尼凯恩NX(neken NX)联通版终端参数
U-NICA NGN智能网介绍 ISSUE1.0
U-NICA系统能够满足运营商最关心的3个需求 如下：
与NGN相关的特色业务 第三方业务开发的解决方案 希望采用系统平滑扩展的方案来保护已有投资
华为机密，未经许可不得扩散
文档密级：内部公开
本章总结
本章介绍了NGN网络整体层次结构 分析了U-NICA系统在NGN网络中的位置 给出了市场对NGN网络及下一代智能网的需求分析
SMS的作用？
请了解NGN网络中4个层次中包含的主要设备
情况。
请了解U-NICA系统对外协议接口。
华为机密，未经许可不得扩散
文档密级：内部公开
解答
略（请参考《U-NICA NGN智能网 技术手册》 给出答案）
华为机密，未经许可不得扩散
文档密级：内部公开
本章总结
在本章介绍了U-NICA系统的体系结构，并给出了NGN
Media Resource Server 3rd Party Application Server 网络管理系统 Short Message Service Center
华为机密，未经许可不得扩散
文档密级：内部公开
网络控制层
Soft Switch是NGN网络控制层的核心设备。它采用软交换技术，
除了直接提供丰富的固网基本电信业务、补充业务以外，还可以
PGW
Standard Parlay API
IN
SIP INAP Over M3UA
Third Party AS
PSTN/ PLMN
SG
华为机密，未经许可不得扩散
网络层
Soft Switch
文档密级：内部公开
业务应用层
AS PGW SMS Application Server PARLAY Gateway Service Management Server
采购编号
呼伦贝尔市公安局PDT数字集群设备清单
四载频基站（5套）
序号
设备名称
品牌/规格型号
设备描述
数量
单位
1
信道机
海能达/CHU621
CHU 信道机
4
块
2
3分集接收软件包
海能达/
3分集接收软件包
4
套
3
基站控制单元
海能达/BSC621
BSCU 基站控制器
2
块
4
基站控制软件
海能达/
BSCU 基站控制器软件
1
台
10
四载频机柜
海能达/CAB621
四载频机柜组件(含EIB接口板、线材、结构)
1
台
11
全向高增益玻璃钢天线361-366MHz
TQJ-350C
全向高增益玻璃钢天线(含自制配件) 361-366M 增益9dBi 垂直极化 阻抗50欧姆 双节 驻波比≤1.5 N(母)形接头
1
根
12
全向高增益玻璃钢天线351-356MHz
WIN 2008 32位
1
套
二、链路设备清单
序号
设备名称
型号
设备名称
数量
单位
1
IP路由器
AR0M1510BA00
IP路由器
23
台
三、网管系统设备清单
序号
设备名称
型号
设备名称
数量
单位
1
网管终端（PC）
7020
网管终端（PC）
1
台
2
网管终端软件
/
网管终端软件
1
套
四、调度系统设备清单
NMO-L3参数配置
NMO-L3参数配置
详细参数
品牌：友信达型号：NOMI 3 机身内存：16GB
运行内存：2GB 存储卡类型：TF卡最大存储扩展：32GB 屏幕尺寸：5.0英寸屏幕材质：IPS 闪光灯类型：支持
变焦模式：数码变焦传感器类型：CMOS 颜色：黑色
重量：120克手机操作系统：Android 系统版本：4.4
CPU型号：2.0 CPU核数：八核SIM卡尺寸：标准卡,Micro SIM （小卡）
4G网络制式：移动4G 3G网络制式：移动3G 2G网络制式：移动2G/联通2G
网络频率：900/1800 待机模式：双卡单模电池更换：支持
耳机接口：3.5mm 重力传感器：支持光线传感器：支持
距离传感器：支持陀螺仪：支持运营商标识：在外包装,在机身。
Lenovo ThinkSystem NE10032O RackSwitch 产品说明书
Lenovo ThinkSystem NE10032O RackSwitchProduct Guide (withdrawn product)The Lenovo ThinkSystem NE10032O RackSwitch that uses 100 Gb QSFP28 and 40 Gb QSFP+ Ethernet technology is designed for big data, cloud, and enterprise workloads in the data center. The switch delivers line-rate, low-latency, and high-bandwidth switching, while providing high availability for business sensitive traffic with the hot-swap redundant power supplies and fans.The NE10032O RackSwitch has 32x QSFP+/QSFP28 ports that support 40 GbE and 100 GbE optical transceivers, active optical cables (AOCs), and direct attach copper (DAC) cables. The QSFP+/QSFP28 ports can also be split out into two 50 GbE (for 100 GbE ports), or four 10 GbE (for 40 GbE ports) or 25 GbE (for 100 GbE ports) connections by using breakout cables.The NE10032O RackSwitch is shown in the following figure.Figure 1. Lenovo ThinkSystem NE10032O RackSwitchDid you know?With exceptional port density and flexibility with break-out cables, the NE10032O RackSwitch can support up to 128x 10 GbE / 25 GbE Ethernet connections, or a mix of 10 GbE / 25 GbE server and storage connections with 40 GbE or 100 GbE upstream network connections, or up to 32x 40 GbE / 100 GbE connections in a 1U rack form factor.The NE10032O RackSwitch includes the Open Network Install Environment (ONIE) which is an open, standards-based boot code that provides a deployment environment for loading certified ONIE networking operating systems onto networking devices.Click here to check for updatesFigure 2. Front panel of the NE10032O RackSwitchThe front panel of the NE10032O RackSwitch includes the following components:32x QSFP+/QSFP28 ports to attach QSFP+/QSFP28 transceivers, DAC cables and AOCs for 40 Gb or 100 Gb Ethernet connections or breakout cables for 4x 10 Gb Ethernet connections out of a40 GbE port, or 2x 50 GbE or 4x 25 GbE connections out of a 100 GbE port.One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.One RJ-45 RS-232 console port that provides another means to configure the switch.One Micro-USB Type B RS-232 console port that provides another means to configure the switch.Figure 3. Rear panel of the NE10032O RackSwitchThe rear panel of the NE10032O RackSwitch includes the following components:Two redundant hot-swap 770 W AC power supplies (each with the IEC 320-C14 power connector).Six N+1 redundant hot-swap fan assemblies.Description Part number code quantity Lenovo 5m 100G QSFP28 to 4x25G SFP28 Breakout DAC Cable7Z57A03566AV2432 QSFP+ transceivers - 40 GbELenovo 40GBase QSFP+ Bi-Directional Transceiver00YL631ATYW32 Lenovo 40GBASE-SR4 QSFP+ Transceiver49Y7884A1DR32 Lenovo 40GBASE-iSR4 QSFP+ Transceiver00D9865ASTM32 Lenovo 40GBASE-eSR4 QSFP+ Transceiver00FE325A5U932 Lenovo 40GBASE-LR4 QSFP+ Transceiver00D6222A3NY32 Optical cables for 40 GbE QSFP+ SR4/iSR4/eSR4 transceiversLenovo 10m MPO-MPO OM3 MMF Cable00VX003AT2U32 Lenovo 30m MPO-MPO OM3 MMF Cable00VX005AT2V32OM3 optical cables for 40 GbE SR QSFP+ BiDi transceiversLenovo 0.5m LC-LC OM3 MMF Cable00MN499ASR532 Lenovo 1m LC-LC OM3 MMF Cable00MN502ASR632 Lenovo 3m LC-LC OM3 MMF Cable00MN505ASR732 Lenovo 5m LC-LC OM3 MMF Cable00MN508ASR832 Lenovo 10m LC-LC OM3 MMF Cable00MN511ASR932 Lenovo 15m LC-LC OM3 MMF Cable00MN514ASRA32 Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB32 Lenovo 30m LC-LC OM3 MMF Cable00MN520ASRC32OM4 optical cables for 10 GbE SR SFP+, 25 GbE SR SFP28, and 40 GbE SR QSFP+ BiDi transceiversLenovo 0.5m LC-LC OM4 MMF Cable4Z57A10845B2P932 Lenovo 1m LC-LC OM4 MMF Cable4Z57A10846B2PA32 Lenovo 3m LC-LC OM4 MMF Cable4Z57A10847B2PB32 Lenovo 5m LC-LC OM4 MMF Cable4Z57A10848B2PC32 Lenovo 10m LC-LC OM4 MMF Cable4Z57A10849B2PD32 Lenovo 15m LC-LC OM4 MMF Cable4Z57A10850B2PE32 Lenovo 25m LC-LC OM4 MMF Cable4Z57A10851B2PF32 Lenovo 30m LC-LC OM4 MMF Cable4Z57A10852B2PG32 Optical breakout cables for 40 GbE QSFP+ iSR4/eSR4 transceiversLenovo 1m MPO-4xLC OM3 MMF Breakout Cable00FM412A5UA32 Lenovo 3m MPO-4xLC OM3 MMF Breakout Cable00FM413A5UB32 Lenovo 5m MPO-4xLC OM3 MMF Breakout Cable00FM414A5UC32 QSFP+ active optical cables - 40 GbELenovo 3m QSFP+ to QSFP+ Active Optical Cable00YL652ATZ332 Lenovo 5m QSFP+ to QSFP+ Active Optical Cable00YL655ATZ432 Lenovo 7m QSFP+ to QSFP+ Active Optical Cable00YL658ATZ532 Lenovo 15m QSFP+ to QSFP+ Active Optical Cable00YL661ATZ632 Lenovo 20m QSFP+ to QSFP+ Active Optical Cable00YL664ATZ732 QSFP+ active optical breakout cables - 40 GbE to 4x10 GbELenovo 1m QSFP+ to 4xSFP+ Active Optical Cable00YL667ATZ832 Lenovo 3m QSFP+ to 4xSFP+ Active Optical Cable00YL670ATZ932Lenovo 5m QSFP+ to 4xSFP+ Active Optical Cable00YL673ATZA32QSFP+ direct-attach copper cables - 40 GbELenovo 1m Passive QSFP+ DAC Cable49Y7890A1DP32 Lenovo 3m Passive QSFP+ DAC Cable49Y7891A1DQ32 Lenovo 5m Passive QSFP+ DAC Cable00D5810A2X832 Lenovo 7m Passive QSFP+ DAC Cable00D5813A2X932QSFP+ breakout cables - 40 GbE to 4x 10 GbELenovo 1m Passive QSFP+ to SFP+ Breakout DAC Cable49Y7886A1DL32 Lenovo 3m Passive QSFP+ to SFP+ Breakout DAC Cable49Y7887A1DM32 Lenovo 5m Passive QSFP+ to SFP+ Breakout DAC Cable49Y7888A1DN32 Description Part number code quantity The network cables that can be used with the switch are listed in the following table.Table 4. NE10032O network cabling requirementsTransceiver Standard Cable Connector 100 Gb Ethernet100Gb SR4 QSFP28 (7G17A03539)100GBASE-SR4Up to 30 m with MPO-MPO fiber optic cables or up to 5 mwith MPO-4xLC breakout cables supplied by Lenovo (seeTable 3); up to 70 m with OM3 or up to 100 m with OM4multimode fiber optic cablesMPO100Gb LR4 QSFP28(7G17A03540)100GBASE-LR41310 nm single-mode fiber optic cable up to 10 km LCActive optical cable100GBASE-SR4QSFP28 to QSFP28 active optical cables up to 20 m;QSFP28 to 4x SFP28 active optical breakout cables up to20 m for 4x 25 GbE connections out of a 100 GbE port(see Table 3)QSFP28Direct attach copper cable 100GBASE-CR4QSFP28 to QSFP28 DAC cables up to 5 m; QSFP28 to4x SFP28 DAC breakout cables up to 5 m for 4x 25 GbEconnections out of a 100 GbE port (see Table 3)QSFP2850 Gb (2x 25 Gb) EthernetDirect attach copper cable 25G/50G Eth.ConsortiumQSFP28 to 2x QSFP28 DAC breakout cables (notsupplied by Lenovo)QSFP2840 Gb Ethernet40Gb SR QSFP+ BiDi (00YL631)40GBASE-SRBiDiUp to 30 m with fiber optic cables supplied by Lenovo(see Table 3); up to 100 m with OM3 or up to 150 m withOM4 multimode fiber optic cablesLC40Gb SR4 QSFP+ (49Y7884)40GBASE-SR410 m or 30 m MPO fiber optic cables supplied byLenovo (see Table 3); up to 100 m with OM3 or up to150 m with OM4 multimode fiber optic cablesMPO40Gb iSR4 QSFP+ (00D9865)40GBASE-SR410 m or 30 m MPO fiber optic cables or MPO-4xLCbreakout cables up to 5 m supplied by Lenovo (seeTable 3); up to 100 m with OM3 or up to 150 m with OM4multimode fiber optic cablesMPOThe following table lists the network switches with rear-to-front airflow that are offered by Lenovo that can be used with the NE10032O RackSwitch in network connectivity solutions for ThinkSystem, System x, and ThinkServer hosts.Table 8. Rack-mount network switches (rear-to-front airflow)Description Part number 1 Gb Ethernet switches (10 Gb uplink ports)Lenovo RackSwitch G7028 (Rear to Front)7159BAX Lenovo RackSwitch G7052 (Rear to Front)7159CAX Lenovo RackSwitch G8052 (Rear to Front)7159G5210 Gb Ethernet switchesLenovo ThinkSystem NE1032 RackSwitch (Rear to Front)7159A1X Lenovo ThinkSystem NE1032T RackSwitch (Rear to Front)7159B1X Lenovo ThinkSystem NE1072T RackSwitch (Rear to Front)7159C1X Lenovo RackSwitch G8124E (Rear to Front)7159BR6 Lenovo RackSwitch G8272 (Rear to Front)7159CRW Lenovo RackSwitch G8296 (Rear to Front)7159GR625 Gb Ethernet switchesLenovo ThinkSystem NE2572 RackSwitch (Rear to Front)7159E1X Lenovo ThinkSystem NE2572O RackSwitch (Rear to Front, ONIE)7Z210O21WWFor more information, see the list of Product Guides in the Top-of-rack Switches category:/servers/options/switches#rt=product-guideThe following table lists currently available embedded Ethernet switches and pass-thru modules that can be used with the NE10032O RackSwitch in network connectivity solutions for Flex System hosts.Table 9. Embedded Ethernet switches for Flex SystemDescription Part number 1 Gb Ethernet switches (10 Gb uplink ports)Lenovo Flex System EN2092 1Gb Ethernet Scalable Switch49Y429410 Gb Ethernet switches and modulesLenovo Flex System Fabric EN4093R 10Gb Scalable Switch00FM514 Lenovo Flex System SI4091 10Gb System Interconnect Module00FE327 Lenovo Flex System Fabric SI4093 System Interconnect Module00FM51825 Gb Ethernet switchesLenovo ThinkSystem NE2552E Flex Switch4SG7A08868 Pass-thru modules (10 GbE pass-thru connectivity)Lenovo Flex System EN4091 10Gb Ethernet Pass-thru88Y6043For more information, see the list of Product Guides in the Blade Network Modules category:/servers/blades/networkmodule#rt=product-guideThe following table lists the external storage systems that are currently offered by Lenovo that can be used with the NE10032O RackSwitch for external NAS or iSCSI SAN storage connectivity.Table 10. External storage systems: DE SeriesDescription Part number Worldwide JapanLenovo ThinkSystem DE Series Storage (iSCSI connectivity)Lenovo ThinkSystem DE2000H 10GBASE-T Hybrid Flash Array LFF7Y70A003WW7Y701001JP Lenovo ThinkSystem DE2000H 10GBASE-T Hybrid Flash Array SFF7Y71A002WW7Y711005JP Lenovo ThinkSystem DE2000H iSCSI Hybrid Flash Array LFF7Y70A004WW7Y701000JP Lenovo ThinkSystem DE2000H iSCSI Hybrid Flash Array SFF7Y71A003WW7Y711006JP Lenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array 4U607Y77A000WW7Y771002JP Lenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array LFF7Y74A002WW7Y74A002JP Lenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array SFF7Y75A001WW7Y75A001JP Lenovo ThinkSystem DE4000F iSCSI All Flash Array SFF7Y76A002WW7Y76A002JP Lenovo ThinkSystem DE6000H iSCSI Hybrid Flash Array 4U607Y80A002WW7Y801000JP Lenovo ThinkSystem DE6000H iSCSI Hybrid Flash Array SFF7Y78A002WW7Y781000JP Lenovo ThinkSystem DE6000F iSCSI All Flash Array SFF7Y79A002WW7Y79A002JPTable 11. External storage systems: DM SeriesDescription Part number Lenovo ThinkSystem DM Series Storage (NAS or iSCSI connectivity)Lenovo ThinkSystem DM3000H Hybrid Storage Array (2U12 LFF, CTO only)7Y42CTO1WW Lenovo ThinkSystem DM3000H 48TB (12x 4TB HDDs) (Universal SFP+)7Y420001EA* Lenovo ThinkSystem DM3000H 48TB (12x 4TB HDDs) (10GBASE-T)7Y420002EA* Lenovo ThinkSystem DM5000H Hybrid Storage Array (2U24 SFF, CTO only)7Y57CTO1WW Lenovo ThinkSystem DM5000H 11.5TB (12x 960GB SSDs) (Universal SFP+)7Y570001EA* Lenovo ThinkSystem DM5000H 11.5TB (12x 960GB SSDs) (10GBASE-T)7Y570002EA* Lenovo ThinkSystem DM5000H 29TB (24x 1.2TB 10K HDDs) (Universal SFP+)7Y570003EA* Lenovo ThinkSystem DM5000H 29TB (24x 1.2TB 10K HDDs) (10GBASE-T)7Y570004EA* Lenovo ThinkSystem DM5000F Flash Storage Array (2U24 SFF, CTO only)7Y41CTO1WW Lenovo ThinkSystem DM7000H Hybrid Storage Array (3U, CTO only)7Y56CTO1WW Lenovo ThinkSystem DM7000F Flash Storage Array (3U, CTO only)7Y40CTO1WW * Available only in EMEA.Table 12. External storage systems: DS SeriesDescription Part numberWorldwide Japan PRC Lenovo ThinkSystem DS Series Storage (iSCSI connectivity)Lenovo ThinkSystem DS2200 LFF FC/iSCSI Dual Controller Unit4599A314599A3J4599A3C Lenovo ThinkSystem DS2200 SFF FC/iSCSI Dual Controller Unit4599A114599A1J4599A1C Lenovo ThinkSystem DS4200 LFF FC/iSCSI Dual Controller Unit4617A314617A3J4617A3C Lenovo ThinkSystem DS4200 SFF FC/iSCSI Dual Controller Unit4617A114617A1J4617A1C Lenovo ThinkSystem DS6200 SFF FC/iSCSI Dual Controller Unit4619A114619A1J4619A1C DS6200F 12x 400GB 10DWD SSDs, 1x 8Gb FC SFP, 512 Snapshots, Replication4619A1F4619J1F4619C1F DS6200F 12x 800GB 3DWD SSDs, 1x 8Gb FC SFP, 512 Snapshots, Replication4619A2F4619J2F4619C2F DS6200F 12x 1.6TB 3DWD SSDs, 1x 8Gb FC SFP, 512 Snapshots, Replication4619A3F4619J3F4619C3F DS6200F 12x 3.84TB 1DWD SSDs, 1x 8Gb FC SFP, 512 Snapshots, Replication4619A4F4619J4F4619C4FTable 13. External storage systems: V Series and Storwize for LenovoDescription Part numberLenovo Storage V Series (iSCSI connectivity)Lenovo Storage V3700 V2 LFF Control Enclosure6535C1D Lenovo Storage V3700 V2 SFF Control Enclosure6535C2D Lenovo Storage V3700 V2 XP LFF Control Enclosure6535C3D Lenovo Storage V3700 V2 XP SFF Control Enclosure6535C4D Lenovo Storage V5030 LFF Control Enclosure 3Yr S&S6536C12 Lenovo Storage V5030 LFF Control Enclosure 5Yr S&S6536C32 Lenovo Storage V5030 SFF Control Enclosure 3Yr S&S6536C22 Lenovo Storage V5030 SFF Control Enclosure 5Yr S&S6536C42 Lenovo Storage V5030F SFF Control Enclosure 3Yr S&S6536B1F Lenovo Storage V5030F SFF Control Enclosure 5Yr S&S6536B2F Lenovo Storage V7000 SFF Control Enclosure 3Yr S&S PRC6538R11^ Lenovo Storage V7000 SFF Control Enclosure 5Yr S&S PRC6538R21^ Lenovo Storage V7000F SFF Control Enclosure 3Yr S&S PRC6538R1G^ Lenovo Storage V7000F SFF Control Enclosure 5Yr S&S PRC6538R2G^ IBM Storwize for Lenovo (iSCSI connectivity)IBM Storwize V7000 SFF Control Enclosure, 3YR SWMA6195C32†IBM Storwize V7000 SFF Control Enclosure, 3YR SWMA, LA6195C3L‡IBM Storwize V7000 SFF Control Enclosure, 5YR SWMA6195C52†IBM Storwize V7000 SFF Control Enclosure, 5YR SWMA, LA6195C5L‡^ Available only in PRC.† Available worldwide except Latin America.‡ Available only in Latin America.1U 9 C19/3 C13 Switched and Monitored 60A 3Ph PDU with IEC 309 3P+Gnd cord 46M40031U 12 C13 Switched and Monitored DPI PDU (without a line cord)46M40041U 12 C13 Switched and Monitored 60A 3 Phase PDU with IEC 309 3P+Gnd line cord 46M4005Ultra Density Enterprise PDUs (9x IEC 320 C13 + 3x IEC 320 C19 outlets)Ultra Density Enterprise C19/C13 PDU Module (without a line cord)71762NX Ultra Density Enterprise C19/C13 PDU 60A/208V/3ph with IEC 309 3P+Gnd line cord 71763NU C13 Enterprise PDUs (12x IEC 320 C13 outlets)DPI C13 Enterprise PDU+ (without a line cord)39M2816DPI Single Phase C13 Enterprise PDU (without a line cord)39Y8941C19 Enterprise PDUs (6x IEC 320 C19 outlets)DPI Single Phase C19 Enterprise PDU (without a line cord)39Y8948DPI 60A 3 Phase C19 Enterprise PDU with IEC 309 3P+G (208 V) fixed line cord 39Y8923Front-end PDUs (3x IEC 320 C19 outlets)DPI 30amp/125V Front-end PDU with NEMA L5-30P line cord 39Y8938DPI 30amp/250V Front-end PDU with NEMA L6-30P line cord 39Y8939DPI 32amp/250V Front-end PDU with IEC 309 2P+Gnd line cord 39Y8934DPI 60amp/250V Front-end PDU with IEC 309 2P+Gnd line cord 39Y8940DPI 63amp/250V Front-end PDU with IEC 309 2P+Gnd line cord 39Y8935Universal PDUs (7x IEC 320 C13 outlets)DPI Universal 7 C13 PDU (with 2 m IEC 320-C19 to C20 rack power cord)00YE443NEMA PDUs (6x NEMA 5-15R outlets)DPI 100-127V PDU with fixed NEMA L5-15P line cord 39Y8905Line cords for PDUs that ship without a line cord DPI 30a Line Cord (NEMA L6-30P)40K9614DPI 32a Line Cord (IEC 309 P+N+G)40K9612DPI 32a Line Cord (IEC 309 3P+N+G)40K9611DPI 60a Cord (IEC 309 2P+G)40K9615DPI 63a Cord (IEC 309 P+N+G)40K9613DPI Australian/NZ 3112 Line Cord (32A)40K9617DPI Korean 8305 Line Cord (30A)40K9618DescriptionPart number For more information, see the list of Product Guides in the Power Distribution Units category:/servers/options/pdu#rt=product-guideUninterruptible power supply unitsUninterruptible power supply unitsThe following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo that can be used with the NE10032O RackSwitch in IT solutions.Table 16. Uninterruptible power supply unitsDescription Part numberWorldwide modelsRT1.5kVA 2U Rack or Tower UPS (100-125VAC) (8x NEMA 5-15R 12A outlets)55941AX RT1.5kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A outlets)55941KX RT2.2kVA 2U Rack or Tower UPS (100-125VAC) (8x NEMA 5-20R 16A outlets)55942AX RT2.2kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 1x IEC 320 C19 16A outlets)55942KX RT3kVA 2U Rack or Tower UPS (100-125VAC) (6x NEMA 5-20R 16A, 1x NEMA L5-30R 24A outlets)55943AX RT3kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 1x IEC 320 C19 16A outlets)55943KX RT5kVA 3U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 2x IEC 320 C19 16A outlets)55945KX RT6kVA 3U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 2x IEC 320 C19 16A outlets)55946KX RT8kVA 6U Rack or Tower UPS (200-240VAC) (4x IEC 320-C19 16A outlets)55948KX RT11kVA 6U Rack or Tower UPS (200-240VAC) (4x IEC 320-C19 16A outlets)55949KX RT8kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC) (4x IEC 320-C19 16A outlets)55948PX RT11kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC) (4x IEC 320-C19 16A outlets)55949PX ASEAN, HTK, INDIA, and PRC modelsThinkSystem RT3kVA 2U Standard UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A outlets)55943KT ThinkSystem RT3kVA 2U Long Backup UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A outlets)55943LT ThinkSystem RT6kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)55946KT ThinkSystem RT10kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)5594XKTFor more information, see the list of Product Guides in the Uninterruptible Power Supply Units category: /servers/options/ups#rt=product-guideLenovo Financial ServicesTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Flex SystemLenovo ServicesRackSwitchSystem x®ThinkServer®ThinkSystem®The following terms are trademarks of other companies:Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Other company, product, or service names may be trademarks or service marks of others.。
