SMC Parts List SMC 配件单
日本SMC供应清单
品牌 SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC
名称 单向阀 单向阀 油雾器 油雾器 油雾器 油雾器 油雾器 油雾器 油雾器 油雾器 水分分离器 水分分离器 消音器 消音器 消音器 消音器 消音器 消音器 快排阀 快排阀 快排阀 减压阀 减压阀 减压阀 减压阀
数量 10 5 5 5 10 5 10 5 2 2 2 2 2 2 2 2 5 5 5 5 2 2 2 2 2
单位 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个 个
序号 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
型号 AF20-02-A AF20-02C-A AF30-02-A AF30-02D-A AF30-03-A AF30-03D-A AF40-04-A AF40-04D-A AF40-06-A AF40-06D-A AF50-06 AF50-06D AF50-10 AF50-10D AF60-10 AF60-10D AFD20-02-A AFD30-02-A AFD30-03-A AFD40-04-A AFM20-02-A AFM30-02-A AFM30-03-A AFM40-04-A AFM40-06-A
品牌 SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC SMC
名称 接头 接头 接头 接头 接头 接头 接头 接头 接头 接头 接头 接头 接头 接头 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀 电磁阀
SMC电缸LEY维修包清单
[締付けトルク] 1.5N・m [締付けトルク] 3N・m [締付けトルク] 5.2N・m [締付けトルク] 12.5N・m [締付けトルク] 1.5N・m [締付けトルク] 3N・m [締付けトルク] 5.2N・m [締付けトルク] 12.5N・m [締付けトルク] 1.5N・m [締付けトルク] 3N・m [締付けトルク] 5.2N・m [締付けトルク] 12.5N・m [締付けトルク] 12.5N・m [締付けトルク] 1.5N・m [締付けトルク] 3N・m [締付けトルク] 5.2N・m
LEY*25*S6*-*B
LEY*32*S7*-*B
LEY*63*S8*-*B
LEY16* LEY25* LEY32*/LEY40*
フート、 ボルト類
LEY63*
LEY16*/LEY16D* LEY25*/LEY25D* LEY32*/LEY32D*/LEY40*/LEY40D*
フランジ、 ボルト類
[締付けトルク] 3N・m
[締付けトルク] 3N・m [締付けトルク] 0.36N・m [締付けトルク] 0.63N・m 締付けトルク] 1.5N・m [締付けトルク] 0.36N・m [締付けトルク] 0.63N・m [締付けトルク] 1.5N・m [締付けトルク] 1.5N・m
[締付けトルク] 3N・m源自プーリ、 ボルト類LEY63*S*L-*
LEY(G)32*NY*
LEY(G)32*NW* LEY(G)16**-*[ _ /C]
LEY(G)25**-*[ _ /C]
LEY(G)32**-*[ _ /C]
LEY(G)40**-*[ _ /C]
LEY(G)16**-*[B/W] LEY(G)25**-*[B/W] LEY(G)32**-*[B/W] LEY(G)40**-*[B/W]
SMC样本
AW
AL
AC30A-A AC40A-A AC40A-06-A
P.7
Air Combination
AF
AR
AC25B-A AC30B-A AC40B-A AC40B-06-A
P.11
Air Filter + Mist Separator + Regulator
AF
AFM
AR
AC20C-A AC25C-A AC30C-A AC40C-A AC40C-06-A
P.28
Air Filter
AFM
Mist Separator
AFM20-A AFM30-A AFM40-A AFM40-06-A
P.28
AFD
Micro Mist Separator
AFD20-A AFD30-A AFD40-A AFD40-06-A
P.28
AR
AR20-A AR25-A AR30-A
P.56
Lubricator
AW
AW20-A AW30-A AW40-A AW40-06-A
P.62
Filter Regulator
Simple Specials System
A system designed to respond quickly and easily to your special ordering needs
Resin body does not rust.
Regulator: AR Filter Regulator: AW
Pressure drop: Max.
Outlet pressure (MPa)
New AR20-02-A
AR
SMC气缸型号以及附件连接形式
※导线长度表示记号0.5m ……………无记号 （例）M9NW 1m …………… M （例）M9NWM 3m …………… L （例）M9NWL 5m …………… Z （例）M9NWZ 无…………… N （例）H7CN ※带"O"的无触点磁性开关按订货生产。
※除本表型号外，还可能安装的磁性开关参见P.16。
※导线前置插头的磁性开关参见《Best Pneumatics 》第二册P.1328、1392。
※D-A9□（V ）, M9□（V ）, M9□W （V ）,M9□A （V ）型磁性开关一同包装出厂（未组装）。
（但磁性开关安装件组装出厂。
）※※※防水性强型磁性开关，可以安装在上述产品上，但是不能由此保证上述产品的防水性。
在防水坏境下，推荐使用具有防水性的产品。
其中，关于ø20、ø25的防水性产品，请联系本公司型号表示方法N N 带磁性开关气缸行程（※※安装件和气缸一同包装出厂。
※安装件F, G, L, D 对应的气缸为Z ：基本型（无耳轴安装用螺孔）。
※杆端螺纹形状为内螺纹时，无连接件。
※杆端连接件和气缸一同包装出厂。
※单肘节接头中不包含销轴。
RoHS1气缸/标准型 ：单杆双作用ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100CG1 系列乐清市顺力气动有限公司ｈｔｔｐ：／／ｗｗｗ．ｓｌｑｄ．ｃｎ乐※对于ø80, ø100，没有基本型（无耳轴安装用螺孔）、杆侧耳轴型、无杆侧耳轴型。
对于ø20~ø63的脚座型、法兰型、耳环型，没有耳轴安装用内螺纹。
使用时，请不要超过允许动能。
详细情况请参考P.4。
缸径（mm ）动作方式给油使用流体耐压试验压力最高使用压力最低使用压力环境温度及使用流体温度使用活塞速度行程长度允差缓冲安装形式※单杆双作用不要（不给油）空气1.5MPa1.0MPa 0.05MPa 无磁性开关：−10℃~70℃（未冻结时）带磁性开关：−10℃~60℃~200st mm （ø20）~300st mm （ø25~ø100）垫缓冲0.28J 0.11J0.41J 0.18J0.66J 0.29J1.20J 0.52J2.00J 0.91J3.40J 1.54J5.90J 2.71J9.90J 4.54J ＋1.40＋1.40基本型、基本型（无耳轴安装用螺孔）、轴向脚座型、杆侧法兰型、无杆侧法兰型、杆侧耳轴型、无杆侧耳轴型、耳环型（通口位置作90°变更时使用）※ø80, ø100没有杆侧耳轴型和无杆侧耳轴型。
smc材料成分
smc材料成分SMC材料成分。
SMC材料是一种常用的复合材料，它由树脂、增强材料和填料组成。
在SMC材料的制备过程中，这些成分起着至关重要的作用，决定了最终产品的性能和特点。
首先，树脂是SMC材料的主要成分之一。
树脂通常采用不饱和聚酯树脂，它具有良好的成型性能和耐候性，能够满足复杂零部件的成型要求。
同时，树脂还能够与增强材料和填料有效地粘合在一起，形成坚固的结构。
在SMC材料的制备过程中，树脂的选择和使用对最终产品的质量和性能有着重要的影响。
其次，增强材料是SMC材料中的另一个重要成分。
常见的增强材料包括玻璃纤维、碳纤维等。
这些增强材料能够有效地提高SMC材料的强度和刚度，使其具有优异的机械性能和抗冲击性能。
同时，增强材料的选择和使用也能够影响到SMC材料的成型工艺和成型效果，因此在制备过程中需要进行合理的搭配和控制。
最后，填料是SMC材料中不可或缺的成分之一。
填料的种类和使用量会直接影响到SMC材料的密度、导热性能和表面质量。
常见的填料包括无机填料和有机填料，它们能够有效地改善SMC材料的流动性和成型性能，同时还能够调节材料的收缩性和热稳定性，使其更加适合复杂零部件的成型。
综上所述，SMC材料的成分包括树脂、增强材料和填料，它们共同作用于SMC材料的制备过程中，决定了最终产品的性能和特点。
在实际应用中，需要根据具体的要求和工艺条件，合理选择和搭配这些成分，以获得满足需求的高质量SMC制品。
同时，对于SMC材料的成分和性能特点也需要进行深入的了解和研究，以推动其在各个领域的应用和发展。
SMC 气动元件产品说明书
VR12F-TF222-005ENPage 1 of 1Instruction ManualAND Valve with One-touch FittingsThe intended use of this product is to control pneumatic signal lines.These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) *1), and other safety regulations. *1)ISO 4414: Pneumatic fluid power - General rules relating to systems. ISO 4413: Hydraulic fluid power - General rules relating to systems.IEC 60204-1: Safety of machinery - Electrical equipment of machines. (Part 1: General requirements)ISO 10218-1: Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots.• Refer to product catalogue, Operation Manual and Handling Precautions for SMC Products for additional information. • Keep this manual in a safe place for future reference.Warning • Always ensure compliance with relevant safety laws and standards.