半导体放电管

JKS’S TSS

-1-

CONTENTS Contents (2)

High Reliability Experiment Lis t…………………………………………3-4

SMA(DO-214AC)Series…………………………………………………5-9

SMB(DO-214AA)Series…………………………………………………10-14

TO-92Series…………………………………………………15-19 DO-41/15/27Series…………………………………………………20-25

-2-

High reliability Experiment List可靠性试验项目

NO.

Experiment

Item

Time

or Cycle

Experiment

Conditions

Reference

1High

Temperature

Reverse Bias

96-180H

①T A=125±5℃forO/J

②T A=150±5℃for GPP

Bias=80%VR for all

MIL-STD-750D

METHOD-1038

2Steady-state

Operation Life

168-1000H

Rated average rectifier

current

IO=IF(AV)@TA=25℃

MIL-STD-750D

METHOD-1027

3HT Storage168-1000H TA=150±5℃MIL-STD-750D METHOD-1031

4Intermittent

Operation Life

1000CYCLE ON=5Min with rated IO

MIL-STD-750D

METHOD-1036

5Temperature

Cycling(air to

air)

10CYCLE

TH=150+3/-0℃10Min

TL=-55+0/-3℃10Min

Transfer time=5min

MIL-STD-750D

METHOD-1051

6Thermal Shock10CYCLE 0℃/5MIN

100℃/5MIN

MIL-STD-750D

METHOD-1056

7Soldering Heat10SEC260±5℃MIL-STD-750D METHOD-1031

High reliability Experiment List可靠性试验项目

-3-

NO.

Experiment

Item

Time

or Cycle

Experiment

Conditions

Reference

8Lead pull10SEC 1Kg in axial lead

direction

MIL-STD-750D

METHOD-1036

9Lead Fatigue3TIMES 0.5Kg weight applied to

each lead bending are90

±5℃

MIL-STD-750D

METHOD-1036

10Unbiased

Autoclave Test

4/8/16/24H

T A=121±2℃

P=29.7Psia/205KPa

RH=100%

11ForwordSurge

Current

1PULSE

8.3mS or10mS single

half sinewave

superimposed on rated

load

MIL-STD-750D

METHOD-1066

12Solderability10SEC245±5℃ANSI/J-STD-B10 2-E

JKS’S TSS SMA Series

-4-

Features

◆Bi-directional crowbar transient voltage protection

◆High surge capability

◆High off-state impedance

◆Low leakage current

◆Low on-state voltage

◆Short-circuit failure mode DO-214AC(SMA)

Main Application

ELA’s thyristor surge protector devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lighning,power contact,and power induction.These devices enable equipment to comply with various regulatory requirements including GR1089,ITU K.20,K.21and K.45,IEC 60950,UL60950,and TIA-968-A(formerly known as FCC Part68).

Typical application including:

●Central office switching equipment.Analog and digital linecards(xDSL,T1/E1,ISDN……)

●Customer Premises Equipment(CPE)such as phones,fax machines,modems,POS

terminals,PBX systems and caller ID adjunct boxes.

●Primary protection modules including Main Distribution Frames(MDF),building

entrance equipment and station protection modules.

●Access network equipment such as remote terminals,line

repeaters,multiplexers,cross-connects,WAN equipment,Network Interface Devices(NID).

●Data lines and security systems.

●CATV line amplifiers and power inserters.

●Sprinkler systems.

Electrcal Characteristics(Tamb=25℃)

-5-