Li-ionPolymerBatterySpecification锂离子聚合物电池规格书
聚合物锂离子电池产品规格书说明书
Product Specification for Li-ion Polymer Battery 聚合物锂离子电池产品规格书Model电芯型号: 702427(PCM)惠州基安比新能源有限公司HUIZHOU MARKYN NEW ENERGY CO.,LTD.电话: ************传真: ************TEL: ************ FAX : ************SPECIFICATION AMENDMENT RECORDS规格书变更记录1. Scope适用范围：This document describes the Product Specification of the Li-Polymer Rechargeable Battery supplied by Huizhou Markyn New Energy Co., LTD.本规格书描述了惠州基安比新能源有限公司的可充电锂离子聚合物电池的产品性能指标。
2. Description 说明2.1 Description: Li-Polymer Battery类型：锂离子聚合物电池2.2 Model: 702427型号：7024273. Specification产品规格4. Battery Cell Performance Criteria 电芯性能标准4.1 Standard testing environment标准测试环境Unless specifically stated otherwise, tests must be done within one month of delivery and the number of charging-recharging cycles is fewer than 5. The following is test conditions:Test conditions:Ambient Temperature：23ºC ± 2ºCAmbient Humidity：65±20%RH除非另有说明，测试应在电池出货的1个月内进行，且充放电循环的次数少于5次。
锂离子聚合物电池规格书说明书
页码：1/15602030PL300mAhSpecification of Li-ion Rechargeable Battery锂离子电池规格书Model：602030PL300mAh/3.7VCustomer Confirmation Customer Name: Customer No.: Comment:Customer Approval:Prepared by Checked by Approved by 肖志军602030PL300mAh页码：2/15兴永恒（深圳）电子有限公司深圳宝安区沙井后亭E-mail：****************Website：TEL：86-0755-********FAX：86-0755-********AMENDMENT RECORDSREVISION DATE ORIGINATOR REASON FOR REVISION A001 2016-6-20602030PL300mAh页码：3/15Content目录1. Scope范围 (4)2. Reference Standard 参考标准 (4)3. Picture of battery电池图 (4)3.1 Picture of single cell 单体电芯图 (4)3.2 Picture of assembled battery 组合电池图 (6)4. Basic of performance 基本性能 (7)4.1 Single cell parameters 单体电芯参数 (7)4.2 Assembled cell parameters包装后电芯组参数 (8)5. Electrical Characteristics电性能 (8)5.1 Normal Test Conditions标准测试条件 (8)5.2 Electrochemical Characteristics电化学性能 (8)5.3 Environment Characteristics环境适应性能 (9)5.4 Safety Characteristics 安全性能 (10)6. PCM Specification PCM 规格 (11)6.1 Electrical Characteristics电性能 (11)6.2 Circuit Diagram 电路图 (11)6.3 Circuit topology Drawing and PIN Explanation电路布线图和焊盘说明 (12)6.4 PCM BOM 保护板物料清单 (12)7. Storage and Shipment Requirement存储及运输要求 (13)8. Warning and Cautions 警告及注意事项 (13)9. Note 声明 (15)页码：4/15602030PL300mAh1. Scope范围This specification describes the performance, testing method, warning and caution of the lithium-ion rechargeable battery.The specification applies to polymer battery supplied by Shenzhen biyate energy co., ltd本标准描述了锂离子电池的性能、测试方法及注意事项。
13450电子烟规格书
5.3.2Max. Charge Current最大充电电流
1.0CmA=650mA
Full charge condition: Constant current 0.2CmA to 4.2V, Constant voltage 4.2V to 0.05C in all at 25±2℃.
Temperature
存储温度
less than 1 month小于1个月
-10~+45℃
Recommended storage
temperature:20℃，at the
transportation
运输时存储温度为20℃。
less than 6 months小于6个月
-10~+35℃
4Outline Dimensions and Appearance电池外形尺寸及外观
4.2Appearance外观
There shall be no such defect as scratch, flaw, crack, rust, leakage, which may adversely affect
Commercial value of battery.
电池外表面清洁，无电解液泄漏，无明显的划痕及机械损伤，无变形，无影响电池价值的其它外观缺陷。
…………………………………………………
4
2.1
Product产品种类
………………………………………………………………
4
2.2
Model Name产品型号
………………………………………………………………
4
3
Ratings主要技术参数
………………………………………………………………
401020规格书
Charge Ending Voltage 5
充电截止电压
4.20±0.03V
Discharge Ending Voltage
6
3.0V
放电截止电压
0℃ ～ 45℃ 0.5C constant current charge to 4.2V, then
Approved by
刘华贵
锂离子聚合物电池规格书
Specification of Li-ion Polymer Battery
401020PL50mAh
AMENDMENT RECORDS
编 号：YT--401020-50 版 本：A00 页 码：2/13
REVISION DATE
ORIGINATOR REASON FOR REVISION
7. Storage and Shipment Requirement 存储及运输要求................................................................................ 12
8. Warning and Cautions 警告及注意事项.....................................................................................................12
锂离子聚合物电池规格书
Specification of Li-ion Polymer Battery
401020PL50mAh
编 号：YT--401020-50 版 本：A00 页 码：6/13
4. Basic of performance 基本性能 4.1 Single cell parameters 单体电芯参数
Polymer 锂离子电池说明书.pdf_1718703523.3075805
Specification Approval Sheet Name：Polymer Lithium-Ion BatteryModel： CELLEVIA BATTERIES LP684063SPEC：3.7V/ 1900mAhNumber: 684063Specification Modification RecordsContent1.Scope:This specification describes the Product Specification of chargeable Polymer Lithium-IonBattery produced by Cellevia.Any copies are invalid without our company’s approval2.Model :3.Cell parameters Index:3.2 Parameters of batterythe temperature.4.Electronic Characteristics test and inspection:4.1 Standard testing environmentUnless special stated, tests should be done within one month of delivery and thecharging-recharging times is less than 5 times. The following is test conditions: Ambient Temperature： 25℃±0.5℃Ambient Humidity： 65 ±20%4.2 The requirement of measure instrument(1) The measure instrument is passed tested by qualified institute.(2) The accuracy of the size instrument is not more than 0.01mm.