• All work must be carried out in a safe manner by a qualified person in compliance with applicable national regulations.2 SpecificationsNote 1) Use caution when the maximum operating pressure is used with soft nylonand polyurethane. Depending on the temperature, these tubes have a lower operating pressure. Refer to the specification of the tubes.Note 2) Two axes (horizontal and vertical) and two directions were tested, and nomalfunction of the valve occurred (pulse shape: sine shape), 3 times (test sample mounted with bracket).Note 3) No malfunction occurred in a sweep cycle test between 10 to 150 Hz atvibration sweep 0.35 mm. The test was performed in the two axes and two directions, 7 min per cycle (20 cycles).Note 4) Brass components are all electroless nickel plated as standard. (Copper-free and fluorine-free)2.2 Response timeValve response time depends on the overall circuit design, so it must be determined by the circuit designer. 2.3 Special productsWarningSpecial products (-X) might have specifications different from those shown in this section. Contact SMC for specific drawings.3 Installation3.1 InstallationWarning• Do not install the product unless the safety instructions have been read and understood. 3.2 EnvironmentWarning• Do not use in an environment where corrosive gases, chemicals, salt water or steam are present.• Do not use in an explosive atmosphere.• Do not expose to direct sunlight. Use a suitable protective cover.• Do not install in a location subject to vibration or impact in excess of the product’s specifications.• Do not mount in a location exposed to radiant heat that would result in temperatures in excess of the product’s specifications.• Do not use in high humidity environment where condensation can occur.• Contact SMC for altitude limitations.3.3 Operating pressure conditions• Only when air is supplied to both P1 and P2 does air flow to the OUT side.• When air pressure differs, the lower pressure flows to the OUT side.Figure 1.• If air is supplied only to either P1 or P2, it does not flow to the OUT side.Figure 2.Warning• Air may flow to the OUT side for a moment until the valve switches (About 1/100 second). If there is any effect on the connected equipment due to the above air flow, install a speed controller, etc, on the OUT side, and adjust to prevent this effect before use.3.4 PipingCaution• Before connecting piping make sure to clean up chips, cutting oil, dust etc.• When installing piping or fittings, ensure sealant material does not enter inside the port. When using seal tape, leave 1 thread exposed on the end of the pipe/fitting.• Stop using the equipment immediately when air leaks are large enough to be audible, or when the equipment does not operate properly. Perform appropriate function and leakage tests.• Check periodically that piping is not loosened and that there is no air leakage.• Regularly check that there is no external damage.• When connecting tubes using One-touch fittings, provide some spare tube length.• Do not apply external force to the fittings when binding tubes with bands.Caution• SMC products have been lubricated for life at manufacture, and do not require lubrication in service.• If a lubricant is used in the system, refer to catalogue for details. 3.5 Air supplyWarning• Use clean air. If the compressed air supply includes chemicals, synthetic materials (including organic solvents), salinity, corrosive gas etc., it can lead to damage or malfunction.Caution• Install an air filter upstream of the valve. Select an air filter with a filtration size of 5 μm or smaller.4 How to OrderRefer to catalogue for ‘How to Order’.5 Outline DimensionsRefer to catalogue for outline dimensions.6 Maintenance6.1 General maintenanceCaution• Not following proper maintenance procedures could cause the product to malfunction and lead to equipment damage.• If handled improperly, compressed air can be dangerous.• Maintenance of pneumatic systems should be performed only by qualified personnel.• Before performing maintenance, turn off the power supply and be sure to cut off the supply pressure. Confirm that the air is released to atmosphere.• After installation and maintenance, apply operating pressure and power to the equipment and perform appropriate functional and leakage tests to make sure the equipment is installed correctly.• If any electrical connections are disturbed during maintenance, ensure they are reconnected correctly, and safety checks are carried out as required to ensure continued compliance with applicable national regulations.• Do not make any modification to the product.• Do not disassemble the product, unless required by installation or maintenance instructions.7 Limitations of UseWarningThe system designer should determine the effect of the possible failure modes of the product on the system.7.1 Limited warranty and disclaimer/compliance requirements Refer to Handling Precautions for SMC Products.Warning7.2 Effect of energy loss on valve state• The valve is an AND logic element in an all-air circuit. When the air pressure is cut to both inputs the valve goes into an undefined state. Backflow of air from out to in port may occur under this condition.• It is the responsibility of the system designer to determine the effect in the system when air pressure is cut and when it is restored. 