ALU 产品手册
上海贝尔行业产品手册公司介绍阿尔卡特朗讯是全球领先的通信解决方案供应商，专注于IP网络、超宽带接入和云技术，致力于为全球的运营商、企业和政府机构提供更加灵活、快速、可靠的通信网络。
阿尔卡特朗讯旗下的贝尔实验室是全球最具活力的前沿技术研究机构之一，贡献了一大批奠定现代信息通信基础的创新发明。
贝尔实验室共获得８项诺贝尔奖，拥有14位诺贝尔奖获得者。
最近，阿尔卡特朗讯凭借一系列技术创新，获得国际机构的高度认可。
上海贝尔股份有限公司成立于1984年，是国务院国有资产监督管理委员会的直属企业，也是中国第一家外商投资股份制公司，拥有强大的本土实力和广泛的全球资源。
上海贝尔为运营商、企业和行业客户提供先进的信息通信解决方案和高质量的服务，其产品覆盖有线和无线方案、IP网络、光网络、光接入、云计算、网络核心及应用、网络管理及服务等诸多领域。
上海贝尔拥有贝尔实验室中国研究中心和数个重要的全球研发中心，可全面进入阿尔卡特朗讯全球技术库，开发服务于中国和阿尔卡特朗讯全球客户的独创技术，并且在多项新技术开发中居于主导地位。
上海贝尔拥有技术先进、制造能力达到世界一流水平的生产制造平台，公司销售服务网络遍及全国和海外50多个国家。
今天，上海贝尔已成为集世界一流的生产制造基地，全球重要的研发中心、采购和物流中心、信息服务中心以及上海贝尔大学于一体的阿尔卡特朗讯在全球的旗舰。
目录总体描述 (4)行业解决方案 (5)全业务传送网解决方案 (5)城域网解决方案 (8)骨干网解决方案 (9)数据中心网络解决方案 (10)数据中心互联/出口解决方案 (11)电力数据调度网与综合数据网解决方案 (12)专业DNS_DHCP_IPAM系统解决方案 (13)无源局域网解决方案（POL） (15)端到端L TE解决方案 (17)IMS/NGN解决方案 (19)产品系列 (21)光传送 (21)OTN/WDM 产品－1830 PSS系列产品 (21)PTN-1850 TSS系列产品 (23)MSTP系列产品 (24)微波传输 (25)中短距分组微波－9500 MPR系列产品 (25)长距微波－9600 LSY系列产品 (26)数据承载 (27)骨干/核心路由平台-7950 XRS (27)城域业务路由-7750 SR/7705 SAR (28)MES系列交换机 (30)软件定义网络– Nuage SDN (32)VitalQIP：面向IPv4、IPv6的下一代IP地址管理解决方案 (33)超宽带接入 (34)PON OL T局端设备－7360 ISAM FX (34)丰富的光终端（ONU）系列 (34)LTE无线产品 (37)业务核心网 (38)IMS产品 (38)NGN产品 (38)总体描述通信网的未来将会何去何从？企业期望应对动态的市场和客户需求，实施新的业务策略并开拓新的市场机会，今天的网络已经无法应对日益增长的海量数据，我们需要一个灵活敏捷、伸缩自如的人性化网络，基于IP的网络演进势在必行，而这一切必须以网络为基石。
OptiXOSN设备简介学习
波长(nm) 1310
标称传输 距离(Km) 0～2
2～20
1310 1550 1550
1310
1310 1550 1550 1310 1310 1310 1550 1550 1550 1550 1550 1550 1550 1310 1550 1550 1550 1550 1550 1550 1310 850
第10页/共17页
第十页，编辑于星期六：十一点 十四分。
OSN3500 对偶板位
条件
40G交叉容量
80G或200G交叉容 量
对偶槽位
（3，16）（4，15）（5，14）（6，13）（7，12）（8，11）
（2，17）（3，16）（4，15）（5，14）（6，13）（7，12）（8， 11）
只有互为对偶板、光口号相同的两个光口之间才能组复用段环。但若组共享复用段环的两个单板中有一
OSN3500配置 II
OSN3500配置 Ⅲ
GXCS
EXCS
UXCS
SXCS
40G（256×256 VC-4）80G（512×512 VC-4）80G（512×512 VC- 200G（1280×1280VC-4） 4）
5G(2016×2016 VC-12) 5G(2016×2016 VC- 20G(128×128 VC-4) 20G(128×128 VC-4) 12)
发光功率(dBm) 最小 最大
接收灵敏 最小过载光 度(dBm) 功率(dBm)
通道允许 最大色散
热插拔
在线光功 率监测
备注
-23
-8
-15
-8
-28
-8
-5
0
-5
0
-34
Siemens 6XV1830-3EH10 产品说明书
● halogen-free
No
● silicon-free
Yes
Standards, specifications, approvals UL/ETL listing / 300 V Rating UL/ETL style / 600 V Rating Certificate of suitability ● CE marking ● RoHS conformity Marine classification association ● American Bureau of Shipping Europe Ltd. (ABS) ● Bureau Veritas (BV) ● Det Norske Veritas (DNV) ● Germanische Lloyd (GL) ● Lloyds Register of Shipping (LRS) ● Nippon Kaiji Kyokai (NK) ● Polski Rejestr Statkow (PRS)
● to mineral oil ● to grease ● to water Radiological resistance / to UV radiation
Limited segment length (see manual for PROFIBUS networks) flame resistant according to IEC 60332-1-2
6XV1830-3EH10 Page 3/3
08/08/2017
Subject to change without notice © Copyright Siemens
Suitability for use Cable designation
LYNXTechnik AG 12G SDI 分配放大器说明文档说明书
带 12G 光/电接口的单链路 <> 四链路 (2SI) 转换描述DVD 5480 HO 模块是一块高性能 12G SDI 分配放大器带12G 光和电接口的单链路 <> 四链路 (2SI) 转换。
该模块根据用户设置，可被用于各种应用场合：1.12G SDI 分配放大器2.12G SDI 单链路 到 四链路 (2SI) 转换器 (解复用)3.四链路 (2SI) 到 12G SDI 单链路转换器 (复用)4.8K SDI<>光纤转换DVD 5840 HO 是理想的符合高品质要求的广播级和专业视频应用的解决方案。
该模块在四对 TR 光槽（发射器/接收器，SFP 选件）中提供四路 12G SDI 光输入和四路 12G SDI 光输出。
DVD 5480 HO后背板X T e c h n i k A G®e l e v i s i o n E q u i p m e n t12G SDI 分配放大器应用 2: 两路复用模式在该模式下，两个四链路 (2SI) 信号通过一个电和光输入，被复用为两路 12G SDI光信号被解复用为四链路 (2SI) 光 3.2 在该模式下，单一 12G SDI 电信号被解复用为四链路出。
规格型号 #描述包括DVD 5480 HO12G SDI 分配放大器 带 12G 光/电接口的单链路 <> 四链路 (2SI)板卡，后部终端面板和安装螺丝**参考使用手册可以在 上找到订购信息设置和控制带 12G 光/电接口的单链路 <> 四链路 (2SI) 转换CardModules© 2019 LYNX Technik AG. 版权所有视频输入 (光纤) - 可选信号类型SMPTE 297M-2006SMPTE 292M, 424M, 2082-1支持格式SDI 格式高达 12Gbit/s* (查阅表格)输入数 4 x 接收器 (OH-TR-12G-LC 或 OH-RX-12G-LC)连接头LC/PC (单模)波长1260nm – 1620nm (-14dBm 灵敏度)视频输入 (微 BNC)信号类型SMPTE 292M, 424M, 2082-1输入数 4 x 双向 微BNC 端口回波损耗>4dB 高达 12 Gbit/s视频输出 (光纤) - 可选信号类型SMPTE 297M-2006SMPTE 292M, 424M, 259M, 2082-1输出数 4 x 发射器 (OH-TR-12G-LC 或 OH-TX-12G-LC)连接头LC/PC (单模发射器/接收器 – 双工连接)波长标准: 1310nm (non-CWDM)传输功率标准: 1310nm (non-CWDM): -5dBm typ.视频输出 (微 BNC)信号类型SMPTE 292M, 424M, 2082-1输出数 4 x 双向 微BNC 端口连接头LC/PC (单模发射/接收 – 双工连接)回波损耗>4dB 高达 12 Gbit/s性能2SI 解复用两个能被激活的 12G SDI 单链路 到 四链路 (2SI) 转换 或 四链路 (2SI)到 12G SDI 单链路转换的转换器电规格操作电压+12 VDC功耗18W 包括可选光纤 SFPs 安全IEC 60950/ EN 60950/VDE 0805机械尺寸283mm x 78mm重量板卡 120g ，连接头面板 100g环境*温度5°C 到 40°C 维持规格湿度最大 90% ，非凝结控制远程控制通过 APPolo 控制系统，完全支持远程控制和状态监测支持版本： APPolo 8.10.0 或更高主板指示器 / LED输入端口状态8 x LED 主状态1 x LED 电源状态1 x LED支持视频标准比特 / 色彩10 比特 / 4:2:2 (Y,Cr,Cb)格式: 1.5 Gbit720p / 60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98 Hz 1080i / 60 / 59.94 / 50 Hz1080p / 30 / 29.97 / 25 / 24 / 23.98 Hz 1080psF / 25 / 24 / 23.98 Hz 格式: 3.0 Gbit 1080p / 60 / 59.94 / 50 Hz (Level A)格式: 12.0 Gbit 2160p / 60 / 59.94 / 50 Hz12G SDI 分配放大器LYNX Technik AG www.lynxtechnik.top。
尼凯恩N6产品参数
简介尼凯恩N6，英文名字为“neken N6”，是深圳柏凯恩科技有限公司出品的一款旗舰机型，采用5寸FHD IPS全视角超视网膜屏，分辨率达1920*1080 ，ppi高达441，搭载1.5Ghz 四核处理器（联发科MT6589T），配备1Gram+16Grom大内存（2+32采用定制模式），前摄500万（插值到800万），后置1300万像素堆栈式摄像头。
neken N6的超豪华配置，可以说是在当前市场上少有的高配机型，而机身采用2.75mm超窄边框，9.75舒适厚度，IPS全贴合技术使整机极具气质。
一款手机如果没有强劲主流的硬件配置的话是很难吸引到消费者的注意的，四核处理器、5英寸全高清硬件配置也成为了新一代主流四核手机的硬件配置。
[1-3]neken N6参数CPU MT6589T 四核1.5GHzRAM 1GBROM 16GB 支持内存卡扩展屏幕 5.0英寸1920x1080像素分辨率IPS摄像头1300万+前置500万像素摄像头操作系统Android 4.2.1SIM卡类型双卡位标准SIM卡机身尺寸141.7x70.5x9.75mm电池2000mAh网络制式WCDMA/GSM双模双待重量176g[4]重要参数网络模式：GSM，WCDMA网络类型：双卡双模外观设计：直板主屏尺寸：5.0英寸1920x1080像素触摸屏：FHD屏，多点触控（五点）摄像头像素：后1300万像素前800万CMOS操作系统：Android OS 4.2.1RAM容量：1GBROM容量：16GB电池容量：2000mAh蓝牙传输：支持蓝牙4.0GPS导航：内置GPS，支持A-GPS细参数上市日期：2013年07月手机类型：3G手机，智能手机，音乐手机，拍照手机外观设计：直板主屏尺寸：5.0英寸触摸屏：FHD屏，多点触控（五点）主屏材质：全视角IPS屏幕主屏分辨率：1920x1080像素主屏色彩：1600万色[5]网络制式网络类型：双卡双模网络模式：GSM，WCDMA数据业务：GPRS，EDGE，HSDPA支持频段：2G：GSM 900/1800/19003G：WCDMA 900/2100MHz操作系统：Android 4.2.1核心数：四核CPU型号：联发科MTK6589TCPU频率：1.5GHz[5]手机存储RAM容量：1GBROM容量：16GB存储卡：MicroSD卡，支持App2SD功能扩展容量：32GBSIM卡类型：SIM卡电池类型：可拆卸式电池电池容量：2000mAh键盘类型：虚拟QWERTY键盘机身颜色：蓝色/白色手机尺寸：141.7*70.5*9.75mm手机重量：176g [5]基本功能输入法：手写，笔画，拼音输入法，输入方式：手写通话记录：已接+已拨+未接电话通讯录：名片式存储录音功能情景模式待机图片主题菜单日历功能闹钟功能秒表计算器[5]商务功能电子邮件支持IMAP4，POP3，SMTP等世界时钟支持世界时钟短信支持SMS/EMS/MMS免提通话支持免提通话通话记录已接来电+未接来电+已拨电话来电图片识别支持来电图片识别来电铃声识别支持来电铃声识别[5]产品特性GPS导航：内置GPS，支持A-GPS感应器类型：重力感应器，加速传感器，光线传感器，距离传感器，陀螺仪，3D加速拍照功能摄像头：内置摄像头类型：双摄像头摄像头像素：后1300万像素前800万像素传感器类型：CMOS闪光灯：LED补光灯数码变焦：支持自动对焦：支持拍摄场景：支持全景拍照：支持笑脸识别：支持图像尺寸：最大支持4128×3096像素照片拍摄视频拍摄：1080p（1920×1080）视频录制其它功能：白平衡，色彩效果，对焦方式，感光度[5]娱乐功能视频播放：支持MP4/3GP/MKV等格式音频播放：支持AMR/AAC/MP3/MIDI/WAV/OGG等格式铃音描述：支持MP3/MIDI等格式图形格式：支持JPEG等格式游戏：支持下载社交应用：内置QQ，微信，新浪微博等[5]ROM支持Neken N6出厂搭载的是清爽的谷歌原生系统，另外已经有民间开发者适配了乐蛙OS，MIUI V5，百度云，阿里云等第三方特色ROM。
