连接器类产品规格书样板

产品规格书样板PRODUCT SPECIFICATION TITLE:
PART NO:
REVISION:
P/N: REVISION:RELEASE DATE:
PREPARED:CHECKED: APPROVED:
REVISION HISTORY:
1.0. SCOPE
This product specification covers performance, tests and quality requirements for When tests are
performed on subject product line, procedures specified in Figure 1 shall be used. All inspections shall be performed using the applicable product drawing.
2.0. APPLICABLE DOCUMENTS
P/N: REVISION:RELEASE DATE:
PREPARED:CHECKED: APPROVED:
The following documents form a part of this specification to the extent specified herein. Unless otherwise specified, the latest edition of the document applies. In the event of conflict between the requirements of the specification and the product drawing, the product drawing shall take precedence. In the event of
conflict between the requirements of this specification and the referenced documents, this specification
shall take precedence.
2.1. APPLICABLE DOCUMENTS AND SPECIFICATIONS
EIA-364
SS-00259.
3.0.REQUIREMENTS
3.1. Standard atmospheric condition:
Unless otherwise specified, the standard range of atmospheric condition for marking, measurement and tests is as follows:
Ambient temperature:
Relative humidity:
Air pressure:
3.2. Temperature:
Operating:
Storage:
3.3. Ratings
Voltage:
Current:
3.4. Dimension
See applicable product drawing
3.5. Material, plating and markings
3.5.1. Housing Dielectric Material:
Polymer type: High Temp Plastic
Color: BLACK
UL94 flammability rating: UL94-V0
3.5.2. Contact Material /Plating
Base metal alloy:
Contact surface condition:
Contact surface plating material:
Underplate material:
P/N: REVISION:RELEASE DATE: PREPARED:CHECKED: APPROVED:
Solder tail plating material:
4.0. Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Future 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per EIA-364
P/N: REVISION:RELEASE DATE: PREPARED:CHECKED: APPROVED:
P/N: REVISION:RELEASE DATE:
PREPARED:CHECKED: APPROVED:
Figure-1
(a).Shall meet visual requirements show no physical damage and shall meet requirements of additional tests as
specified in Test Sequence in Figure-2.
P/N: REVISION:RELEASE DATE: PREPARED:CHECKED: APPROVED:
Figure-2
P/N: REVISION:RELEASE DATE:
PREPARED:CHECKED: APPROVED:
6.0. Environment Protection
6.1. For this part, a ban is placed on the use of the materials that include the substances specified in
SS-00259 PART 1. Refer to the SS-00259 PART 1 for the details of use prohibition parts or
exclusion items.
(1) Cadmium and its compounds
(2) Lead and its compounds Mercury and its inorganic compounds
(4) Hexavalent chromium compoundsPoly chlorinated biphenyls (PCB) Poly chlorinated
terphenyls(PCT) Poly chlorinated naphthalenes (PCN)
(8) Chlorinated paraffins(CP)
(9) Other chlorinated organic compounds Polybrominated biphenyls(PBB)
(11) Polybromo diphenyl ethers(PBDE)
(12) Other brominated organic compounds
(13) Organo tin compounds (Tri butyl tin/Tri phenyl tin)(TBT/TPT) Asbestos
(15) Formaldehyde
(16) Poli vinyl chloride and poli vinyl chloride blends (PVC) Specific Azo compounds (The human body
contact portion of the product made on the
assumption that a human body was touched continuously)
(18) Fluoro hydro carbon(FHC)and hydrofluorocarbon(PFC)
6.2. In the process which manufactures this part, a ban is placed on the use of the substances
specified in SS-00259 PART 1
6.2.1. Ozone depleting substances (ODS)
Specific Freon: CFC-11,12,13,111,112,113,114,115
211,212,213,214,215,216,217
1. 1. 1-trichloroethane
Carbon tetrachloride
Halon – 1211,1301,2402
Methyl bromide
6.2.2. Chlorined organic solvent
6.3. For this part, a ban is placed on the use of the materials that emits formaldehyde exceeding the
concentration specified in SS-00259 Part-1*.
6.4. In order to guarantee having satisfied the 1.2.3rd clause, submit a certificate of non-use at the
time of part approval.
SS-00259 Part1:
P/N: REVISION:RELEASE DATE:
PREPARED:CHECKED: APPROVED:
MANAGEMENT REGULATIONS FOR THE RESTRICTIVELY-USED SUBSTANCES INCLUDED IN PARTS AND DEVICES。