7.3 Cannot be used as an emergency shut-off valveThis product is not designed for safety applications such as an emergency shut-off valve. If the valves are used in this type of system, other reliable safety assurance measures should be adopted.7.4 Holding of pressureSince valves are subject to air leakage, they cannot be used for applications such as holding pressure (including vacuum) in a system.Caution7.5 Low temperature operationUnless otherwise indicated in the specifications for each valve, operation is possible to -5˚C, but appropriate m easures should be taken to avoid solidification or freezing of drainage and moisture, etc.8 Product DisposalThis product shall not be disposed of as municipal waste. Check your local regulations and guidelines to dispose this product correctly, in order to reduce the impact on human health and the environment.9 ContactsRefer to or www.smc.eu for your local distributor/importer.URL : https:// (Global) https:// www.smc.eu (Europe) SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JapanSpecifications are subject to change without prior notice from the manufacturer. © 2022 SMC Corporation All Rights Reserved. Template DKP50047-F-085MORIGINAL INSTRUCTIONS2 (OUT)(IN) 1 (IN) 1IN P 1 IN P 2 OUT OUTOUT IN P 1 IN P 2 IN P 1 IN P 2。
SMC电磁阀样本
3.2
0.30 0.80
注) 2位单电控、4/2→5/3 (A/B→R1/R2)的值。
适合缸径 (mm)
~ø50
~ø80
插座引出方向
上方引出
可快速变更(F.P组件)
只要压一下手动按钮，插座的引出方向便可由上方变更成侧向。 由侧向变为上方的场合，不用手动操作按钮。
侧向引出
丰富的集中配线方式
S 组件 (串行传送)
F P T 组件 (D型辅助插座)
组件 (扁平电缆插座)
组件 (端子台盒)
L 组件 (导线引出)
M 组件 (多针插座)
EX5se0ri0es
25针
26针
保护构造
20针
可对应IP67
保护构造 可对应IP67
● 为了配线作业及维护容易，6种方式已标准化，4种方式的保护构造对应IP67。 ● 对S组件，有输入输出形式。(网关单元除外)
注3)英制尺寸为以下记号。
·N1: ø1/8"
·N3: ø5/32"
·N7: ø1/4"
·NM: 混合
上配管弯头为LN□、下配管弯头为BN□。
端板种类(仅对应EX600的S组件记入)
无记号 无端板 2 电源M12插头(最大供给电流 2A) 3 电源7/8英寸插头(最大供给电流 8A)
注)无SI单元的场合为无记号。
5通电磁阀
插口连接集装式
间隙密封·弹性密封
省功率
标准:0.4W
60 (与本公司原来产品相比降低
%)
0.95 高压(1MPa、间隙密封):
W
新产品
保护构造可对应IP67
[可选项]
RoHS对应
VQC1000/2000 系列
SMC部分产品型号
SMC三杆气缸MGPM40-20 SMC三杆气缸MGPM40-30 SMC三杆气缸MGPM40-40 SMC三杆气缸MGPM40-50 SMC三杆气缸MGPM40-75 SMC三杆气缸MGPM40-100 SMC三杆气缸MGPM50-10 SMC三杆气缸MGPM50-20 SMC三杆气缸MGPM50-30 SMC三杆气缸MGPM50-40 SMC三杆气缸MGPM50-50 SMC三杆气缸MGPM50-75 SMC三杆气缸GPM63-100 SMC三杆气缸MGPM50-100 SMC三杆气缸MGPM63-10 SMC三杆气缸MGPM63-20 SMC三杆气缸MGPM63-30 SMC三杆气缸MGPM63-40 SMC三杆气缸MGPM63-50 SMC三杆气缸MGPM63-75 MGPL12-10 SMC薄型带导杆气缸 MGPL12-2 SMC薄型带导杆气缸 0 MGPL12-30 SMC薄型带导杆气缸 MGL12-40 SMC薄型带导杆气缸 MGPL12-50 SMC薄型带导杆气缸 MGPL12-75 SMC薄型带导杆气缸 MGPL12-100SMC薄型带导杆气缸 MGPL16-10 SMC薄型带导杆气缸 MGPL16-20 SMC薄型带导杆气缸 MGPL16-30 SMC薄型带导杆气缸
63、气爪（平行开闭型）/圆柱形爪体：MHS?3系列 64、气爪（平行开闭型）/中心贯通孔：MHSH3系列 65、气爪（平行开闭型）/圆柱形爪体：MHS4系列 66、气爪（支点开闭型）/标准型：MHC?2系列 67、气爪（支点开闭型）/肘节型：MHT2系列 68、气爪（支点开闭型）/凸轮式180°开闭：MHY2系列 69、气爪（支点开闭型）/齿轮式180°开闭：MHW2系列 70、薄型气爪：MHF2系列 71、抖料气爪：MIW/MIS系列 72、摆动气爪：MRHQ系列 73、微型带导杆气缸：MGJ系列 74、新薄型带导杆气缸：MGP系列 75、薄型带导杆气缸：MGQ系列 76、带导杆气缸/基本型：MGG系列 77、带导杆气缸/小型：MGC系列 78、导台式气缸MGF系列 79、滑台式气缸：CXT系列 80、带摆台气缸：MGT系列 81、倍力气缸：MGZ系列 82、小型气动滑台：MXJ系列 83、小型精密气动滑台：MXP系列 84、小型气动滑台（长行程型）：MXY系列 85、小型气动滑台（直线导轨）：MXH系列 86、气动滑台（十字滚柱导轨）/双缸型：MXS系列 87、气动滑台（循环式直线导轨）/双缸型：MXQ系列 88、小型气动滑台（直线导轨）：MXU系列 89、超薄型气动滑台（十字滚柱导轨）：MXF系列 90、精确气动滑台（循环式直线导轨）：MXW系列 91、高精度气缸：MTS系列 92、止动气缸/安装高度固定型：RSQ系列 93、止动气缸/安装高度可调型：RSG系列 94、重载型止动气缸：RSH/RS1H系列
SMC 产品说明书
Other SettingsSummary of Product partsSimple Setting ModeTroubleshootingNote: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.© 2015 SMC Corporation All Rights ReservedAkihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPANPhone: +81 3-5207-8249 Fax: +81 3-5298-5362URL Specifications/Outline with Dimensions (in mm)Refer to the product catalogue or SMC website (URL ) formore information about the product specifications and outline dimensions.PS※※-OMS0008-A InstallationMounting with bracketMount the bracket to the body with mounting screws (Self tapping screws:Nominal size 3 x 8L (2 pcs)), then set the body to the specified position.∗: Tighten the bracket mounting screws to a torque of 0.5±0.05 Nm.Self tapping screws are used, and should not be re-used several times.∗: The panel mount adapter can be rotated through 90 degrees for mounting.•Bracket A (Part No.: ZS-46-A1)•Bracket B (Part No.: ZS-46-A2)Mounting with panel mount adapterMount part (a) to the front of the body and fix it. Then insert the body with (a)into the panel until (a) comes into contact with the panel front surface. Next,WiringWiring connectionsConnections should be made with the power supply turned off.Use a separate route for the product wiring and any power or high voltagewiring. Otherwise, malfunction may result due to noise.If a commercially available switching power supply is used, be sure toground the frame ground (FG) terminal. If the switching power supply isconnected for use, switching noise will be superimposed and it will not beable to meet the product specifications. In that case, insert a noise filtersuch as a line noise filter/ferrite between the switching power supplies orchange the switching power supply to the series power supply.How to use connectorstraight out.OUT1NCNCDC(-)PipingTightening the connection threadFor connecting to the body (piping specification: -M5)After hand tightening, apply a spanner of the correctsize to the spanner flats of the piping body, and tightenwith a 1/6 to 1/4 rotation.As a reference, the tightening torque is 1 to 1.5 Nm.