AMX-NXB-KNX使用说明
NXB-KNX使用说明NXB-KNX设备是网络协议转换器，使用前首先要用苹果浏览器更改其设备IP地址，打开浏览器，选择书签BONJOUR出现设备界，双击AMX NXB-KNX SN#203101X07B0347打开设备IP设置界面，关掉DHCP改为固定IP，设置好分配好的IP地址选择接受然后重启设备。
然后打开中控编程软件，如下图：ADMIN中有master connecton选项，打开后把设备连接方式改为TCP/IP URL，并设置好master port number,选择接受重启设备，然后在中控软件下会发现设备对应你设置好的master port number如下图：则完成设备配置工作。
下面是设备程序：PROGRAM_NAME='KNX TEST'(***********************************************************)(***********************************************************)(* FILE_LAST_MODIFIED_ON: 04/05/2006 AT: 09:00:25 *)(***********************************************************)(* System Type : NetLinx *)(***********************************************************)(* REV HISTORY: *)(***********************************************************)(*$History: $*)(***********************************************************)(* DEVICE NUMBER DEFINITIONS GO BELOW *) (***********************************************************) DEFINE_DEVICEdvKNX=13001:1:0TP84=10001:1:0VTP=33001:1:0(***********************************************************)(* CONSTANT DEFINITIONS GO BELOW *) (***********************************************************) DEFINE_CONSTANT//SWITCHLIGHT_1_ON_B=1LIGHT_1_OFF_B=2//DIMLIGHT_1_UP_B=11LIGHT_1_DOWN_B=12//PRESETMODE_1_B=1001MODE_2_B=1002(***********************************************************)(* DA TA TYPE DEFINITIONS GO BELOW *)(***********************************************************)DEFINE_TYPE(***********************************************************)(* V ARIABLE DEFINITIONS GO BELOW *)(***********************************************************)DEFINE_V ARIABLEDEV TP[]={VTP,TP84}KNX_STR[100]KNX_STR_IDKNX_STR_ID_STR[10]KNX_STR_V ALUEKNX_STR_V ALUE_STR[10]KNX_LOOPTP_FB_LOOP(***********************************************************)(* LATCHING DEFINITIONS GO BELOW *)(***********************************************************)DEFINE_LATCHING(***********************************************************)(* MUTUALLY EXCLUSIVE DEFINITIONS GO BELOW *)(***********************************************************)DEFINE_MUTUALLY_EXCLUSIVE(***********************************************************)(* SUBROUTINE/FUNCTION DEFINITIONS GO BELOW *)(***********************************************************)(* EXAMPLE: DEFINE_FUNCTION <RETURN_TYPE> <NAME> (<PARAMETERS>) *)(* EXAMPLE: DEFINE_CALL '<NAME>' (<PARAMETERS>) *)DEFINE_FUNCTION EIBSet(DEV vdvEIB, INTEGER nAmxNr, LONG lV alue){SEND_COMMAND vdvEIB,"'SET=', ITOA(nAmxNr), ':', ITOA(lV alue)"}DEFINE_FUNCTION EIBGet(DEV vdvEIB, INTEGER nAmxNr){SEND_COMMAND vdvEIB,"'GET=', ITOA(nAmxNr)"}DEFINE_FUNCTION EIBAdd (DEV vdvEIB, INTEGER nNr, CHAR sTyp[], CHAR sGrpAdr[], CHARsFlags[])//{SEND_COMMAND vdvEIB,"'ADD=', ITOA(nNr), ':', sTyp, ':', sGrpAdr,':', sFlags"// }DEFINE_CALL 'EIB FEEDBACK'{FOR(KNX_LOOP=1;KNX_LOOP<14;KNX_LOOP++){EIBGet(dvKNX,KNX_LOOP)}}(***********************************************************)(* STARTUP CODE GOES BELOW *)(***********************************************************)DEFINE_START(***********************************************************)(* THE EVENTS GO BELOW *)(***********************************************************)DEFINE_EVENTDA TA_EVENT[TP84]{ONLINE:{CALL 'EIB FEEDBACK'}}DA TA_EVENT[dvKNX]{ONLINE: //添加地址{EIBAdd(dvKNX,1,'Switch','0/0/1',"") //开关地址,类型EIBAdd(dvKNX,11,'D IM4','0/0/3',"") //加减调光地址,类型DIM4EIBAdd(dvKNX,12,'Switch','0/0/2',"") //调光开关地址EIBAdd(dvKNX,13,'1BYTE','0/0/4',"") //调光地址,类型 1Byte// EIBAdd(dvKNX,14,'Switch','0/0/12') //调光开关地址// EIBAdd(dvKNX,11,'D im4','0/0/3') //调光地址,类型 4Bit// EIBAdd(dvKNX,12,'Dim4','0/0/2') //调光地址,类型 4BitCALL 'EIB FEEDBACK'}STRING:{IF(FIND_STRING(DA TA.TEXT,'SET',1) OR FIND_STRING(DA TA.TEXT,'V AL',1)){KNX_STR=DA TA.TEXTKNX_STR_ID_STR=REMOVE_STRING(KNX_STR,':',1)KNX_STR_ID=A TOI(RIGHT_STRING(KNX_STR_ID_STR,LENGTH_STRING(KNX_STR_ID_STR)-4)) KNX_STR_V ALUE_STR=KNX_STRKNX_STR_V ALUE=A TOI(KNX_STR_V ALUE_STR) //以上程序分析出KNX网关返回的地址及状态值SWITCH(KNX_STR_ID) //以下程序通过分析已经得到的值来做对应按钮的反馈{CASE 1:{[TP,LIGHT_1_ON_B]=KNX_STR_V ALUE [TP,LIGHT_1_OFF_B]=!KNX_STR_V ALUE}//开关的反馈写法CASE 11:{[TP,LIGHT_1_UP_B]=(KNX_STR_V ALUE=9) [TP,LIGHT_1_DOWN_B]=(KNX_STR_V ALUE=1)}//加减调光的反馈CASE 12:{[TP,3]=KNX_STR_V ALUE [TP,4]=!KNX_STR_V ALUE}//开关的反馈写法CASE 13:{SEND_LEVEL TP,1,KNX_STR_V ALUE}//赋值调光的反馈写法}}}}BUTTON_EVENT[TP,LIGHT_1_ON_B]//开关量开{PUSH:{EIBSet(dvKNX,1,1)}}BUTTON_EVENT[TP,LIGHT_1_OFF_B]//开关量关{PUSH:{EIBSet(dvKNX,1,0)}}LEVEL_EVENT[TP,2]//赋值调光2{SEND_LEVEL dvKNX,13,LEVEL.V ALUE}BUTTON_EVENT[TP,3]//调光开关开{PUSH:{EIBSet(dvKNX,12,1)}}BUTTON_EVENT[TP,4]//调光开关关{PUSH:{EIBSet(dvKNX,12,0)}}BUTTON_EVENT[TP,LIGHT_1_UP_B]//加减调光+ {PUSH:{EIBSet(dvKNX,11,9)}RELEASE:{EIBSet(dvKNX,11,8)}}BUTTON_EVENT[TP,LIGHT_1_DOWN_B]//加减调光- {PUSH:{EIBSet(dvKNX,11,1)}RELEASE:{EIBSet(dvKNX,11,0)}}(*使用AMX进行场景编写,语句可能比较多*) BUTTON_EVENT[TP,MODE_1_B] //全开模式{PUSH:{EIBSet(dvKNX,1,1) //打开灯光SEND_LEVEL TP,2,255 //调节灯光至最亮}}BUTTON_EVENT[TP,MODE_2_B] //全关模式{PUSH:{EIBSet(dvKNX,1,0) //关闭灯光SEND_LEVEL TP,2,0 //调节灯光至最暗}}(***********************************************************)(* THE ACTUAL PROGRAM GOES BELOW *) (***********************************************************) DEFINE_PROGRAM(***********************************************************)(* END OF PROGRAM *) (* DO NOT PUT ANY CODE BELOW THIS COMMENT *) (***********************************************************)。
客雷·康尼恩的网络产品说明说明书
