雷奥尼克质量流量计中文说明书 RHE 07 08 11
AMF 系列 科里奥利质量流量计 用户手册说明书
AMF系列科里奥利质量流量计用户手册加拿大处弗洛有限公司TRUFLOW CANADA INC.目录0前言 (1)设备检查 (1)公司信息 (1)1安全说明 (1)1.1法律和指令 (1)1.2危险区域安装 (1)2原理及应用 (2)2.1测量原理 (2)2.2应用 (2)2.3设计 (2)3AMF系列技术规格 (3)3.1技术参数 (5)4安装 (6)4.1安全预防措施 (6)4.2安装简介 (6)4.3安装形式 (7)4.4变送器电气连接 (11)4.4.1电源线连接 (11)4.4.2脉冲输出接线 (11)4.4.3RS-485通讯口接线 (11)4.4.4电流环/HART输出接线 (11)5调试 (12)5.1电源 (12)5.2调零 (12)6服务/维护..............................................................126.1维护 (12)6.2运输/存储 (12)6.3维修 (12)6.4技术支持 (12)7.订购信息 (13)附录A故障分析 (16)附录B质量流量计变送器MODBUS协议使用手册17 B.1常规技术数据 (17)B.2电气连接 (17)B.2.1RS-485连接 (17)B.2.2通信设置 (17)B.3MODBUS协议 (17)B.3.1Modbus RTU (17)B.3.2数据类型 (17)B.3.3常用寄存器 (18)B.3.3.1过程测量寄存器 (18)B.3.3.2通信配置寄存器 (18)B.3.3.3过程控制寄存器 (20)B.3.3.4传感器参数寄存器 (22)附录C显示器操作手册 (23)C.1基本信息 (23)C.1.1显示单元 (23)C.1.2按键定义 (23)C.2功能表介绍 (23)C.2.1主界面详解 (23)C.2.2设置和查看界面 (24)变送器配置和产品定制信息 (26)0前言1)手册内容包含使用本设备所需的全部信息。
E+H质量流量计中文说明书
BA057D/06/zh/06.0550098468PROline promass80科氏力质量流量测量系统操作指南简明操作指南该操作指南指导您对测量仪表进行快速简便的设定安全指南第页7安装第页31接线第页13第页23显示和操作单元使用“快速设定”进行调试QUICK SETUP ()第页50您可使用“快速设定”菜单对测量仪表进行快速、方便的调试，使用现场显示设置基本功能，如显示语种、测量变量、变量单位、信号种类等以下功能可单独实现（如需要）：－零点校正－密度校正－电流输出设置（有源无源）QUICK SETUP()/用户专用设置复杂测量操作需要某些附加功能，您可以借助于功能矩阵进行设置，并将其用户化以满足您的测量过程需要提示：所有功能的详细描述，请查阅“”手册功能描述提示：如在调试后或操作过程中出现故障，请启动故障诊断，见第页诊断清单，找出故障原因以及相应的排障措施。
61第页52主显示页快速设定初始化质量流量E E语言预设定体积流量标准体积流量密度温度退出质量流量单位体积流量单位密度单位温度单位累积器单位累积器单位参考密度单位参考密度值设定其他单位？选择系统单位是否测量模式选择输出模式电流输出1电流输出2频率/脉冲输出退出操作模式频率脉冲电流对应变量电流对应变量电流范围电流范围0/4mA 对应值20mA 对应值时间常数失效模式0/4mA 对应值20mA 对应值时间常数频率对应变量频率上限频率下限频率上限值输出信号时间常数脉冲对应变量脉冲当量脉冲宽度输出信号失效模式失效模式设定其他输出？是否自动设定显示是否自动设定显示参数失效模式标准体积流量单位快速设定提示：快速设定菜单的详细信息，尤其是不带现场显示仪表的操作，请查阅第页。
50·在参数输入过程中按ES C 键，返回QU I CK S ET U P CO MM I SS I O N ，所设定的参数值有效·在进行以下快速设定前必须启动“快速设定”功能·①对当前设定中未设置的单位进行选择，在相应的流量单位中选择质量流量、体积流量、标准体积流量单位·②保持“Y E S ”选项，直到所有单位设置完成“N O ”选项表示没有需要设置的单位·③只对当前设定中未设置的输出进行选择·④保持“Y E S ”选项，直到所有输出设置完成“N O ”选项表示没有需要设置的输出·⑤“参数化显示”包含下列基本设定/出厂设定：YE S :第一行＝质量流量；第二行＝累积量1；NO :保持现有的设定提示：正确使用安装、调试和操作操作安全返修安全规范和图标名称变送器铭牌传感器铭牌标志，一致性声明注册商标收货确认、运输和储存收货确认运输储存安装条件尺寸安装位置安装方向伴热保温进出口直管段振动限流安装指南旋转变送器外壳墙挂式变送器安装旋转现场显示模块安装后的检查分离型仪表的连接传感器的连接电缆规格测量单元的连接变送器的连接端子分配连接防护等级接线后的检查显示和操作单元功能矩阵简明操作指南注意事项激活编程模式禁止编程模式错误信息通信操作选项仪表和过程变量1．安全指南．标识．．．7....................................................2 (9)1.1...............................................................71.2..........................................71.3...............................................................71.4.....................................................................81.5. (8)2.1 (9)2.1.1...................................................92.1.2.................................................102.2CE ....................................102.3.............................................................113.1.. (13)3.1.1....................................................133.1.2............................................................133.1.3............................................................143.2. (14)3.2.1.............................................................143.2.2....................................................143.2.3....................................................163.2.4............................................................183.2.5............................................................193.2.6.............................................193.2.7............................................................193.2.8............................................................193.3 (20)3.3.1.........................................203.3.2......................................213.3.3.......................................223.4......................................................224.1. (23)4.1.1..............................................234.1.2....................................................244.2. (25)4.2.1.............................................254.2.2....................................................274.2.3HART .................................................284.3......................................................294.4....................................................305.1.............................................315.2.. (32)5.2.1......................................................335.2.2............................................335.2.3............................................335.3.......................................................345.4. (35)5.4.1....................................................355.4.2 (36)仪表3.................................................................134...................................................................235...................................................................31安装接线操作目录5.4.3/HART .................375.4.4/..................................436.1...................................................496.2. (49)6.2.1..........................................496.2.2....................................506.2.3.................................................526.2.4.................................................546.2.51/.............................556.2.62/............................566.2.7..............................579.1............................................619.2............................................629.3............................................679.4.............................699.5..............................................709.6........................................................729.7.............................739.8....................................779.9...................................................78.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................通用型普通应用型指令仪表状态错误信息功能检测调试测量仪表上电快速设定“调试”零点校正密度校正电流输出：有源无源电流输出：有源无源吹扫和压力监测连接故障诊断指南系统错误信息过程错误信息无显示信息的过程错误输出响应错误备品备件更换和安装印刷线路板仪表保险丝的更换软件版本6.................................................................497................................................................588................................................................599.......................................................6110.....................................................