英文规格书
塑料粒子原料规格书英文
塑料粒子原料规格书英文The specification sheet for plastic resin typically includes the following information:1. Material Name: The specific type of plastic resin, such as polyethylene, polypropylene, polystyrene, etc.2. Grade: The grade of the resin, which may indicateits intended use or specific properties.3. Physical Properties: This section includes information on the resin's density, melt flow rate, tensile strength, impact strength, and other mechanical properties.4. Thermal Properties: Information on the resin's heat deflection temperature, melting point, and other thermal characteristics.5. Chemical Properties: Details on the resin's chemical resistance, including its resistance to various solventsand chemicals.6. Processing Guidelines: Recommendations for processing the resin, including information on recommended processing temperatures, drying requirements, and molding parameters.7. Regulatory Compliance: Information on any relevant regulatory standards or certifications the resin complies with, such as FDA approval for food contact.8. Packaging: Details on how the resin is packaged, including the form (pellets, powder, etc.) and the packaging materials used.It's important to note that the specific content and format of a resin specification sheet can vary depending on the manufacturer and the type of resin. If you have a specific type of plastic resin in mind, it would be best to consult the manufacturer or supplier for the most accurate and detailed specification sheet in English.。
产品承认书.8doc之英文版规格书
产品承认书SPECIFICATION FOR APPROVAL客户名称（CUSTOMER）：客户料号（PART NO.）：客户品名（DESCRIPTION）：U T 品名（DESCRIPTION）： UT-MD070080 V.2 日期（DATE）： 2011.7.1CONTENTS contents (2)Change description (3)1. Scope of application (3)2. Product Function Description (3)3. Standard Signal Input (3)4. Work Temp (3)5. Storage Temp (3)6. Operate Power Requirements (3)7. Specification (4)8. Power supply (9)9. Electrical parameters (9)10. LCD Specifications (9)11. Electrical circuit (10)12. Basic operating instructions (10)13. Testing equipment (12)14. Function test (12)15. Reliability test (14)16. Outgoing inspection standards (14)1. Scope of applicationThis standard applies to production for：AT080TN42.AT080TN01.AT080TN03.AT070TN83V.3.AT070TN82 V.1. AT102TN01.AT102TN03.A101VW01..AT080TN52.AT070TN92LCD display module driver board UT-MD070080 V.2 Inspection。
tpc7062ti 规格书 英文
tpc7062ti 规格书英文TPC7062TI Specification SheetProduct Overview:The TPC7062TI is a high-performance electronic component developed by TPC Co., Ltd. Based on advanced technology and rigorous testing, this specification sheet provides detailed information about the TPC7062TI and its various specifications.1. Introduction:The TPC7062TI is a versatile microcontroller that is widely used in various electronic devices and systems. With its robust features and reliable performance, it has gained popularity in the industry. This specification sheet aims to provide comprehensive details of the TPC7062TI for potential users and interested parties.2. General Specifications:- Microcontroller Family: TPC7- Model Number: 7062TI- Package Type: Integrated Circuit (IC)- Operating Voltage: 3.3V- Clock Speed: Up to 100 MHz- CPU Architecture: ARM Cortex-M3- Flash Memory: 256 KB- RAM: 32 KB- GPIO Pins: 46- ADC Channels: 12- UART Ports: 4- I2C Interfaces: 2- SPI Interfaces: 3- DMA Channels: 8- Operating Temperature Range: -40°C to +85°C3. Power Management:The TPC7062TI features efficient power management capabilities, ensuring optimal power consumption. It supports low-power modes, such as Sleep and Deep Sleep, allowing for extended battery life in battery-powered applications.4. Peripherals:The TPC7062TI is equipped with a wide range of peripherals, enabling seamless integration into various systems. Some of the key peripherals include:- Universal Asynchronous Receiver/Transmitter (UART): Allows for serial communication with external devices.- Inter-Integrated Circuit (I2C): Enables communication with peripheral devices using I2C protocol.