胡连连接器样本(更新)

合集下载

1-J27系列印制电路连接器(1-13)

J27系列产品具有9、17、29、41、53、65、72、84、96、110线共10种规格。

根据环境等级，该系列产品可分为普通级、I级、Ⅱ级、GJB级、KJ级和宇航级。

其中普通级产品执行Q/450300RYL2301-90标准；I级产品执行Q/RY.J0102-91标准；Ⅱ级产品执行RY3.646.002-1JT标准；GJB级产品执行ZZR-Q/RY20024A-2011标准，KJ级产品执行Q/RY.J01101-2006标准；宇航级产品执行CASTPS05/003-2006标准。

用途：J27系列产品广泛适用于航天、航空等军用电子设备、计算机内印制电路板之间、印制电路板与电缆之间以及电缆与电缆之间的电连接。

特点：●体积小、重量轻、接触件密集度高，连接可靠性高。

●双曲形双片簧结构插孔保证接触可靠，接触电阻稳定，插拔寿命高，适应恶劣环境。

●定位导向装置具有36种方位组合，防同规格品种的误插合。

●本系列产品安装锁紧方式灵活，有垂直安装、水平安装、浮动安装以及螺纹锁紧等。

●插针、插孔为可拆卸式安装。

●插针、插孔基座材料耐高温（260℃），抗辐射（107Gy），符合航天真空使用要求，可与法国军标、美军标、IE C标准对应产品互换替代使用。

●GJB级产品符合GJB1438A-2006。

产品型谱：J27系列产品接触件数目具有9、17、29、41、53、65、72、84、96、110线共10种规格；连接器尾端端接形式分为直插印制板式、弯插印制板式、焊线式。

主要环境条件及技术指标J27系列产品类型环境等级 J27系列规格 Ⅱ类 I 类普通级名称TKXⅡBC TKXIBC TKXBC 直插头TKXⅡH TKXIH TKXH 焊线直插头TKLⅡH TKLIH TKLH 锁紧插头ZKXⅡBC ZKXIBC ZKXBC 直插座ZKXⅡH ZKXIH ZKXH 焊线直插座 ZKLⅡBC ZKLIBC ZKLBC 锁紧直插座 ZKLⅡH ZKLIH ZKLH 锁紧插座 ZKFⅡH ZKFIH ZKFH 浮动插座 TJXⅡBC TJXIBC TJXBC 直插头 TJXⅡH TJXIH TJXH 焊线直插头 TJLⅡH TJLIH TJLH 锁紧插头 TJⅡBW TJIBW TJBW 弯插头 TJⅡBW 1 TJIBW 1 TJBW 1 长弯插头 ZJXⅡBC ZJXIBC ZJXBC 直插座 ZJXⅡH ZJXIH ZJXH 焊线直插座 ZJLⅡBC ZJLIBC ZJLBC 锁紧直插座ZJLⅡBW ZJLIBW ZJLBW 锁紧弯插座 ZJLⅡBW 1 ZJLIBW 1 ZJLBW 1 锁紧长弯插座 ZJLⅡH ZJLIH ZJLH 锁紧插座J27-9 J27-17 J27-29 J27-41J27-53 J27-65 J27-72 J27-84J27-96 J27-110 ZJFⅡH ZJFIH ZJFH 浮动插座插头、插座相配直接形式及适用范围J27系列产品各型号规格的外形结构及安装开孔尺寸垂直安装（直脚插针）J27系列产品各型号规格的外形结构及安装开孔尺寸垂直安装（直脚插孔）J27系列产品各型号规格的外形结构及安装开孔尺寸水平安装（弯脚插针）J27系列产品各型号规格的外形结构及安装开孔尺寸垂直安装（焊线针、孔）J27系列产品各型号规格的外形结构及安装开孔尺寸垂直安装（焊线针、孔）J27系列产品各型号规格的外形结构及安装开孔尺寸垂直安装（焊线针、孔）J27系列产品各型号规格的外形结构及安装开孔尺寸浮动安装J27系列产品各型号规格的外形结构及安装开孔尺寸螺纹锁紧。

4针、5针、8针M12连接器—附尺寸图

M12连接器公头主要分为两大类：M12连接器公头带电缆系列（出线口为：3.5-8mm）和M12连接器公头螺钉系列（出线口为4-6mm，6-8mm）。
M12连接器公头有直头、90度弯头，防护等级IP67、防水、欧盟标准ROSH、CE。专门用于各种传感器、仪器仪表电子机械、通讯、航空、航海、计算机、LED、汽车、工程机械、机电、石油勘测、传输控制系统、电工电气系统、工业自动化等领域。针5针8针m12连接器附尺寸图5557连接器尺寸fpc连接器封装尺寸5557连接器封装尺寸db44连接器尺寸图sma连接器尺寸db9连接器尺寸图n型连接器尺寸ffc连接器封装尺寸db25连接器尺寸
4针、5针、8针M12连接器—附尺寸图
4针、5针、8针M12连接器，统称M12连接器公头，锁紧螺纹牙为M12*1。

常用连接器及参数一览表

常用连接器及参数一览表1. USB (通用串行总线)- 描述：USB是一种用于连接设备和计算机的通用接口标准。

- 参数：速度、版本、插头类型。

2. HDMI (高清晰度多媒体接口)- 描述：HDMI是一种用于高清晰度音视频传输的接口标准。

- 参数：版本、分辨率、带宽。

3. Ethernet (以太网)- 描述：Ethernet是一种用于局域网数据传输的标准。

- 参数：速度、类型、长度限制、传输介质。

4. Bluetooth (蓝牙)- 描述：蓝牙是一种用于短距离无线通信的技术标准。

- 参数：版本、范围、速率。

5. Wi-Fi- 描述：Wi-Fi是一种用于无线网络连接的技术标准。

- 参数：频段、速度、安全性。

6. VGA (视频图形阵列)- 描述：VGA是一种用于连接计算机和显示器的模拟视频接口。

- 参数：分辨率、带宽、颜色深度。

7. DVI (数字视像接口)- 描述：DVI是一种用于连接计算机和显示器的数字视频接口。

- 参数：分辨率、带宽、类型。

8. DisplayPort- 描述：DisplayPort是一种用于高分辨率音视频传输的接口标准。

- 参数：版本、分辨率、带宽、插头类型。

9. SATA (串行ATA)- 描述：SATA是一种用于连接存储设备和计算机的接口标准。

- 参数：速度、版本、插头类型。

10. Thunderbolt (雷雳接口)- 描述：Thunderbolt是一种高速数据传输和视频输出的接口标准。

- 参数：版本、速度、带宽、插头类型。

以上是一份常用连接器及其参数的一览表，可以根据不同的需求选择适合的连接器进行设备和计算机的连接。

常用连接器简介

线对板压接式连接器
SCN系列(原厂:JST） 1.号讯间距为2.5mm, 2.端子与号讯的保持力≥1.5kgf. 3.额定电压250V AC/DC,额定电流3.0A 4.耐压800V AC/minute,绝缘阻抗:DC500V,≥1000MΩ. 5.防火等级UL94-V0,适用温度:-25℃～+85℃. 6.适用线规:AWG #22-#28,最大电线绝缘OD:1.6mm 7.端子材质:黄铜镀锡;号讯材质:PA66 注：对应PCB通孔:∮1.0±0.05mm
Байду номын сангаас
线对板压接式连接器
MX3.0系列(原厂:MOLEX） (P3025母T、公号讯/P3020公T、母号讯) 1.号讯间距为3.0*3.0mm, 2.端子与号讯的保持力≥3.0kgf. 3.额定电压250V AC/DC,额定电流5.0A 4.耐压1000V AC/minute,绝缘阻抗:DC500V,≥1000MΩ. 5.防火等级UL94-V0,适用温度:-40℃～+105℃. 6.适用线规:AWG #22-#26,最大电线绝缘OD:1.9mm 7.端子材质:磷青铜镀锡;号讯材质:PA66 针座材质：胶体: PA66,PIN针:黄铜镀锡
线对板压接式连接器
VH3.96系列(原厂:JST） 1.号讯间距为3.96mm, 2.端子与号讯的保持力≥5.0kgf. 3.额定电压250V AC/DC,额定电流10A ,接触阻抗≤10mΩ 4.耐压1500V AC/minute,绝缘阻抗:DC500V,≥1000MΩ. 5.防火等级UL94-V0或V2,适用温度:-25℃～+85℃. 6.适用电线:AWG18#-22#,绝缘OD≤2.8mm. 7.端子材质:磷青铜或黄铜镀锡;号讯材质:PA66