by Kerry Quinn, Principal, PE, SES Technology Integration GroupThe Challenge: Automating the traditionalmanual processes of fiber optics andoptoelectronics alignment systems using a cost-effective, open systems approach.The Solution: Using our expertise insoftware development for data acquisition,machine control, and computer vision, we create high-performance, precision alignment and assembly systems using LabVIEW graphical programming.Several significant challenges face optical device companies during device development and subsequent transition of these devices into manufacturing. Because of the small size and precise tolerances imposed by most of these devices, manufacturers usually need one or more precision alignment systems for the manufacture and sometimes evaluation of the manufactured components.The SES Technology Integration Group,a National Instruments Select Integrator,recognizes the issues associated withautomating the manufacturing process, as well as the advantages of having an open systems approach.Gain Flexibility with OpenArchitecture and LabVIEWWith the various elements in a visionsystem – from inspection, to motion, tocapturing other types of data – integrationbecomes a critical task. One challenge facingdevelopers of commercial precision alignmentsystems is integrating these systems in amanufacturing environment. Unfortunately,most of these systems have not met thatchallenge and sit as “islands," unable to communicate with one another or with associated devices on the manufacturing floor. One tool we use in creating our open systems is the LabVIEW graphical development environment. LabVIEW is one of the most widely used commercial packages thatintegrates seamlessly with data acquisition,machine/motion control, and computer vision.It is a logical platform for developing openarchitecture, high-performance, and optical deviceassembly systems.In a recentexample, SES used LabVIEW to control alegacy nanopositioning stage using RS-232commands. When thenanopositioning stage proved insufficient for the job at hand, it was relatively simple to remove it from the system and replace it with stages using brushless servo motors. These motors receive step and direction commands from National Instruments powerful universal motion interface (UMI) technology.The UMI-7764, in combination with a NI high-performance motion controller, has proven useful to integrators of LabVIEW-based precision alignment systems in aninteresting way because integrators can use it to drastically shorten system delivery/lead times and downtimes. The UMI-7764makes it easy to switch one vendor’s servo and/or stepper-based drives with another, so we can respond to slipping deliveries and even to field retrofit/replace a failed motor from one vendor with a similar motor from the same or another vendor.LabVIEW systems can also mix and match motor types and drive technologies on an axis-by-axis basis. A single alignment system can easily control servo motors on some axes, RS-232 “smart motors" for pick-and-place, piezo stacks for final positioning,and more.System Designed for aManufacturing EnvironmentWhen designing an optoelectronics system for a manufacturing environment, the system should incorporate specialized design features, such as high levels of forced convection cooling and vibration-toughened connections and construction.Rugged plug-in boards based on the PXI ™standard have a long, proven track record of reliability. In addition to the highlyFiber Optics/Optoelectronics: LabVIEW ™Integrated precision alignment systems using theNational Instruments LabVIEW platform offer unmatched flexibility, capability, reliability, and areeasily integrated into the production environment.Integrating Precision Alignment Systems with LabVIEW™By using integrated technologies, such as vision and motion, companies can make their automated manufacturing processes more effective.specialized backplane trigger and other data handling features, these systems incorporate specialized industrial design features, high levels of forced convection cooling, and vibration-toughened connections and construction.A system using the PXI standard isalso very expandable, permitting a single PC controller to control and communicate with more than 200 plug-in boards. Expandability ensures your investment in hardware has an extended, serviceable life.Today’s standards also require communication with remote facilities.LabVIEW applications are “Internet-aware."These features range from simply sending e-mail messages to a supervisor or text pager with status information, to hostingactive two-way Web pages created by LabVIEW that show up-to-date alignment statistics and historical trends, and even performing remote control of the application via the Web browser from anywhere in the world.Integrated precision alignment systems using the National Instruments LabVIEW platform offer unmatched flexibility, capability,reliability, and are easily integrated into the production environment.sFor more information, contact Kerry Quinn at SES, tel (800) 935-8468, or visit the Web site at For more information on alignment and a common configuration using NI products,visit /info and enter exdyea .© 2001 National Instruments Corporation. All rights reserved. Product and company names listed are trademarks or trade names of their respective companies.Worldwide Offices: Australia 03 9879 5166 • Austria ***********•Belgium 02 757 00 20 • Brazil 000817-947-8791 • Canada 514 694 8521China ***********•Czech Republic 420 2 2423 5774 • Denmark 45 76 26 00 • Finland 09 725 725 11 • France (0)1 48 14 24 24 • Germany 089 741 31 30Greece 30 1 42 96 427 • Hong Kong 2645 3186• India 91 80 535 5406 • Israel 03 6393737 • Italy 02/413091 • Japan 03 5472 2970 • Korea 02 596 7456Malaysia 603 9596711• Mexico 001 800 010 0793 • Netherlands 001 800 010 0793 • New Zealand 09 914 0488 • Norway 32 27 73 00 • Poland 48 22 528 94 06Portugal 351 210 311 210 • Russia 095 238 7139 • Singapore 65 2265886 • Slovenia 386 3 425 4200 • South Africa 082 877 8530 • Spain 91 640 0085Sweden 08 587 895 00 • Switzerland 056 200 51 51 • Taiwan 02 2528 7227 • U.K.01635 523545 • Venezuela80014466(512) 683-0100 •Fax (512) 683-9300 •***********Continued from page 1。
尼凯恩NX产品简介
产品简介深圳柏凯恩科技有限公司联合阿里云手机操作系统发布了新一代FHD旗舰智能手机——尼凯恩NX，NX作为一款“超视网膜影音旗舰智能手机”，有着强悍的影音功能，尤其适合时下许多对电影、音乐品质有着发烧追求的影音爱好者。