(3) The accuracy of multimeter is not less than 0.5%. while measure the voltage, theinternal resistance mustn’t less than 10KΩ.(4) The principal of the internal resistance is 1KHz LCR, the accuracy is 0.2%.(5) The internal resistance is changeable, it varies according to the temperature and thecharging mode. And it is relevant to the PTC and the length and the Capacity of the drawing line.(6) The current accuracy of the battery test system is more than ±0.1%,isobaricallyaccuracy is ±0.5%, timer accuracy is less than ±0.1%.(7) The accuracy of the temperature meter is less than ±0.5℃.4.3 Visual inspectionAny visual inspection defects will affect the electronic characteristics, such as cracks,leakage, and flaw, are not inexistence.Notes： The Max. voltage while charging is not more than 4.25V.The Max.protective voltage designed on PCB board should not more than4.3V.5. Storage and others5.1 Long Period StorageIf the cell has been stored for 3 month, it should be transfer to a dry and cool environment. Storage Voltage is between 3.6V and 3.9V and the storage conditions as Item 4.1.5.2Any matters that this specification does not cover should be conferred between theSpecification Approval sheet6.Drawing6.1 Assembly diagram(not in scale)Model ：LP68406341.0MAX30adhesive wire black AWG2660wire red (+)AWG26507040631900m A hE V I A B A T T E R I E S 3,7 V! Danger●Strictly prohibits heat or throw cell into fire.●Strictly prohibits throw and wet cell in liquid such as water, gasoline or drink etc.●Strictly prohibits use leave cell close to fire or inside of a car where temperature may be above60°C. Also do not charge / discharge in such conditions.●Strictly prohibits put batteries in your pockets or a bag together with metal objects such asnecklaces. Hairpins,coins, or screws. Do not store or transportation batteries with such objects.●Strictly prohibits short circuit the (+) and (-) terminals with other metals.●Do not place Cell in a device with the (+) and (-) in the wrong way around.●Strictly prohibits pierce Cell with a sharp object such as a needle.●Strictly prohibits disassemble or modify the cell.●Strictly prohibits welding a cell directly.●Do not use a Cell with serious scar or deformation.●Thoroughly read the user’s manual before use, inaccurate handling of lithium ion rechargeablecell may cause leakage, heat, smoke, an explosion, or fire, capacity decreasing.! Warning●Strictly prohibits put cell into a microwave oven, dryer, or high-pressure container.●Strictly prohibits use cell with dry cells and other primary batteries, or new and old battery orbatteries of a different package, type, or brand.●Stop charging the Cell if charging is not completed within the specified time.●Stop using the Cell if abnormal heat, odor, discoloration, deformation or abnormal condition isdetected during use, charge, or storage.●Keep away from fire immediately when leakage or foul odor is detected.●If liquid leaks onto your skin or clothes, wash well with fresh water immediately.●If liquid leaking from the Cell gets into your eyes, do not rub your eyes. Wash them well with cleanedible oil and go to see a doctor immediately.! Caution●Before using the Cell, be sure to read the user’s manual and cautions on handling thoroughly.●Charging with specific charger according to product specification. Charge with CC/CV method.Strictly prohibits revered charging. Connect cell reverse will not charge the cel. At the sametime, it will reduce the charge-discharge characteristics and safety characteristics, this will leadto product heat and leakage.●Store batteries out of reach of children so that they are not accidentally swallowed.●If younger children use the Cell, their guardians should explain the proper handling.●Before using the Cell, be sure to read the user’s manual and cautions on handling thoroughly.●Batteries have life cycles. If the time that the Cell powers equipment becomes much shorter thanusual, the Cell life is at an end. Replace the Cell with a new same one.●When not using Cell for an extended period, remove it from the equipment and store in aplace with low humidity and low temperature.●While the Cell pack is charged, used and stored, keep it away from objects or materials with staticelectric charges.●If the terminals of the Cell become dirty, wipe with a dry clothe before using the Cell.●Storage the cells in storage temperature range as the specifications, After full discharged, wesuggest that charging to 3.9~4.0V with no using for a long time.●Do not exceed these ranges of the following temperature ranges.Charge temperature range : 0 °C to 45 °C;Discharge temperature range : -20 °C to 60 °C.