调试维护附件故障诊断技术参数一览应用功能和系统设计输入输出供电性能特性操作条件机械结构用户接口认证订货信息附件相关文件尺寸；墙挂式变送器尺寸：不锈钢现场变送器技术参数8110.18110.1.18110.1.28110.1.38110.1.48310.1.58310.1.68410.1.78810.1.89710.1.910010.1.1010010.1.1110010.1.1210110.1.1310110.210210.310210.4（P r om a s s F ,M ,A,H ,I ）....10310.5尺寸：分离型（P r om a s s E ）10310.6尺寸：分离伴热型10310.7尺寸：高温型（一体化型）10410.8尺寸：高温型（分离型）10410.9尺寸：Pr o ma ss F 10510.10尺寸：Pr o ma ss M 11510.11尺寸：Pr o ma ss E 12910.12尺寸：Pr o ma ss A 13810.13尺寸：Pr o ma ss H 14410.14尺寸：Pr o ma ss I 146尺寸：分离型.....................................................................................................................................................................................................................................................................................................................................................................................1安全指南1.1正确使用PR Ol in e P ro ma s s 8系列流量计用于测量液体和气体的质量流量，同时也可测量流体密度和温度。
EL-FLOW Prestige 系列 热式质量流量计 控制器 使用说明书
使用说明书EL-FLOW®Prestige系列热式质量流量计/控制器文档号：9.17.084版本号：R日期：2022年7月26日注意事项安装使用本产品前，请仔细阅读本文档。
如未按照操作手册操作，很可能造成人身伤害和/或设备损坏。
————————————————————Bronkhorst®————————————————————版权所有©2022Bronkhorst High-Tech B.V.保留所有权利。
如未事先征得出版商书面许可，任何人士不得以任何形式或方式，复制本出版物任何内容。
免责申明我司已对本文档所有信息进行审慎审查，我司认定所有信息完全可靠。
Bronkhorst High-Tech B.V.不对本文档可能存在的任何错误、表述不当或信息缺失承担责任。
本文档所列材料仅用于进行信息说明；不会派生任何权利。
Bronkhorst High-Tech B.V.保留修改或改进旗下产品，更新文档内容相关权利，进行该等事宜前，无需通知任何特定个人或组织。
实际设备规格与产品包装很可能与文档所述内容存在差异。
使用说明书如中英文版本内容存在差异，皆以英文版本为准。
本文档的符号设备接收检查外包装，确定运输期间是否造成损坏。
若包装受损，请立即通知当地承运人承担相应责任。
同时应向Bronkhorst代表出具相应报告。
请小心拆开包装箱。
确认包装内产品运输期间是否损坏。
若包装受损，请立即通知当地承运人承担相应责任。
同时应向Bronkhorst代表出具相应报告。
退货运输相关事宜参见拆除和退货说明。
设备仓储•设备应用原包装包装后，储存在气候受控的环境中。
•注意！不得将设备储存在温度过高或过低的环境中。
•储存条件相关信息参见技术规格（数据表）。
————————————————————Bronkhorst®——————————————————————保修条款Bronkhorst®承诺，自产品交付之日起三年内，产品不存在任何材料和工艺缺陷，但前提是产品使用须符合相应产品参数，且不存在产品滥用、物理损坏或污染的情形。
ABB质量流量计中文说明书
ABB质量流量计中文说明书发布时间：10-04-08 来源：点击量：33792 字段选择：大中小操作手册D184B111U02科里奥利质量流量计标准软件D699G001U01 A.3x零件号.D184B111U02发行日期:11/04版本:01制造商:ABB Automatio n Products GmbHDran sfelder Str. 237079 Götti nge n, Germa ny 电话:+49 (0) 55 19 05- 0传真:+49 (0) 55 19 05- 777© Copyright 2004 by ABB Automation Products GmbHWe reserve the right to tech ni cal ame ndme nts. 本文档有版权保护.本文档中的信息仅用于帮助用户对设备进行安全有效的操作.没有版权所有者的书面批准不得全部或部分复制其内容.2 FCM2000 D184B111U021基本安全信息和使用方法1基本安全信息和使用方法1.1基本安全信息1.1.1仪表安全标准􀁺本仪表符合压力设备规范以及最新技术的安全要求。
本仪表已根据安全要求通过工厂测试，并根据正确的订单发货。
为使仪表在操作过程中仍符合安全指标，必须遵守本操作手册中列出的要求。
􀁺；请注意关于防暴设计的仪表启动的特别信息，在本手册第七章。
􀁺仪表符合EN61326/NAMUR NE21的电磁兼容（EMC 要求及低电压指示。
􀁺对于尺寸直到DN100（ 4”）的科里奥利质量流量计有防水外壳可选项，流量计传感器的最大工作压力为PS= 40bar （外壳的爆炸压力为PS>60bar）。
在压力设备指示的可用范围内本保护设计不会失效。
􀁺当供电中断发生时，仪表参数存储在一个括最新的累积值）中。
(整理)E+H涡街流量计操作说明.
1．电磁流量计PROMAG50 2. 80F调试说明3．溶解氧COM223/COM253 4．CPM223/CPM253 ORP5.超声波测量仪FMU 23X6.压力变送器PMP717.在线测量浊度仪CUE21 8．在线COD测量仪9.雷达FMR245 10.继电器（模数转换）RTA42111.72F调试说明12.重锤料位计FMM5013.DTT31质量流量计PROMAG50 电磁流量计一、参数设置10W调试说明1.仪表上电稳定后，按“E”键进入菜单组，出现“Group Select”Measuring Values2.按“+”或“-”,找到“Unit V olume Flow”，可用“+/-”键和“E”键确认体积流量单位，输入10，最后按“E”键确认；3.显示“Unit V olume Flow”，可用“+/-”键和“E”键确认质量流量单位；“m³/h”8.“Unit Totalizer”, 可用“+/-”键和“E”键确认累计值单位；“M³”10.“+”“-”同时按返回，再按“+”或“-”找到“Current Output ”按“E”，选择输出“4—20mA Hart Namur”,再按“E”，用“+、-”输入20mA对应的值，按“E”确认；11.按“E”到“Failsafe Mode”,按“+”或“-”，选择“Max current value”，及报警时输出最大电流值；12.同时按“+”“-”返回到“Current Output 1”，再按“+”或“-”找到“ProcessParameter”，按“E”，将“On-value low flow cut off”设置小流量切除值，一般的设置范围为20mA对应值的1%到5%；80F调试说明4.仪表上电稳定后，按“E”键进入菜单组，出现“Group Select”Measuring Values5.按“+”键两次出现“Quick Setup”，按“E”键进入，出现“Setup Commission”；No6.按“+”或“-”，输入80，最后按“E”键确认；7.重新出现Setup Commission”，按“+”键改为“Yes”，按“E”键确认；No8.显示“Language”选择语言为英语，按“E”键确认，如需选其它语言先用“+”“-”键选择再用“E”键确认；9.显示“Pre-setting”,按“E”键确认；“Act-setting”10.显示“Unit Mass Flow”，可用“+/-”键和“E”键确认质量流量单位；“Kg/h”8.“Unit Totalizer”, 可用“+/-”键和“E”键确认累计值单位；“Kg”9.“Configuration other Unit?”，可用“+/-”键和E键，选择“No”;10.“+”“-”同时按返回到“Quick Setup”菜单，再按“+”或“-”找到“Current Output 1”按“E”，选择输出“4—20mA Hart Namur”,再按“E”，用“+、-”输入20mA对应的值，按“E”确认；11.按“E”到“Failsafe Mode”,按“+”或“-”，选择“Max current value”，及报警时输出最大电流值；12.按“E”返回到“Current Output 1”，再按“+”或“-”找到“ProcessParameter”，按“E”，将“Assign cutoff”选为“Mass flow”,按“E”键，在“On-value low flow cut off”设置小流量切除值，一般的设置范围为20mA对应值的1%到5%；Liquisys COM223/COM253溶解氧调试方法一、调试:(1) 操作说明 :下面对各个操作键进行说明：CAL键：标定，激活标定模式，标定菜单显示。
质量流量计简明使用手册
P/N2007年7月简明使用手册目录第一章传感器安装 (3)1.1概述 (3)1.2安装注意事项 (3)1.3传感器的安装方向 (4)1.4电气连接注意事项 (5)第二章仪表接线与上电 (6)2.1概述 (6)2.2变送器的型号识别。
(6)2.3变送器与传感器连接 (7)2.4最大布线距离 (8)2.5电源规格 (9)2.6变送器、显示组件方向调整 (10)2.7变送器输出 (12)第三章流量计组态 (15)3.1概述 (15)3.2组态项目 (15)3.3变送器的显示器面板结构 (16)3.4组态过程变量的测量单位 (16)3.5组态变送器的毫安输出 (17)3.6组态变送器的脉冲/频率输出 (17)3.7变送器的回路测试 (18)3.8 显示器菜单功能 (3)3.9流量计调零 (27)第四章流量计投用及报警状态 (28)4.1流量计投用 (28)4.2获取报警 (28)附录1报警代码含义表 (29)附录2核心处理器检查 (34)附录3传感器检查 (35)附录4软件版本4.x变送器的显示器菜单 (37)第一章传感器安装1.1 概述相对于其他类型的流量计，质量流量计具有安装简便、易于使用、测量精度高以及直接质量测量等优点，尤其是没有直管段要求的特点，用户可因地制宜的选择安装位置，节约安装成本。
1.2 安装注意事项1.2.1 安装位置应避免电磁干扰。
传感器、变送器的安装位置以及电缆铺设应尽量远离易产生强电磁场的设备，如大功率马达、变压器设施、变频设备等。
1.2.2 工艺管道应对中，两侧法兰应平行。
严禁用传感器硬行拉直上、下游工艺管道，否则将影响测量甚至损坏传感器。
另外在两侧的工艺管道近法兰处（约2～10倍管径处）应有稳固的支撑。
1.2.3 在传感器的上、下游管道上，建议安装截止阀及旁路以方便调零、日常维护及确保传感器在不工作时亦可处于满管状态。
使用流量计下游的调节阀进行流量控制。
1.2.4 在测量易汽化介质时，流量计下游建议安装压力表，供检查下游压力，流量计后建议工艺管与流量计保持同口径一段距离，以及流量计后有阀门可以用以调节适当的背压，防止汽化或气穴发生。
E+H质量流量计操作一览表
UNIT LENGTH
UNIT PRESSURE
温度单位
长度单位
压力单位
QS COMMISSION
初始化
LANGUAGE
ACCESS CODE
DEFINE PRIVATE CODE STATUS ACCESS
ACCESS CODE
语言
密码
私人密码
查看状态密码
累加器密码
ASSIGN LINE 1
ASSIGN LINE 2
8 CURRENT OUTPUT 1/2 电流输出
9 PULS./FREQ.OUTP. 脉冲/频率输出
MASS FLOW
VOLUME FLOW
CORR.VOL. FLOW
DENSITY
质量流量
体积流量
标况体积流量
密度
REFERENCE DENSITY
TEMPERATURE
参考密度
温度
UNIT. MASS FLOW
18 SENSOR VERSION 传感器版本
19 AMPLIFIER VERS. 放大板硬件版本
SERIAL NUMBER 系列号 DEVICE SOFTWARE 软件版本
SENSOR TYPE 模拟测量变量 SW REV.AMPLIF.