全球十大连接器厂排名

全球連接器前十大廠於各區域市場排名
經濟部技術處ITIS計畫／產業分析師黃家慶
資料來源：Bishop Report；工研院IEK整理(200/04)
表一為前十大廠於各區域市場的排名分析，亦可看出歐美業者以併購及Total Solution擴展市場下，於全球各區域皆有很好表現；日本業者的表現卻僅止於日本、中國、亞太地區，主因在歐美地區則已有大勢力業者把關，而中國及亞太本身卻無太多較具規模的業者可抗衡；台灣鴻海早期開發北美市場，除了歐洲比較慢入場，日本地區比較難切入外，鴻海
於各區域營收比例比較平均。

雖然目前業者於其發源地的營收具優勢，但市場全球化正如火如塗的漫延著，就業者在各區域營收較具有明顯成長表現的地區做分析，可以看出目前各業者於非發源地的成長率普遍高於發源地，這也表示大廠於市場全球化佈局已有成效，且其發展重點皆指向中國及亞太地區，非歐系
業者在歐洲地區的營收亦大有成長，台灣業者鴻海於歐洲及日本亦有相當好的斬獲，所有跡象指出，不僅是中國及亞太地區，僅要能跨出國際
大門，處處皆是商機。

连接器编码分类和描述指导书

研究开发部公文拟稿纸密级：……日期：2012年3月15日北京鼎汉技术股份有限公司研究开发部文件鼎汉研发字【2012】0号签发人：14类连接器编码分类和描述指导书拟制：王莲琴日期： 2012-3-15审核：侯婕日期： 2012-4-17批准：黎东荣日期： 2012-4-20修订记录目录第一章概述 (1)1.1 目的 (1)1.2 适用范围 (1)第二章连接器分类 (1)2.1 连接器的分类 (1)2.2 连接器主要功能划分 (1)第三章连接器分类及描述指导 (2)3.1 B1401类欧式连接器 (2)3.2 B1403类IC插座 (3)3.3 B1405类插针 (4)3.3.1 排针 (4)3.3.2 跳线帽 (5)3.3.3 电源连接器用插针、插孔 (6)3.4 B1406类电缆连接器 (6)3.4.1 D型电缆连接器 (7)3.4.2 扁平电缆连接器 (7)3.4.3 圆形电连接器 (9)3.5 B1408类通信连接器 (10)3.5.1 网口连接器、电话连接器 (10)3.5.2 USB接口 (10)3.6 B1409类柔性印制板连接器 (11)3.7 B1410类普通插座 (12)3.8 B1411类普通端子 (13)3.9 B1412类普通插头 (13)3.10 B1417类冷压端子 (14)3.10.1 裸压端头 (14)3.10.2 管状端头 (15)3.11 B1418类线缆端子座 (16)3.11.1 凤凰端子座 (16)3.11.2 接线端子 (17)3.11.3 栅栏型端子座 (18)3.12 B1419类电源连接器 (19)3.13 B1420类排母 (20)第一章概述连接器做为一种机电元件，一般是成对工作的，分为插头和插座，它通过一定的机械动作来完成电气的连接和切断，它的主要功能有：（1）传输信号或输送电能；（2）接通电路或切断电路。

1.1 目的为规范申请人填写连接器的分类和描述，简化研发人员选型过程，提高编码的复用率和归一化水平，特拟制此指导书。

连接器类产品海关商品编码归类整理

8534009000 8536900000 8536900000 8536900000 8536900000 8536900000 8538900000 8538900000 8536700000 8536900000 8536900000 8536900000 8536900000 8536900000 8536900000 8536900000 8538900000 8538900000 8536690000 8536900000 8538900000 8538900000 8538900000 8538900000 8538900000 8536900000 8538900000 8538900000 8536690000 8536900000 8538900000 8538900000 8536700000 8536700000 8536900000 8536900000 8538900000 8538900000 8538900000 8540911000 8536900000 8536900000 8536900000 8536900000 8536900000 8538900000
xr2c0521n额定电压1000v853690000085369000008536900000molex牌连接器08500113小于24vfpc连接器36viriso牌imsa9681s30y9018538900000连接器零件罩壳品epic适用于hylectic和hypet牌注型10033900等用于保护和固定各种连接器连接器零件罩壳品epic适用于hylectic和hypet牌注450个型19134000等用于保护和固定各种连接器85389000008538900000853890000085389000008538900000护套pmsmd4016电脑dvd连接器上的零件值档光纤接头连接器专用零件1b11ost0230000n10000连接器壳体chbh36v以下连接作用连接连接器金属连接器壳体可变电阻器用c268012h8538900000连接器零件罩壳品epic适用于hylectic和hypet牌注型10415000等用于保护和固定各种连接器85389000008538900000853890000085389000008538900000854290000085429000008547200000854449190085472000008547200000854720000085472000008547200000护芯dinjackmd4016电脑dvd连接器上的零件连接器半成品铁壳3mcc2b护套光纤连接器用不锈钢制a1公壳体连接器用yav102tc14等21442插头塑胶壳连接器零件19500204等接触块集成电路用连接器100p接触块集成电路用连接器202p塑料外壳连接器零件molex牌15247140不规则形状导线铜制60v无接头eucb022a电视机连接器用电机用塑料制绝缘连接器cpp塑料制电线束用连接器recs牌pbs10塑料制电线束用连接器recs牌pbs13塑料制电线束用连接器recs牌pbs11塑料制电线束用连接器recs牌pb088708299000隔音帽车身游丝连接器用2v580103适用bmwvolvo大众车型90011000018708299000光纤光纤连接器用无品牌非色散位移单模蓝色直径0

SG30_33_36_40_50CX-P2-CN-UCN-Ver15-202205 用户手册光伏并

1 安全说明 ........................................................................................................... 1
1.1 拆包检查....................................................................................................... 1 1.2 安装安全....................................................................................................... 1 1.3 电气连接安全 ................................................................................................ 2 1.4 运行安全....................................................................................................... 3 1.5 维护安全....................................................................................................... 3 1.6 报废安全....................................................................................................... 4