(When replacing the piping adapter ZS-39-N∗, tighten itusing the same method.)Piping specification: -01, -N01After hand tightening, hold the hexagonal spanner flatsof the pressure port with a spanner, and tighten with 2 to3 rotations.As a reference, the tightening torque is 3 to 5 Nm.When tightening, do not hold the Z/ISE20 body with aspanner.Default settingsWhen the pressure exceedsthe set value, the switch will beturned on. When the pressurefalls below the set value by theamount of hysteresis or more,the switch will be turned off.The default setting is to turn onthe pressure switch when thepressure reaches the centre of the atmospheric pressure and upper limit of therated pressure range. If this condition, shown to the right, is acceptable, then keepthese settings.Error indication functionThis function is to display error location and content when a problem or error has occurred.than above are displayed, please contact SMC.Refer to the SMC website (URL ) for more informationabout troubleshooting.button between1 and 3 sec.button between3 and 5 sec.∗:The outputs will continue to operate during setting.∗:If a button operation is not performed for 3 seconds during the setting, the display will flash.(This is to prevent the setting from remaining incomplete if, for instance, an operator were to leaveduring setting.)∗:3 step setting mode, simple setting mode and function selection mode settings are reflected eachother.[3 step setting mode (hysteresis mode)]orsetting can be changed in the same way.button once when the item toThe set value on the sub display (right) willstart flashing.orbutton and can be reduced withbutton.buttons are pressed and held simultaneously for 1second or longer, the set value is displayed as [- - -], and the set value will bethe same as the current pressure value automatically (snap shot function).button.button to complete the setting.The Pressure switch turns on within a set pressure range (from P1L to P1H) duringwindow comparator mode.Set P1L, the lower limit of the switch operation, and P1H, the upper limit of theswitch operation and WH1 (hysteresis) following the instructions given above.(When reversed output is selected, the sub display (left) shows [n1L] and [n1H].)∗:Setting of the normal/reverse output switching and hysteresis/window comparator modeswitching are performed with the function selection mode [F 1] OUT1 setting.valuePeak/bottom value indicationbutton inmeasurement mode.Snap shot functionbuttons for 1second or longer simultaneously. Then, the set value of the sub display (right)shows [- - -], and the values corresponding to the current pressure values areautomatically displayed.Zero-clear functionbuttons are pressed for 1 secondor longer simultaneously, the main display shows [- - -], and the reset to zero.The display returns to measurement mode automatically.Key-lock functionTo set each of these functions, refer to the SMC website(URL ) for more detailed information, or contact SMC.button between 1 and 3 seconds inmeasurement mode. [SEt] is displayed on the main display. Whenthe button is released while in the [SEt] display, the current pressurevalue is displayed on the main display, [P_1] or [n_1] is displayed onthe sub display (left), and the set value is displayed on the subdisplay (right) (Flashing).or button to set the(The snap shot function can be used.)or button to set the(The snap shot function can be used.)or button, the delay time of the switch output can be selected.button for 2 seconds or longer to complete the OUT1 setting.∗:If the button is pressed for less than 2 seconds, the setting will be returned to P_1.In the window comparator mode, set P1L, the lower limit of the switch operation,and P1H, the upper limit of the switch operation, WH1 (hysteresis) and dt1 (delaytime) following the instructions given above.(When reversed output is selected, the sub display (left) shows [n1L] and [n1H].)Function selection modebutton between 3 and 5seconds, to display [F 0]. Select todisplay the function to be changed[F]. Press and hold the buttonfor 2 seconds or longer in functionselection mode to return tomeasurement mode.∗:Some products do not have all the functions. If no function is available or selected due toconfiguration of other functions, [- - -] is displayed on the sub display (right).Names of individual partsRefer to the product catalogue or SMC website (URL )for more information about panel cut-out and mounting hole dimensions.Pressure Setting3 Step Setting Mode(URL ) for more detailed information, or contact SMC.MaintenanceHow to reset the product after a power cut or forcible de-energizingThe setting of the product will be retained as it was before a power cut orde-energizing. The output condition is also basically recovered to that before apower cut or de-energizing, but may change depending on the operatingenvironment. Therefore, check the safety of the whole installation before operatingthe product. If the installation is using accurate control, wait until the product haswarmed up (approximately 10 to 15 minutes).Safety InstructionsBefore UseDigital Pressure SwitchZSE20(F)/ISE20Thank you for purchasing an SMC ZSE20(F)/ISE20 Series Digital PressureSwitch.Please read this manual carefully before operating the product and make sure youunderstand its capabilities and limitations. Please keep this manual handy forfuture reference.Safety InstructionsThese safety instructions are intended to prevent hazardous situations and/orequipment damage.These instructions indicate the level of potential hazard with the labels of"Caution", "Warning" or "Danger". They are all important notes for safety and mustbe followed in addition to International standards (ISO/IEC) and other safetyregulations.OperatorSwitch ONAt normal output Switch OFFSet valueP_1HysteresisH_1TimePressureOther parameter settingsDefault settingThe default setting is as follows.If no problem is caused by thissetting, keep these settings.。