SW REV.S-DAT 变量值 LANGUAGE GROUP 语言组
EPE LOW VALUE EPD下限
ZERO PT.ADJ. 零点标定 PRESSURE MODE 压力模式
FLOW DAMP. 流量阻尼系数 TEMP.COEFF.KM 2 温度系数KM2 DENSIYT COEFF.C1 密度系数C1 MIN.MEAS.TEMP. 最低测得温度
ASSIGN PROC.ERR. 选择工艺错误的变量 PERMANENT
KROHNE FMG7 0B Series 磁导化流量传感器操作手册说明书
FMG70B SeriesMagnetic Inductive Flow Sensor- 2 -M-5575/0416Table of contents page 0About this operating manual (4)1Device description (5)1.1Delivery, unpacking and accessories (5)1.2Intended use (6)1.3Exclusion of liability (6)2Safety instructions (7)3Construction and function (8)4Installation of FMG70B (9)4.1Installation instructions (9)4.2Mounting (10)5Electrical connection (11)5.1Wirings (12)6Commissioning and measuring mode (13)6.1Commissioning (13)6.2Switching on and off (13)6.3Measuring mode (13)7Maintenance and cleaning (15)7.1Return shipment to the manufacturer (15)8Disassembly and disposal (16)9Technical data (17)9.1Characteristics FMG70B (17)9.2Materials table (18)9.3Pressure drop (18)9.4Temperature limits (19)9.5Dimensions (20)Copyright notice:The reproduction, distribution and utilization of this operating manual as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.Technical changes reserved - 3 -About this operating manual- 4 - M-5575/04160 About this operating manual• The operating manual is aimed at specialists and semi-skilled personnel.• Before each step, read through the relevant advice carefully and keep to the specified order.•Thoroughly read and understand the information in the section "Safety instructions".If you have any problems or questions, please contact your supplier or contact us directly at:One Omega Drive, P.O. Box 4047Stamford, CT 06907-0047 Tel: (203) 359-1660 e-mail:**************Hazard signs and other symbols used:WARNING! / CAUTION! Risk of injury!This sign indicates dangers that cause personal injuries that can lead to health defects or cause considerable damage to property.CAUTION! Electric current!This sign indicates dangers which could arise from handling of electric current.CAUTION! Material damage!This sign indicates actions which could lead to possible damage to material or environmental damage.ADHERE TO OPERATING MANUAL! NOTICE!This symbol indicates important notices, tips or information. NO DOMESTIC WASTE!The device must not be disposed of together with domestic waste.Pay attention to and comply withinformation that is marked with this symbol.Follow the specified instructions and steps.Adhere to the given order.❑Check the specified points or notices.Reference to another section, document orsource. • Item.Device descriptionTechnical changes reserved - 5 -1 Device descriptionThe FMG70B series from Omega, is a non-contact flow sensor. The measurement is performed using magnetic induction and works without any moving parts.The FMG70B is used for measuring or metering water and aqueous solutions. The compact design and independence from the intake and discharge sections allows the FMG70B to be used under a variety of conditions.Versions ∗:The FMG70B is available with inner diameters 0.39 in narrows to 0.16 in, 0.39 in and 0.79 in.The versions can be configured differently (♑ FMG70B data sheet).Type plate:The type plate sticker is located at the bottom side of the FMG70B.It contains the most important data, the connection diagram and the arrow for the flow direction (Example ♑ Fig.).1.1 Delivery, unpacking and accessoriesAll units have been carefully checked for their operational reliability before shipment.❒ Immediately after receipt, please check the outer packaging for damages or any signs ofimproper handling.❒ Report any possible damages to the forwarder and your responsible salesrepresentative. In such a case, state a description of the defect, the type and the serial number of the device.Report any in-transit damage immediately. Damage reported at a later date shall not be recognized. Unpacking:Carefully unpack the unit to prevent any damage.Check the completeness of the delivery based on the delivery note. Scope of delivery:❒ 1x FMG70B as ordered.❒1x Operating manual. ❒ 1x Packing.∗Customised versions available on request.Device description- 6 - M-5575/0416IMPORTANT!Use the type plate to check if the delivered unit corresponds to your order.In particular, for devices with electrical components, check to see if the correct power supply voltage is specified.Accessories:❒ Connection cable with moulded M12x1 couplingsocket.❒ M12x1 coupling socket as component.1.2 Intended useThe magnetic inductive flow sensor FMG70B must only be used for measuring and metering liquids with a minimum conductivity of 50 μS/cm.WARNING! No safety component!The magnetic inductive flow sensor of the series FMG70B is not safety components in accordance with Directive 2006-42-EC (Machine Directive). Never use the FMG70B as a safety component.The operational safety of the device supplied is only guaranteed by intended use. The specified limits (♑ § 9 "Technical data") may under no circumstances be exceeded.Before installing the device, check that the wetted materials of the device are compatible with the media being used (♑ § 9.2 "Materials table").Measuring tube empty (or partially filled). / Conductivity too low.The green LED may blink irregularly if the measuring tube of the FMG70B is empty or partially filled or if the conductivity of the fluid being used is too low. Random impulses will be present at the output, but they do not represent an actual flow.Ensure that the measuring tube of the FMG70B is always completely filled (♑ § 4.1 "Installation instructions").Ensure that the conductivity of the fluid is at least 50 μS/cm.1.3Exclusion of liabilityWe accept no liability for any damage or malfunctions resulting from incorrect installation, in-appropriate use of the device or failure to follow the instructions in this operating manual.Safety instructionsTechnical changes reserved - 7 -2Safety instructionsBefore you install the FMG70B, read through this operating manual carefully. If the instructions contained within it are not followed, in particular the safety guidelines, this could result in danger for people, the environment, and the device and the system it isconnected to.The FMG70B correspond to the state-of-the-art technology. This concerns the accuracy, the operating mode and the safe operation of the device.In order to guarantee that the device operates safely, the operator must act competently andbe conscious of safety issues.Omega provides support for the use of its products either personally or via relevant literature. The customer verifies that our product is fit for purpose based on our technical information. The customer performs customer- and application-specific tests to ensure that the product issuitable for the intended use. With this verification all hazards and risks are transferred to our customers; our warranty is not valid.Qualified personnel:The personnel who are charged for the installation, operation and maintenance of the FMG70B must hold a relevant qualification. This can be based on training or relevanttuition.The personnel must be aware of this operating manual and have access to it at all times.The electrical connection should only be carried out by a fully qualified electrician. General safety instructions:In all work, the existing national regulations for accident