HIF3BA系列连接器商品说明书

HIF3BA-GPIN HIF3BA-40D-2.54C HIF3BA-10D-2.54CHIF3BA-14D-2.54CHIF3BA-20D-2.54CB15Ribbon Cable connector Compliant with MIL StandardHIF3B Seriess Features1. Product Compliant with MIL StandardHIF3B series has been developed as a product compliant with MIL standard, and used for wide applications.2. UL Approval ProductHIF3B series connectors are UL approved.3. Mechanism to Prevent Mis-insertionThis connector is equipped with the mechanism to prevent Mis-insertion as follows.1The system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (MIL standard).2The system embeds and guides the polarizing key in the socket holes.4. Applicable Cable AWG#28The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. 0.9±0.1mm).s Product SpecificationsJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B16HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Ordering InformationHIF 3B - * D - 2.54 Rqwre tyq Series Name: HIFw Series No.: 3B, 3BA, 3BB (50, 60, 64 contacts only )e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r Contact alignment : D : Double t Contact pitch : 2.54mmy Connection typeR : ID type q SocketHIF 3B - *P A - 2.54 DSqwretyuq Series Name : HIF w Series No.:3B: (14 contacts not included)3BC: (10 contacts only) 3BA, 3BB: (50, 60, 64 contacts only)3BD: (10 contacts only)e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64r P : Pin headertA: Selective gold plated y Contact pitch : 2.54mm u Contact styleDS : Right angle type DSA: Straight typeq Pin HeaderJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B17HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Socket (With guide to prevent mis-insertion)Unit:mmNote1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.Note4: The 6 contact has no polarizing mark.Body Protector ClampJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B18HIF3B Series q Ribbon Cable connector Compliant with MIL StandardsSocketNote1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.Note2: The 6 contact has no polarizing mark.Body Protector ClampUnit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B19HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Four Wall Angle Through holeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves to the right according to the number ofcontacts.Note 4: The 10, 50, 60 and 64 contact connectors contain two types ofpolarizing slots.Use products, referring to (Note 1) (Note 2).s n=number of contactsUnit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B20HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Four-Wall Straight Through holeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves to the right according to the number ofcontacts.Note 4: The 10, 50, 60 and 64 contact connectors contain two types ofpolarizing slots.Use products, confirming (Note 1) (Note 2).Note 5: The 6 contact has no polarity mark.s n=number of contactsUnit:mmJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B21HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Three Wall Angle TypeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves according to the number of contacts.Note 4: The 10 contact connector consists of two types.Use products, confirming (Note 1) (Note 2).s n=number of contactsUnit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B22HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Three Wall Straight Through holeBPCB mounting patternNote1,Note2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note3: The spacer moves to the right according to the number ofcontacts.Note4: The 10 contact connector consists of two types.Use products, referring to (Note 1) and (Note 2).s n=number of contactsUnit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B23HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Four Wall Wrapping TypeBPCB mounting patternNote 1, Note 2. The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3. The spacer moves to the right according to the number ofcontacts.Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.Use products, confirming (Note 1) (Note 2).Note 5. The mark *indicates the number of contacts.Note 6. The nut built-in specification product is also provided.The product can be fixed by M2 screws from the rear e the screw of (board thickness) +4 mm under the neck.s n=number of contactsUnit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .s Four Wall Straight Through hole [Flux Blister Prevention Type ]BPCB mounting patternNote1: The number of polarizing slot and key installed positions changesaccording to products. Refer to the list as shown below.s n=number of contactsUnit:mmJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .sTwo Stage Staking Right Angle Through holeNote 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Referto the list as shown below.Note 3: The spacer moves to the right according to the number of contacts.Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.Use products, confirming (Note 1) (Note 2).Note 5: The mark *ndicates the number of contacts.Note 6: The locator is located optionally.Unit:mmThe products marked with 5comply with MIL standard.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .BCombination PatternBPCB mounting patternsMounting Hole SpacerNote : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.Note : 2 pieces are contained in a bag.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .BPolarizing KeyNote1: One unit of thisproduct is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.Note2: This product isapplicable to the HIF3BA-*D2.54R product.HIF3-GPIN(A)HIF3BA-GPINNote1: One unit of thisproduct is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.Note2: This product isapplicable to HIF3A-*D2.54R, HIF3C-*D2.54C and HIF3BA-*D2.54C products.HIF3B-GK CL562-0601-8J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B HIF3-Multi Clamp B HIF3-*CL Pull Tabq Low Profile Lock Pin HeaderB Lockq F Type Lock Pin HeaderLocking range more reduced than conventional lock type.This clamp is used for intermediate connection in the bus-line system, etc. Remove compulsory force from the insulation displacement area of the connector in intermediate connection.Note: The pin header corresponds to the HIF3BAEseries (lock E).This pull tab is used for the HIF3 series equipped with cable clamp function. Remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction.Note: This HIF3-* Pull Tab can not be used for HIF3BA-*PD.Note: The pin header corresponds to the HIF3BAE series (lock E).27.321.5J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .s Socket for CrimpingJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .sCover Case for Crimping socketNote 2: Note that the product cannot be used with AWG #20.Applicable jacket diameters are as described below.20 contacts: 1.7 mm diameter MAX26 to 40 contacts: 1.6 mm diameter MAX 50 to 60 contacts: 1.4 mm diameter MAXJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .RoHSs Contact for Crimping SocketRoHSRoHSRoHS RoHSRoHSJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B Toolsq Crimping ToolManual Crimping Tool HIF3-T2226HCq Automatic Crimping Tool (Type: CM-105)q Contact Extraction Tools How to use the extraction tool(1) How to extract contactsAs shown in Figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed.(2) How to adjust the lance (raise)In order to re-insert the contact removed from the insulated case,raise the contact lance area using the tool A, and re-insert the contact, asshown in Figure 2.Figure 1Part Number HIF1-POCL No.550-0049-7J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardB Socket Side (Crimping) Assembling Procedures(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown Figure 2.(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).Note1 : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".Note2 : Wire strip length: Refer to crimp condition sheet.Figure 1Figure 2Figure 3Figure 4Wire strip lengthJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardHIF3B Connection Circuit DiagramType ABType ADType CDT y p e A BT y p e A D T y p e C D J a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardType ACType CCType AA T y p e A CT y p e C CT y p e A AJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardHIF2E R(S) A to HIF3B Connection Circuit DiagramType AAType ACJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardType BAType BCJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardHIF2E R(S)B to HIF3 Connection Circuit DiagramType AAType ACJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL StandardType BAType BCJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL Standards Features1. In-line TypeThis connector can be used for internal wiring cable to cable within equipment.2. CompatibilityThis connector is compatible with HIF3A series as well as HIF3B series socket.3. Applicable CableThe applicable cable is UL2651 AWG#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8to 1.0mm).s Product SpecificationsNote 1: Includes temperature rise caused by current flow.Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range andHumidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for aspecific part number shown.s Ordering InformationHIF3BA - *P D - 2.54 R - MCqerwutys Materialq Series Name: HIF3BB (50, 60, 64 contacts only)HIF3BD (10 contacts only)HIF3BAE (60 contacts only)w Number of Contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60and 64e P : Plug r D : contact alignment : D : Double t Contact Pitch : 2.54mm y Connection type : Ribbon cable u MC: Mold clampJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL Standards PlugNote 1, Note 2: The number of polarizing slot and key installed positions changes according to products.The 10 contact connector only has no position for polarizing key insulation.Note 3: The number indicated in parentheses are sizes for 60 and 64 contact connectors.Note 4: The HIF3BAE-60PD-2.54R-MC product partially differs in a locking form, and the mating member isapplicable for HIF3A only.Unit:mm*D sizeunlocking sizeJ a n .1.2017 C o p y r i g h t 2017 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series q Ribbon Cable connector Compliant with MIL Standard BConnection ProceduresType AOType BOType COType DONote1: Cable length tolerance Less than 500 (mm)More than 500 (mm)Note2: When a cable such as a twist cableor a slit (like a roller screen) cable isused, the cable pitch will changeaccording to cable manufacturers.If connection failure has occurred,please contact Hirose sales.+10+3Jan.1.217Copyright217HIROSEELECTRICCO.,LTD.AllRightsReserved.HIF3BA-20PD-2.54 R-MC HIF3BA-30D-2.54CHIF3BA-34D-2.54CHIF3BA-34P-2.54WHIF3BD-10PD-2.54R-MCHIF3BA-14P-2.54 W HIF3BA-34PD-2.54R-MCHIF3BA-40PD-2.54R-MCHIF3BD-10P-2.54WHIF3BA-GPIN HIF3BA-40D-2.54C HIF3BA-10D-2.54CHIF3BA-14D-2.54CHIF3BA-20D-2.54C。

主流连接器对应的国产料号(更新)