先来看看NX顶尖的影音配置：它拥有一块5英寸Full HD超视网膜显示屏，分辨率达到全高清1920×1080，441 PPI极致细腻惊艳；采用OGS单玻璃全贴合技术，LTPS低温多晶硅工艺。
1300万像素背照式CMOS主摄像头，专业蓝玻璃滤光，F/2.2大光圈，同时支持Denoise-Image相片噪点消除及陀螺仪防抖；超强的500万像素高清豪华前置摄像头，支持智能美颜，美化功能全面升级；前后摄像头均支持1080P高清视频录制。
28纳米极速四核1.5GHz处理器，PowerVRSGX544图形处理核心，1GB RAM+4GB ROM。
支持双模双待，蓝牙4.0。
搭载最新的阿里手机系统，酷享海量正版视频、音乐、游戏资源及更安全的淘宝购物体验。
尼凯恩NX在1300万高清像素的基础上还配备了蓝玻璃滤光片，有效改善目前大部分智能手机拍照发红的现象，使拍出的照片色彩更自然更接近真实色彩。
支持智能美颜、陀螺仪防抖、连拍、快拍等，对于爱好自拍、街拍的年轻时尚女性来说，显得很诱人基本参数品牌：尼凯恩（neken）产品型号：NX产品名称：尼凯恩逆袭版上市时间：即将上市外观设计：直板手机颜色：熊猫白键盘类型：虚拟QWERTY键盘输入方式：多点触控操作系统：阿里手机系统（并非Android，却兼容APK应用）机身尺寸：141.7*70.5*9.75mm机身重量：单机119g，电池41g电池容量：2000mAh（锂聚合物）详细参数存储内存1G RAM+16G ROM 存储卡类型MicroSD卡最大存储扩展64GB屏幕屏幕尺寸 5.0英寸屏幕色彩1600万色屏幕材质IPS硬屏（OGS全贴合技术）分辨率FHD级别1920×1080像素触摸屏电容屏，多点触控拍照后置摄像头1300万像素前置摄像头500万像素（插值800万支持1080P摄像）传感器类型CMOS闪光灯LED闪光灯高速连拍支持多视角拍摄支持曝光补偿支持可选ISO感光模式支持可选测光模式支持可选白平衡支持可选曝光值支持可选色彩效果支持可选对焦方式支持可选对焦区域支持可选自动对焦支持拍摄风格支持可选拍摄场景支持可选照片分辨率最大支持4224*3000像素照片拍摄特色功能全景拍照、自动场景检测其它性能对比度、饱和度、锐度自主调节视频视频录制1080P（1920x1080，30帧/秒）视频播放1080P（1920x1080，30帧/秒）多媒体功能音乐播放支持MP3、AMR、ACC、ASF等格式，并支持APE、FLAC无损音乐视频播放支持MP4、3GP、MOV、MPEG、MKV、FLV等格式图片播放支持JPEG、PNG、GIF、BMP等格式JAVA支持电子书支持收音机支持FLASH播放支持网络网络模式WCDMA/GSM网络频率2G：GSM 850/900/1800/1900MHz3G：WCDMA 850/2100MHz数据业务GPRS、EDGE、HSPA、HSPA+数据速率HSDPA 42.2Mbps，HSUPA 11.5Mbps GPS GPS+AGPS蓝牙蓝牙4.0，蓝牙HID感应器重力感应支持光线感应支持距离感应支持3D加速支持电子罗盘支持三轴陀螺仪支持手机附件包装清单：主机x1锂电池x1数据线x1充电器x1耳机x1说明书x1保修信息保修政策：全国联保，享受三包服务质保时间：1年质保备注：主机1年，电池6个月，充电器1年，有线耳机3个月。
NX300简易使用说明书
模块的配置通过NAM DEMO网络模块控制软件完成，配置写入如下只写入0128类似数据，各数据位含义如下：0：保留，写入0；1：使能监听模式，与NX-590NE同时使用时写入1，否则为0；2：NX300模块要使用的键盘组，可以为1到8，建议不使用1；8：主机系统中实际使用分区的个数，根据主机的实际情况填写1 到8。
注：未做配置时，使用默认值：0021，不使用监听模式，使用2组键盘，开启分区1。
4、调试步骤A、主机断电，模块接线，上电B、配置NX300模块网络参数，使NX300可以与NAM DEMO软件正常连接，然后根据现场情况按3节中的配置参数写入；C、NX300模块断电后重新上电；D、用主机上的实物键盘进入编程模式然后退出，由主机自动查找到NX300模块（输入*8+9713（密码）+0#+Exit+Exit），等待1分钟后完成查找就可以通过测试软件对主机进行控制测试。
注：在测试软件上使用旁路防区命令时，使用Bypass+防区+Bypass即可完成，与实际键盘按两次Bypass结束不同。
EMB网络报警模块使用说明书型号：NX300（GE NX-4/6/8/8E适用）1、主要技术参数：1.输入电压：14~18V DC2.工作电流：300mA（最大800mA）3.支持的协议：ARP，IP, ICMP ,UDP，TCP， DHCP，HTTP，SOCK54.网络接口：10M IEEE 802.3 UTP接口RJ452、外型及电气定义z外型z指示灯RX：网络接收数据指示灯TX：网络发送数据指示灯RUN：命令数据交互通讯指示灯z功能跳线RST：模块复位。
特殊需求时使用，正常使用时无短路帽。
DP：网络通讯参数远程使能，有短路帽时才能修改网络通讯参数，出厂时有短路帽。
FS1、FS2：NX300型号上不使用此功能。
z主机接线端子对应表3、主机编程及接入事项NX300模块可同时模拟一组中所有键盘及NX-590NE模块，根据现场接入模块的地址分配来选择使用的键盘组，出厂默认为第二组（地址从C8H开始），或者通过配置软件进行修改。
利维顿NE100 LCnet智能Jack套餐说明书
ApplicationLeviton’s NE100 LCnet SmartJack Package enables Leviton Control Network (LCnet) lighting to be adjusted and configured via aWindows-like GUI for maximum user convenience and control. The system allows you not only to dim and brighten lights and switch them on and off, but also to adjust the settings that direct automatic functions, such as daylight harvesting.This package is an essential component for any LCnet system incor-porating building management features, and where centralized light-ing administration and access to advanced settings are desirable.LPD software is ideally suited to cube farms and other spaces where wall controllers are impractical but user control of lighting is required—or in any area where a PC interface is preferred.The four components that comprise the package are the NE100SmartJack (with cable), Leviton Personal Dimmer (LPD) software,Leviton Personal Dimmer Administrator (LPDA) software, and Leviton HTTP Server software (LPDS). All software operates on IBM-compati-ble computers running Windows operating systems equipped withHTTP support and an Ethernet card.Leviton Mfg. Co., Inc.59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538Visit our Website at: CA TALOG NUMBERS:ProductSpecificationsNE100.........................Leviton Mfg. Co., Inc.59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538Visit our Website at: Features and Benefits GENERAL• Familiar Windows GUI (graphical user interface) for intuitive operations.• User and administrator control over light fixtures and settings.• Setup program makes all software easy to install.• Software can be loaded onto an unlimited number of PC’s.LEVITION PERSONAL DIMMER• Allows basic lighting control in areas where traditional wall controllers are impractical: such as cube farms and large, open work areas.• Gives users the ability to adjust lights without ever leaving the seat.• Enables users with daylight harvesting to change settings that guide automatic light adjustments—maintaining optimal light levels for individual needs.• Optional programming to dim lights to the Minimum Light Level when occupancy is no longer detected, instead of automatically shutting off the lights.• Eases service by letting administrator access restricted settings from any LPD computer using a secure password.• Accommodates workgroups by allowing numerous LPD workstations to be set to control all lighting on a single address.• Supports supervisors by allowing a single LPD workstation to access multiple addresses.LEVITON PERSONAL DIMMER ADMINISTRATOR• Gives you all the capabilities of the LPD plus a broader scope and added functionality.• Provides easy method for system setup, assigning addresses, and adding new users.• Centralized control over ALL LCnet lighting systems: including dimming/brightening, on/off switching, and all settings.• Administrator control over all lighting adjustments and fade rates.• Simple interface with auxiliary systems (including HVAC, Emergency, Time Clock, and Loadshed) for additional savings and safety.LEVITON HTTP SERVER• Enables communication necessary for lighting system to operate.• PC loaded with Server (LPDS) software must be attached to a SmartJack.NE100 SMARTJACK• Comes with RJ11-to-DB9 cable for connecting PC to wall jack.• Contains two LED’s that blink red and green to confirm status of message.