prevention and safety in the workplace must be complied with. Any internal regulations of the operator must also becomplied with, even if these are not mentioned in this manual. Degree of protection according to EN 60529:Please ensure that the ambient conditions at the site of use does not exceed the requirements for the stated protection rating ( § 9 "Technical data").Prevent freezing of the medium in the device with appropriate measures.Only use the FMG70B if it is in perfect condition. Damaged or faulty devices must be checked without delay and, if necessary, replaced.When fitting, connecting and removing the FMG70B use only suitable appropriate tools. Do not remove or obliterate type plates or other markings on the device, as otherwise the warranty is rendered null and void. Special safety instructions:Warnings that are specifically relevant to individual operating procedures or activities can be found at the beginning of the relevant sections of this operating manual.Construction and function- 8 - M-5575/04163 Construction and functionComponents:① Housing:The housing consists of aluminum die casting and has the IP65 degree of protection.② Electrical connection:The electrical connection is made via 5-pin plug M12x1.③ Operation / flow indicator LED.④ Process connection:The process connections are available in different sizes.⑤ Type plate (sticker).Construction:The measuring tube with its earthing sleeves and electrodes passes through the housing and forms the external process connection of the FMG70B.A magnetic field for the measurement process is generated inside the sensor housing, which also contains the sensor and signal conditioning circuitry.The two stainless steel electrodes are located in the middle of the measuring tube between the earthing sleeves. The FMG70B does not need any moving parts to make measurements. The inside of the measuring tube is completely open, allowing the fluid to flow unhindered through the measuring tube.Function:The magnetic inductive flow sensor operates in accordance with the principle of induction, i.e. a DC voltage is generated by the movement of a conductor in a magnetic field:The measuring tube of the FMG70B is located in a magnetic field (B).An electrically conductive liquid (Q) flows through the measuring tube. The positive and negative charge carriers are deflected in opposite directions. A voltage perpendicular to the magnet field is generated and picked up by the two electrodes. The resulting induced voltage is proportional to the mean flow velocity of the liquid.The electronics of the FMG70B converts the induced voltage to a flow-proportional frequency signal.Installation of FMG70BTechnical changes reserved- 9 -4 Installation of FMG70BBefore installing, check that❒ the wetted materials of the device are suitable for the liquid being used ( § 9.2"Materials table").❒ the equipment is switched off and is in a safe and de-energized state. ❒ the equipment is depressurized and has cooled down.SUITABLE TOOLS:Use only suitable tools of the correct size.4.1 Installation instructionsCAUTION! Risk of malfunction due to external magnetic fields!Magnetic fields close to the device can cause malfunctions and should be avoided.Ensure that no external magnetic fields are present at theinstallation site of the FMG70B.•The FMG70B can always be installed anywhere along the pipeline. Straight sections of piping are preferable, however.Installation of FMG70B- 10 - M-5575/0416• Installation can occur in horizontal and vertical pipes. The flow sensor is only suitable for application in completely filled pipe systems.•As a matter of principle magnetic inductive flow sensors are widely independent from the flow profile. An inlet section is not absolutely necessary.To reach a most highly accuracy of the measurement, you should use straight inlet and outlet sections according to the inner diameter. The inlet section has to be at least10 x inner diameter; the outlet section 5 x inner diameter in order to achieve the specified accuracy.• The inlet and outlet sections and gaskets must have the same or a slightly larger inside diameter than the measuring tube in order to achieve the specified accuracy.4.2 MountingThe FMG70B is installed directly into the pipeline. The compact design and light weight of the unit make wall-mounting unnecessary.IMPORTANT NOTICES:• Observe the flow direction indicated on the FMG70B.• Observe the mounting dimensions (♑ § 9.5 "Dimensions").Select an appropriate location for installation (♑ § 4.1"Installation instructions").To ensure the best possible measuring accuracy, a vertical installation position with increasing flow is preferable (no collecting of dirt deposits).Wrap the FMG70B connections with 1 to 2 wraps of threadtape (e.g. Teflon ® tape).Wrap tape in a clockwise direction, viewed form the end, leaving the first two threads uncovered.Make sure the tape does not intrude into the flow path.Attach the FMG70B with arrow pointed in the direction of flow. The fittings should be screwed into FMG70B hand tight.CAUTION! Material damage!Do not use excessive force. The FMG70B can be damaged.While tightening, counter the union nut on the hexagon of the process connection!If you do not counter it, the FMG70B can be damaged!Use two wrenches to tighten the FMG70B an additional ¾ to 1 turn.When tightening, use a wrench (AF 1.063 or AF 1.338) to counter the process connection on the hexagon (flange) in place.Electrical connection5 Electrical connectionThe electrical connection of the FMG70B is via the 5-pin plug M12x1 at the top of the housing.The wiring of the FMG70B depends on the ordered version. A distinction is made between frequency and analog output, as well as basic and optional wiring.CAUTION! Electric current!The electrical connection should only be carried out by a fully qualified electrician. De-energize the electrical system before connecting the FMG70B.CAUTION! Material damage and fire hazard!Exceeding the specified limits will cause damage to the electronics. Without current limiting, there is a fire hazard due to overheating of the device. Connect the FMG70B only to a power source with limited power.Optional wirings:Depending on the version, an analog output can be optionally connected.Connecting cable:Suitable connection cables with molded coupling socket are available in various lengths included in the range of Omega accessories. The shielding is already connected with the knurled nut.IMPORTANT! Shielding required!Use only shielded connection cables.The shield of the connection cable should not be connected to earth.We recommend to ground the pipes directly before and behind the FMG70B (♑ Figure).IMPORTANT NOTICE:Pay attention to the temperature resistance of the connecting cable (♑ § 9 "Technicaldata") at high media temperatures.If the temperature resistance is smaller than the medium temperature, the cable may notbe directly laid on the pipe.Connection 5-pin plug M12x1:Screw the coupling socket of the connection cable to the plug of the FMG70B. Tighten the knurled nut of the coupling socket with a maximum torque of 1 Nm.Electrical connection5.1 WiringsPinout:The pinout differs according to the chosen configuration of the device.M12x1Possible pinout: Pin 1: +U BPin 2: n. c. (not connected) / Analog U/I Pin 3: GNDPin 4: FrequencyPin 5: n. c. (not connected) / d. n. c. (do not connect)Connect the connecting cable according to your version and the pinout on the type plate.Supply voltage:FMG70B with frequency output:Push-Pull *1:NPN Open Collector:PNP Open Collector:*1: Push-Pull switching outputs of several FMG70B may not be connected in parallel. *2: Recommendation Pull-Up / Pull-Down resistance R L ~5 k ΩUse of frequency and analog output:Recommendation for resistance R ~5 k ΩCommissioning and measuring mode6 Commissioning and measuring modeBefore switching on the FMG70B for the first time, please follow the instructions in the following section.6.1 CommissioningCheck that❒the FMG70B has been installed correctly and that all screw connections are sealed.