- Serial Peripheral Interface (SPI): Supports high-speed synchronous data transfer with other devices.- Analog-to-Digital Converter (ADC): Enables analog signal measurement with high precision.- General-Purpose Input/Output (GPIO): Provides flexible digital signal I/O capabilities.- Direct Memory Access (DMA): Facilitates efficient data transfer between peripherals and memory.5. Security Features:To enhance system security, the TPC7062TI incorporates robust security features, including:- Advanced Encryption Standard (AES): Provides secure data encryption and decryption.- True Random Number Generator (TRNG): Generates random numbers for secure cryptographic operations.- Memory Protection Unit (MPU): Offers memory access control for improved system integrity and safety.6. Development Tools and Software:TPC offers a comprehensive set of development tools and software for the TPC7062TI. This includes an integrated development environment (IDE), compiler, debugger, and various libraries that facilitate easy development and debugging of applications using the TPC7062TI.7. Applications:The TPC7062TI is suitable for a wide range of applications, including but not limited to:- Home automation systems- Industrial control systems- Consumer electronics- Internet of Things (IoT) devices- Automotive electronicsConclusion:The TPC7062TI serves as a reliable and versatile microcontroller solution for various electronic systems and applications. Its comprehensive set of features, advanced security, and efficient power management make it an ideal choice for developers and engineers seeking high-performance embedded solutions.Note: This specification sheet is provided for informational purposes only and does not constitute a binding contract or purchase agreement. The specifications may be subject to change without prior notice. Customers are advised to contact TPC Co., Ltd. for the most up-to-date information regarding the TPC7062TI.End of Specification Sheet。
英文技术规格书范文
英文技术规格书范文Here's an example of a technical specification written in an informal and conversational English style, with each paragraph maintaining independence and variety in language characteristics:The gizmo is seriously cool. It's small enough to fitin your palm, but don't let its size fool you. This little device packs a punch. It's made from a lightweight but super-durable material that can take a few bumps and bruises without breaking a sweat.The gizmo's interface is seriously user-friendly. You don't need to be a tech wizard to figure it out. Just a few taps and swipes, and you're good to go. The screen isbright and clear, making it easy to see even in bright sunlight.One of the coolest features of the gizmo is its battery life. You can use it for hours on a single charge, so youdon't have to worry about it running out of juice mid-task. And when it does need a recharge, it's quick and painless.But wait, there's more! The gizmo is also compatible with a ton of different devices and software. So, whether you're using it with your phone, laptop, or even your smartwatch, it'll work seamlessly. No need to worry about compatibility issues here.Overall, the gizmo is a great choice for anyone looking for a compact, powerful, and user-friendly device. It's got everything you need and nothing you don't, making it a top pick in its category. So, if you're in the market for a new gizmo, give this one a serious look.。
ZS215规格书-V1.0英文版
1.97
2.0 0.65 36 25 2 20 5 60 7/4
2.03
V V ms mV us us ms uA
Current Sense Input Section (CS Pin)
TLEB Vcs(max) TD_OC 500 490 500 100 510 ns mV ns
On-Chip Thermal Shutdown
Parameter
HV PIN Maximum Voltage HV PIN DC Current @ZS215 VDD DC Supply Voltage VDD DC Clamp Current CS, BASE voltage range FB voltage range RJA (℃/W) (SOP7) Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Lead Temperature (Soldering, 10sec.) ESD Capability, HBM (Human Body Model) ESD Capability, MM (Machine Model)
