 内装数量(Case Quantity) (Pcs)外箱电脑条码(Master Carton UPC No.): 电脑扫描(Scanning) □通过(Pass) □失败(Fail)唛头(Shipping Mark):正确口错误口尺寸(Dimension):长(L) 宽(W) 高(H) CM五层瓦楞纸(5Pry Corrugated Carton): 材积(Cuft) 净重(NW) 毛重(GW)普通外销纸箱(Normal Export Carton): 其他式样纸箱(Other Style Carton):天地展示箱(2pc PDQ Display Box):上盖仃op) 下箱(Bottom) 切割线(Die Cut)落地实验(Drop Test):(以60cm高度对外箱做摔箱试验，若3%及以上的产品或包装破损则测试失败)□通过(Pass) □失败(Fail)包装评语及改进 (Comment/Packing & Improvement):⑶不良情形： _________________________________________________________________________________________________________________(4)评语: _______________________________________________________________________________________________________________________ 验货结果：□通过□要求更正□复检□退货□待讨论INSPECTOR 验货员: _______________ VENDOR DELEGATE 工厂代表: ____________。
外贸QC检验验货中英文报告
外贸QC检验验货中英文报告Inspection Report for Quality Control and Goods Inspectionfor Foreign Trade日期：2024年X月X日 Date: X Month X, 2024供应商：XXX有限公司 Supplier: XXX Co., Ltd.采购商：XXX贸易有限公司 Buyer: XXX Trading Co., Ltd.验货地点：XXXXX Inspection Location: XXXXX产品名称：XXXXX Product Name: XXXXX产品数量：XXXXX Quantity: XXXXX1. 检验目的 Purpose of Inspection本次验货旨在核对供应商所提供的产品与采购商的要求是否相符，并对产品的质量状况进行评估。
The purpose of this inspection is to verify whether the products provided by the supplier are in accordance with therequirements of the buyer and to evaluate the quality conditionof the products.2. 检验标准 Inspection Standards本次验货的标准符合采购合同中约定的质量标准、规格和要求。
The standards for this inspection conform to the quality standards, specifications, and requirements agreed upon in the purchase contract.3. 检验项目 Inspection Items3.1外观检查：通过对产品的外观进行检查，确保产品外观无明显缺陷或损伤。
新的验货报告格式
末期验货意见/End inspection opinion
备注 : 仅为随意、少量抽检 , 并不免除工厂因产品内在质量问题所引起的索赔责任 . Note: only for optional, a small sampling, not remove inner quality problems due to the product factory caused by the claim responsibility. 供应商/Vendor 日期/Date 业务/Merch 日期/Date 验货员/QC 日期/Date
□严重色差/Serious off color
□明显色差/Clear off color
□无明显色差/Not have clear off color
尺寸记录/Size records 生产进度（%） Production(%) 绣花 /PVC/转移印及其他装饰/Decorations 各种配件装饰， 根据产品实际情况变化内容。 顶钮Top button/顶球pop and tip/下巴带/护耳earmuffs 车线/stitching 箱唛/Shipping Marks 主唛/Front Mark 侧唛/Side Mark 纸箱瓦楞数/Carton Layer 毛重/GW▁▁▁lbs 箱规/DIM □配色/ blendent 正确/Correct □ □ ▁▁▁▁▁▁▁▁ 净重/NW▁▁▁lbs 尺寸/Size □符合要求/OK □偏长/大/long/big □偏短/小/ short/small 缝纫/Sewn 洗水/Washed 熨烫/Pessed 整理/Finished 包装/Packed
内盒唛头/Inside box marks 吊牌内容/Tag content 价格牌内容/Price ticket still tied on content 洗标内容/Care label Mark 配比比例/Assortment
中英版产品检验报告模版
中英版产品检验报告模版产品检验报告模板 Product Inspection Report Template1. 报告概述 Report Overview本报告旨在对以下产品进行质量检验，并提供相关测试结果和质量评估。
This report aims to conduct quality inspection on the following products and provide corresponding test results and quality assessment.2. 产品信息 Product Information产品名称：（中文） Product Name: [Chinese]（英文） Product Name: [English]生产商：（中文） Manufacturer: [Chinese]（英文） Manufacturer: [English]供应商：（中文） Supplier: [Chinese]（英文） Supplier: [English]订单号： Order Number:检验日期： Inspection Date:3. 检验项目 Inspection Items本次检验涵盖的项目包括但不限于以下内容： The following items are covered in this inspection but not limited to:3.1 外观检查 Appearance Inspection对产品的外观进行检查，包括颜色、图案、工艺等方面的评估。