❒the electrical wiring has been connected properly.❒the measuring system is vented by flushing.6.2 Switching on and offThe FMG70B has no switch and can therefore not be switched on and off independently. Switching on and off takes place via the connected supply voltage.Switch on the supply voltage.goes into measuring operation.6.3 Measuring modeIn measuring mode, the green LED flashes proportional to the measured flow.frequency of ~30 ... 40 Hz.In that case the green LED seems to be lit permanently.The following subsections only apply to devices which have the correspondent functionality.ing subsections only apply to devices which have the correspondent functionality.FMG70B with frequency output:The FMG70B provides according to the version a flowproportional NPN, PNP or Push-Pull square wavesignal.The frequency of the pulse output changes accordingto the flow ( Fig.).Commissioning and measuring mode FMG70B with analog output:According to the configuration of theFMG70B, the analog output provides a voltage or current signal.This signal is proportional to the measured flow.Maintenance and cleaning7 Maintenance and cleaningMaintenance:The FMG70B is maintenance-free and cannot be repaired by the user. In case of a defect, the device must be replaced or sent back the manufacturer for repair.CAUTION! Material damage!When opening the device, critical parts or components can be damage. Never open the device and perform any repair yourself.Cleaning:Clean the FMG70B with a dry or slightly damp lint-free cloth. Do not use sharp objects or aggressive agents for cleaning.7.1 Return shipment to the manufacturerDue to legal requirements placed on environmental protection and occupational safety and health and to maintain the health and safety of our employees, all units returned to Omega for repair must be free of toxins and hazardous substances. That also applies to cavities in the devices. If necessary, the customer must neutralize or purge the unit before return to Omega.Costs incurred due to inadequate cleaning of the device and possible costs for disposal and/or personal injuries will be billed to the operating company.WARNING! Risk of injury due to insufficient cleaning!The operating company is responsible for all damages and harm of any kind, in particular physical injuries (e.g. caustic burns or toxic contaminations), decontamination measures, disposal etc. that can be attributed to insufficient cleaning of the measuring instrument. Please follow the instructions for sending in returns shown on page 23 of this manual.The following measures must be taken before you send the unit to Omega for repair:Clean the device thoroughly. This is of extreme importance if the medium is hazardous tohealth, i.e. caustic, toxic, carcinogenic or radioactive etc.Remove all residues of the media and pay special attention to sealing grooves and slits. Attach a note describing the malfunction, state the application field and thechemical/physical properties of the media.Please specify a point of contact in case our service department has any questions.Disassembly and disposal8 Disassembly and disposalCAUTION! Risk of injury!Never remove the device from a plant in operation.Make sure that the plant is shut down professionally.Before disassembly:Prior to disassembly, ensure that❒ the equipment is switched off and is in a safe and de-energized state. ❒ the equipment is depressurized and has cooled down. Disassembly:Remove the electrical connectors.Remove the FMG70B using suitable tools.Disposal:NO HOUSEHOLD WASTE!The FMG70B consists of various different materials. He must not be disposed of with household waste.Take the FMG70B to your local recycling plantTechnical data9 Technical dataThe technical data of customized versions may differ from the data in these instructions. Please observe the information specified on the type plate.9.1 Characteristics FMG70B*2 factory setting.*3 other range on request.Technical datathe FMG70B.9.2 Materials table9.3 Pressure dropFMG71B and FMG72B: FMG73B:Technical data 9.4 Temperature limitsThe maximum ambient temperature depends on the medium temperature and the version of the FMG70B.Technical data9.5 DimensionsFMG71B and FMG72B:¾'' NPT only for FMG72B.The cross section of the FMG72B does not taper to 0.16 in.FMG73B:For your notes For your notesFor your notesFor your notesM-5575/0416。
涡街流量计 电子版本： ER 2.0.0_ OPTISWIRL 4200 操作手册说明书
涡街流量计电子版本： ER 2.0.0_OPTISWIRL 4200操作手册© KROHNE 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh保留所有权。
未经KROHNE Messtechnik GmbH 公司事先书面授权，不得复制此文件及其任何部分。
如有更改，恕不通知。
2 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh版权所有 2017KROHNE Messtechnik GmbH - Ludwig-Krohne-Str. 5 - 47058 Duisburg (德国): 版本说明3 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh 1 安全须知61.1 软件历史 (6)1.2 用途 (7)1.3 认证 (9)1.4 压力容器指令 (10)1.5 来自制造厂家的安全须知 (11)1.5.1 版权及数据保护.............................................................111.5.2 免责条款...................................................................111.5.3 产品责任及质保.............................................................121.5.4 有关文档的信息.............................................................121.5.5 警告与符号使用 (13)1.6 操作者的安全须知........................................................132 设备描述142.1 供货范围 (14)2.2 仪表型号 (14)2.2.1 法兰型仪表.................................................................152.2.2 夹持型仪表.................................................................152.2.3 双测量系统型号和加倍的可靠性...............................................162.2.4 分体型.....................................................................162.2.5 带内缩径的仪表.............................................................172.2.6 设备描述...................................................................172.2.7 自由空气排气量检测 - FAD (可选)...........................................182.2.8 总热测量（可选）...........................................................192.2.9 净热测量（可选）...........................................................202.2.10 双密封 (21)2.3 铭牌....................................................................223 安装233.1 安装注意事项 (23)3.2 存储 (23)3.3 运输 (23)3.4 安装条件 (24)3.4.1 测量液体时应严禁的安装.....................................................253.4.2 测量蒸汽和气体时应严禁的安装...............................................263.4.3 带控制阀的管线.............................................................263.4.4 推荐安装位置 (27)3.5 最小进口直管段 (28)3.6 最小出口直管段 (29)3.7 整流器 (29)3.8 安装 (30)3.8.1 安装注意事项...............................................................303.8.2 夹持型仪表的安装...........................................................313.8.3 