J611A-2.2×0.6A7114-4025(YAZAKI矢崎号)J611A-2.2×0.6B7114-4026(YAZAKI矢崎号)A7116-4025(YAZAKI矢崎号)J622A-2.2×0.6A8100-3808(SUMITOMO住友号)J625-2.2B368084-1（AMP安普号）740 367-3(KET)6B740 368-3(KET)25A-2.3S8240-4862(SUMITOMO住友号)13517856(DELPHI德尔福号)13519984(DELPHI德尔福号)15458363(DELPHI德尔福号)15458364(DELPHI德尔福号)82304282(MSSL)82404422(MSSL)1530-4722(DELPHI德尔福号)1530-4720(DELPHI德尔福号)6B1530-4724(DELPHI德尔福号)N904 886.02(大众号）8240-4050(SUMITOMO住友号)J614-2.8*0.8A142754-1(AMP安普号)J611-2.8×0.5A15458340(DELPHI德尔福号)J621-E2.8×0.5A15458361(DELPHI德尔福号)J621-E2.8×0.5B82404050(MSSL)J625-2.8×0.8A1360 9538(DELPHI德尔福号) J625-2.8×0.8B1360 9539(DELPHI德尔福号) J625-A2.8×0.8B1360 9537(DELPHI德尔福号)0.6B740 187-3(KET)0.6A15458316(DELPHI德尔福号)J621-F3×0.6A730 383-3(KET)J621-F3×0.6B730 186-3(KET)J6232-E3A925590-1(AMP安普号)J613-3A18002097(MSSL)N 906 844 01(大众号）N 906 845 01(大众号）ST710507-3(KET)ST710559-3(KET)214 63651-13-3-062(上海金亭号)533 59931-13-3-066(上海金亭号)6-2.513608457(DELPHI德尔福号)6-613609445(DELPHI德尔福号) 10681101060(MSSL) 20681102060(MSSL) 30681103060(MSSL) 30881103080(MSSL)J432-8G1074 8236(DELPHI德尔福号)0296 2869(DELPHI德尔福号)8100-1236(SUMITOMO住友号)8240-4242(SUMITOMO住友号)PP0338401(南通号)I2670J1(上海特索号)311045(上海特索号)200003/200027(上海特索号)7.752.112（US）1-13-3-065(国产号)1-13-3-066(国产号)1-13-3-067(国产号)1-13-3-068(国产号)1-13-3-062(国产号)1-13-5-005(国产号)1-13-5W-001(国产号)157017-00P-WGT1-18-5-041(上海金亭号)P-CIT1-18-5-042(上海金亭号)FD027-81538 5785(DELPHI德尔福号)其它号2173 681-1(AMP安普号)8100-0544(矢崎)35421-6302(矢崎)15383364(DELPHI 德尔福号号)962 876-1(AMP安普号)7114-4100-02(YAZAKI矢崎号)崎号)S T730 497-3(KET)184030-3(AMP安普号)171631-1(AMP安普号)8230-4492(YAZAKI 矢崎号)8240-4882(YAZAKI 矢崎号)释和修改权属技术部DJ625B-0.6*0.6A8100-0461(SUMITOMO住友号)P E165620(DELPHI德尔福号)8230-4282(SUMITOMO住友号)1(AMP)1813018313519981(DELPHI德尔福号)144 431-1(AMP安普号)964284-2(AMP安普号)927771-3(AMP安普号) 144 432-1(AMP安普号)965999-2(AMP安普号)927768-3(AMP安普号)N 906 844 02(大众号）927773-1(AMP安普号)0-0964280-2(AMP安普号)0-0964282-2(AMP安普号)0-0965999-2(AMP安普号)0-0964273-2(AMP安普号)7116-4037(YAZAKI矢崎号)7114-4037(YAZAKI矢崎号)N 904 890(大众号)927854-2(AMP安普号)15458370(DELPHI德尔福号)5458369(DELPHI德尔福号)964328-1(AMP安普号)963887-2(AMP安普号)AKI矢崎号)15356827(DELPHI德尔福号) 8100-0960(SUMITOMO住友号)号)号)OMO住友号)上海特索号)1-13-5W-002(国产号)。

1 Z-PACK 2mm HM连接器接触器针，电缆与板级连接，金色，直接，印刷电路板，40A接触电流

148546-1Z-PACK 2mm HM, Connector Contact, Pin, Cable-to-Board, Gold, Straight, Printed Circuit Board, 40A Contact Current Rating (Max), Power, Board Mount10/02/2020 01:14AM | Page 1For support call+1 800 522 6752Connectors > PCB Connectors > Board-to-Board Connectors >Board-to-Board Connector ContactsSealable:NoContact Orientation:StraightContact Mating Area Plating Material:GoldConnector System:Cable-to-BoardContact Type:PinFeaturesProduct Type Features Connector System Cable-to-Board SealableNoConnector & Contact Terminates To Printed Circuit BoardContact FeaturesPCB Contact Termination Area Plating Material Thickness .762 µm[30 µin]Contact Mating Area Plating Material Thickness .762 µm[30 µin]PCB Contact Termination Area Plating Material Gold Contact Base Material Copper Alloy Contact TypePin Contact Mating Area Plating Material Gold Contact OrientationStraight Contact Current Rating (Max)40 AMechanical Attachment Wire Insulation SupportWithout PCB Mount Retention With148546-1 ACTIVEZ-PACK TE Internal #:148546-1Z-PACK 2mm HM, Connector Contact, Pin, Cable-to-Board, Gold, Straight, Printed Circuit Board, 40A Contact Current Rating (Max), Power, Board MountView on >Z-PACK 2mm HM|Wire Insulation Support WithoutPCB Mount Retention WithPCB Mount Retention Type Action/Compliant TailConnector Mounting Type Board MountUsage ConditionsOperating Temperature Range-55 – 125 °C[-67 – 257 °F]Operation/ApplicationCircuit Application PowerPackaging FeaturesPackaging Quantity1Packaging Method PackageOtherComment Press-Fit, Press-fit.Product ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU CompliantEU ELV Directive 2000/53/EC Not Yet ReviewedChina RoHS 2 Directive MIIT Order No 32, 2016No Restricted Materials Above ThresholdEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JUN 2020(209)Candidate List Declared Against: JUN 2018(191)Does not contain REACH SVHCHalogen Content Low Halogen - Br, Cl, F, I < 900 ppm perhomogenous material. Also BFR/CFR/PVCFreeSolder Process Capability Not applicable for solder process capabilityProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledgebased on the information they provided. This information is subject to change. The part numbers that TE has identified asEU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalentchromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to theselimits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment productswill be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the partnumbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenousmaterials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limitsas defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC inarticles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements forsubstances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finishedproduct level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once AnArticle Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the10/02/2020 01:14AM | Page 2 For support call+1 800 522 675210/02/2020 01:14AM | Page 3For support call+1 800 522 6752product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly.Rectangular Power Connectors(87)PCB Latches, Locks & Retainers(1)PCB Ferrules & Shields(19)PCB Connector Shrouds(42)PCB Connector Covers(4)High Speed Backplane Connectors(15)Hard Metric Backplane Connectors (259)Board-to-Board Connector Contacts(5)Backplane Power Connectors(7)Backplane Guide Hardware(37)Backplane Connector Housings(2)Backplane Coding Keys(60) TE Model / Part #5148513-1TYPE M RECP CONT R/A PCB MNTTE Model / Part #148513-1TYPE M RECPT CONT R/A PCB MNTCompatible PartsAlso in the Series Z-PACK 2mm HMCustomers Also Bought10/02/2020 01:14AM | Page 4For support call+1 800 522 6752TE Model / Part #842695-000D-500-0455-2-613-236TE Model / Part #5148513-1TYPE M RECP CONT R/A PCB MNTTE Model / Part #5120523-21FHR,84,30A/S,S,N,S13TE Model / Part #2-829587-62X26P MOD2 STIFTLEITE Model / Part #2-216263-164P.IEC-G FEM.CONN.TE Model / Part #1274824-23 PORT SMT QSL RECPT W/FLANGE,TE Model / Part #1059426-14506 5016 02TE Model / Part #120521-21FHR,84,30A/P,S,N,S08,09,10TE Model / Part #1393203-9V23148-A0005-B101TE Model / Part #5100750-1Z-PACK/M F-HDR55+3PDocumentsProduct DrawingsPOWER CONTACT, PRESSFITEnglish CAD Files3D PDF3DCustomer View ModelENG_CVM_CVM_148546-1_D.2d_dxf.zipEnglishCustomer View ModelENG_CVM_CVM_148546-1_D.3d_igs.zipEnglishCustomer View ModelENG_CVM_CVM_148546-1_D.3d_stp.zipEnglishBy downloading the CAD file I accept and agree to the of use.Terms and Conditions Product Environmental ComplianceTE Material DeclarationTE Material DeclarationEnglish10/02/2020 01:14AM | Page 5 For support call+1 800 522 6752。