(When using equipment)Handling Precaution and GuidelineFor LIP (Lithium-Ion Polymer) Rechargeable BatteriesPrefaceThis document of ‘Handling Precautions and Guideline LIP Rechargeable Batteries’shall be applied to the battery cells manufactured by CELLEVIA.Note (1): The customer is requested to contact CELLEVIA in advance, if and when the customer needs other applications of operating conditions than those described in this document. Additional experimentation may be required to verify performance and safety under such condition.Note (2): CELLEVIA will take no responsibility for any accident when the cell is used under other condition.Note (3): CELLEVIA will inform, in a written form, the customer of improvement(s) regarding proper use and handling of the cell, if it is deemed necessary.1. Charging 1.1ChargingCurrent:Charging current should be less than maximum charge current specified in theSpecification Approval Sheet.1.2 Charging Voltage:Charging voltage should be less than the maximum nominal voltage 4.2V, andthe charging voltage upper limited is 4.30V(single pack).1.3 Charging Temperature:The cell should be charged within the range specified in this Specification ApprovalSheet.1.4 Notes:Since charging with constant current or constant voltage, reverse charging isprohibited. In case of the cell is connected improperly, the cell cannot be charged.Simultaneously, the reverse charging may cause damaging to the cell whichmay lead to degradation of cell performance and damage the cell safety, andcould cause heat generation or leakage.2. Discharging Current:The cell shall be discharged at less than the maximum discharge current specified in the Specification Approval Sheet. High discharging current may reduce the discharging capacity significantly or cause over-heat.3. Discharging TemperatureDischarging Temperature should be within the range specified in this Specification Approval Sheet.4.Over-DischargeOver-discharging will cause cell low-performance and function loss. The cell would be in a over-discharged state by its self-discharge characteristic. In order to prevent over-discharging, the cell shall be charged periodically to maintain between 3.6V and 3.9V.5. Protective Circuit Module5.1 The cell / battery pack shall be with a PCM that can protect cell / battery packproperly. PCM shall have functions of(1) Overcharging prevention(2) Over-discharging prevention(3) Over current prevention to maintain safety and prevent significant deteriorationof cell performance. The over current can occur by external short circuit.5.2 Overcharging ProtectionOvercharging prevention function shall stop charging if any cell of the battery packreaches 4.30V.5.3 Over-discharging protectionOver-discharging protection function shall monitor the voltage of every cell in the pack, and work to avoid further drop in the cell voltage of 2.75V or less.6. StorageCells should be stored in proper temperature specified in Specification ApprovalSheet.7. AppearanceIt shall be free from any defects such as remarkable scratches, breaks, cracks,discoloration, leakage or deformation .8. Notice△!8.1 Handling of cells:Avoid any short-circuit, it will caused the pole hot and lost electronic functions.Soft packing is very damaged by sharp edge parts such as needles and knives.Avoid cells touch with sharp edge part, when handling and storage.Beside the poles is the sealed edge. Don’t bend or fold dealing edge, for it is a sensitive part.Don’t open the folding edge on both sides of the cells.Don’t bend the tabs, for the tabs are not so stubborn.Avoid mechanical shock to the cells.Don’t put the cells into the heater, washing machine or high-voltage container.Don’t use the charger without any safety guarantee, and recommend you use specified charger.You should immediately stop charging, as cell is overheating, delivery any smell, changed color, distortion etc.Before Children use batteries, adults should explain the usage first.Before use batteries, please read the handling guideline carefully and fully understand.Away from the static-electronic field, while using, charging and storing cells.Don’t put the cells together with metal conductors such as chains, barrette, bolt into the pocket or stored them together.Don’t use metal conductor to shortcut the positive and negative poles.Don’t mis-assemble the positive pole with the negative one.8.2 Notice for Designing Battery Pack8.2.1 Package DesignBattery pack should have sufficient strength and battery should be protected from mechanical shock.No sharp edge components should be inside the pack containing the battery.The overcharge threshold voltage should not be exceed 4.30V (single pack)The over-discharge threshold voltage should not be lower than 2.75V (single pack)The PCM should have short protection built inside.8.3 Notice for Assembling Battery Pack8.3.2 Tab connectionUltrasonic welding or spot welding is recommended to connect battery with PCM or other parts.If apply manual solder method to connect tab with PCM, below notice is very important to ensure battery performance.8.3.2.1 The solder iron should be temperature controlled and ESDsafe.8.3.2.2 Soldering temperature should not exceed 350℃.8.3.2.3 Soldering time should not be longer than 3 seconds .8.3.2.4 Keep battery tab cold down before next time soldering.8.3.2.5 Directly heat cell body is strictly prohibited. Battery shouldbe damaged by heat above approx. 