法兰型仪表的安装...........................................................323.8.4 分体型现场外壳的安装 (33)3.9 隔热层 (34)3.10 转动机壳 (35)3.11 旋转显示板 (36)内容4 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh4 电气连接374.1 安全须知 (37)4.2 连接信号转换器 (38)4.3 电气连接 (39)4.3.1 电源.......................................................................394.3.2 电流输出...................................................................394.3.3 电流输入...................................................................404.3.4 二进制输出.................................................................404.3.5 限位开关输出...............................................................414.3.6 脉冲输出 / 频率输出........................................................434.3.7 状态输出 (44)4.4 分体型的接线............................................................444.5 接地连接. (46)4.6 防护等级................................................................475 启动485.1 开机界面. (48)5.2 操作....................................................................486 操作496.1 显示和操作按键 (49)6.1.1 子菜单和功能选择的显示，3行 (50)6.1.2 参数设置的显示，4行 (51)6.1.3 预览参数时的显示，4行 (51)6.2 基本操作原理 (52)6.2.1 按键功能描述...............................................................526.2.2 从测量模式切换到菜单模式...................................................526.2.3 更改菜单中的设置...........................................................526.2.4 更改模式下的字符...........................................................536.2.5 单位，数字和常数...........................................................546.2.6 安全等级和权限 (54)6.3 最重要的功能及模块概览 (56)6.4 菜单语言 (56)6.5 气体测量选项 (57)6.6 单位 (58)6.7 菜单结构 (61)6.7.1 菜单”A 快速设置“ (61)6.7.2 菜单“B 测试” (62)6.7.3 菜单“C 设置” (64)6.7.4 菜单说明 “A 快速设置” (68)6.7.5 菜单说明 "B 测试" (75)6.7.6 菜单说明 ”C 设置“ (76)6.8 设置示例 (85)6.8.1 自由空气排气量检测-FAD 设置 (85)6.8.2 总热测量 (86)6.8.3 净热测量 (87)6.9 状态消息和诊断信息 (88)6.10 A12 分区检查 (92)5 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh 7 服务937.1 更换信号转换器/液晶显示屏 (93)7.2 O 型圈的维护 (94)7.3 备件可用性 (95)7.4 可提供的服务 (95)7.5 仪器送返生产厂家........................................................957.5.1 基本信息. (95)7.5.2 送返仪器时附带的表格（可复印） (96)7.6 处理....................................................................968 技术数据978.1 功能原理 (97)8.2 技术数据 (98)8.3 尺寸和重量 (103)8.3.1 法兰型 (103)8.3.2 夹持型 (110)8.3.3 分体型尺寸 (112)8.4 流量表 (113)16 08/2017 - 4004294802 - MA OPTISWIRL 4200 R04 zh1.1 软件历史对于所有仪表，根据 NE 53，“电子版本” (ER) 记录了电子设备版本状态。
科里奥利质量流量计（变送器部分）简明操作指南说明书
Products Solutions Services简明操作指南流量计Proline 500Modbus RS485科里奥利质量流量计（变送器部分）本文档为《简明操作指南》，不能替代设备随箱包装中的《操作手册》。
设备的《简明操作指南》由两部分组成：变送器的《简明操作指南》（第二部分）包含变送器信息。
传感器的《简明操作指南》（第一部分）→ 3KA01318D/28/ZH/03.22-00715819942022-08-01流量计 Proline 5002Endress+Hauser流量计 Proline 500流量计的《简明操作指南》Endress+Hauser 3流量计的《简明操作指南》仪表由一台变送器和一个传感器组成。
流量计的《简明操作指南》包含《传感器简明操作指南》和《变送器简明操作指南》，分别介绍了变送器和传感器调试操作：•第一部分：《传感器简明操作指南》•第二部分：《变送器简明操作指南》需要同时参照上述两本《简明操作指南》进行流量计调试，它们配套使用，互为补充：《传感器简明操作指南》（第一部分）《传感器简明操作指南》的文档对象是负责测量仪表安装的专业人员。
•到货验收和产品标识•储存和运输•安装《变送器简明操作指南》（第二部分）"《变送器简明操作指南》的文档对象是负责进行测量仪表调试、组态设置和参数设置的专业人员(直至获取第一个测量值)。
"•产品描述•安装•电气连接•操作方式•系统集成•调试•诊断信息其他设备文档本文档为《变送器简明操作指南》（第二部分）。
《传感器简明操作指南》（第一部分）的获取方式：•网址：/deviceviewer•智能手机/平板电脑：Endress+Hauser Operations App 详细设备信息参见《操作手册》和其他文档资料：•网址：/deviceviewer•智能手机/平板电脑：Endress+Hauser Operations App目录流量计 Proline 5004Endress+Hauser目录1文档信息 (5)1.1信息图标 (5)2安全指南 (7)2.1人员要求............................................................................72.2指定用途............................................................................72.3工作场所安全.........................................................................82.4操作安全............................................................................82.5产品安全............................................................................82.6IT 安全.............................................................................92.7设备的IT 安全........................................................................93产品描述 (10)4安装 (11)4.1安装变送器外壳......................................................................114.2旋转变送器外壳......................................................................134.3旋转显示模块........................................................................144.4盖板锁定...........................................................................154.5变送器的安装后检查..................................................................165电气连接 (17)5.1电气安全...........................................................................175.2接线要求...........................................................................175.3连接测量设备........................................................................215.4确保电势平衡........................................................................305.5硬件设置...........................................................................305.6确保防护等级........................................................................305.7连接后检查.........................................................................316操作方式 (32)6.1操作方式概述........................................................................326.2操作菜单的结构和功能.................................................................336.3通过现场显示单元访问操作菜单..........................................................346.4通过调试软件访问操作菜单.............................................................376.5通过Web 服务器访问操作菜单..........................................................377系统集成 (37)8调试 (38)8.1功能检查...........................................................................388.2设置显示语言........................................................................388.3设置测量设备........................................................................388.4写保护设置，防止未经授权的访问........................................................399诊断信息 (39)流量计 Proline 500文档信息1 文档信息1.1 信息图标1.1.1 安全图标危险状况警示图标。
D07 – 20 型 防爆型质量流量控制器 D07–20M 型 防爆型质量流量计 使用手册说明书
D07 – 20 型防爆型质量流量控制器D07–20M型防爆型质量流量计使 用 手 册2 0 0 7 . 8目录1. 用途和特点........................... 1 4.7 MFC/MFM与计算机直接连接. (10)2. 主要技术指标........................ 2 5．使用方法和操作步骤 (11)3. 结构和工作原理..................... 3 6．注意事项 (12)3.1 结构.................................... 3 7. 故障判断和处理 (14)3.2 工作原理.............................. 3 8. 保证、保修与服务 (16)4. 安装和接线 ........................ 6 8.1 产品保证和保修.. (16)4.1 外形及安装尺寸..................... 6 8.2 保修对使用的要求.. (16)4.2 气路接头形式........................ 6 8.3 服务.. (16)4.3 接地要求..............................7 9. 附录 (17)4.4接线图.................................7 9.1备件汇总表 (17)4.5 电缆的连接...........................7 9.2气体质量流量转换系数 (18)4.6 调零.................................... 8 9.3转换系数使用说明 (20)MASS FLOW CONTROLLER & MASS FLOW METER质量流量流量控制器和质量流量计使 用 手 册1. 用途和特点质量流量计 (Mass Flow Meter 缩写为 MFM) 用于对气体的质量流量进行精密测量；质量流量控制器 (Mass Flow Controller 缩写为 MFC) 用于对气体的质量流量进行精密测量和控制。
E+H质量流量计中文说明书
BA057D/06/zh/06.0550098468PROline promass80科氏力质量流量测量系统操作指南简明操作指南该操作指南指导您对测量仪表进行快速简便的设定安全指南第页7安装第页31接线第页13第页23显示和操作单元使用“快速设定”进行调试QUICK SETUP ()第页50您可使用“快速设定”菜单对测量仪表进行快速、方便的调试，使用现场显示设置基本功能，如显示语种、测量变量、变量单位、信号种类等以下功能可单独实现（如需要）：－零点校正－密度校正－电流输出设置（有源无源）QUICK SETUP()/用户专用设置复杂测量操作需要某些附加功能，您可以借助于功能矩阵进行设置，并将其用户化以满足您的测量过程需要提示：所有功能的详细描述，请查阅“”手册功能描述提示：如在调试后或操作过程中出现故障，请启动故障诊断，见第页诊断清单，找出故障原因以及相应的排障措施。
61第页52主显示页快速设定初始化质量流量E E语言预设定体积流量标准体积流量密度温度退出质量流量单位体积流量单位密度单位温度单位累积器单位累积器单位参考密度单位参考密度值设定其他单位？选择系统单位是否测量模式选择输出模式电流输出1电流输出2频率/脉冲输出退出操作模式频率脉冲电流对应变量电流对应变量电流范围电流范围0/4mA 对应值20mA 对应值时间常数失效模式0/4mA 对应值20mA 对应值时间常数频率对应变量频率上限频率下限频率上限值输出信号时间常数脉冲对应变量脉冲当量脉冲宽度输出信号失效模式失效模式设定其他输出？是否自动设定显示是否自动设定显示参数失效模式标准体积流量单位快速设定提示：快速设定菜单的详细信息，尤其是不带现场显示仪表的操作，请查阅第页。