胡连连接器编码规则

胡连连接器编码规则
近几年，随着5G技术的发展及互联网应用的普及，胡连连接器作
为其重要一部分，也受到了广泛的青睐。

胡连连接器编码规则具有非
常重要的现实意义，用户必须清楚地了解和掌握它。

胡连连接器编码规则作为一种特定的编码，它具有灵活性和兼容
性等优点，可以大大提高连接的精准性、可靠性和可扩展性。

因此，
编码规则的标准性至关重要，需要用户授权来确认编码的准确性。

首先要知道的是，胡连连接器的编码规则主要有三种：一是“双
端配置”，这种方式可以确保连接器之间的接口具有相同的编码规则
和性能，从而避免出现不兼容的情况。

二是“从新老接口渐进安排”，意思是新标准接口将更换旧接口，以满足业务发展需求。

最后一种是“功能标签”，它的主要作用是用于区分连接的设备，以保证系统的
运行稳定性和性能。

此外，在使用胡连连接器编码规则前，用户还需要考虑许多其他
因素，比如供货商和应用选择、设备类别等，以保证最佳使用体验。

最后，胡连连接器编码规则可能根据业务需要随时发生变化，因此用
户还需要定期检查更新，以做到有效掌控。

因此，胡连连接器编码规则具有至关重要的意义，为网络用户提
供了可靠的解决方案。

只有理解和把握胡连连接器编码规则，互联网
应用才能持续发展，为广大用户提供更安全、稳定和便捷的服务。

常用连接器类型及特性说明

額定電壓（V /AC
）
額定溫度（℃）
DC耐流（A）
87214XX00
1.00 NYLON 66 28#～32#
50
-25～85
0.5
HMWB-XXFN 1.25
PA66 28#～30#
125
-40～85
1.0
86809XX00L
2.00 NYLON 66 24#～32#
250
-25～85
2.0
三、壓接式連接器
常用PITCH（mm） 0.6、0.8、1.0 3.3.1 0.6pitch 用於NB內部BT、 Camera等
三、壓接式連接器
3.3.2 0.8、 1.0 pitch
用於NB內部BT、Camera等
四、焊接式連接器
常用PITCH（mm） 0.4、0.5、 1.0 4.4.1 0.4、0.5pitch 部分用於NB內部LCD、LVDS等、 FPC用於手機。
四、焊接式連接器
4.4.2 0.5 pitch 用於NB內部LCD、LVDS等
四、焊接式連接器
4.4.3 1.0 pitch 用於NB內部LCD、LVDS等
五、JACK
5.5.1 用於NB內部USB、HDMI、DC IN等
六、連接器特性
穿端子式連接器
料號
pitch(mm) 材質型號
適用線材型號
六、連接器特性
焊接式連接器
料號
pitch(m 塑膠材
m)
質
額定電壓(V)
絕緣電阻測試電壓（V
）
耐壓
形變溫度(℃)
203730XXT-03
0.4
250 LCP 100 AC 250 DC AC(rms) ---