• Fits standard NEMA wall boxes.JOB NAME:JOB NUMBER:CATALOG NUMBERS:SPECIFICATION S UBMITTALProduct SpecificationsNE100.........................Leviton Mfg. Co., Inc.59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538Visit our Website at: User InterfaceThe LPDA enables administrators to setup,monitor, adjust, and support LCnet lighting from a centralized location. The LPDA interacts with HTTP Server software to obtain information on all nodes within the system. Clicking on any node displays all users attached to that address,from where you can get full access to those addresses.The LPDA can be used to activate emergency and loadshed modes, and to schedule auto-off time clock sequences. It can also be used to set:• Maximum Light Level • Minimum Light Level • Light Maintain Level• 30-Minute Manual Timeout • Unoccupied State (Light Level)• Light Regulation Level • Loadshed Level • Fade Rates • AddressesMain LPDA ScreenAdvanced Settings ScreenThe LPD is a combina-tion of a few, intuitive screens where users can adjust their lights right from the computer. The ability to adjust light lev-els that serve as the basis for daylight har-vesting gives usersextreme flexibility to set lighting to individual preferences. Users can also adjust theUnoccupied State (Light Level) and unit of light measurement (to foot-candle or percentage).The Leviton Personal Dimmer Quick Slider can be left open in the corner of the desktop, for those who want to adjust their lights quickly, without ever leaving their seat.JOB NAME:JOB NUMBER:CATALOG NUMBERS:SPECIFICATION SUBMITTALG-6239Q/J2/eg© 2001 Leviton Manufacturing Co., Inc. All Rights ReservedJ-2ProductSpecificationsNE100.........................Leviton Mfg. Co., Inc.59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538Visit our Website at: SpecificationsSMARTJACK ElectricalInput Voltage: 24VDC Input Current: 40mA Power Consumption: 1WConnectivity: RJ11 to DB9 cableTesting/Code Compliance: UL Listed, CSA Certified,and FCC Part 15PhysicalSize: 4.41 x 1.76 x 1.69in. (11.2 x 4.5 x 4.3cm)Color: white (with matching wallplate and ivory color change kit for SmartJack)EnvironmentalOperating Temperature Range: 0ºC to +55ºC Storage Temperature Range: -10ºC to +85ºC Relative Humidity: 20% to 90% non-condensing Warranty:Limited 2-Year Warranty SOFTWARESoftware System RequirementsOperating System: latest compatibility listed on /centuraHardware Requirements: CD-ROM drive, Ethernet card,HTTP supportINSTALLATIONSMARTJACKThe SmartJack must be installed on a LCnet server that is part of a network that supports HTTP and has Leviton HTTP Server software (LPDS) loaded on it.Low Voltage Class 2 Wiring• Daisy chain to power pack bus.• Make connections in junction box no longer than 29ft drop.• Use CAT5-type puter ConnectionConnect to PC via supplied cable: DB-9 end con-nects to PC and RJ-11 end clicks inside SmartJack.Leviton SoftwareThe Leviton CD that comes as part of this package contains a setup application for each program. Complete installation instructions can be found on and within the User Guide for any LCnet lighting system.HTTP ServerMust be installed on the PC that has an NE100 SmartJack connected to it and meets all system requirements.• If the serial port number = 1: running the setup program under the LPDS directory on the Leviton CD will install the software.• If the serial port number ≠ 1: The serial port number should be cor-rected in the Open the SerCnf.txt file using a text editor such as Notepad.Using the existing Intranet infrastructure eliminates the need for addi-tional hardwiring.Leviton’s Limited T wo-Year W arrantyThis warranty gives you specific rights,and you may also have other rights,which vary in different states and countries.Leviton warrants to the original consumer purchaser that this product is free of defects in materials and workmanship for 2 years from the purchase date.Leviton’s only obligation is to correct such defects by repair or replacement,at its option,if within such 2 years the product is returned prepaid,with proof of purchase date,and a description of the prob-lem to the Leviton Manufacturing Co.,Inc.,ATTN:Quality Assurance Department,59-25 Little Neck Pkwy.,Little Neck,NY 11362-2591.This warranty does not cover labor for removal or reinstallation of the product and is void on any prod -uct installed improperly or in an improper environment,overloaded,misused,opened,abused,or altered in any manner.There are no implied warranties of any kind,but if implied warranties are required by the applicable jurisdiction,Leviton limits the duration of any implied warranty of fitness for use or merchantability to 2 years.Leviton is not liable for incidental or consequential damages,including without limitation,loss of equipment use and lost sales or profits for breach of any warranty on this product.Some jurisdictions may not allow exclusion of or limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,so the above exclusions or lim-itations may not even apply to you.JOB NAME:JOB NUMBER:CATALOG NUMBERS:SPECIFICATION S UBMITTAL。
NEXO NX-241使用说明
快速入门本部分总结了那些未曾阅读本说明书的人经常提问的问题。
由于NX241 TD控制器的设计非常易于操作，所以用户应该很快会使用本控制器。
但无论如何请花一些时间阅读本说明书。
深入了NX241 TD控制器将有利于你发挥整个系统的性能。
请在使用本控制器前确保输入电源的电压正确。
警告：必须严格按所提供的信息使用功放。
在使用系统前，必须按“菜单2.6功放增益”和“菜单2.7功放功率”的要求设置系统。
不按此要求设置系统或不正确连接“反馈线”将会使NEXO的保修单失效。
复位同时按下按钮A、B和SWAP可以使本控制器复位，而不需要关闭电源。
选择扬声器组打开电源以后或在设备复位的时候，同时按下按钮A和B可以进入系统修改菜单。
按下按钮A和B直至所有的LED等熄灭，这时可以自由选择扬声器组。
使用旋钮，可以浏览里面的设置，按下“ENTER”会把设置载入。
选择扬声器设置可以在菜单3.0里选择扬声器组的设置（例如，你不用改变功放到扬声器的接线）。
浏览菜单在控制器的显示屏幕上“功能”前的数字就是菜单编号。
要变换菜单编号的第一个号码（主菜单编号）必须按下按钮A，变换第二个号码（子菜单编号）必须按钮B。
旋动旋钮或者按下SWAP（交换）按钮可以选择设置。
回复到默认值在菜单2.5里，可以把所有的设置恢复到厂家的默认值（除了所输入的功放资料）（菜单2.6和2.7）.自动储存为了防止有可能出现的电源，控制器在你上次改变设置后每2分钟自动保存当前的设置。
电源恢复后，设置会自动恢复。
控制器支持的预先设置列表（LOAD1_80）在印刷本说明书的时候，控制器的软件版本为LOAD1-80，它支持以下的设置。
Alpha扬声器组Alpha E扬声器组PS扬声器组配置NX241音频的通道为24比特，而中心计算器为48比特，运算能力为1亿个指令每秒。
其性能如下：◆2个模拟输入（平衡），24比特模/数转换器◆4个模拟输出（平衡），24比特模/数转换器◆4个感应输入（不平衡），18比特模/数转换器可以有如下的配置：◆立体声无源模式，带（或者不带）单声道超低频（2个独立的无源扬声器）◆立体声无源模式，带立体声超低频以及单声道无源模式，带2个超低频扬声器◆有源4路模式以及有源3路（单声道）模式◆有源3路+在输入B上的辅助超低频模式◆立体声有源2路模式均衡和滤波器超低频和甚高频（VHF）滤波控制器使用高通和低通滤波器，以过滤掉那些有可能损害TD控制器和功放性能的频率成分。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
尼凯恩NX（neken NX）联通版终端参数
上行峰值： 11.标准配置：单电单充、数据线、耳机
外观：直板
颜色：白色
尺寸/体积：141.7*70.5*9.75mm 重量：176g
屏幕参数：5.0英寸、1920×1080、1677万色、电容触摸屏
网络频率：GSM 5Mbps
下行峰值：42Mbps
基带芯片型号、架构及主频: MTK MT6589T Cortex-A7四核
1.5GHz
操作系统：阿里云OS 2.0.1
AP芯片型号、架构及主频：芯片同上
SIM卡类型：双卡均为2FF
摄像头：1300万像素AF 副摄像头：500万像素AF
重力感应：支持 NFC：不支持
WIFI/WAPI：支持
GPS：支持FM：支持
蓝牙：支持
RAM:1GB
ROM: 16GB
用户可用内置存储：10.71GB 扩展存储卡：最大可支持到32GB
电池容量：2000mAh；（ 3G：待机：160小时；通话：2.8小
时；2G：待机：200小时；通话：3.5小时）
预装联通业务：联通3G互联网沃门户、沃商店、116114、
手机邮箱、手机营业厅、USIM卡应用
第三方业务：应用中心、高德地图、淘宝、淘宝彩票、聚划
算、天猫、淘宝旅行、塔读文学、淘宝读书、支付宝钱包等
特色功能：阿里云系统。