50·在参数输入过程中按ES C 键，返回QU I CK S ET U P CO MM I SS I O N ，所设定的参数值有效·在进行以下快速设定前必须启动“快速设定”功能·①对当前设定中未设置的单位进行选择，在相应的流量单位中选择质量流量、体积流量、标准体积流量单位·②保持“Y E S ”选项，直到所有单位设置完成“N O ”选项表示没有需要设置的单位·③只对当前设定中未设置的输出进行选择·④保持“Y E S ”选项，直到所有输出设置完成“N O ”选项表示没有需要设置的输出·⑤“参数化显示”包含下列基本设定/出厂设定：YE S :第一行＝质量流量；第二行＝累积量1；NO :保持现有的设定提示：正确使用安装、调试和操作操作安全返修安全规范和图标名称变送器铭牌传感器铭牌标志，一致性声明注册商标收货确认、运输和储存收货确认运输储存安装条件尺寸安装位置安装方向伴热保温进出口直管段振动限流安装指南旋转变送器外壳墙挂式变送器安装旋转现场显示模块安装后的检查分离型仪表的连接传感器的连接电缆规格测量单元的连接变送器的连接端子分配连接防护等级接线后的检查显示和操作单元功能矩阵简明操作指南注意事项激活编程模式禁止编程模式错误信息通信操作选项仪表和过程变量1．安全指南．标识．．．7....................................................2 (9)1.1...............................................................71.2..........................................71.3...............................................................71.4.....................................................................81.5. (8)2.1 (9)2.1.1...................................................92.1.2.................................................102.2CE ....................................102.3.............................................................113.1.. (13)3.1.1....................................................133.1.2............................................................133.1.3............................................................143.2. (14)3.2.1.............................................................143.2.2....................................................143.2.3....................................................163.2.4............................................................183.2.5............................................................193.2.6.............................................193.2.7............................................................193.2.8............................................................193.3 (20)3.3.1.........................................203.3.2......................................213.3.3.......................................223.4......................................................224.1. (23)4.1.1..............................................234.1.2....................................................244.2. (25)4.2.1.............................................254.2.2....................................................274.2.3HART .................................................284.3......................................................294.4....................................................305.1.............................................315.2.. (32)5.2.1......................................................335.2.2............................................335.2.3............................................335.3.......................................................345.4. (35)5.4.1....................................................355.4.2 (36)仪表3.................................................................134...................................................................235...................................................................31安装接线操作目录5.4.3/HART .................375.4.4/..................................436.1...................................................496.2. (49)6.2.1..........................................496.2.2....................................506.2.3.................................................526.2.4.................................................546.2.51/.............................556.2.62/............................566.2.7..............................579.1............................................619.2............................................629.3............................................679.4.............................699.5..............................................709.6........................................................729.7.............................739.8....................................779.9...................................................78.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................通用型普通应用型指令仪表状态错误信息功能检测调试测量仪表上电快速设定“调试”零点校正密度校正电流输出：有源无源电流输出：有源无源吹扫和压力监测连接故障诊断指南系统错误信息过程错误信息无显示信息的过程错误输出响应错误备品备件更换和安装印刷线路板仪表保险丝的更换软件版本6.................................................................497................................................................588................................................................599.......................................................6110.....................................................调试维护附件故障诊断技术参数一览应用功能和系统设计输入输出供电性能特性操作条件机械结构用户接口认证订货信息附件相关文件尺寸；墙挂式变送器尺寸：不锈钢现场变送器技术参数8110.18110.1.18110.1.28110.1.38110.1.48310.1.58310.1.68410.1.78810.1.89710.1.910010.1.1010010.1.1110010.1.1210110.1.1310110.210210.310210.4（P r om a s s F ,M ,A,H ,I ）....10310.5尺寸：分离型（P r om a s s E ）10310.6尺寸：分离伴热型10310.7尺寸：高温型（一体化型）10410.8尺寸：高温型（分离型）10410.9尺寸：Pr o ma ss F 10510.10尺寸：Pr o ma ss M 11510.11尺寸：Pr o ma ss E 12910.12尺寸：Pr o ma ss A 13810.13尺寸：Pr o ma ss H 14410.14尺寸：Pr o ma ss I 146尺寸：分离型.....................................................................................................................................................................................................................................................................................................................................................................................1安全指南1.1正确使用PR Ol in e P ro ma s s 8系列流量计用于测量液体和气体的质量流量，同时也可测量流体密度和温度。
克罗尼流量计说明书
50mm，不包括密封垫的尺寸。
产品的可靠性和质量担保
H250金属管浮子流量计适用于测量蒸汽、气体和液体的体积流量。 特殊的代码和规则可应用于防爆场所。 操作人员应严格按照仪表的规定使用。 我公司对因错误安装和操作流量计引起的质量问题不作担保。 另外，订货合同以“一般销售条件”为基础。 如果流量计须返回承德热河克罗尼仪表有限公司维修，请参见本手册39页。 产品执行标准：Q/CRK 022-2012
M9指示器附加部件
9 限位开关Kmin, Kmax, k2 概述.............................. 21
9.1 电气连接 ......................... 21 9.2 限位点设置....................... 22 9.3 限位开关K的确定 ............... 23 9.4 技术参数 ......................... 23 10 电信号输出ESK2A(HARTTM)
2
H250安装操作指导
目
H250流量计,机械指示器
1 H250流量计的安装 1.1 安装要求............................ 5 1.2 管道准备............................ 5 1.3 管道安装............................ 5 2 启动 2.1 液体的测量.......................... 8 2.2 气体的测量.......................... 8 3 流量表 3.1 H250/RR,H250/ 哈氏合金C4 ...... 9 3.2 H250/ 陶瓷 .........................10 3.3 H250 H .............................11
E+H密度计说明书(中文版)
PROline promass 80科氏力质量流量测量系统功能描述BA 058D/28/zh 50098512目录1Proline Promass 8.0功能表 (5)2测量值..................................................................73系统单位...............................................................84快速设定菜单.........................................................135操作.....................................................................156人机界面...............................................................177累加器1/2............................................................208累加器操作 (229)电流输出 (23)10脉冲/频率输出.........................................................2911状态输出 (38)12状态输入...............................................................4213通信.....................................................................4414工艺参数...............................................................4515系统参数...............................................................4916传感器数据............................................................5217信息管理...............................................................5418系统模拟...............................................................5619传感器版本............................................................5720放大板版本............................................................5721出厂设定 (58)1.151.2611.14011.24121.1/5821.259功能表、结构和使用功能表图示状态输出的反应信息状态输出的动作国际单位（不适用于美国加拿大）美制单位（仅适用于美国/加拿大）…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………注册商标HA RTHA RT 通讯基金会注册商标，奥斯丁.美国S DA T ，T D AT ，F -Ch ip E+H 瑞士流量厂注册商标，Re in c h.瑞士--TM TMT M1Proline Promass 80功能表1.1功能表：结构和使用功能表是两层的结构：组群是第一层，功能块是第二层。