SMC电磁阀结构组成
SMC电磁阀结构组成电磁阀（Electromagnetic valve）是一种利用电磁效应控制液体或气体流动的装置。
它由电磁阀芯组件、阀体组件、弹簧组件、密封件组件以及电磁铁组件等几个部分组成。
下面将详细介绍SMC电磁阀的结构组成。
1.电磁阀芯组件：电磁阀芯是电磁阀的核心部件，它由导磁片、阀座、阀体、弹簧等组成。
导磁片是铁磁材料，可受电磁线圈的激励磁化，在电磁力的作用下，与阀座接触或离开，实现控制介质通断的功能。
2.阀体组件：阀体是电磁阀的外壳，它的材料通常是铸铁、铸钢或不锈钢等。
阀体内部有阀座、阀座孔、阀门孔等构件，通过不同的控制方式，能实现不同介质的控制。
3.弹簧组件：弹簧是电磁阀的重要辅助部件，它的作用是将电磁阀芯定位或复位，保证电磁阀在工作或停止工作时能够准确地闭合或打开。
4.密封件组件：电磁阀的密封件组件主要包括密封圈、密封垫、密封圈等，用于防止介质的泄漏，保证电磁阀的正常工作。
5.电磁铁组件：电磁铁是电磁阀的动力源，通过电磁线圈产生磁场，激活导磁片，实现电磁阀的开启或关闭。
SMC电磁阀作为一种常用的气动元件，广泛应用于各个行业的自动化系统中。
它的优点是结构简单，体积小，重量轻，响应快，寿命长，可靠性高，运行稳定等。
根据需要，SMC电磁阀还可以具备电磁启动、防爆、长寿命等特殊功能。
以上是SMC电磁阀的结构组成，它们共同协作，确保电磁阀的正常工作。
在实际应用中，还需要合理选择电磁阀的型号、规格和安装位置，以满足不同的控制需求。
电磁阀的优化设计和使用条件的合理控制都能够有效提高电磁阀的工作效率，延长其使用寿命。
中文四版-SMC样本
2.5, 4
CAT.C06-02A
6, 10, 15
CAT.C06-02A
6, 10, 16
CAT.C04-01A
错误内容 产品规格变更
改正日期 06年8月
型号表示错误，易造成选型错误 06年8月
螺纹表示错误，易造成选型错误 06年8月
注解错误，易造成选型错误
07年11月
产品尺寸错误，易造成选型错误 07年8月
内容更新
07年11月
内容更新
07年11月
产品尺寸错误，易造成选型错误 磁性开关变更 词汇更正、录入错误
CAT.ES20-152B CAT.ES20-177A CAT.E256A CAT.ES20-179B CAT.E216B CAT.ES20-95B CAT.ES20-157B P-1991-6 CAT.ES20-160A CAT.E204A CAT.ES20-159A CAT.ES20-159A CAT.ES20-159A CAT.ES20-147A
9
f
B1
h+
□C
ZZ + + 行程
□B
A KF N H
S + 行程 ZZ + 行程
N M
(mm)
缸径 行程范围 (mm)
A AL □B B1 □C D E F G H1
J
(mm) 无防护套 带防护套
无防护套
带防护套
K KA M MM N P S
H ZZ e f h
SMC气动阀说明书
3 p o r t d i r e c t a c t i n g v a l v e1063M3PA*M3PB*Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 C. 10643 p o r t d i r e c t a c t i n g v a l v e1065500 mm 1000 mm 2000 mm 3000 mmSeries variation3PA/3PB SeriesLead wire (11/0.16)1066Electric connection circuit diagram3PA/3PB Series3 p o r t d i r e c t a c t i n g v a l v e1067Pneumatic componentsSafety precautionsAlways read this section before starting use.Refer to Intro 63 for valve general precautions.3 port direct acting valve pneumatic valve 3PA/3PB SeriesThe application differs from the solenoid valve for maintaining the vacuum. When using a pad, set a filter between the pad and valve so that foreign matter does not enter.Do not use this as a solenoid valve for emergency shut down.If left pressurized for a long time, the starting response could be delayed.When using with a vacuum, select direct current (DC) specifications.Install a vacuum filter on the suction port.CAUTIONEnergizing for a long time could impair solenoid valve performance.Similar caution is required in the following use.· During intermittent energizing, it takes longer than non-energizing.· During intermittent energizing, one energizing session exceeds 30 min.Consider heat dissipating measures when installing.Consult with CKD when using this device in a continuous energizing state.During Use & MaintenanceCAUTIONThe surge suppressor enclosed with the solenoid valve is to protect the output contact for that solenoid valve's drive. There is no significant protection for the other peripheral devices, and devices could be damaged or malfunction by the surge. Surge generated by other devices could be absorbed and cause damage such as burning. Care must be taken for points below.(1) The surge suppressor functions to limit a solenoid valve surge voltage, which can reach several hundred V, to a low voltage level that the output contact can withstand. Depending on the output circuit used, this may be insufficient and could result in damage or malfunction. Check whether the surge suppressor can be used by the surge voltage limit of the solenoid valve in use, the output device's withstand pressure and circuit structure, and by the degree of return delay time.If necessary, provide other surge measures. The inverse voltage surge generated when OFF can be suppressed to the following levels.(2) When using the NPN type output unit, the voltage given in the left table and a surge voltage equivalent to the power voltage could be applied on the output transistor. Increase the contact protection circuits in this case.(3) If another device or solenoid valve is connected in parallel to the solenoid valve, the inverse voltage surge generated when the valve is OFF would apply to those devices. Even when using the solenoid valve with surge suppressor for 24 VDC, the surge voltage may reach minus several ten V depending on the model. This inverse polarity voltage could damage or cause the other devices connected in parallel to malfunction. Avoid parallel connection of devices susceptible to reversing polarity voltages, e.g., LED indicators.When driving several solenoid valves in parallel, the surge from other solenoid valves could enter the surge suppressor of one solenoid valve with a surge suppressor. Depending on the current value, that surge suppressor could burn.When driving several solenoid valves with surge suppressors in parallel, surge current could concentrate at the surge suppressor with the lowest limit voltage and cause similar burning. Even if the solenoid valve type is the same, the surge suppressor's limit voltage can be inconsistent, and in the worst case, could result in burning. Avoid driving several solenoid valves in parallel.