Internal Error Amplifier (EA) Reference Input Short Load Protection (SLP) Threshold Short Load Protection (SLP) Debounce Time Demagnetization Comparator Threshold Minimum OFF time Maximum ON time Maximum OFF time Maximum Cable Drop Compensation(CDC) Current Ratio between Switching Period and Demagnetization Time in CC Mode CS Input Leading Edge Blanking Time Current limiting threshold Over Current Detection and Control Delay (Note 3) (Note 3) (Note 3)
技术规格书(中英文)
NPC-National Petro Co.3600t Revolving/Engineering CraneTechnical Specification (Project Plan)Shanghai Zhenhua Port Machinery (Group) Co., Ltd.2005-12-10Table of Content1.1 General Description 总则1.1.1Consist of the Specification 本规格书组成The specification including general, hull structure, outfitting, machinery, electrical, refrigerating, air conditioning, ventilating, pipelaying, DP, and crane parts describes the 3600t CRANE PIPELAYING VESSEL based on scheme design.本规格书由船舶总体、舾装、轮机、电气、通风冷藏空调、动力定位、起重机及铺管设备估价等部分组成，表述3600 t全回转起重工程船的主要技术规格方案。
1.1.2Construction Explanation建造说明The BUILDER’s supply covers the item described in this specification, anything excluding from the scope of the specification will be supplied by the OWNER.本船的建造估价，所有规格书所规定的项目均由建造方提供。
超过规格书部分船东提供。
1.1.3Language and Measuring Unit文种与计量单位The drawings, instructions, instruments, display, caution sign and nameplate shall be written in English and kept down the foreign nameplate of the importation of machine and equipments. Metric system is used for designing and fabricating of hull, crane and equipment etc. unless otherwise specialized in specification or instruction.本船的图纸、使用说明书、仪表、显示、警示牌和铭牌等均以英文书写。
hpgl材料英文版规格书
hpgl材料英文版规格书HPGL材料的英文版规格书（HPGL Material Specification Sheet）包含了有关该材料的详细信息，如物理特性、化学成分、机械性能、热性能、电气性能等方面的数据。
下面从多个角度来回答这个问题。
1. 物理特性：HPGL材料的物理特性描述了它的外观、密度、颜色、透明度等方面的特征。
规格书中可能会提供材料的外观描述，如表面光滑、有纹理等。
此外，还可能包含材料的密度，以及材料的颜色和透明度等信息。
2. 化学成分：HPGL材料的化学成分描述了它所含有的元素和化合物的种类及其含量。
规格书中可能会列出材料的主要成分，如聚合物、填料、添加剂等，并给出它们的含量范围。
此外，还可能提供材料的溶解性、化学稳定性等相关信息。
3. 机械性能：HPGL材料的机械性能描述了它在受力下的表现。
规格书中可能会提供材料的强度、刚度、韧性等参数。
例如，材料的抗拉强度、弹性模量、断裂伸长率等。
这些参数可以帮助用户了解材料在不同应力条件下的性能。
4. 热性能：HPGL材料的热性能描述了它在高温或低温环境下的表现。
规格书中可能会提供材料的热膨胀系数、热导率、玻璃化转变温度等参数。
这些参数对于设计需要考虑温度变化的应用非常重要。
5. 电气性能：HPGL材料的电气性能描述了它在电气应用中的特性。
规格书中可能会提供材料的电导率、介电常数、耐电击穿强度等参数。
这些参数对于电子器件设计和电气绝缘等方面的应用非常重要。
除了上述几个方面，规格书还可能包含其他相关信息，如可加工性、环境适应性、耐候性等。
总之，HPGL材料的英文版规格书是一份详细的文档，旨在提供全面的材料信息，以帮助用户了解和选择适合其特定应用的材料。
英文产品规格书
英文产品规格书Product Specifications: A Comprehensive GuideIntroductionProduct specifications are essential documents that outline the detailed information about a product. They serve as a reference for manufacturers, suppliers, and customers, ensuring that the product is designed, developed, and manufactured to meet specific requirements. This article will provide a comprehensive guide on how to create an effective English product specifications document, covering all the necessary aspects.1. Product DescriptionThe product description section should provide a clear and concise overview of the product, including its name, purpose, and target market. It should also include any key features or unique selling points that differentiate the product from competitors. For example, if the product is a smartphone, the description should mention its brand, model, operating system, screen size, and any other relevant specifications.2. Technical SpecificationsThis section focuses on the technical details of the product and provides in-depth information. It should cover all the components and functionalities of the product. For example, if the product is a laptop, the technical specifications should include details such as processor type and speed, RAM size, storage capacity, screen resolution, battery life, and connectivity options.3. Physical DimensionsThis section provides the physical measurements of the product, including its size, weight, and dimensions. It is essential for manufacturers and distributors to understand the product's physical characteristics for packaging, shipping, and storage purposes. This information helps customers visualize the product and