E+H质量流量计说明书
简明操作指南Proline Promass 83科氏力质量流量测量系统本《简明操作指南》不能替代供货范围中的《操作手册》。
详细信息请参考《操作手册》以及随附CD上的其他文档。
完整的设备文档包括：•《简明操作指南》•与仪表型号相符的相关文档：–《操作手册》和《仪表功能描述》–防爆证书及安全证书–安全指南 - 与仪表型号相关(例如防爆证书、压力设备指令等)–其他相关信息KA00024D/06/ZH/13.1171106927目录Proline Promass 83目录1 安全指南. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.1 用途 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2 安装、调试和操作 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.3 操作安全 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.4 安全图标 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.1 运往测量点 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.2 安装条件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.3 安装变送器外壳. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.4 安装后检查 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 接线 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123.1 不同外壳类型的仪表连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133.2 防护等级 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143.3 连接后检查 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 硬件设置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154.1 PROFIBUS DP/PA、MODBUS RS485通信的设备地址 . . . . . . . . . . . . . . . . . . . . . . 154.2 以太网/IP网络中的设备地址 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.3 终端电阻 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 调试 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195.1 开启测量设备 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195.2 运行 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205.3 浏览功能表 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215.4 调用快速设定 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225.5 软件设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.6 故障排除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 2Endress+HauserProline Promass 83安全指南1安全指南1.1用途•测量设备仅可用于测量液体和气体的质量流量。
80系列质量流量计简明操作手册
再按 进入菜单，按 键找到 PULS/FREQ.OUT 脉冲输出菜单，进入仿真，仿真前把脉冲宽度修改成 1S,便 于观察。仿真结束后 SIMULATION PULSE：OFF，脉冲宽度恢复原先数值。 输入密码：0080，也可以直接输入“80” ，当从左向右数第三个“*”号变成回车键后按“E”确认就可。
输入密码:0080，修改量程
口径mm
满量程值(液体)
8 3/8" 0-2000 kg/h
15 1/2" 0-6500 kg/h
25 1" 0-18000 kg/h
40 11/2" 0-45000 kg/h
50 2" 0-70000 kg/h
80 3" 0-180000 kg/h
100 4" 0-350000 kg/h
1、
该资料仅供参考，若有异议，请以随设备附带的操作手册为准
80系列质量流量计启动显示和按键操作说明
操作按键 1. 用于输入、选择减号(-) 键 2. 用于输入、选择加号(+) 键 3. 用于调用功能表、保存的回车键 当同时按下+/- 键时(Esc)： • 逐步退出功能表： • > 3 s = 取消数据输入并返回到测量值显示
修改累积流量单位
累积流量累积模式
累积流量复位
密码：0080 累积流量单位
修改成：YSE 复位
重新确认复位
该资料仅供参考，若有异议，请以随设备附带的操作手册为准
80系列质量流量计量程范围设置
按键控制 同时按 时按 键， 键 键并保持 3 秒以上直接回到主显示页位置，同 键步步退出功能矩阵到主显示页位置，同时按 键取消数据输入。
按 进入菜单，再按 键找到 CURRENT OUTPUT（电流输出）。 输入密码：0080，也可以直接输入“80” ，当从左向右数第三个“*”号变成回车键后按“E”确认就可。
D07-9E型质量流量控制器和质量流量计使用手册说明书
D07 - 9E 型质量流量控制器D07- 9EM型质量流量计使 用 手 册版本2015. 12目录1. 使用须知................................... 1 6.2.1 开机预热.. (18)2. 用途和特点................................ 2 6.2.2 检查和调整零点. (18)3. 主要技术指标............................. 3 6.2.3 通气工作. (18)4. 结构和工作原理.......................... 5 6.2.4 关机. (18)4.1 结构....................................... 5 7. 注意事项.. (18)4.2 工作原理................................. 6 7.1 禁用流量介质 (18)5. 安装和接线 .............................8 7.2 使用腐蚀性气体问题 (18)5.1 外形及安装尺寸........................8 7.3 阀口密封问题 (19)5.2 气路接头形式...........................9 7.4 阀控操作注意 (19)5.3 连接电缆插头...........................11 7.5 安装位置问题 (19)5.4 与计算机信号的连接..................13 7.6 注意工作压差 (19)5.5 调零和外调零...........................15 7.7 标定和不同气体的换算 (19)6. 使用方法和操作步骤..................16 7.8 D07-9E, 9EM标准订单填写格式 (20)6.1 质量流量控制器的操作...............16 8. 故障判断和处理.. (23)6.1.1 开机操作...............................16 9. 保证、保修与服务.. (25)6.1.2 清洗功能...............................17 9.1 产品保证和保修.. (25)6.1.3 显示仪与计算机连接的操作.......17 9.2 保修对使用的要求.. (25)6.1.4 直接与计算机连接的操作..........17 9.3 服务.. (25)6.1.5 阀控功能...............................17 10. 附录 (26)6.1.6 关机操作...............................17 10.1 气体质量流量转换系数.. (26)6.2 质量流量计的操作....................18 10.2 转换系数使用说明.. (28)MASS FLOW CONTROLLER & MASS FLOW METER质量流量控制器和质量流量计使 用 手 册 1. 使用须知尊敬的用户，感谢您购买本公司生产的D07系列质量流量控制器/质量流量计产品。
质量流量计使用说明书
2.4仪表的通电和检查22
2.5常见故障的维护22
第三章变送器的设置22
3.1功能设置22
3.1.1用户菜单密码22
3.1.2系统菜单密码23
3.1.3测量单位的选择23
3.1.4小数点位数的选择23
3.2仪表面板24
3.3操作界面24
第四章防爆31
4.1防爆系统的原理31
4.2防爆性能31
4.3防爆性能试验31
附录:RS485通讯协议32
第一章概述
质量流量计是根据科里奥利（Coriolis Force）原理，实现流体质量流量的直接精密测量，而无需任何压力、温度、粘度、密度等换算或修正。其结构是由传感器单元和变送器单元两部分组成。仪表按本质安全防爆型的国家标准设计与制造，防爆标志为Exdib[ib]IIBT5
1.1工作原理 ：
当一个位于以P点为旋转中心做旋转运动的管子的质点做朝向或远离旋转中心的运动时，将产生一贯性力，原理如图1:
图1
图中质量为δm的质点以匀速v围绕一个固定点P并以角速度ω旋转的管道移动时，这个质点将获得两个加速度分量：
1.法向加速度αr（向心加速度），其量值值等于ω2r，方向朝向P点；
795
860
220
-6C
100
780
490
760
855
920
270
-6D
150
900
730
930
1080
1180
300
1.3.3技术指标
瞬时流量精度±0.20%流量±[(零点稳定性/流量值)×100]%流量
响应时间出厂1秒（用户可以调整）
时流量标准精度曲线
密度测量精度±0.002g/cm³
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
-
!"# RHExx 30
-
!"#$%$& RHM
!" 15
!"#$%&'(
!"#$%&'
-
!"#$%
!"#
!"#
:
!"#$%&' /
-
!"#$%&'()
03
!"#$%
-
!"#
!"
!"#$% RHM015!"
-:
!"
!"#$%&'
!"#$%
-
!
!"#$
!"#$%&'(!)*
!"
-
!"#$%&'()*+,- !"#$%&'
!"#$%&'(
!"#$%&'()*+,
!RHE07/08
!"#$%& '!()*+
!"#$%&
RHE11(
)
!"# 1 2
!"#
!"#$ RHM(
!")
!"#$%&'()*
!"#$%&
0
12
RHE
!" 7
!"#$%&'()*
!2
!"#$%&'()*+
1.2. RHM
!"#$%
!"#$% RHM
!"#$%&'()*+,-./0123
Page 9
RHEONIK Messgeräte GmbH
2004 4
!
!"# Rheonik
!
a)
!-
!"#$
! -20 C .. + 70 C
b)
!"#$%& -
!"#$
80 100 160
!"# $
c)
!-
!"#$
! -20 C .. + 205 C
!"25
!
!"#$ RHM60
RHM xx NT ETx
! : service@rheonik.de
!"#$%& http://www.rheonik.de
! RHE 07, 08, 11
Page 5
RHEONIK Messgeräte GmbH
2004 4
!
1.
!"#$
1.1.
!"#
RHEONIK
!"#$ RHM
!"#$%&' RHE
!"#$%
!
RHE07/08
!"#$%
RHE
!"#$%&
!"#
EC -
!"
2004 4
!
Page
33 33 34 35 35
36
! RHE 07, 08, 11
Page 3
RHEONIK Messgeräte GmbH
2004 4
!
RHE/RHM
!"#$%&'(
!"#$%&'()*+,
•
!"
!"#$%&'(
!"#$%&'()*+,-./0
!"#$%&'
!"MM03 MIO03
!
!"#
!"#$%&'()*
!"#
!"#$%&'():
!"#$ /
>
!
<
!
*
<
!
! RHE 07, 08, 11
Page 12
RHEONIK Messgeräte GmbH
2004 4
!
!"#!$%
!"#$%&'()*+,-
3
!
!"# $%&'()*
!"#$%&$'($)
RHM
! RHE
!"#$%
!"#$%&'()*
!"#$%&'()%*+,-./0
1.5.
!"#$
!"# RHE
!"#$#%& 230VAC, 115VAC 24VDC
!" RHE
!"#$%
!"#$
! " 10%
!"#$%&'(!)*+,-./012!3456
!"#$%& RHE
!"#$%&'
!"#$%&'( )*+,-./
!"#
!
!
!
!"#
!"#$%&'()
!"#$%&'()*
2.1.3.
!
!"#$%&'()*!+,-./01/234
2.1.3.1.
!
!"#$%&
!"#$%
•
!"#$%
•
!"#$%&'()*+,
•
!"#$%&'()*+,
! RHE 07, 08, 11
Page 14
RHEONIK Messgeräte GmbH
2004 4
!
!"#$%&' RHM
!"#$%&'()*+,-./012$%3)*4
!"#$%&'()*+,-./0
•
! RHE
!"#$%&'()*+,-./0123456
•
!"#
! 100%
! RHM
! 15
!"#$%&'
•
!"#$%&'()*+,-
!"#$%&'()*+,-./0
!
!" #$
!"#$%&'()*+,-#./01
14 15 15 16
17 18
19 20 21 22 23
24 24 25
28
30
30 32
Page 2
RHEONIK Messgeräte GmbH
6.
!"#$
6.1.
6.2.
RHE07/08/11
!"
6.3.
!"
6.4.
!"
6.5.
!"#$%&'
7.
RHMxx, RHE07,08,11
!"
RHE
2.1.2.
!"#$%&
!"#$%&'(
!"#$%&'(
!"#$%&'(!)*$ +,
!
!
!"#
! RHE 07, 08, 11
Page 13
RHEONIK Messgeräte GmbH
2004 4
!
!"#$%
+-
!" Next
!"#
!"#$%&'()
!"#$%&'()'*+
!"#$%&
!"# Next
2004 4
!
Rheonik
!"#$%
!"#
!"#$%&
RHM
!" RHM XX
-
!"#$%&'()*+,
-
!"#$%&'()*+,-
-
-
!"#$%&'#()*)+
-
!"#$%&'() !"#
!"#$
!"# !"#
-
!" RHEXX
:
!"
!
!"#$%&
!
!"#$%&&'(
-
!"#$%& !"#$
:
!"#$%&' /
'()*+,-.
!"#$%&'&()*+ ,-"#.
!"#$%&
!"#$%&'()*+,-./012)*+345
!"#$%&'()*+,-./$012