(4) The surge suppressor incorporated in the solenoid valve often short-circuits if damaged by overvoltage or overcurrent from a source other than the solenoid valve. If the surge suppressor fails, if a large current flows when output is on, the output circuit or solenoid valve could be damaged or ignite. Do not keep power on in a faulty state.Provide an overcurrent protection circuit on the power or drive circuit or use a power supply with overcurrent protection so that alarge current does not flow continuously.(Example of output transistor protective circuit installation 1)(Example of output transistor protective circuit installation 2)Programmable controller sideSolenoid valve sideProgrammable controller sideSolenoid valve side1068D i s c r e t e 3 p o r t d i r e c t a c t i n g v a l v e10693PA/3PB SeriesDiscrete valveHow to order discrete valve10703PA SeriesDiscrete valve: Body portingInternal structure and parts list 2-position single solenoid 3PA1103PA210Repair parts listMain parts list Operational principle3P Series is a pressure balance poppet valve which is not effected by working pressure. This valve maintains large flow rale but low wattage consumption.Port can be pressurized from either 1, 2 or 3 port.The diameters of valve seat and packing seal of stem assembly are same. Since pressure differentials of each port are stabilized by through hole of stem assembly, pressure is well balanced during ON and OFF.When de-energizedThe stem assembly is pushed toward port 1 side by the plunger spring force transmitted by the plunger.Valve seat and packing seal of stem assembly close port 1, while open port 2 and 3.*Port No. 1, 2, 3 indicates; Port 1: P, NC Port 2: A, COM Port 3: R, NO23131*3: Precautions apply when assembling the coil assembly into thevalve. Contact CKD for information.D i s c r e t e 3 p o r t d i r e c t a c t i n g v a l v e10713PB SeriesDiscrete valve: Sub-plate portingInternal structure and parts list2-position single solenoid3PB1103PB210When energizedWhen energizing the coil, the plunger is absorbed toward the coil side, while the stem assembly is moved by the stem spring force. This opens port 1 and 2, but closes port 3.*Port No. 1, 2, 3 indicates; Port 1: P, NC Port 2: A, COM Port 3: R, NO23 1313PA110-M53PA1/3PA2 Series2-position single solenoid: Grommet lead wire Mounting plate: (P) 3PA210-062-position single solenoid: Grommet lead wire Mounting plate: (P)1072D i s c r e t e 3 p o r t d i r e c t a c t i n g v a l v e1073Discrete valve: Body portingDimensionsø4, ø6 push-in joint: (GS4, GS6)3PA1C-connector: (C, C1, C2, C3) D-connector: (D, D1, D2, D3) Locking manual override: (M1)3PA1/3PA2 SeriesTerminal box: (B)Terminal box: (B, L, LS)Terminal box with indicator light: (L, L2, LS)C-connector: (C, C1, C2, C3)D-connector: (D, D1, D2, D3)Locking manual override: (M1)ø4, ø6 push-in joint: (GS6, GS8)3PA2(ø6 push-in joint)10743PB110-063PB1/3PB2 Series2-position single solenoid: Grommet lead wire3PB210-06 082-position single solenoid: Grommet lead wireD i s c r e t e 3 p o r t d i r e c t a c t i n g v a l v e1075Discrete valve: Sub-plate portingDimensionsTerminal box: (B)3PB13PB2C-connector: (C, C1, C2, C3) D-connector: (D, D1, D2, D3)Locking manual override: (M1)C-connector: (C, C1, C2, C3)D-connector: (D, D1, D2, D3)Locking manual override: (M1)3PB1/3PB2 SeriesTerminal box with indicator light: (L, L2, LS)Terminal box: (B, L, LS)Note 2: Response time is the value when ON for supply pressure 0.5 MPa, pre-lubricated. The value varies depending on pressure and quality of lubricant.1076I n d i v i d u a l w i r i n g m a n i f o l d 3 p o r t d i r e c t a c t i n g v a l v e1077M3PA/M3PB SeriesIndividual wiring manifold* Gasket, set screw attachedM3PA/M3PB SeriesIndividual wiring manifoldHow to order individual wiring manifoldHow to order masking plate kit* Gasket and set screw attached5S1MP 2Indicate the quantity.How to order mixed manifold models(1) Indicate the quantity for each function (solenoid position) at the end of the model.Functions and symbols are indicated below.(2) Indicate the function (solenoid position) and layout position in the remarks field.Example: 2-position single solenoid –› S1Example: S1 = 1 to 5 (1 to 5th station is 2-position single solenoid.)2-position single solenoid (S1): 5 piece (1 to 5th station)Masking plate: 2 piece (6, 7th station)M3PB180-06-M1-B-7-3<Example of model number>For 7 stationSolenoid position symbol = , th station (facing the piping port, the left side is the 1st station.)LayoutSymbolS1 = 1 to 5 MP = 6 to 75S1MP2How to order mix manifold5S1MP2S1 = 1 to 5, MP = 6 to 71079M3PA/M3PB SeriesIndividual wiring manifoldI n d i v i d u a l w i r i n g m a n i f o l d 3 p o r t d i r e c t a c t i n g v a l v e1080M3PA180-M5M3PA1/M3PA2 SeriesPort 2 - Individual piping Port 1, 3 - Common porting: Grommet lead wireM3PA280-06Port 2 - Individual piping Port 1, 3 - Common porting: Grommet lead wire3PA119-M5-[Option]-[Voltage]Model no. of discrete solenoid valve for manifold 3PA219-06-[Option]-[Voltage]Individual wiring manifold: Body porting DimensionsM3PA1C-connector: (C, C1, C2, C3) D-connector: (D, D1, D2, D3) Locking manual override: (M1)M3PA1/M3PA2 SeriesTerminal box: (B)Terminal box with indicator light: (L, L2, LS)ø4, ø6 push-in joint: (GS4, GS6)C-connector: (C, C1, C2, C3) D-connector: (D, D1, D2, D3) Locking manual override: (M1)ø6, ø8 push-in joint: (GS6, GS8) Terminal box: (B, L, LS)M3PA2Individualwiringmanifold3portdirectactingvalve10811082M3PB180-06M3PB1 SeriesPort 2 - Individual piping Port 1, 3 - Common porting: Grommet lead wireM3PB180-06APort 2, 3 - Individual piping Port 1 - Common porting: Grommet lead wireModel no. of discrete solenoid valve for manifold 3PB119-00-[Option]-[Voltage]1083Individual wiring manifold: Sub-plate portingDimensionsM3PB1C-connector: (C, C1, C2, C3)D-connector: (D, D1, D2, D3)Locking manual override: (M1)M3PB1 SeriesTerminal box: (B)Terminal box with indicator light: (L, L2, LS)M3PB180-06BPort 1, 2 - Individual piping Port 3 - Common porting: Grommet lead wireø4, ø6 push-in joint: (GS4, GS6)I n d i v i d u a l w i r i n g m a n i f o l d 3 p o r t d i r e c t a c t i n g v a l v e1084M3PB280-06M3PB2 SeriesPort 2 - Individual piping Port 1, 3 - Common porting: Grommet lead wireM3PB280-06YPort 2 - Back porting Port 1, 3 - Common portingM3PB280-06APort 2, 3 - Individual piping Port 1 - Common porting: Grommet lead wireModel no. of discrete solenoid valve for manifold 3PB219-00-[Option]-[Voltage]Model no. of discrete solenoid valve for manifold 3PB219-00-[Option]-[Voltage]JIS symbolJIS symbol1085Individual wiring manifold: Sub-plate portingDimensionsM3PB2C-connector: (C, C1, C2, C3)D-connector: (D, D1, D2, D3)Locking manual override: (M1)M3PB2 SeriesTerminal box: (B, L, LS)M3PB280-06BPort 1, 2 - Individual piping Port 3 - Common porting: Grommet lead wireø6, ø8 push-in joint: (GS6, GS8)I n d i v i d u a l w i r i n g m a n i f o l d 3 p o r t d i r e c t a c t i n g v a l v e10862°3PA/3PB SeriesTechnical data (1) How to wire terminal box wiring and connectorHow to wire terminal box wiring and connectorRefer to the following drawing, and wire the terminal boxfollowing steps 1) to 3) below.1) Pass the cap (4), washer (5), and gasket (6) in order through the cabtire cable (7), and insert in case (2).2) When using a crimp terminal, treat the cabtire cable (7) at an appropriate length as shown in the figure, and crimp the crimp terminal (8) onto the end.3) Remove screw (10) from terminal gland (3), and pass through crimp terminal (8). (When using the Y type terminal, loosen and sandwich the terminal.) Then, tighten screw (10) again. Note: Tighten at torque of 0.5 N·m ±15%.Remarks: Bare wires can be wired. In this case, loosen screw (10), andinsert leads into the fitting, then tighten again.The cord’s direction can be changed by pulling the gland out of the case, rotating it 180°, then pressing it into the case again.The following crimp terminals (8) can be used.Use equivalent products when using other brands.3 p o r t d i r e c t a c t i n g v a l v e1087O.D. ø4 to 6.5Tighten the lead wire with the set screw.A small flat-tipped screwdriver is required.23( )Note: Do not tighten together with thesurge suppressor.Insert the gasket andterminal block into the voltage terminal and grounding terminal.Technical data (1) How to wire terminal box wiring and connector3PA/3PB SeriesPower consumption 1.8 W becomes 2.0 W when the 24 VDC light is enclosed.。
SMC系列产品使用说明书
7．1确认电源电压与电动机使用电压相同。
7．2对于无现场按钮灯盒的SMC－04、03、00、0、1、2产品，接线前应取下G·L·SW箱罩，（有开度窗的箱罩）这时可见到G·L·SW上部和其前部端子板。进线孔位于主箱体下部、上部或侧面。
对于装有现场按钮灯盒或整体型SMC－04、03、00、0、1、2产品，接线前不仅应取下G·L·SW箱罩，还应取下T·SW箱盖（在主箱体另一测）。因为这时接线端子板多设在T·SW箱体内，T·SW箱体上亦有进线孔。
拆卸时应先将电动装置吊装可靠再松开紧固螺栓，而后将其自阀门上取下。
5．4 SMC/HBC、SMC/JA部分回转产品的安装与拆卸方法是：
先将花键接头装到阀杆上，使电动装置二级减速机构的驱动轴位置与阀门所处位置相同。
（此时阀门在某一终端位置最理想）起吊电动装置，使其驱动轴与阀杆上的花键接头对准，同时应对准阀门与电动装置的连接螺孔。使驱动轴与花键接头配合装入，而后用螺栓将阀门与电动装置紧固可靠。
拆卸时应先将电动装置吊装可靠，松开紧固螺栓将其自阀门上取下。
（注意：无论是多回转或部分回转电动装置，其吊环只允许用于起吊电动装置自身，不得连同阀门一起进行吊装）。
5．5安装前应清洗阀杆并涂润滑脂。明杆多回转阀门应确认其阀杆伸出量要小于阀杆罩高度。
5．6安装时应注意电动阀门在管道上的位置，以保证电动装置有合理的调试、维修空间。
a、型号：该产品型号。
b、最大控制转矩：该产品出厂前调定的最大转矩值（N.m）。
c、输出转速：该产品在单位时间内输出轴的转圈数（r/min）。
d、最大转圈数：该产品位置指示机构指针从0～100％走满刻度情况下输出轴总的转圈数。
e、编号：该产品总序号或本年度产品的序号。
SMC气缸型号以及附件连接形式
※导线长度表示记号0.5m ……………无记号 （例）M9NW 1m …………… M （例）M9NWM 3m …………… L （例）M9NWL 5m …………… Z （例）M9NWZ 无…………… N （例）H7CN ※带"O"的无触点磁性开关按订货生产。
※除本表型号外，还可能安装的磁性开关参见P.16。
※导线前置插头的磁性开关参见《Best Pneumatics 》第二册P.1328、1392。
※D-A9□（V ）, M9□（V ）, M9□W （V ）,M9□A （V ）型磁性开关一同包装出厂（未组装）。
（但磁性开关安装件组装出厂。
）※※※防水性强型磁性开关，可以安装在上述产品上，但是不能由此保证上述产品的防水性。
在防水坏境下，推荐使用具有防水性的产品。
其中，关于ø20、ø25的防水性产品，请联系本公司型号表示方法N N 带磁性开关气缸行程（※※安装件和气缸一同包装出厂。
※安装件F, G, L, D 对应的气缸为Z ：基本型（无耳轴安装用螺孔）。
※杆端螺纹形状为内螺纹时，无连接件。
※杆端连接件和气缸一同包装出厂。
※单肘节接头中不包含销轴。
RoHS1气缸/标准型 ：单杆双作用ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100CG1 系列乐清市顺力气动有限公司ｈｔｔｐ：／／ｗｗｗ．ｓｌｑｄ．ｃｎ乐※对于ø80, ø100，没有基本型（无耳轴安装用螺孔）、杆侧耳轴型、无杆侧耳轴型。
对于ø20~ø63的脚座型、法兰型、耳环型，没有耳轴安装用内螺纹。
使用时，请不要超过允许动能。
详细情况请参考P.4。
缸径（mm ）动作方式给油使用流体耐压试验压力最高使用压力最低使用压力环境温度及使用流体温度使用活塞速度行程长度允差缓冲安装形式※单杆双作用不要（不给油）空气1.5MPa1.0MPa 0.05MPa 无磁性开关：−10℃~70℃（未冻结时）带磁性开关：−10℃~60℃~200st mm （ø20）~300st mm （ø25~ø100）垫缓冲0.28J 0.11J0.41J 0.18J0.66J 0.29J1.20J 0.52J2.00J 0.91J3.40J 1.54J5.90J 2.71J9.90J 4.54J ＋1.40＋1.40基本型、基本型（无耳轴安装用螺孔）、轴向脚座型、杆侧法兰型、无杆侧法兰型、杆侧耳轴型、无杆侧耳轴型、耳环型（通口位置作90°变更时使用）※ø80, ø100没有杆侧耳轴型和无杆侧耳轴型。
SMC空气组合元件
AC
构成元件 组合 系列 连接口径 空气过滤器 AF
减压阀 AR
油雾器 AL
过滤减压阀 AW
油雾分离器 AFM
AF+AR+AL
AC10 AC20 AC25 AC30 AC40 AC40-06 AC50 AC55 AC60
1
M5x0.8
1 8·1Hale Waihona Puke 4 1 4·3 8 1 4 ·3 8
AF10 AF20 AF30 AF30 AF40 AF40-06 AF50 AF60 AF60