60℃.8.3.3 Cell fixingThe battery should be fixed to the battery pack by its large surface area.No sharp edge at the assembling position.No cell movement in the battery pack should be allowed.9.Others9.1 The disassembling may generate internal shout circuit in the cell, which may causegassing, firing, or other problem.9.2 Prohibition of dumping of cells into fireNever incinerate or dispose the cells in fire, for these may cause firing of the cells.9.3 The cells should never be soaked with liquids such as water, drinks or oil.9.4 Prohibit using the cells mixed with different manufactories. Prohibit using new cellsmixed with old ones.▲Special Notice: If the cell isn’t used for a long time, Please Keep the cells in half-charged state, which is keeping them unfully charged or incompletely discharged. Recharge the cells and use half of the power after 2-3months. Store the cells in cool and dry place. It will protect the cell from damage effectively and long-term.10. StatementIf our specifications material, product process or product control system has changed, the information will be transmitted to consumer by way of written with quality and reliability data.。
电池常用英文单词
电池常用英文单词Specification 规格书Dimension Drawing, Configuration Drawing 尺寸图,结构图Approval Sheet 承认书Data Sheet 电池参数表,也叫规格书;Bill of Materials BOM 原材料清单Nominal Voltage 标称电压Nominal Capacity 标称容量Minimum/Minimal Capacity 最低容量Standard Charge 标准充电Rapid/ Fast Charge 快速充电Maximum Charge Voltage 最大充电电压CC/CV: Constant Current/Constant Charge 恒流/恒压充电Maximum Continuous Discharge Current最大连续放电电流Final Charge Current, Cut-off Current充电截止电流Final Discharge Voltage Cut-off Voltage放电截止电压Initial Internal Resistance / internal impedance 内阻Service Life, Circle Life 循环寿命Charge/ Discharge/Circle Life Curve 充电/放电/循环寿命曲线Lithium ion Battery锂离子电池Lithium Metal Battery 锂金属电池Lithium Ion Cylindrical Battery 锂离子圆柱电池Lithium Ion Prismatic Battery 锂离子方形电池Lithium Ion Polymer Battery 锂离子聚合物电池Lithium Phosphate Battery 磷酸铁锂电池Chemistry System 化学体系LiCoO2钴酸锂LiCoMnNiO2 锂钴锰镍,即三元锂电池Ambient Temperature 环境温度Charge Temperature Range 充电温度范围Discharge Temperature Range 放电温度范围Open Circuit Voltage 开路电压Capacity Retention 容量保持Self-Discharge 自放电Safety Test 安全测试Over Charge 过充电Over Discharge 过放电Short Circuit 短路Heating Test 热冲击测试Impact Test 冲击测试Environmental Test 环境测试Drop Test 自由跌落测试Vibration Test 振动测试Test Report 测试报告Constant Humidity and Temperature Test 恒温恒湿测试Protection Circuit Module PCM or Battery Manager Systems BMS 保护电路或者电池管理系统IC 集成电流Mosfet场效应管Over Charge Protection Voltage过充电保护电压Over Charge Protection Delay 过充电保护延迟Over Charge release Voltage 过充电恢复电压Over Discharge Protection Voltage 过放电保护电压Over Discharge Protection Delay 过放电保护延迟Over Discharge Release Voltage 过放电恢复电压Over Current Protection 过电流保护Over Current Protection Delay过电流保护延迟Short Circuit protection 短路保护Consumption 自耗电State Of Charge Indication SOC Indication 剩余容量显示Balance Charge 平衡充电Temperature Detection 温度检测Communication Bus or SMbus 通讯总线Thermistor or Negative Temperature Coefficient NTC 热敏电阻Thermostat 温度开关Polymer Positive Temperature Coefficient PPTC 过流保护器Circuit Diagram电路原理图Component List 元器件清单Charging Characteristics 充电特性Discharge CharacteristicsWeight: 重量 Gross Weight G. WT毛重,Net Weight N. WT 净重Dimension 尺寸Model No., Size 型号Part NumberPurchase Order PO采购订单Manufacture Order MO 生产订单L/CLETTEROFCREDIT信用证T/T TELEGRAFIC TRANSFER 电汇D/P DOCUMENT AGAINST PAYMENT 远期付款交单D/A DOCUMENT AGAINST ACCEPTION 承兑交单30% In Advance,30% deposit预付30%订金70% of the balance due 70%的余款10% Discount 10%折扣FOB free on board 离岸价不含运费的价格CIF cost, insurance and freight 到岸价含运费和保险费C&F cost and freight 成本加运费价含运费不含保险费Certification 认证Warranty 保质期External Appearance 外观Handling Instructions 操作指示Cautions 注意事项Samples 样品Fatal Defects 致命缺陷Major defect 严重缺陷Minor defect 次要缺陷Random Inspection 抽样检查Inspection Report 检验报告Final Quality Control FQC, Outgoing Quality Control OQC 出货检验Input Process Quality Control IPOC 品质巡检Incoming Quality Control IQC 来料检查Sample inspectionFully inspection, Total InspectionACCEPTANCE QUALITY LIMIT AQL 允收水准Minimum Order Quantity MOQ 最低订单量Expected Time of Arrival 预计到港时间estimated time of departure 估计离港时间Lead time 交货周期。
导电聚合物在锂离子电池正极上的应用
导电聚合物在锂离子电池正极上的应用一、锂离子电池简介锂离子电池是一种充电电池，它主要依靠锂离子在正极和负极之间移动来工作。
在充放电过程中，Li+ 在两个电极之间往返嵌入和脱嵌：充电池时，Li+从正极脱嵌，经过电解质嵌入负极，负极处于富锂状态；放电时则相反。
一般采用含有锂元素的材料作为电极的电池，是现代高性能电池的代表。
【1】锂离子电池可依电解质及正负极材料有无高聚物，分为液态锂离子电池(Liquified Lithium-Ion Battery，简称为LIB)和聚合物锂离子电池(Polymer Lithium-Ion Battery，简称为PLB)。
但目前主流的，商用的聚合物锂离子电池并没有使用导电高聚物作为电极材料，而是利用了聚合物凝胶电解质，另外高分子材料在锂离子电池上的应用还有将电池正负极板分开的隔膜。
【2】二、聚合物锂离子电池聚合物锂离子电池可分为三类：（1）固体聚合物电解质锂离子电池。