Evaluate the appearance of the product, including color, patterns, craftsmanship, etc.结果： Results:3.2 尺寸检查 Dimension Inspection对产品的尺寸进行检查，包括长度、宽度、高度等方面的测量。
服装英文验货报告尺码测量表范文
服装英文验货报告尺码测量表范文English:For a clothing quality inspection report with size measurement tables, it's essential to provide accurate and detailed information. Begin by listing each garment style and size within the report, specifying the measurements for key areas like chest, waist, hips, sleeve length, and garment length. Include tolerance levels for each measurement to indicate acceptable deviations from standard sizing. Use a consistent format and units throughout the report to ensure clarity and precision. Photographs of sample measurements can be beneficial to illustrate measurement techniques and aid in understanding. Additionally, document any discrepancies found during the inspection, such as variations in size between samples or deviations from the approved size specifications. This information is crucial for quality control and can assist in addressing production issues or ensuring compliance with customer requirements.中文翻译：对于带有尺码测量表的服装质量验货报告，提供准确详细的信息至关重要。
服装英文验货报告尺码测量范文
服装英文验货报告尺码测量范文English: During the garment inspection process, the size measurements are an important aspect to consider. The measurements are taken to ensure that the garments are in accordance with the specified size requirements. The measurements are usually taken for key areas such as the bust, waist, hips, and length. For example, the bust measurement is taken at the fullest part of the chest, the waist measurement at the narrowest part of the torso, and the hip measurement at the fullest part of the hips. Additionally, the length measurement is taken from specific reference points such as the shoulder or waist to ensure the correct length of the garment. It is important for the inspector to use accurate measuring tools such as a measuring tape to ensure precise measurements are obtained.中文翻译: 在服装验货过程中，尺码测量是一个重要的考虑因素。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Minor（小毛病）:
Sample size inspected
（抽验数量）:
Samples selected from carton numbers（抽验箱号）:
Reservation：（备注）
Manufacturer SignatureInspector Signaturer
□Conformed（确认）□Not conformed（不确认）□Subject to
client’s eபைடு நூலகம்aluation（提交人）
be l（标签）:
□Conformed（确认）□Not conformed（不确认）□Subject to
client’s evaluation（提交人）
6. onlinetranslation / field tests（高宽/重量）:
□Conformed（确认）□Not conformed（不确认）□Subject to
client’s evaluation（提交人）
INSPECTION METHOD APPLIED:（检验标准）
Acceptable Quality Level (AQL) for
（可接受的质量标准）:
Critical（严重毛病）:
Inspection Report (检验报告)
Buyer(买方）:
Supplier(卖方）:
Manufacturer（生产厂商）:
Product description:
(货物描述）
Order Number(订单号):
Service performed : FRI(最终检验）
Inspection Date:（检验日期）
(工厂签字):(检验员签字)：
Inspection Location :（检验地点）
REFERENCE SAMPLE PROVIDED（参考样）：
OVERALL INSPECTION CONCLUSION:（检验结果）
□Conformed（确认）
□Not conformed（不确认）
Subject to client’s evaluation（提交人）
client’s evaluation（提交人）
3. Workmanship appearance / function（工艺，做工）:
□Conformed（确认）□Not conformed（不确认）□Subject to
client’s evaluation（提交人）
4. Packing（包装）:
INSPECTION SUMMARY:（检查总结）
1. Quantity（数量）:
□Conformed（确认）□Not conformed（不确认）□Subject to
client’s evaluation（提交人）
2. , color（颜色）:
□Conformed（确认）□Not conformed（不确认）□Subject to