皮带式升降机驱动说明书

摘要

升降机在工业生产中是一种重要的运输设备，在涂装车间以及其他行业都有广泛的应用，它是工业生产中实现连续化、自动化、现代化必不可少的设备。涂装车间升降机的作用是把不同高度的车身输送至指定高度，以满足整个涂装输送设备的连续运行和车身持续性生产。此次进行了涂装车间的皮带升降机传动部分设计。皮带升降机传动装置由框架、轴、驱动滚筒、联轴器等其他标准件组成。升降机上升下降一般由皮带传动，升降皮带一端与配重相连，另一端与升降机相连，皮带安装于升降机驱动滚筒上，利用皮带与滚筒间的摩擦力带动升降机运行。

关键词：升降机；涂装车间；皮带；驱动滚筒

Abstract

The lift is an important transport equipment in industrial production，are widely used in paint shop and other industries，it is continuous，automatic，indispensable to the modernization of the equipment to realize industrial production. Elevator painting workshop is the role of the different height of the vehicle body conveying to a specified height，to meet the continuous operation and body whole coating and conveying equipment of continuous production. The belt elevator driving part design of painting workshop. Belt elevator driving device comprises a frame，a shaft，a driving roller，shaft coupling and other standard parts. Lift the rise and fall of general by belt，lifting belt end is connected with the counterweight，and the other end of the elevator is connected，the belt is installed on the elevator drive roller，with the friction between the belt and the roller drives the elevator operation.

Keywords: Elevator; painting workshop; belt drive roller;

目录

摘要 (1)

Abstract (2)

目录 (3)

第一章绪论 (4)

1.1 课题背景及研究意义 (4)

1.2 升降机国内研究现状 (5)

1.3 升降机国外研究现状及发展趋势 (7)

1.4 本文研究内容 (8)

第二章皮带升降机动力机构设计 (10)

2.1 皮带升降机概述 (10)

2.2 升降机重要部件特点 (11)

2.3 动力系统选择依据 (11)

2.4 动力计算 (12)

2.5 动力选型 (12)

第三章皮带升降机驱动系统设计 (14)

3.1 常见机构的特点和应用.....................................................................错误!未定义书签。

3.2 传动机构及皮带类型选择.................................................................错误!未定义书签。

3.3 驱动滚筒设计.....................................................................................错误!未定义书签。

3.3.1驱动滚筒最小直径的确定.......................................................错误!未定义书签。

3.3.1驱动滚筒轴直径的确定...........................................................错误!未定义书签。

3.3.2幅板厚度的确定.......................................................................错误!未定义书签。

3.3.3驱动滚筒轴直径的确定...........................................................错误!未定义书签。

3.3.4滚筒厚度的确定.......................................................................错误!未定义书签。

3.3.5驱动滚筒壳和滚筒轴的数控加工工艺...................................错误!未定义书签。第四章带传动校核....................................................................................错误!未定义书签。

4.1 带传动的主要失效形式.....................................................................错误!未定义书签。

4.2 带传动的承载能力.............................................................................错误!未定义书签。总结..................................................................................................................错误!未定义书签。参考文献............................................................................................................错误!未定义书签。致谢....................................................................................................................错误!未定义书签。