determine whether it fits their requirements.4. Material and ConstructionIn this section, specify the materials used in the product's construction. This includes both the primary material and any additional components or accessories. For example, if the product is a car, mention the type of metal used for the body, the material used for the seats, and any other relevant information. It is important to highlight any special materials or construction methods that enhance the product's performance, durability, or aesthetics.5. Safety and ComplianceCompliance with safety regulations and standards is critical for any product. This section should outline any safety features, certifications, and compliance information relevant to the product. For example, if the product is an electronic device, mention the required certifications, such as CE or FCC, to ensure safe and reliable operation.6. Performance and TestingThis section should provide detailed information about the product's performance characteristics, highlighting its capabilities and limitations. For example, if the product is a camera, mention its resolution, zoom capability, image stabilization, and other relevant specifications. It is also essential to include any testing procedures or standards used to validate the product's performance.7. Packaging and AccessoriesDescribe the packaging design and materials used to ensure safe transportation and a visually appealing presentation for the product. Additionally, mention any included accessories and their specifications. This information helps customers understand what they will receive when purchasing the product.ConclusionCreating a comprehensive English product specifications document is crucial for manufacturers, suppliers, and customers. It ensures clear communication, sets expectations, and facilitates informed decision-making. By following the guidelinespresented in this article, you can create an effective product specifications document that accurately describes all aspects of the product. Remember to update the document regularly to reflect any changes or improvements to the product.。
英文产品规格书
英文产品规格书（Product Specification）通常包括以下内容：
1.产品名称（Product Name）：应准确、清晰地描述产品的名称。
2.产品概述（Product Overview）：简要介绍产品的用途、特点、优势等。
3.规格参数（Specification Parameters）：列出产品的详细规格，包括尺寸、重量、颜色、材料等。
4.性能指标（Performance Indicators）：描述产品的性能指标，如功率、速度、精度等。
5.包装与运输（Packaging and Shipping）：说明产品的包装方式、运输方式和注意事项。
6.安装与使用（Installation and Operation）：提供产品的安装和使用说明，包括所需的工具和准备工作。
7.品质与保证（Quality and Warranty）：提供产品的品质保证和售后服务信息，如保修期限、维修服务等。
8.注意事项与警告（Notes and Warnings）：列出使用产品时应注意的事项和潜在的危险，以确保安全使用。
9.附录（Appendix）：提供有关产品的附加信息，如技术图纸、使用手册等。
以上是英文产品规格书的基本内容，具体格式和要求可能因产品类型和行业而有所不同。
撰写英文产品规格书时，应注意语言的准确性和专业性，确保所有信息都清晰明了，以便客户和用户能够充分了解产品的性能和特点。
hg8546m英文规格书
hg8546m英文规格书HG8546M是一款光纤终端设备，主要用于家庭和小型企业的光纤接入网络。
下面是关于HG8546M的英文规格书的详细信息：1. 设备描述：HG8546M是一款基于EPON技术的光纤终端设备，具有4个以太网接口和2个电话接口，支持高速宽带接入和语音通信。
2. 光学特性：工作波长，TX 1310nm，RX 1490nm.光纤接口，SC/UPC.光纤类型，单模光纤。
3. 以太网接口：接口类型，4个10/100/1000M自适应以太网接口。
支持IEEE 802.3、IEEE 802.3u和IEEE 802.3ab标准。
支持VLAN功能，包括VLAN转发、VLAN隔离和VLAN透传等。
4. 电话接口：接口类型，2个FXS接口。
支持语音编解码，G.711A/U、G.723.1、G.729、G.722、iLBC等。
支持传真传输和呼叫等功能。
5. 硬件规格：处理器，1GHz主频的ARM Cortex-A9处理器。
内存，128MB DDR3。
存储，128MB Flash.电源，外部电源适配器，输入电压为AC 100-240V，输出电压为DC 12V.6. 软件特性：支持IPv4和IPv6双协议栈。
支持PPPoE、DHCP和静态IP等接入方式。
支持安全功能，如ACL、防火墙和端口转发等。
支持远程管理和故障排除功能。
支持TR-069和OMCI协议，方便运营商进行设备管理和配置。
请注意，以上信息仅为HG8546M的一般规格说明，具体的规格书可能会根据不同的厂商和版本略有差异。
如果你需要更详细的规格书，请参考相关厂商的官方文档或联系厂商获取。
mos规格书中英文版
mos规格书中英文版（最新版）目录1.MOS 规格书的概述2.MOS 规格书中文版的内容3.MOS 规格书英文版的内容4.MOS 规格书的应用领域正文MOS 规格书是一款电子产品的规格说明书，它包含了电子产品的各种参数、性能指标、工作环境等信息。
本文将介绍 MOS 规格书的概述，以及其中文版和英文版的内容，并探讨其在应用领域的重要性。
首先，我们来了解 MOS 规格书的概述。
MOS 规格书，全称为 MOS （Memory Operator System）规格书，是描述 MOS 存储器芯片的规格和特性的一份文档。
它包含了 MOS 存储器的技术参数、工作原理、接口电路等详细信息，对于电子工程师和相关技术人员来说，是设计、生产和使用 MOS 存储器的重要参考资料。
接下来，我们来看 MOS 规格书中文版的内容。
中文版规格书主要针对国内市场，它将 MOS 存储器的各项参数和特性用中文进行描述，方便国内的电子工程师和技术人员理解和使用。
中文版规格书通常包括以下几个部分：1.MOS 存储器的基本参数，如容量、速度、接口类型等；2.MOS 存储器的电气特性，如工作电压、电流、功率等；3.MOS 存储器的物理特性，如尺寸、重量、封装形式等；4.MOS 存储器的使用说明，如使用方法、注意事项、故障处理等。