HIROSE DF62 DF62W系列2×2.2毫米间距线路连接器说明书

DF62/DF62W Series2 × 2.2mm Pitch,Wire-to-Wire Connectors for Small SpacesDec. 2020⑥DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces Features1. The slim, sleek design andsmooth contour combine tocomplete connections in tight spaces.These connectors were designed to take full advantage of small/narrow spaces.The contacts are arranged in a grid pattern which shortens the diagonal distances and the body was slimmed down by creating smooth outer surfaces.This design helps to save precious space and makes these connectors virtually tangle free.There is no visible or exposed metal which eliminates the possibility of electrical arcing between the connector and the inside of a metal conduit.shape due to 2 × 2.2 grid layout of pins (Both are 7 contacts with 3A current rating)Grid Arrangement Smooth ExternalShape No Exposed Metal2. Secure lock mechanismThe friction lock emits a clear tactile click upon lock completion.The design prevents incomplete mating and connector disconnection.The socket lock can be visually checked through the plug window after mating.These indicators function together to prevent incomplete mating.1.Visual Check Area2. Locking is conﬁrmedby an audible click.3. Reliable contact designTwo-point contact design that maintains contact reliability.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces4. Robust contact designThe unique design provides protection to thecontacts and lance areas and it prevents anybending or deformity that might occur duringmating,assembly or transportation.Designed for easycontact insertion.5. Multiple variations availableThere are several different wire counts available,giving the designer a wide variety to choose fromfor the application.Protected lock type,panelmount type and pin header type are alsoavailable.6. Applicator sharingThe applicators for the DF11 and DF59 Series(existing products)can be adapted toaccommodate the DF62 Series applicators.Note 1 :The DF11 Series applicators require part replacement inorder to handle the difference in contact length.However once replaced the applicator can be usedwith DF11,DF59 and DF62.Note 2 :The die and hand tool are used only for the in designatedpurpases.Note 3 :Please contact Hirose for additional details.7. Condensation prevention(Waterproof Type DF62W) IP67 level water-resistance in mated condition. IP67 waterproof equivalent underspecific conditions. Please contact a Hirose representative for detailed specifications and conditions.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62●DF62W●UL File NameUL : E52653C-UL : E52653DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesNote 1 : This is the maximum current rating while all pins are powered or used as all power lines. When isolating power lines into multiplecircuits, current ratings may go above the stated current ratings. Please consult Hirose for details before doing this.Note 2 : Includes the temperature rise of power lines.Note 3 : The connector should be completely dry (no condensation present)Note 4 : The term "storage" refers to the long-term storage condition of unused products before PCB mounting. The operatingtemperature and humidity ranges are applied while in a non-energized state, while in transport or after PCB mounting.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesNote 1 : Waterproof type (DF62W) onlyDF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces■Non-Waterproof Type● ConnectorDF62B -#S -2.2C (##)❶❷❸❹❺❻● ContactDF62-EP 2428PCF A❶❷❸❹❺● ConnectorDF62-#P -2.2DSA (##)❶❷❸❹❺❻Refer to the chart below when determining the product specifications from the product number.Please select from the product numbers listed in this catalog when placing orders.Note : The waterproof type and non-waterproof type are not intermateable.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces● ContactDF62W -EP 2226PCF A❶❷❸❹❺● Waterproof PinDF62W -WP❶❷● ConnectorDF62WZ -#P -2.2DSA (##)❶❷❸❹❺❻■Waterproof Type● ConnectorDF62W -#S -2.2C❶❷❸❹❺DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces9.55AP =2BP=2.2Contact No. MarkingCavity No.7pos. shown as an example.[Specification No. ］ -##,(##)None : White (11) : Black (18) : RedDF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesContact No. Marking Cavity No.P=2.2P=2B A7pos. shown as an example.Part No.HRS No.DF62C-2S-2.2C(##)CL0544-0565-4-##[Specification No. ］ -##,(##)None : White(11) : Black(18) : RedCavity No.Contact No.P=2.2P =2.2B14.05A9pos. shown as an example.Part No.HRS No.DF62W-2S-2.2C CL0544-1002-7-00Note : The waterproof type and non-waterproof type are not intermateable.■ Position Number Pin Configuration (Shown from the Mating Side)122131243213465564312798φ10.4mm φ9.2mm 2pos.3pos.4pos.6pos.9pos.φ10.8mm φ11.6mmφ13.3mmNote : Applicable jacket outer diameter : ⌀1.4 to 1.6mm[Specification No. ］ -##,(##)None : Black (10) : White (18) : RedP =2P=2.2AB16.05Contact No. MarkingCavity No.7pos. shown as an example.Cavity No.Contact No. Marking16.05AB P =2P=2.2Part No.HRS No.DF62P-2EP-2.2C(##)CL0544-0543-1-##[Specification No. ］ -##,(##)None : Black (10) : White (18) : RedContact No.Cavity No.P =2.2P=2.2BA 23.059pos. shown as an example.Part No.HRS No.Note : The waterproof type and non-waterproof type are not intermateable.■ Position Number Pin Configuration (Shown from the Mating Side)312211243546132879231645φ9.7mm φ8.5mm φ10.2mm φ11.5mmφ12.8mm2pos.3pos.4pos.6pos.9pos.Note : Applicable jacket outer diameter : φ1.4 to 1.6mm■ Socket Position Number Pin Configuration (Shown from the Mating Side)212pos.3123pos.34214pos.543125pos.6452136pos.67543127pos.1213111089754631213pos.23242221161718201914151312119810674521324pos.■ Plug Position Number Pin Configuration (Shown from the Mating Side)212pos.3123pos.34214pos.452135pos.5463126pos.67453127pos.1213118109764521313pos.35412910687151413111217161819202423212224pos.■ Position No. DiagramNo.1No.2No.3No.4No.5No.6No.7 No.8No.10No.11No.12No.13No.15No.16No.20No.21No.22No.23No.24●Loose Piece, Applicable Tool : Hand Crimping ToolNote 2 : The applicable cables include only those listed above.(11.15)37.451.51.83●Reel Contact, Applicable Tool : ApplicatorNote 1 : When using cables not specified by Hirose, please contact a Hirose sales representative.1.61.377.83(11.5)●Reel Contact, Applicable Tool : ApplicatorNote 1 : When using cables not specified by Hirose, please contact a Hirose sales representative.Note 2 : There are cases in which use of a flexible wire (thin, stranded conductor or soft jacket material) may make insertion to socket difficult. Please contact a Hirose representative for more information.Note 3 : The waterproof type and non-waterproof type are a not intermateable.●Loose Piece, Applicable Tool : Hand Crimping ToolNote 4 : The applicable cables include only those listed above.Reel Contact, Applicable Tool : Applicator●Loose Piece, Applicable Tool : Hand Crimping Tool●11.63(15.3)1.61.37●Reel Contact, Applicable Tool : ApplicatorNote 1 : When using cables not specified by Hirose, please contact a Hirose sales representative.Note 2 : There are cases in which use of a flexible wire (thin, stranded conductor or soft jacket material) may make insertion to socket difficult. Please contact a Hirose representative for more information.Note 3 : The waterproof type and non-waterproof type are not intermateable.●Loose Piece, Applicable Tool : Hand Crimping ToolNote 4 : The applicable cables include only those listed above.P=2.2Cavity No.Contact No. MarkingContact No.1 MarkingP =2CAB2.6□0.513pos. shown as an example.Part No.HRS No.[Specification No. ］ -##,(##)None : Tin Plating (01) : Gold PlatingNote : Please contact a Hirose representative for requests on gold plating pin count variations that have not been released.■ Recommended PCB Layout (Recommended Thickness t=1.6mm)[13pos.]P=2.2±0.054.4±0.05P=2.2±0.056.6±0.05P =2±0.056±0.05Connector Outline13×φ0.8[24pos.]P=2.2±0.058.8±0.05P=2.2±0.056.6±0.05P =2±0.058±0.05Connector Outline24×φ0.8+0.1-0DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spacest=0.47P=2.2□0.5Contact No.1 MarkingContact No. MarkingP =2B 3.62.4ACCavity No.13pos. shown as an example.Part No.HRS No.[Specification No. ］ -##,(##)None : Tin Plating (01) : Gold PlatingNote : Please contact a Hirose representative for requests on gold plating pin count variations that have not been released.■ Recommended PCB Layout (Recommended Thickness t=1.6mm)[13pos.]P=2.2±0.051.945±0.054.4±0.05P =2±0.056±0.057.45±0.05Connector Outline13×φ0.9+0.1-0P=2.2±0.053.045±0.056.6±0.05φ3±0.05[24pos.]4.145±0.05P=2.2±0.058.8±0.05P =2±0.058±0.059.45±0.05Connector Outline24×φ0.9+0.1-0P=2.2±0.053.045±0.056.6±0.05φ3±0.05DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesP =2.2P=2.2Contact No1. MarkingCavity No.□0.52.8515.5AB9pos. shown as an example.[Specification No. ］ -##,(##)(20) : Tin Plating (50) : Gold Plating■ Recommended PCB Layout (Recommended Thickness t=1.6mm)[9pos.]DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesHRS LogoCAV No.3φ16.529(WaterproofSurface)φ173φ16.5Note : When using without the crimp contact inserted, fill the contact hole of socket and plug with a waterproof pin.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small SpacesDF62●Note 2 : Please conduct crimping work according to the "Crimping Quality Standard" (ETAD-H0642,ETAD-H0643)" and"Crimping Condition Table".Note 3 : The compatible wire is limited to UL1061 (22 AWG).Note 4 : The compatible wire is limited to UL1007 (24 to 28 AWG).Note 5 : The compatible wire is limited to UL1061 (30 AWG).DF62W●Note 1 : Issues with non-Hirose specified tools are outside the scope of warranty.Note 2 : Applicator manufactured by JAPAN AUTOMATIC MACHINE(J.A.M.).Please contact J.A.M. via the URL below regarding inquiries on the applicator or crimp defects.(URL : http://www.jam-net.co.jp)Note 3 : Please conduct crimping work according to the "Crimping Quality Standard" (ETAD-H0762-00, ETAD-H0763-00)" and "Crimping Condition Table".Note 4 : The compatible wire is limited to UL3443 (20 AWG) or UL1007 (22 AWG).Note 5 : The compatible wire is limited to UL1007 (22 to 24 AWG) or UL1430 (24 to 26 AWG).DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces■ Items Required Prior to StartingThe work-related documents listed below are required before starting harness assembly.(The ●mark indicates a required document.)them.When the documents shown below are not available,ask a Hirose sales personnel to provide■ ToolsThe tools specified by Hirose should be used for crimping work.Crimping work by tools other than those specified must not be done because it may result in contact failure, disconnection of cable,etc.The operating instructions manual is available for the crimping machine and the applicator.Be sure to carefully readthe operating instructions manual before implementing the work.■ Applicable Electric WiresCheck that the electric wire to be used is within the applicable range.If you intend to use an electric wire other than those recommended,ask a HRS sales personnel.[Precautions]・Electric wires that are suitable for crimping connectors are tin-plated stranded softcopper wire.・Avoid crimping solid wires,wires with polyester threads or tin-coated wires.・Avoid crimping two electric wires together.・The crimp height setting value (Note)may vary between tin-plated and gold-plated contacts even if the same electric wires are used.・The crimp height setting value (Note)may vary depending on the difference in the core wire configuration even if the computed cross-sectional area is the same.Note : The crimp height is an important item that determines crimping quality. We execute crimping tests for each electric wire to ensure the optimal value forthe crimp height with high precision, thereby ensuring optimal setup values.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces1. Recommended Soldering Conditions ■ Soldering profile when using an automatic soldering deviceSoldering temperature : 260℃ ; Soldering time: no more than 10 seconds■ Hand soldering conditionsTemperature of soldering iron : 300℃ , soldering time : no more than 3 seconds2. Cleaning Conditions Please refer to the "Wire-to-Board Connector Guide".Cleaning with IPA is allowed. (Other cleaning agents are not recommended due to the factthat it may change the push/pull feeling. Please contact us when you use other cleaningagents.)3. Important Notes 1. Caution is required for mating and un-mating the connector without it being mounting on aPCB. Doing so can damage or deform the contacts.2. During hand soldering, do not apply excess amounts of flux which can migrate onto theconnector.3. This product may have a slight differences in color depending on the production lot.This difference does not have any influence on the performance.4. Please refer to "DF62 Series Mating and Unmating Procedure Document" (ETAD-H0599) and"DF62W Series Mating / Unmating Operation Instruction Manual" (ETAD-H0761) for pointson handling during mating operations.4. Handling Instructions Please refer to the "Wire-to-Board Connector Guide".Specifications mentioned in this catalog are reference values.When considering to order or use this product,please confirm the "Drawing"and "Product Specifications"sheets. Use an appropriate cable when using the connector in combination with cables.If considering usage of a non-specified cable,please contact your sales representative.If assembly process is done by jigs &tools which are not identified by Hirose assurance will not be given.Please consult with your Hirose sales representative if you are planning to use the product for any of the following applications.(Automotive,medical,public infrastructure,aerospace/defense,etc.)Hirose will consider the validity of the warranty depending on the conditions.DF62/DF62W Series/2 × 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces[ JAPAN ]HeadquartersHIROSE ELECTRIC CO., LTD Phone : +81-3-3491-7675YOKOHAMA CenterHIROSE ELECTRIC CO., LTD Phone : +81-45-620-3491[ USA ]U.S Headquarters / CHICAGO Oﬃce HIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-630-282-6700/us/SAN JOSE OﬃceHIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-408-253-9640/us/DETROIT Oﬃce (AUTOMOTIVE) HIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-734-542-9963/us/BOSTON OﬃceHIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-978-655-9850/us/DALLAS OﬃceHIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-972-324-3370/us/IRVINE OﬃceHIROSE ELECTRIC ( U.S.A.), INC. Phone : +1-949-930-3750/us/[ THE NETHERLANDS ]EU Headquarters / AMSTERDAM OFFICE HIROSE ELECTRIC EUROPE B.V. Phone : +31-20-6557460/eu/[ UNITED KINGDOM ]UK BranchHIROSE ELECTRIC EUROPE B.V. Phone : +44-1908-202050/eu/[ GERMANY ]GERMAN Branch / STUTTGART OﬃceHIROSE ELECTRIC EUROPE B.V.Phone : +49-711-456002-1/eu/NUREMBERG OﬃceHIROSE ELECTRIC EUROPE B.V.Phone : +49-911-326889-63/eu/HANOVER OﬃceHIROSE ELECTRIC EUROPE B.V.Phone : +49-511-978261-30/eu/[ FRANCE ]PARIS OﬃceHIROSE ELECTRIC EUROPE B.V.Phone : +33-1-85764886/eu/[ ITALY ]MILAN OﬃceHIROSE ELECTRIC EUROPE B.V.Phone : +39-02-36636350/eu/[CHINA ]CHINA Headquarters / SHANGHAI BranchHIROSE ELECTRIC ( CHINA ) CO., LTD.Phone : +86-21-6391-3355/cn/SHENZHEN BranchHIROSE ELECTRIC ( CHINA ) CO., LTD.Phone : +86-755-8207-0851/cn/BEIJING BranchHIROSE ELECTRIC ( CHINA ) CO.,LTD.Phone : +86-10-5165-9332F/cn/[HONG KONG ]HONG KONG OﬃceHIROSE ELECTRICHONGKONG TRADING CO., LTD.Phone : +852-2803-5338/hk/[TAIWAN ]TAIWAN OﬃceHIROSE ELECTRIC (TAIWAN) CO., LTD.Phone : +886-2-2555-7377/tw/[KOREA ]KOREA OﬃceHIROSE KOREA CO.,LTD.Phone : +82-31-496-7000http://www.hirose.co.kr/[SINGAPORE ]SINGAPORE OﬃceHIROSE ELECTRICSINGAPORE PTE. LTD.Phone : +65-6324-6113/sg/[ THAILAND ]BANGKOK Liaison OﬃceHIROSE ELECTRICSINGAPORE PTE. LTD.Phone : +66-2-686-1255/sg/[ MALAYSIA ]PENANG Representative OﬃceHIROSE ELECTRICSINGAPORE PTE. LTD.Phone : +60-4-648-5536/sg/[ INDIA ]BANGALORE OﬃceHIROSE ELECTRIC INDIA PVT. LTD.Phone : +91-80-4120-1907/sg/DELHI OﬃceHIROSE ELECTRIC INDIA PVT. LTD.Phone : +91-120-660-8018/sg/。