电解质为聚合物与盐的混合物，这种电池在常温下的离子电导率低，适于高温使用。
（2）凝胶聚合物电解质锂离子电池。
即在固体聚合物电解质中加入增塑剂等添加剂，从而提高离子电导率，使电池可在常温下使用。
（3）聚合物正极材料的锂离子电池。
采用导电聚合物作为正极材料，其比能量是现有锂离子电池的3倍，是最新一代的锂离子电池。
【3】1、锂离子电池三类主要正极材料的比较（从左至右）：[4]与液态锂离子电池相比，聚合物锂离子电池不但安全性高，同时还具有可薄形化、任意面积化与任意形状化等优点。
不过，其低温放电性能可能还有提升的空间（比如apple devices在冬天有时无法启动），而且造价较贵。
2、锂离子电池在主流电子产品上的应用【5】iphone 4 Li-ion Polymer Batteryiphone 5s Li-ion Polymer Batteryipod touch 5 Li-ion Polymer Batteryipad air[注] Li-ion Polymer Batteryipad mini2[注] Li-ion Polymer Batteryipad mini Li-ion Polymer Batteryipad 4 Li-ion Polymer Battery[注]:ipad air和ipad mini2的拆解图显示电池为Li-ion Battery，但苹果官方材料为Li-ion Polymer Battery由此可见，聚合物锂离子电池在高端便携设备上应用很广。
401643-250mAh电芯规格书-中英文
规格书修订记录History of specification地址：******产业园第4 栋5&6 楼Add：****** Town, DongguanCity, Guangdong Province邮编: 5******000P.C.：5******000电话：0769-******525Tel.：0769-******525传真：0769-******525Fax.：0769-******525Contents1 Scope fan 范围 (4)2 Product and Model Name 产品种类及型号 (4)2.1 Product 产品种类..................... ... (4)2.2 Model Name 产品型号 (4)3 Ratings 主要技术参数................................. ...... ............ ... (4)4 Outline Dimensions and Appearance 外形尺寸及外观 (5)4.1 Outline Dimensions 外形尺寸 (5)4.2 Appearance 外观 (5)5 Performance 性能 (5)5.1 Standard Test Conditions 标准测试条件 (5)5.2 Measuring Instrument or Apparatus 测试设备 (5)5.3 Standard Charge 标准充电 (6)5.4 Rest Period 搁置时间 (6)5.5 Initial Performance Test 初始性能测试 (6)5.6 Electrical Performance 电性能… ……………………………………7.85.7 Mechanical Performance 机械性能 (9)5.8 Safety Performance 安全性能 (10)6 Handling Instructions 电池使用指南……………………………………………………11.127 Period of Warranty 保质期 (13)8 Delivery Condition 运输条件 (13)9 Note 备注 (13)Fig.1 Dimensional Drawing of 外形尺寸图 (14)4 Outline Dimensions and Appearance 电池外形尺寸及外观4.1 Outline Dimensions 外形尺寸See attached drawing for 电池外形尺寸参见“PL401643(Fig.1).外形尺寸图”。
(豪鹏)905974-3700mAh(2S1P)+PCM+线
Li-ion Polymer Battery Pack Specification锂离子聚合物电池组合规格书物料号: TBDPack Type CELL+PCM+Wire组合类型：电芯+PCM+线Cell Model电芯型号: 905974Capacity (mAh)容量(mAh): 3700Customer Code客户代码: TBDTotal Page档页数：11Registered 编制Checked审核Approved批准周志勇2013-9-4Customer Approve客户确认Dept. 部门 Signature签名Date日期QA Dept品质R&D Dept研发Approved批准Add：Chaoshun Industrial Zone, Renmin Road, Fumin, Guanlan, Baoan, Shenzhen, Guangdong, China 地址：中国，广东省深圳市宝安区观澜镇福民小区人民路超顺工业区Tel(电话): 86（0）755-28010758 Fax(传真): 86（0）755-29522241http://www.spring Content目录1. MODIFIED LIST (3)2 .Scope 适用范围 (4)3.Initial Dimension初始尺寸 (4)4.Specification 产品规格 (5)5 General Performance 常规性能 (6)6 Environment Performance 环境性能 (6)7 Safe Characteristic 安全性能 (7)8. Battery Protection 电池保护 (7)9.Warnings 警告 (9)10. Cautions 注意 (9)11. Handling of Cells 电池操作注意事项 (10)12.Period of Warranty 保质期 (11)13. Others 其它事项 (11)1. MODIFIED LIST修订履历Product Modified Record List产品变更履历表Revision版本Date日期Mark标记Modified content变更内容Approved by批准A0 2013-9-4/ NEW RELEASE /2 .Scope 适用范围This specification describes the basic performance, technical requirement, testing method ,warning and caution of the Li-ion Polymer rechargeable battery pack, the pack defined in this documentation is an assembly which include battery, PCM and wire, the specification only applies to Shenzhen SpringPower battery Co Ltd.本标准规定了锂聚合物可充电池的基本性能、技术要求、测试方法及注意事项，电池组合定义的是包括电芯，保护板和连接线的组合，本标准只适用于曙鹏科技（深圳）有限公司所生产的锂聚合物电池。
聚合物锂离子电池规格说明书
67XaG'_B 0.01 mm J 3.2.2 Voltmeter"O #
3.5 Initial Performance Test"9:A=# Table 2"K 2#
3.1 Standard Test Conditions"Y8=>?#
Test should be conducted with new batteries within one week after shipment from our factory and the cells shall not be cycled more than five times before the test. Unless otherwise specified, test and measurement shall be done under temperature of 20+5* and relative humidity of 45~85%. If it is
,-" 0.2C5A #[$ 8.4VE%[,,&'(_ )K 8.4V #`[$,(_ 0.02 C5AE [, !"# 6 _ JT 0*-45*[,,-* +,-.J 3.3.2 Standard Discharge"Y8],#
0.2C5A =100mA Cells shall be discharged at a constant current of 0.2 C5A to 6.0 volts @ 20º 5C ,-K 0.2 C5A #],$ 6.0V @ 20º 5C
聚合物锂电池
聚合物锂电池锂聚合物电池（Li-polymer，又称高分子锂电池）：它也是锂离子电池的一种,但是与液锂电池(Li-ion)相比具有能量密度高、更小型化、超薄化、轻量化，以及高安全性和低成本等多种明显优势，是一种新型电池。
在形状上，锂聚合物电池具有超薄化特征，可以配合各种产品的需要，制作成任何形状与容量的电池。
该类电池可以达到的最小厚度可达0.5mm。
它的标称电压与Li-ion一样也是3.6或3.7V,没有记忆效应。
分类根据锂离子电池所用电解质材料不同，锂离子电池可以分为液态锂离子电池(lithium ion battery, 简称为LIB)和聚合物锂离子电池(polymer lithium ion battery, 简称为LIP)两大类。
聚合物锂离子电池所用的正负极材料与液态锂离子都是相同的，电池的工作原理也基本一致。
它们的主要区别在于电解质的不同, 锂离子电池使用的是液体电解质, 而聚合物锂离子电池则以固体聚合物电解质来代替, 这种聚合物可以是“干态”的,也可以是“胶态”的,目前大部分采用聚合物胶体电解质。
聚合物锂离子电池可分为三类：（1）固体聚合物电解质锂离子电池。
电解质为聚合物与盐的混合物，这种电池在常温下的离子电导率低，适于高温使用。
（2）凝胶聚合物电解质锂离子电池。
即在固体聚合物电解质中加入增塑剂等添加剂，从而提高离子电导率，使电池可在常温下使用。
（3）聚合物正极材料的锂离子电池。
采用导电聚合物作为正极材料，其比能量是现有锂离子电池的3倍，是最新一代的锂离子电池。
特点1.用固体电解质代替了液体电解质,2.用锂离子负极材料取代了碳负极材料3.外壳用铝塑复合膜取代了钢壳铝壳与液态锂离子电池相比，聚合物锂离子电池具有可薄形化、任意面积化与任意形状化等优点，也不会产生漏液与燃烧爆炸等安全上的问题，因此可以用铝塑复合薄膜制造电池外壳，从而可以提高整个电池的比容量；聚合物锂离子电池还可以采用高分子作正极材料，其质量比能量将会比目前的液态锂离子电池提高50％以上。
锂离子电池产品规格书说明书