再来看 MOS 规格书英文版的内容。
英文版规格书主要针对国际市场，它将 MOS 存储器的各项参数和特性用英文进行描述，方便全球范围内的电子工程师和技术人员理解和使用。
英文版规格书通常包括以下几个部分：1.MOS 存储器的基本参数，如 capacity、speed、interface type 等；2.MOS 存储器的电气特性，如 operating voltage、current、power 等；3.MOS 存储器的物理特性，如 size、weight、package type 等；4.MOS 存储器的使用说明，如 usage instructions、precautions、troubleshooting 等。
英文需求规格说明书（G9_SRS_G-Learning）
英⽂需求规格说明书（G9_SRS_G-Learning）Software RequirementsSpecificationforG-LearningVersion 1.0 approvedPrepared by G9G92008-03-31Table of ContentsTable of Contents (ii)Revision History (iii)1.General (1)1.1Purpose (1)1.2Document Conventions (1)1.3Intended Audience and Reading Suggestions (1)1.4Project Scope (1)1.5References (1)2.Overall Description (2)2.1Product Perspective (2)2.2Product Features (2)2.3User Classes and Characteristics (3)2.4Operating Environment (4)2.5Design and Implementation Constraints (4)2.6User Documentation (4)2.7Assumptions and Dependencies (4)3.System Features (4)3.1System Feature 1 ....................................................................................... 错误！未定义书签。
3.2System Feature 2 (and so on) .................................................................... 错误！未定义书签。
npm英文规格书
npm英文规格书一、引言随着全球化和技术发展的日益深入，越来越多的开发者需要阅读和撰写英文技术文档，其中就包括npm英文规格书。
本文将为你详细解析npm英文规格书的重要性、内容结构以及如何阅读和理解它。
同时，我们还将探讨如何在实际项目中应用npm英文规格书，以及解决常见问题。
二、npm英文规格书概述1.内容结构pm英文规格书主要包括以下几个部分：项目概述、功能特性、安装和使用、API参考、模块示例、配置和部署、兼容性、贡献者指南等。
这些部分详细介绍了npm的相关概念、操作方法和最佳实践。
2.关键术语解释在阅读npm英文规格书之前，我们需要了解一些关键术语，如package.json、dependencies、devDependencies、scripts等。
这些术语在npm项目中具有重要作用，了解它们有助于更好地理解规格书。
三、如何阅读和理解npm英文规格书1.基本阅读策略阅读npm英文规格书时，建议从项目概述开始，了解项目的整体目标和功能。
接下来，根据自己的需求，有针对性地阅读其他部分。
在阅读过程中，注意以下几点：- 掌握文章结构，明确各部分之间的关系；- 关注重点概念和操作方法，加深对项目的理解；- 遇到不明白的地方，查阅相关资料或请教他人。
2.实用技巧为了提高阅读效率，你可以采用以下实用技巧：- 使用词典或翻译工具辅助阅读，解决语言障碍；- 制作笔记，梳理关键知识点，方便随时查阅；- 与项目实际操作相结合，加深对英文规格书的理解。
四、npm英文规格书的实践应用1.实际项目中的应用在实际项目中，npm英文规格书可以帮助你：- 快速了解项目的结构和功能；- 掌握项目所需的操作方法和最佳实践；- 排查问题，提高开发效率。
2.与其他文档的结合使用为了更好地应用npm英文规格书，你可以结合其他相关文档，如：- 项目中文档：提供项目的背景、目标和详细说明；- 用户手册：介绍产品或服务的使用方法、功能和特点；- 开发者文档：为开发者提供编程指南、API参考和最佳实践。
规格保证书英文
Specification Guarantee Letter[Company Letterhead][Date]To Whom It May Concern,Subject: Specification Guarantee for [Product/Service]I am writing to confirm that our company, [Company Name], fully guarantees the specifications and quality of our [Product/Service] as per the details provided below. We understand the importance of meeting our customer's expectations and requirements, and we are committed to delivering a product/service that exceeds their expectations.Product/Service Description:The [Product/Service] provided by our company is [briefly describe the product/service, including any relevant features, components, or specifications]. It is designed and manufactured to comply with the highest industry standards and regulations.Specifications:1. [Specification 1]: [Description and details of the specification]2. [Specification 2]: [Description and details of the specification]3. [Specification 3]: [Description and details of the specification]...(Continue listing all relevant specifications)Quality Assurance:Our company implements a rigorous quality control process to ensure that each unit of the [Product/Service] meets the specified requirements. Our dedicated quality assurance team performs thorough inspections and tests at various stages of production, including raw material sourcing, manufacturing, assembly, and final packaging. We use advanced testingequipment and methodologies to guarantee the reliability and durability of our product/service.Warranty:We provide a [specify the duration] warranty for our [Product/Service], starting from the date of delivery. During the warranty period, we will repair or replace any defective or non-compliant product/service at no additional cost to the customer. Our warranty covers manufacturing defects, material failures, and any other issues that may arise due to normal usage under the specified operating conditions.Customer Support:In addition to the warranty, we offer comprehensive