适合型号 AC10 □ ～ 60 □ AC10 □ ～ 60 □ AC10 □ ～ 60 □ AC10 □ ～ 60 □ AC25 □ ～ 60 □ AC20 □ AC25 □ ～ 60 □ AC10 □ ～ 60 □ AC10 □ ～ 60 □ AC25 □ ～ 60 □ AC10 □ ～ 60 □
AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR50 AR60
AL10 AL20 AL30 AL30 AL40 AL40-06 AL50 AL60 AL60 AL10 AL20 AL30 AW10 AW20 AW30 AW40 AW40-06
/ /
/ /
/
/
/
4·3 8·1 2 3 4 3
～
可 选 项
D E G
a
-1 -2 -3 -6
准 标 准 规 带杯保护罩 格
-8 -C -J -N -R
排水活门上带倒钩接头 -W 用ø6/ø4尼龙管 标牌、杯注意指示及 -Z 压力表的单位记为: PSI, ºF
配件规格
连接口径 功能 不拆配管也能装拆元件 P3.60
SMC气缸第一册(执行元件)E
e
f
h
59 66 66 80 81
ZZ
1/4行程 223 1/4行程 245 1/4行程 262 1/4行程 315 1/4行程 344
40 50 63 80 100
153 37.5 168 44 182 52.5 218 59.5 246 69.5
40 50 63 80 100
20~500 20~600 20~600 20~750 20~750
通口螺纹种类
125
140 无气压时弹簧锁紧 0.25MPa 或以上 0.2MPa 或以下 0.25~0.7MPa 双向
160
磁性开关个数 无记号 S n 2个 1个 n个
无记号 TN
Rc NPT
行程 / 磁性开关型号表
注1)
定位精度
锁紧形式 弹簧锁 100 ± 0.5 活塞速度(mm/s) 300 ± 1.0
(但未冻结)
50～1000 mm/s 气缓冲
+1.4 ~250 +1 0 ,251~1000 0 ,1001~1500 +1.8 0
停止精度(不含控制系统的影响)
使用活塞速度(mm/s) 100 300 500 1000 停止精度(mm) ±0.3 ±0.6 ±1 ±2 条件: 水平安装, 0.5MPa，电磁阀安装在锁通口 上, 允许负载的上限。
160
型号表示方法 基本型:
注)
*不能使用磁性开关。
CNS
基本型
B
125 160
10Hale Waihona Puke 500行程D D
双向锁
带磁性开关 0℃~60℃,不带磁性开关 0℃~70℃ 50~500mm/s 气缓冲
~ 250: 0 , 251 ~ 1000: 0 , 1001 ~ 1500: 0 , 1501 ~ 1600: 0
轿车SMC部件应用列表
车型/文字描述：
Overall
福特雷鸟Thounderbird 全复合材料车壳，SMC构件有：前围，前翼子板，发动机罩，后箱盖，活动车 顶等，生产成本下降50%，全貌靓丽
Installation position
SMC Part
计和行人安全保护方面也有其独到的好处 （Plastic Omnium）生产
Overall
Installation position
SMC Part
宁波华缘SMC/BMC-俞碧波
车型/文字描述： 凯迪拉克－XLR其外饰面板、发动机罩、门板、车顶和后备箱盖等活动部分采用了高强度复合材
料（SMC复合材料）
车型/文字描述：
Overall
1994福特Mustang采用了14kg的SMC发动机罩
Installation position
SMC Part
车型/文字描述：
Overall
林肯lincoln Mark VIII发动机罩
Installation position
SMC Part
宁波华缘SMC/BMC-俞碧波
Installation position
SMC Part
Espace II ( 1991-1997 )
Espace III ( 1997-2003 )
车型/文字描述：
Overall
2005 丰田Tacomas系列的标准配置包括比钢轻10%但更硬，更耐用的新型SMC材料制的板和壁
Installation position
车型/文字描述：
Overall
通用悍马Hummer h2型SUV引擎盖和前挡泥板由美国Meridian汽车公司用SMC制造
SMC电磁阀样本
SMC电磁阀样本SMC电磁阀样本通常包括以下几个部分：主体、线圈、阀盖和活塞。
主体是电磁阀的主体结构，通常由铝合金或不锈钢材料制成，具有较好的耐腐蚀性和耐压性能。
线圈是电磁阀的核心部件，其内部通过电流产生电磁场，从而控制阀门的开关。
阀盖是电磁阀的顶部结构，通常由塑料或不锈钢材料制成，具有良好的密封性和抗压性能。
活塞则是电磁阀的运动部件，其根据电磁场的作用实现阀门的开关。
SMC电磁阀的工作原理主要是通过电流产生的磁场，控制阀门的开关。
当电流通过线圈时，线圈内部会产生电磁场，使得阀门的活塞受到磁力的作用而移动。
当线圈通电时，活塞会被吸引到阀盖的一端，从而使阀门关闭。
反之，当线圈断电时，活塞会被弹簧的作用推向另一端，从而使阀门打开。
SMC电磁阀在工业自动化领域有着广泛的应用。
首先，它常被用于控制流体的流量。
通过调节线圈的通电与断电，可以实现对流体流速和压力的调节，从而满足不同工艺的要求。
其次，它也常被用于控制气体或液体的方向。
通过控制阀门的开关，可以实现液体或气体的正向或反向流动，从而实现系统的控制。
最后，SMC电磁阀还可用于控制气体或液体的混合比例。
通过组合多个阀门，在不同的时间和比例下控制液体或气体的流入和流出，可以实现复杂的混合比例控制。
综上所述，SMC电磁阀是一种常见的控制元件，广泛应用于自动化设备和工业生产线中。
其结构简单、工作可靠，能够满足不同工艺条件下的流体控制需求。
在不同的应用领域中，SMC电磁阀都发挥着重要的作用，为工业自动化提供了强大的支持。
SMC样本
导线引出方式
DC24V、 12V、 6V、 5V、 3V／AC100V、 110V、 200V、 220V 直接出线式 L形插座式 M形插座式
G: 导线 长300mm L: 带导线 (长300mm) M: 带导线 MN: 不带导线 (长300mm)
++-
DC24V、 12V AC100V、 110V、 200V、 220V
R
pvPMM M KRMM M KTMM M KVMMM pvPMMM RMMM TMMM
!"
海外规格适合型号详见 SMC原来样本有关页。
!
型号表示方法
SY 5 1 20
系列
3 5 7 9 SY3000 SY5000 SY7000 SY9000
5
L
01
托架 A ・ B通口接管口径
螺纹配管 记号 M5 01 02 02 03 接管口径 M5×0.8
1 8 18
型号／SY9000系列
阀的 型号 接管口径 流量特性 质量g 1→4/2(P→A/B) 4/2→5/3(A/B→EA/EB) L形、 W形 1、 5、 3 4、 2 DIN形 直接 3 3 (P、EA、EB) (A、 B) C[dm / b Cv C[dm / b Cv 出线式 M形 插座式 M8 插座式 接头 (s ・ bar)] (s ・ bar)] 单电控 241 244 265 269 2位 7.0 0.33 1.7 7.6 0.35 2.0 双电控 260 266 308 316 机能 中封式 3位 中泄式 中压式 单电控 2位 双电控 SY9□20 -□-03 中封式 3位 中泄式 中压式 单电控 2位 双电控 SY9□20 -□-C8 中封式
14 14
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Product Part Number: MGPL16-20
Part Number
Description:
CYL GUIDE
Product Line: A
Product Line
Description:
ACTUATOR
Family Code:481
Family Description: MGP COMPACT GUIDE CYLINDER
Class Code: GB Part Code: 1 Reference Code: J
Product Part Number:
MGPM20-30
Part Number
Description:
CYL GUIDE
Product Line: A
Product Line
Description:
ACTUATOR
Family Code:481
Family Description: MGP COMPACT GUIDE CYLINDER
Class Code: HM Part Code: 1 Reference Code: J
Product Part Number: MGPM20-75
Part Number Description:CYL COMPACT GUIDE SLIDE BRG
Product Line: A
Product Line
Description:
ACTUATOR Family Code:481
Family Description: MGP COMPACT GUIDE CYLINDER
Class Code: HM Part Code: 1 Reference Code: J
Product
MGPL20-20
Part
Number:
MGPL20-20
Part Number
CYL GUIDE
Description:
Product Line: A
Product Line
ACTUATOR
Description:
Family Code:481
Family Description: MGP COMPACT GUIDE CYLINDER
Class Code: HB
Part Code: 1
Reference Code: J
Product Part Number: MXH16-10
Part Number Description:CYL COMPACT SLIDE TABLE
Product Line: A
Product Line
Description:
ACTUATOR Family Code:495
Family Description: MXH HIGH RIGIDITY GUIDE CYL
Class Code: GE Part Code: 1
Reference Code: J
MXH16-5
Part Number Description:CYL COMPACT SLIDE TABLE
Product Line: A
Product Line
Description:
ACTUATOR Family Code:495
Family Description: MXH HIGH RIGIDITY GUIDE CYL
Class Code: GE Part Code: 1 Reference Code: J
ECDQ2WB50-20D
Part Number Description:CYL COMPACT DBL ROD (EURO) Product Line: A
Product Line Description:ACTUATOR
Family Code:515
Family Description: CQ2 COMPACT CYLINDER
Class Code: N7
Part Code: 1
Reference Code: E
CRB1BW50-180S-XF
Part Number Description:
ACTUATOR
ROTARY
Product Line: A
Product Line
Description:
ACTUATOR Family Code:534 Family Description:
CRB1BW
ROTARY
ACTUATOR Class Code: NW
Part Code: 1 Reference Code: J
MGPM32-10
Part Number
CYL COMPACT GUIDE Description:
Product Line: A
Product Line
ACTUATOR
Description:
Family Code:481
Family Description: MGP COMPACT GUIDE CYLINDER
Class Code: LM
Part Code: 1
Reference Code: J。