History of specification规格书修订记录Date Contents Remarks 2018-05-12First issue A0Content/目录1.Scope/适用范围Page42.Cell Specification/电芯规格说明Page4/53.Battery/Cell performance test Criteria/电池性能标准Page6 3.1Appearance inspection by visual/外观目测Page6 3.2Environmental test condition/外界环境条件Page6 3.3Electrical characteristics/电气特性Page6 3.4Mechanical characteristics/机械特性Page73.5Safety performance/安全性能Page7/84.Cell initial Dimensions/电芯初始尺寸Page84.2Picture of assembled battery组合电池图5.Protection Circuit保护电路5.1PCM parameter PCM参数6.Circuit topology Drawing and PIN Explanation电路布线图和焊盘说明6.1PCM BOM保护板物料清单6.2Assembled cell parameters包装后电芯组参数附录Page9 Page9 Page9 Page10 Page10 Page101.Scope/适用范围2.Cell Specification/电芯产品规格No.Item项目Specification性能1Rated Capacity额定容量3000mAh,0.2C discharging2Minimum Capacity最小容量3000mAh,0.2C discharging3Normal Voltage标称电压3.70V4O.C.V出厂电压 3.80-4.2V5Charge Ending Voltage充电截止电压4.20±0.03V6Discharge Ending Voltage放电截止电压3.0V7Standard charging method标准充电方式0.5C constant current charge to 4.2V,then constantvoltage4.2V charge till charged current declines to≤0.01C,0℃～45℃8Charge current充电电流Standard charge:0.5CRapid charge:1.0C9charging Time充电时间Standard charge:5.5～6.5hRapid charge:1.5～2.5h10Max.Charging Current最大充电电流1.0C(5℃～+45℃)11Standard dischargingCurrent标准放电电流0.5C constant current discharge to3.0V.10℃～+60℃12Max.Discharging Current最大放电电流1.0C(10℃～+60℃)13Operating environment工作环境Charging:0℃-45℃,65%±25%RHDischarging:10℃-60℃,65%±25%RH14Cell Impedance单电芯内阻＜45mohm，(4.2V AC1KHz measured)15Dimension of Single Cell单电芯尺寸Thickness Max8.0mmWidth Max56.5mmHeight Max60.5mm3.Picture of single cell单体电芯图Items Description Dimension and SpecT电芯厚度Max:8.0mmW电芯宽度Max:56.5mmH电芯长度Max:60.5mmC Tab间距18±2.0mmB Tab宽度 4.0±0.1mmD顶封宽度 4.0±0.5mmA极耳胶外露Max:2.0mmE极耳长度8.0±1.5mmFig.(1)The Dimension of Single Cell图(1)单体电池尺寸图4.Picture of assembled battery组合电池图Fig.(2)The Dimension of Assembled Battery图(2)组合电池外形尺寸图厚度T 宽度W 长度L 线径Ø线型插头型号Max:8.1Max:57.0Max:63.00.9UL1007/24#XH2.54-2P备注：UNIT 单位：MM5.产品规格及电气参数Product Specification and Electrical Parameters序号Item项目Specification性能1Assembled Mode组合方式1P2Normal Capacity标称容量≥3000mAh,0.2C discharging3Normal Voltage标称电压3.7V4Impedance成品内阻＜103mohm，(100%charge AC1KHz measured)5Assembly Dimension装配尺寸Thickness Max8.1mmWidth Max57.0mmHeight Max63.0mm4.Battery/Cell performance test Criteria/电池性能标准4.1Appearance inspection by visual/外观目测There shall be no such defect as rust,leakage,which may adversely affect commercial value of battery.电池外观应没有锈渍、污渍、漏液等影响商业价值的缺陷存在。
数据力科技有限公司DTP502535多用途聚合物锂离子可重复充电电池产品说明说明书
DATA POWER TECHNOLOGY LIMITED File No:E-SPE-1106-01Ver: 1.0Product SpecificationsPage:1/10Date:2015-11-06Product SpecificationsType：Polymer Li-ion Rechargeable BatteryModel：DTP502535Specification：3.7V/400mAhPrepared By/Date Checked By/Date Approved By/DateYang qin2015/11/06Customer confirmation：Sign/Date:Tel:+86-75523460581Fax:+86-75523460503 E-mail:*******************Revise the historyRevision Num Date Revise the items1.02015-11-06Publishes for the first time-----------Contents1Scope (4)2Product Type and Product Model (4)2.1Type (4)2.2Model (4)3Basic Product Characteristics (4)3.1Rated Capacity (4)3.2Minimum Capacity (4)3.3Nominal Voltage (4)3.4Charge Limited Voltage (4)3.5Discharge Cut-off Voltage (4)3.6End-of-charge Current (4)3.7Standard Charge (4)3.8Standard Discharge (4)3.9Maximum Continuous Charge Current (4)3.10Maximum Continuous Discharge Current (4)3.11Operating And Storage Temperature Range (4)3.12Operating And Storage Humidity Range (4)3.13Weight (4)4External Dimension (4)5Outside Appearance (5)6Basic Electrical Characteristics (5)6.1Open Circuit Voltage (5)6.2Internal Impedance (5)6.3Rated Capacity(0.2C5A) (5)6.41C5A Capacity (5)6.5Temperature Characteristics (5)6.6Storage Characteristics (5)6.7Cycle Life(20℃) (5)7Safety Characteristics (5)7.1Overcharge Characteristics (5)7.2Over-discharge Characteristics (6)7.3Short-circuit Characteristics (6)7.4Hot Oven Characteristics (6)7.5He avy Collision (6)8Reliability Characteristics (6)8.1Static Humidity and Temperature Characteristics (6)8.2Vibration Characteristics (6)8.3Bump Characteristics (7)8.4Free Drop Characteristics (7)9Assembling Request (7)9.1List of Parameter (7)9.2Parts list (7)9.3Application Circuit (7)9.4Maps (8)9.5External Dimension Drawing (9)10Guarantee Period of Quality (9)11Matters needing attention (9)12Statement (10)1.ScopeThis specification shall be applied to the batteries from Data Power Technology Limited’s product.2.Product Type and Product Model2.1Type ：Polymer Li-ion Recharged Battery 2.2Model ：DTP5025353.Product Basic CharacteristicsNo ItemCharacteristics 3.1Rated Capacity 400mAh 3.2Minimum Capacity 400mAh 3.3Nominal Voltage 3.70V 3.4Charge Limited Voltage 4.20V 3.5Discharge Cut-off Voltage 2.80V3.6End-of-charge Current 0.01C3.7Standard Charge Charge with 0.2C(80mA)up to Limited Voltage ,Charge with limited Voltage up to end-of-charge current.3.8Standard DischargeUsing 