customer support to ensure the continued satisfaction of our customers. Our dedicated customer service team is available [provide contact details and availability] to address any queries, concerns, or issues related to our [Product/Service]. We strive to provide prompt and effective solutions to ensure the smooth operation of our customers' businesses.We understand that our [Product/Service] is an investment for our customers, and we are committed to providing the highest level ofquality and satisfaction. We have a strong track record of delivering reliable and efficient solutions to our customers, and we pride ourselves on our reputation for excellence.If you have any further questions or require any additional information, please do not hesitate to contact us. We appreciate the opportunity to serve your needs and look forward to delivering a superiorproduct/service.Sincerely,[Author's Name][Title][Company Name][Contact Information]。
阿特斯单面550瓦英文规格书
阿特斯单面550瓦英文规格书【原创版】目录1.阿特斯单面 550 瓦简介2.英文规格书的结构3.阿特斯单面 550 瓦的性能特点4.使用方法和注意事项5.结论正文一、阿特斯单面 550 瓦简介阿特斯单面 550 瓦是一款性能优良的太阳能电池板，采用高效率的太阳能电池技术，将阳光能转化为可利用的电能。
该产品具有环保、节能、易于安装等特点，广泛应用于家庭、商业及工业领域。
二、英文规格书的结构英文规格书通常包括以下几个部分：1.封面：包含产品名称、型号、制造商等基本信息。
2.目录：列出规格书的各个章节和页码。
3.引言：简要介绍产品的背景、用途和特点。
4.技术参数：详细列出产品的各项性能指标。
5.工作原理：介绍产品的工作原理和运行方式。
6.安装和使用：提供产品的安装方法和使用注意事项。
7.维护和保养：介绍产品的维护保养方法和技巧。
8.结论：总结产品的优点和适用场景。
9.附录：提供与产品相关的技术资料和数据。
三、阿特斯单面 550 瓦的性能特点阿特斯单面 550 瓦太阳能电池板具有以下性能特点：1.高效率：采用高效率的太阳能电池技术，光电转化率高，能充分利用阳光资源。
2.优良的弱光性能：在弱光环境下，仍能保持较高的电力输出。
3.稳定性：产品具有较强的抗风、抗震、抗雪压能力，能适应各种恶劣气候环境。
4.环保：不含有害物质，对环境无污染。
5.长寿命：产品设计寿命为 25 年，具有较长的使用寿命。
四、使用方法和注意事项1.使用方法：（1）根据需要选择合适的安装地点和角度，确保太阳能电池板能充分接收阳光。
（2）将太阳能电池板与控制器、蓄电池等组件连接，形成完整的太阳能发电系统。
（3）进行系统调试，确保各组件正常工作。
2.注意事项：（1）避免在阴暗、潮湿的环境中安装太阳能电池板。
（2）确保太阳能电池板安装牢固，避免因风、震等外力造成损坏。
（3）定期检查系统各组件的工作状态，发现问题及时处理。
五、结论阿特斯单面 550 瓦太阳能电池板具有高效率、优良的弱光性能、稳定性、环保和长寿命等优点，适用于家庭、商业及工业领域的太阳能发电系统。
AMS1117-3.3英文规格书
1A Adjustable/Fixed Low Dropout Linear Regulator- Low dropout voltage- Load regulation: 0.2% typical - Optimized for Low V oltage - On-chip thermal limiting- Standard SOT-223 and TO-252 packages- Three-terminal adjustable or fixed low dropout 1.2V ,1.5V ,1.8V , 2.5V , 2.85V , 3.3V , 5V . Regulators- Active SCSI terminators- High efficiency linear regulators- Post regulators for switching supplies - Battery chargers- 12V to 5V linear regulators - M otherboard clock suppliesThe AMS 1117-ADJ and AMS 1117-1.2,-1.5,-1.8,-2.5,-2.85, -3.3 and-5 are low dropout three-terminal regulators with 1A output current capability. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The 2.85V version is designed specifically to be used in Active Terminators for SCSI bus.On-chip thermal limiting provides protection against any combination of overload and ambient temperatures that would create excessive junction temperatures.Unlike PNP type regulators where up to 10% of the output current is wasted as quiescent current, the quiescent cur-rent of the AMS 1117 flows into the load, increasing effi-ciency.The AMS 1117 series regulators are available in the indus-try-standard SOT-223 and TO-252 power packages.Key FeaturesApplicationsGeneral DescriptionTypical ApplicationNotice: The distance between V out pin and Capacitor should not exceed 4cm for excellent performanceFigure 1. Typical Applications of AMS 11171A Adjustable/Fixed Low Dropout Linear RegulatorPin Assignments*With package soldered to 0.5 square inch copper area over backside ground plane or internal power plane, ΘJA can vary from 30°C/W to more than 50°C/W. Other mounting techniques may provide better thermal resistance than 30°C/W.Absolute Maximum RatingsFigure 2. Pin Assignments of AMS 1117ParameterMin.Max.UnitV IN 18 V(V IN – V OUT ) * I OUTSee Figure 3Operating Junction Temperature Range -20 125°C Storage Temperature Range-65150°C Lead Temperature (Soldering, 10 sec.) 300°C1A Adjustable/Fixed Low Dropout Linear RegulatorTypicals and limits appearing in normal type apply for T J =25℃.Limits appearing in Boldface type apply over the entire junction temperature for