Phoenix Contact PTCM 0,5 8-PI-2,5 WH 连接器说明书

03/15/2019 Page 1 / 8PCB connector, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm,connection method: Crimp connection, color: white Your advantages White design: Stable color when welding and during use High current carrying capacity of 6 A in very compact dimensions Inverted connector with pin contacts for touch-proof device outputs or free-hanging cable/cable connections Cost-effective connection of crimped conductors in large quantitiesTools for manual and automatic crimping available as an optionKey Commercial DataTechnical dataItem propertiesElectrical parametersConnection capacityMaterial data - housingDimensions for the productPackaging informationAmbient conditions03/15/2019 Page 2 / 8Termination and connection method Mechanical tests according to standardAir clearances and creepage distancesCurrent carrying capacity / derating curves Mechanical tests (A)Durability tests (B)03/15/2019 Page 4 / 8Climatic tests (D)Environmental and durability tests (E)Environmental Product ComplianceDrawingsDiagramAmbient temperature [°C]C u rr e n t s t r e Type: PTCM 0,5/...-PL-2,5 WH with PTCM 0,5/...-PI-2,5 WHClassificationseCl@ss03/15/2019 Page 5 / 8ETIMApprovals ApprovalsApprovals cULus Recognized Ex ApprovalsApproval detailsAccessoriesAccessoriesCrimp contactAccessories - PTCM-MP-PI 0,34-0,75 R - 1013987Crimp contact, type of contact: Male connector, connection method: Crimp connection, contact surface: Tin, type of packaging: Taped on roll03/15/2019 Page 6 / 8Crimp contact, type of contact: Male connector, connection method: Crimp connection, contact surface: Tin, type of packaging: Taped on rollAccessories - PTCM-MP-PI 0,34-0,75 - 1013989Crimp contact, type of contact: Male connector, connection method: Crimp connection, contact surface: TinAccessories - PTCM-MP-PI 0,14-0,5 - 1013990Crimp contact, type of contact: Male connector, connection method: Crimp connection, contact surface: TinCrimping toolCrimping pliers - CRIMPFOX-P CC 0.75 L - 1064998Crimping pliers, for COMBICON crimp connectors with cross section: 0.14 ... 0.75 mm². Unlockable pressure lock,precise parallel crimping, front entry, B crimp, incl. 2 positioning aidsAdditional productsPrinted-circuit board connector - PTSM 0,5/ 8-P-2,5 WH - 1704861PCB connector, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, connection method: Push-in spring connection, color: white, contact surface: Tin03/15/2019 Page 7 / 8Feed-through header - PTSM 0,5/ 8-HHI-2,5-SMD WHR44 - 1708001PCB headers, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, color: white,contact surface: Tin, mounting: SMD soldering, Article with anti-rotation pinFeed-through header - PTSM 0,5/ 8-HHI0-2,5-SMD WHR44 - 1815251PCB headers, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, color: white,contact surface: Tin, mounting: SMD solderingFeed-through header - PTSM 0,5/ 8-HHI-2,5-THR WH R32 - 1815044PCB headers, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, color: white,contact surface: Tin, mounting: THR solderingPrinted-circuit board connector - PTSM 0,5/ 8-PL-2,5 WH - 1709465PCB connector, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, connection method: Push-in spring connection, color: white, contact surface: TinPrinted-circuit board connector - PTCM 0,5/ 8-PL-2,5 WH - 1015458PCB connector, nominal current: 6 A, rated voltage (III/2): 160 V, number of positions: 8, pitch: 2.5 mm, connection method: Crimp connection, color: white03/15/2019 Page 8 / 8。

部品用途及性能简介

实物上标示PIN NO. 厦门睿和电子有限公司
三.端子
•描述 Terminal，指接线终端。主要作用是传递电信号或导电用 • 端子一般由本体、足部（前足/后足）、定位/锁紧机构组成
•公母端子的区分：本体部分被包裹的端子一般为公端子，反正为母端子
本体后足
定位结构
前足前足本体
本体：与对手件接触的部位,连接线束之间足部：前足用于固定电线，使端子与电线导体充分接触后足用于固定电线绝缘外被定位结构：用于保证端子与连接器之间的相对位置锁紧结构：用于放置端子与连接器之间脱离
电镀用锡铅/锡铜合金用于较低档次产品 1.锡具有较好的抗腐蚀, 抗变色, 而且无毒, 可焊, 柔软和延展性好等优点 2. 锡镀层在特定环境中能生长“锡须”, 所以加入少量的铅与锡进行共沉积电镀, 然后用加热方法去除应力, 这能防止“锡须”生长（不过铅是重金属）现因为环保的趋势, 业界已逐渐改用锡铜合金取代在基体材料是黄铜时, 应先镀镍或铜作底镀层。高档次产品接触区域的关键部位--电接触点用贵金属镀层材料
•连接器-端子生产厂家主要生产产品
1. Tyco---(1998年收购AMP) 产品的产业分布较广，在汽车、电脑及周边、工业方面比较强； 2. Molex---主要是消费类电子连接器; 3. Amphenol---主要在军工，航天／航空，通信方面; 4. FCI---又叫法马通，主要在通信连接器及汽车连接器方面比较强; 5. Samtac---最有名的是板对板产品（排针，排母等）; 6. JAE---日本航空电子，主要做电脑周边，汽车连接器及通信连接器等; 7. Phoenix---德国的公司，在端子台方面很有名，但价格不菲； 8. 3M----美国公司，在光纤HOT MELT方面，有很强的专利技术，另外MBR连接器等也不错； 9. Yazaki---日本公司，主要在汽车连接器； 10. JST---主要是做线到板的端子，胶壳及WAFER等， 11. Hirose---日本广濑，除了军工、航天／航空没有涉及外，其他行业都有做到了 12. Foxconn---台资，在电脑及周边产业做连接器很厉害； 13. Delphi.---美国公司，基本只做汽车连接器 14. ERNI---德资公司，主要做通信连接器及DIN41612等。 15. SUMITOMO---住友，主要做汽车连接器 16. HY---韩国然湖，主要仿MOLEX，JST等的线到板产品； 17. KET---韩国公司，也是主要仿MOLEX，JST等的线到板产品； 18. ITT---日本的，现在主要见到的是他在手机等移动数码产品上的连接器。 19. HARTING---德国哈丁，主要是工业连接器，如DIN41612, HARD METRIC等厦门睿和电子有限公司