0.2C(80mA)constant current discharge to the Discharge Cut-off Voltage.3.9Maximum Continuous Charge Current1C (400mA)3.10Maximum Continuous Discharge Current 1C (400mA)3.11Operating Temperature Range Charge 0~45℃Discharge–20~60℃Storage Temperature Range-20~60℃3.12Operating And Storage Humidity Range 65±20%RH3.13WeightLess than 13g4.Cell DimensionItem Dimension （mm ）T Max 5.0W Max 25.0L Max 35.0L1Max 31.0L2Max 35.3L3 6.0±2.0M 12.0±2.0N2.0±0.5MW+T-L3NL1LL25.AppearanceIt shall be free from any defects such as remarkable scratches,breaks,cracks,discoloration,leakage,or middle deformation6.Basic Electrical CharacteristicsNo.Items Criteria Test Method6.1Open CircuitVoltage3.75V～3.95V Measure with voltmeter.6.2InternalImpedance≤200mΩMeasure cells using an alternate current impedance meter at1kHz.6.3Rated Capacity(0.2C5A)≥400mAhDischarged after the standard charged cells rest10minat23±2℃，Test can be discontinued when more than Ratedcapacity.Three cycles are permitted..6.41C5A.dischargecapacity≥400mAh×90%Discharged after the standard charged cells rest10minat23±2℃，Test can be discontinued when more than90%*rated capacity.Three cycles are permitted.6.5TemperatureCharacteristics1.Appearance：No deformation、ruptures norleakage。
电池常用英文单词
电池常用英文单词Specification 规格书Dimension Drawing, Configuration Drawing 尺寸图，结构图Approval Sheet 承认书Data Sheet 电池参数表，也叫规格书。
Bill of Materials (BOM) 原材料清单Nominal Voltage 标称电压Nominal Capacity 标称容量Minimum/Minimal Capacity 最低容量Standard Charge 标准充电Rapid/ Fast Charge 快速充电Maximum Charge Voltage 最大充电电压CC/CV: Constant Current/Constant Charge 恒流/恒压充电Maximum Continuous Discharge Current最大连续放电电流Final Charge Current, Cut-off Current充电截止电流Final Discharge Voltage Cut-off Voltage放电截止电压Initial Internal Resistance / internal impedance 内阻Service Life, Circle Life 循环寿命Charge/ Discharge/Circle Life Curve 充电/放电/循环寿命曲线Lithium ion Battery锂离子电池Lithium Metal Battery 锂金属电池Lithium Ion Cylindrical Battery 锂离子圆柱电池Lithium Ion Prismatic Battery 锂离子方形电池Lithium Ion Polymer Battery 锂离子聚合物电池Lithium Phosphate Battery 磷酸铁锂电池Chemistry System 化学体系LiCoO2钴酸锂LiCoMnNiO2 锂钴锰镍，即三元锂电池Ambient Temperature 环境温度Charge Temperature Range 充电温度范围Discharge Temperature Range 放电温度范围Open Circuit Voltage 开路电压Capacity Retention 容量保持Self-Discharge 自放电Safety Test 安全测试Over Charge 过充电Over Discharge 过放电Short Circuit 短路Heating Test 热冲击测试Impact Test 冲击测试Environmental Test 环境测试Drop Test 自由跌落测试Vibration Test 振动测试Test Report 测试报告Constant Humidity and Temperature Test 恒温恒湿测试Protection Circuit Module (PCM) or Battery Manager Systems (BMS) 保护电路或者电池管理系统integrated circuit (IC) 集成电流Mosfet场效应管Over Charge Protection Voltage过充电保护电压Over Charge Protection Delay 过充电保护延迟Over Charge release Voltage 过充电恢复电压Over Discharge Protection Voltage 过放电保护电压Over Discharge Protection Delay 过放电保护延迟Over Discharge Release Voltage 过放电恢复电压Over Current Protection 过电流保护Over Current Protection Delay过电流保护延迟Short Circuit protection 短路保护Consumption 自耗电State Of Charge Indication (SOC Indication) 剩余容量显示Balance Charge 平衡充电Temperature Detection 温度检测Communication Bus or SMbus 通讯总线Thermistor or Negative Temperature Coefficient (NTC) 热敏电阻Thermostat 温度开关Polymer Positive Temperature Coefficient (PPTC) 过流保护器Circuit Diagram电路原理图Component List 元器件清单Charging Characteristics 充电特性Discharge CharacteristicsWeight: 重量 Gross Weight (G. WT)毛重，Net Weight (N. WT) 净重Dimension 尺寸Model No., Size 型号Part NumberPurchase Order (PO)采购订单Manufacture Order (MO) 生产订单L/C?(LETTER?OF?CREDIT)信用证T/T (TELEGRAFIC TRANSFER) 电汇D/P (DOCUMENT AGAINST PAYMENT) 远期付款交单D/A (DOCUMENT AGAINST ACCEPTION) 承兑交单30% In Advance，30% deposit预付30%订金70% of the balance due 70%的余款10% Discount 10%折扣FOB (free on board) 离岸价（不含运费的价格）CIF (cost, insurance and freight) 到岸价（含运费和保险费）C&F (cost and freight) 成本加运费价（含运费不含保险费）Certification 认证Warranty 保质期External Appearance 外观Handling Instructions 操作指示Cautions 注意事项Samples 样品Fatal Defects 致命缺陷Major defect 严重缺陷Minor defect 次要缺陷Random Inspection 抽样检查Inspection Report 检验报告Final Quality Control (FQC), Outgoing Quality Control (OQC) 出货检验Input Process Quality Control (IPOC) 品质巡检Incoming Quality Control (IQC) 来料检查Sample inspectionFully inspection, Total InspectionACCEPTANCE QUALITY LIMIT (AQL) 允收水准Minimum Order Quantity (MOQ) 最低订单量Expected Time of Arrival 预计到港时间estimated time of departure 估计离港时间Lead time 交货周期。
电芯中英文规格书
2pical Capacity 典型容量 Minimum Capacity 最小容量 Nominal Voltage 标称电压 Weight 重量 尺寸 Criteria 5.5Ah 5Ah 3.7V ~168g 长度 L：130.0±0.5mm 宽度 W：68.0±0.5mm 厚度 T：9.0±0.5mm Cell：≤10mΩ Battery：≤150mΩ 4.2V 1 A (0.2C) 5 A (1.0C) 2.5 A (0.5C) 10 A (2.0C) 3.0V 0℃~+45℃ -10℃~+45℃ Charging 充电 Discharging 放电 AC 1KHz after standard charge 标准充电后 AC 1 KHz 测试 Remarks 0.5C charge and discharge for cut-off voltage 0.5C 充放 电至终止电压
Customer Approval
1
江西福斯特新能源有限公司
First New Energy Co., Ltd. History of specification 规格书修订记录 Date 20/02/2011 Contents First issue Remarks
2
江西福斯特新能源有限公司
First New Energy Co., Ltd.