operation, -20℃to 125℃.Electrical CharacteristicBlock DiagramThermal LimitCurrent LimitV OUTV INSubstrateGND (fixed output) ADJ. (adjustable output)Figure 3. Block Diagram of AMS 1117SymbolParameterConditionsMin (Note 2) Typ (Note 1) Max(Note 2)UnitsV REFReference VoltageAMS 11171.5V<=(V IN -V OUT )<=7V,10mA<=I OUT <=1A1.225 1.250 1.275 VV OUT Output Voltage10mA<=I OUT <=1AI OUT = 10mA, V IN = 3.2V AMS 1117-1.2 ,2.7V<= V IN <=8.2V 1.176 1.152 1.200 1.200 1.224 1.248 V AMS 1117-1.5 ,3.0V<= V IN <=8.5V1.4701.5001.530VAMS 1117-1.8 ,3.3V<= V IN <=8.8V 1.764 1.800 1.836 VAMS 1117-2.5 ,4V<= V IN <= 9.5V 2.450 2.500 2.550 V AMS 1117-2.85 , 4.35V <= V IN <= 9.85V 2.793 2.850 2.907 V AMS 1117-3.3 , 4.8V<= V IN <=10.3V 3.234 3.300 3.366 V AMS 1117-5.0,6.5V<=V IN <= 12V4.9005.0005.100V1A Adjustable/Fixed Low Dropout Linear RegulatorTypicals and limits appearing in normal type apply for T J =25℃.Limits appearing in Boldface type apply over the entire junction temperature for operation, -20℃ to 125℃.Electrical Characteristic(Continued)Symbol ParameterConditionsMin (Note 2)Typ (Note 1) Max (Note 2) Units △V OUTLine Regultion (Note 3)I OUT =10mA ,(V OUT +1.5V)<=V IN <=12V 0.035 0.2 % Load Regultion (Note 3) V IN -V OUT =2V,10mA<= I OUT <=1A,0.2 0.7 % AMS 1117-1.2V IN -V OUT =2V,10mA<= I OUT <=1A,0.2 1 % V IN -V OUTDropout Volage I OUT =1A,△V REF =1% 1.100 1.250 V I LimitCurrent Limit V IN -V OUT = 2V, T J =25℃1.1 1.5A Minimum Load Current (Note 4) AMS 1117-ADJ1.5V<=(V IN -V OUT )<=10V10mA Quiescent CurentV IN =V OUT +1.25V 5 13 mA Thermal Regulation T A = 25°C, 30ms pulse 0.01 0.1 %/W RippleRejection f=120Hz,V IN -V OUT =3V, V Ripple =1V PP60 72 dB Adjust Pin Current50120µAAdjust Pin CurrentChange 1.5V<=V IN -V OUT <=7V, 10mA<=I OUT <=1A0.2 5 µATemperature Stability0.5 % Long Term StabilityT A = 125°C, 1000hrs.0.3%1A Adjustable/Fixed Low Dropout Linear RegulatorNote 1: Typical Values represent the most likely parametric norm. Note 2: All limits are guaranteed by testing or statistical analysis.Note 3: Load and line regulation are measured at constant junction room temperature. Note 4: The minimum output current required to maintain regulation.Typical Performance CharacteristicsTypicals and limits appearing in normal type apply for T J =25℃.Limits appearing in Boldface type apply over the entire junction temperature for operation, -20℃to 125℃.Electrical Characteristic(Continued)Symbol ParameterConditionsMin (Note 2) Typ (Note 1) Max (Note 2)UnitsI LimitRMS Output Noise(% ofV OUT )T A = 25°C, 10Hz<= f <=10kHz0.003 % Thermal Resistance, Junctionto CaseSOT-22315 ℃/W TO-252 3 ℃/W Thermal Shutdown Junction Temperature155 ℃ Thermal Shutdown Hysteresis25℃Output Current ( A )0 0.2 0.4 0.6 0.8 1.01.5 1.4 1.3 1.2 1.0 0.9 0.8 0.7 0.6 0.5 0D r o p o u t V o l t a g e ( V )Figure 4. Dropout Voltage VS. Output Current1A Adjustable/Fixed Low Dropout Linear RegulatorTypical Performance Characteristics(Continued)Figure 6. Output Voltage VS. TemperatureO u t p u t V o l t a g e ( V )3.70 3.65 3.603.553.50 3.45 3.40 3.35 3.30 3.253.20Junction Temperature ( ℃ )-75 –50 –25 0 25 50 75 100 125 150 175Figure 5. Reference Voltage VS. TemperatureR e f e r e n c e V o l t a g e ( V )0.260 1.255 1.250 1.245 1.240 1.235 1.225 1.220 1.215 1.210Junction Temperature ( ℃ )-75 –50 –25 0 25 50 75 100 125 150 175Figure 7. Minimum Load Current VS. TemperatureM i n i m u m L o a d C u r r e n t ( m A )5 4 3 2 1Junction Temperature ( ℃ ) -75 –50 –25 0 25 50 75 100 125 150 175Figure 8. ADJ Pin Current VS. TemperatureA D J P i n C u r r e n t ( µA ) 100 90 807060 50 40 30 20 10 0Junction Temperature ( ℃ ) -75 –50 –25 0 25 50 75 100 125 150 175Note:AMS 1117 OnlyAMS11171AAdjustable/Fixed Low Dropout Linear RegulatorMechanical Dimensions4-Lead SOT-223 PackageSymbolInches Millimeters NotesMin.Max.Min. Max.A Ñ .071 Ñ 1.80 A1 Ñ .181 Ñ 4.80B .025 .033 .064 .840 c Ñ 0.90 Ñ 2.29 D .248 .264 6.30 6.71 E .130 .148 3.30 3.71 e .115 .124 2.95 3.15 F .033 .041 .840 1.04 H .264 .287 6.71 7.29 I .0121 Ñ .310 Ñ J Ñ 10° Ñ 10° K 10° 16° 10° 16° L.0008 .0040 .0203 .1018 M 10° 16° 10° 16° N.010.014.250.360Figure 9. 