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Int'l Sales Dept.ext 6202 Int'l Sales Dept.ext 6205 Int'l Sales Dept.ext 6206 Int'l Sales Dept.ext 6207 Int'l Sales Dept.ext 6209
Skype: hulane-jimmy Skype: michelle_tsai21 Skype: naomi6206 Skype: nick-hulane Skype: samhylin
Contact your Service window (Sales Rep.) For getting more information on new products ! ! !
ሗၾઆุٙਕ೿ɹ聯ഖ ˸՟੻更༉୚ٙอପۜ༟ৃ
Taiwan Market ̨ᝄήਜ:-
ุਕದ౻బ
Email: yucf@
N/A
PBT/GREEN 綠Ѝ
Aug. 2008 S/No ҏ໮
9
Fig. ๫˪
Part Number ۜ໮ 3MID11MW
Wire Range ᇞࢰ
Surface ‫ࠦڌ‬ Treatment ஈ理
Material ҿ料 Standard /colour ᕙЍ Pack ̍ༀ
Pages ࠫ數: 3/4
3NS12FW
N/A
PBT/WHITE ͣЍ
6617032KSS
NISSAN Automotive (Paladin)
TPA: PBT/WHITE
˚ପӛ車/֮拉ɕ
ͣЍ
Door Harness
‫ژ‬ᇞ
11
3NSA12FGY
N/A
PBT/GREY ϲЍ
6617032KSS
NISSAN Automotive (Paladin)
New products Release อۜપ̈ (Aug. 2008)
Part Number ۜ໮ 3MIE06FBRM02BR 3MIE06FBRC06BL
Wire Range ᇞࢰ Material ҿ料 Standard
Surface ‫ࠦڌ‬ Treatment ஈ理
/colour ᕙЍ Pack ̍ༀ
Parts Usage / Application ͜ ௄
3DRA06FBRM14BR N/A
PPO/BROWN ಅЍ
3DRA06MBR14BR Car Lamp Hanress
車ዱᇞଡ଼
3DRA06FBRC14RD N/A
PPO/RED ߎЍ
5
3DRA06MBRM14BR N/A
PPO/BROWN ಅЍ
** ISO/TS 16949, ISO 14001 Certificated ** ShangHai GM GP-10 Certificated
Prepared by : Market Plan & Development Dept. Sarah Liao / sarah@ Aug 16, 2008
POM/BLACK ලЍ
6895403PS0
ShangHai General Motor
ɪऎஷ͜ӛ車
3SBL02MBC07BK N/A
POM/BLACK ලЍ
Seat belt switch
τΌ੭ᇞҼකᗫ
8
3RS02FGYM06GR N/A
PBT/GREY ϲЍ
6617047~8KSS
3RS02FGYC06G
International Market ਷̮̹ఙ:-
Mr. Jimmy Lu
Email: Jimmy_Lu@
Ms.e@
Ms. Naomi Peng
Email: naomi@
TPA: PBT/WHITE
˚ପӛ車/֮拉ɕ
ͣЍ
Door Harness
‫ژ‬ᇞ
12
6845106BS7
2.00-3.00 mm2
N/A
2000PCS/R 3SHB02MBM05BK
Car A/C Compressor Connector
6845107BS7
Pre-Tin 0.85-1.25 mm2
3DRA06FBRM14BRCar Lamp Hanress
3DRA06FBRC14RD車ዱᇞଡ଼
6
3TSL03FW
N/A
PA66/WHITE රͣЍ
6895202KSS
3TSL03MW
Honda Motorcycle
Honda ዚ車
Alternator Harness ೯ཥዚ
7
3SBL02MBM07BK N/A
3SHB02MBC05BK
ӛ車冷ंᏀᐵዚ連ટኜ
Pre-Tin
13
51208BL2
5.00 mm2
N/A
500PCS/BAG Screw 螺ക
Honda Motorcycle
Tin-Plating
Honda ዚ車
Battery Cable
ཥଧᇞ
Aug. 2008
Pages ࠫ數: 4/4
The products with " * " are private article of customers which can be sold under customers' permission. Ϟ া໮˾‫˒܄ڌ‬ʘӷϞۜ ຾‫˒܄‬Νจ‫ܝ‬у̙ࠈᒅ
Tel: 86-755-27714803 Tel: 86-21-59567023
Tel: 86-23-67188641 Tel: 86-755-27714803
ʱዚ 8628
--------------
-------------ʱዚ 8618
ShenZhen ଉέ ߡ連ၚ੗ٰ΅Ϟࠢʮ̡ଉέ፬ʮ‫܃‬ ShangHai ɪऎ ߡ連ၚ੗ٰ΅Ϟࠢʮ̡ɪऎ፬ԫஈ NanJing ‫ی‬ԯ ߡ連ၚ੗ٰ΅Ϟࠢʮ̡ࠠᅅ፬ԫஈ ChongQingࠠᅅ ଉέ̹連ઠྼุϞࠢʮ̡ HongKong ࠰ಥ ଉέ౷Έ൱易Ϟࠢʮ̡
PBT/GREY ϲЍ
6619223KSS
Geely FC1
TPA:PBT/WHITE
6618022BSS
Λ利ӛ車
ͣЍ
Car Central Lock & Lamp Harness
ӛ車ʕછ‫ژ‬ʿɽዱᇞҼ
Aug. 2008 S/No ҏ໮
4
Fig. ๫˪
Pages ࠫ數: 2/4
Part Number ۜ໮
Mr. Nick Chen
Email: nick@
Ms. Samantha Lin
Email: samantha@
Tel: 886-2-26940551 Tel: 886-2-26940551 Tel: 886-2-26940551 Tel: 886-2-26940551 Tel: 886-2-26940551
Wire Range ᇞࢰ
Surface ‫ࠦڌ‬ Treatment ஈ理
Material ҿ料 Standard /colour ᕙЍ Pack ̍ༀ
Applicable ৣ͜ Opposite ࿁˓ Connectorᇭଷ/ Connectorᇭଷ/ Terminal၌ɿ Terminal၌ɿ
N/A
PA/BROWN ಅЍ
N/A
PBT/BLUE 藍Ѝ
Pages ࠫ數: 1/4
Applicable ৣ͜ Opposite ࿁˓ Parts Usage / Application ͜
Connectorᇭଷ/ Connectorᇭଷ/ Terminal၌ɿ Terminal၌ɿ
௄
6617652BSS
Car Lamp Hanress
車ዱᇞଡ଼
2
3TKF26FWGR N/A
PBT/GREY ϲЍ
6619223KSS
Geely FC1
TPA:PBT/WHITE
6618022BSS
Λ利ӛ車
ͣЍ
Car Central Lock & Lamp Harness
ӛ車ʕછ‫ژ‬ʿɽዱᇞҼ
3
3TKF26FGY
N/A
ุਕ೻‫ڲ‬ಝ
Email: jamecheng@
ุਕ৷˖຃
Email: zoe@
Tel: 886-2-26940551 Tel: 886-2-26940551 Tel: 886-2-26940551
ʱዚ 6101 ʱዚ 6103 ʱዚ 6105
Applicable ৣ͜ Opposite ࿁˓ Connectorᇭଷ/ Connectorᇭଷ/
Parts Usage / Application ͜ ௄
Terminal၌ɿ Terminal၌ɿ
N/A
PA66+GF/WHITE
6840101~2BSS
IKCO Diesel
ͣЍ
ˋɻʿ̔車ᇞҼ
10
਷ʫ௅ ਷ʫ௅ ਷ʫ௅
ߡ連ၚ੗ٰ΅Ϟࠢʮ̡̨ᝄᐼʮ̡
China Market ʕ਷ɽ陸ήਜ:-
ุਕߡ๕ᆐ
Email: huyt@
ุਕю֚௫
Email: cjwu@
ุਕᘌν‫ݰ‬
Email: yrq@
ุਕ"MJDF-FF Email: alicelee_hk@
Aug. 2008 S/No ҏ໮
1
Fig. ๫˪
Address: No.68, Huanhe St., Sijhih City, Taipei County 22154, Taiwan TEL.: 886 2 2694 0551 FAX.: 886 2 2694 2526 / 2694 6248 )UUQXXXIVMBOFDPNUX&NBJMNBSLFUJOH!IVMBOFDPNUX