4-Lead SOT-223 Package1A Adjustable/Fixed Low Dropout Linear RegulatorMechanical Dimensions(Continued)3-Lead TO-252 PackageNotes:1. Dimensions are exclusive of mold flash, metal burrsor interlead protrusion.2. Stand off-height is measured from lead tip with ref. toDatum –B-.3. Foot length is measured with ref. to Datum –A– withlead surface. 4. Thermal pad contour optional within dimension b3 and L3.5. Formed leads to be planar with respect to one anotherat seating place –C-.6. Dimensions and tolerances.SymbolInchesMillimetersNotesMin. Max.Min. Max.A .086 .094 2.19 2.39 b .025 .035 0.64 0.89 b2 .030 .045 0.76 1.14 b3 .205 .215 5.12 5.46 4 c .018 .024 0.46 0.61 c2 .018 .023 0.46 0.58 D .210 .245 5.33 6.22 1E .250 .265 6.35 6.73 1e .090 BSC 2.29 BSCH .370 .410 9.40 10.41 L .055 .070 1.40 1.78 3 L1 .108 REF 2.74 REFL3 .035 .080 0.89 2.03 4 L4.025.0400.641.02Figure 10. 3-Lead TO-252 Package1A Adjustable/Fixed Low Dropout Linear RegulatorAdvanced Monolithic Systems The " " logo is a registered trademark of Advanced Monolithic Systems.All other company and product names are trademarks of their respective ownersOrdering InformationPackageTemperature Range Part Number Output Voltage Packing Marking Transport MediaSOT －223－２０℃ - +125℃ AMS 1117-1.2 1.2V AMS 1117 1.2 2.5K Tape and Reel －２０℃ - +125℃ AMS 1117-1.5 1.5V AMS 1117 1.5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-1.8 1.8V AMS 1117 1.8 2.5K Tape and Reel-20℃ - +125℃ AMS 1117-2.5 2.5V AMS 1117 2.5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-2.85 2.85V AMS 1117 2.8 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-3.3 3.3V AMS 1117 3.3 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-5 5V AMS 1117 5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117 Adjust AMS 1117 2.5K Tape and Reel TO －252-20℃ - +125℃ AMS 1117-1.2 1.2V AMS 1117 1.2 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-1.5 1.5V AMS 1117 1.5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-1.8 1.8V AMS 1117 1.8 2.5K Tape and Reel-20℃ - +125℃ AMS 1117-2.5 2.5V AMS 1117 2.5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-2.85 2.85V AMS 1117 2.8 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-3.3 3.3V AMS 1117 3.3 2.5K Tape and Reel -20℃ - +125℃ AMS 1117-5 5.0V AMS 1117 5 2.5K Tape and Reel -20℃ - +125℃ AMS 1117CD Adjust AMS 1117CD 2.5K Tape and ReelDisclaimer:• AMS reserves the right to make changes to the information herein for the improvement of the design and performancewithout further notice! Customers should obtain the latest relevant information before placing orders and should verify that such information is complete and current.• All semiconductor products malfunction or fail with some probability under special conditions. When using AMS productsin system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards strictly and take essential measures to avoid situations in which a malfunction or failure of such AMS products could cause loss of body injury or damage to property.• AMS will supply the best possible product for customers!。
slc32pda228英文规格书
一、规格书的定义及作用规格书是指对某一产品或项目具体要求的详细说明文件，它记录了产品或项目的技术参数、功能特性、性能指标等内容，是产品开发、生产和验收的依据。
规格书的编写是产品研发和生产的重要环节，也是产品质量管理的重要文件。
英文规格书则是指以英文书写的规格书，通常用于国际贸易、跨国合作、国际标准认证等场合。
二、规格书的内容和结构1. 产品描述：对产品的基本情况进行简要介绍，包括产品名称、型号、外观特征、功能用途等。
2. 技术参数：包括产品的尺寸、重量、颜色、材质、工作温度等具体参数。
3. 性能指标：产品的性能特点、性能参数、性能测试方法和结果等。
4. 使用说明：产品的安装、使用、维护、保养等注意事项和操作规程。
5. 质量标准：产品应符合的国际、行业、企业质量标准。
6. 安全标准：产品应符合的国际、行业、企业安全标准。
7. 测试、检验和验收：对产品进行测试、检验和验收的方法、标准和流程。
8. 包装和运输：产品的包装要求、运输方式、运输条件等。
9. 售后服务：对产品的保修期、维修服务、技术支持等内容的要求。
10. 附录：相关的图纸、图表、测试报告、证书等附加资料。
三、编写英文规格书的注意事项1. 语言准确：规格书中的英文表述应准确清晰，避免歧义和误解。
2. 标点规范：遵循英文写作的标点规范，使文档结构清晰，表达准确。
3. 逻辑严谨：规格书的内容要遵循严密的逻辑关系，层次清晰。
4. 使用专业术语：使用行业通用的专业术语，避免翻译错误和理解偏差。
5. 格式规范：规格书的版式、字体、标号、标题等要求统一规范。
四、英文规格书的编写与应用1. 编写要求：英文规格书的编写需要由具有相关专业知识和语言能力的人员负责，要求全面、准确、规范。
2. 应用领域：英文规格书通常用于国际贸易、跨国合作、国际标准认证等领域，是产品质量管理和国际合作的重要文件。
3. 对外交流：英文规格书作为产品推广、技术交流的重要依据，对外交流时能够准确传达产品的特性和要求。