2.1
2.2 2.3
2.4
Internal Impedance 内阻 Charge Voltage 充电电压
Standard Charge Current
2.5 2.6 2.7 2.8 2.9 2.10
锂离子电池包 Li-ion Battery Pack 技术数据表说明书
Page 1 of 10 Pages材料安全数据表Material Safety Data Sheet样品名称:锂离子电池包Name of Sample:Li-ion Battery Pack委托单位:傲基科技股份有限公司Commissioner：Aukey Technology Co., Ltd威凯检测技术有限公司Vkan Certification & Testing Co., Ltd.材料安全数据表Material Safety Data Sheet联合国《关于危险品货物运输的建议书》UN “Recommendations on the TRANSPORT OF DANGEROUS GOODS”签发日期：2021-03-23 Date of issue:Approved by: Huang Kun Reviewed by: Zhang Siyao Tested by: Zheng Feida批 准：审 核：检 测：Once battery shell rupture, content contact with the human body will produce harm, once contact, should take the following emergency measures:眼睛：万一接触，立即用大量的清水冲洗至少15分钟，翻起上下眼睑，直到化学的残留物消失为止，迅速就医。
Eye: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.皮肤：万一接触，用大量水冲洗至少15分钟，同时除去污染的衣物和鞋子，迅速就医。
Skin: Remove contaminated clothes and rinse skin with plenty of water or shower for 15 minutes. Get medical aid.吸入：立即从暴露处移至空气清新处，如果呼吸困难给予输氧，立即就医。
电池常用英文单词讲解学习
电池常用英文单词Specification 规格书Dimension Drawing, Configuration Drawing 尺寸图，结构图Approval Sheet 承认书Data Sheet 电池参数表，也叫规格书。
Bill of Materials (BOM) 原材料清单Nominal Voltage 标称电压Nominal Capacity 标称容量Minimum/Minimal Capacity 最低容量Standard Charge 标准充电Rapid/ Fast Charge 快速充电Maximum Charge Voltage 最大充电电压CC/CV: Constant Current/Constant Charge 恒流/恒压充电Maximum Continuous Discharge Current最大连续放电电流Final Charge Current, Cut-off Current充电截止电流Final Discharge Voltage Cut-off Voltage放电截止电压Initial Internal Resistance / internal impedance 内阻Service Life, Circle Life 循环寿命Charge/ Discharge/Circle Life Curve 充电/放电/循环寿命曲线Lithium ion Battery锂离子电池Lithium Metal Battery 锂金属电池Lithium Ion Cylindrical Battery 锂离子圆柱电池Lithium Ion Prismatic Battery 锂离子方形电池Lithium Ion Polymer Battery 锂离子聚合物电池Lithium Phosphate Battery 磷酸铁锂电池Chemistry System 化学体系LiCoO2钴酸锂LiCoMnNiO2 锂钴锰镍，即三元锂电池Ambient Temperature 环境温度Charge Temperature Range 充电温度范围Discharge Temperature Range 放电温度范围Open Circuit Voltage 开路电压Capacity Retention 容量保持Self-Discharge 自放电Safety Test 安全测试Over Charge 过充电Over Discharge 过放电Short Circuit 短路Heating Test 热冲击测试Impact Test 冲击测试Environmental Test 环境测试Drop Test 自由跌落测试Vibration Test 振动测试Test Report 测试报告Constant Humidity and Temperature Test 恒温恒湿测试Protection Circuit Module (PCM) or Battery Manager Systems (BMS) 保护电路或者电池管理系统integrated circuit (IC) 集成电流Mosfet场效应管Over Charge Protection Voltage过充电保护电压Over Charge Protection Delay 过充电保护延迟Over Charge release Voltage 过充电恢复电压Over Discharge Protection Voltage 过放电保护电压Over Discharge Protection Delay 过放电保护延迟Over Discharge Release Voltage 过放电恢复电压Over Current Protection 过电流保护Over Current Protection Delay过电流保护延迟Short Circuit protection 短路保护Consumption 自耗电State Of Charge Indication (SOC Indication) 剩余容量显示Balance Charge 平衡充电Temperature Detection 温度检测Communication Bus or SMbus 通讯总线Thermistor or Negative Temperature Coefficient (NTC) 热敏电阻Thermostat 温度开关Polymer Positive Temperature Coefficient (PPTC) 过流保护器Circuit Diagram电路原理图Component List 元器件清单Charging Characteristics 充电特性Discharge CharacteristicsWeight: 重量Gross Weight (G. WT)毛重，Net Weight (N. WT) 净重Dimension 尺寸Model No., Size 型号Part NumberPurchase Order (PO)采购订单Manufacture Order (MO) 生产订单L/C (LETTER OF CREDIT)信用证T/T (TELEGRAFIC TRANSFER) 电汇D/P (DOCUMENT AGAINST PAYMENT) 远期付款交单D/A (DOCUMENT AGAINST ACCEPTION) 承兑交单30% In Advance，30% deposit预付30%订金70% of the balance due 70%的余款10% Discount 10%折扣FOB (free on board) 离岸价（不含运费的价格）CIF (cost, insurance and freight) 到岸价（含运费和保险费）C&F (cost and freight) 成本加运费价（含运费不含保险费）Certification 认证Warranty 保质期External Appearance 外观Handling Instructions 操作指示Cautions 注意事项Samples 样品Fatal Defects 致命缺陷Major defect 严重缺陷Minor defect 次要缺陷Random Inspection 抽样检查Inspection Report 检验报告Final Quality Control (FQC),Outgoing Quality Control (OQC) 出货检验Input Process Quality Control (IPOC) 品质巡检Incoming Quality Control (IQC) 来料检查Sample inspectionFully inspection, Total InspectionACCEPTANCE QUALITY LIMIT (AQL) 允收水准Minimum Order Quantity (MOQ) 最低订单量Expected Time of Arrival 预计到港时间estimated time of departure 估计离港时间Lead time 交货周期。
聚合物动力锂离子电池-概述说明以及解释
聚合物动力锂离子电池-概述说明以及解释1.引言1.1 概述聚合物动力锂离子电池是一种新型的锂离子电池技术，采用聚合物作为电解质，相比传统液态电解质的锂离子电池具有更高的安全性、稳定性和能量密度。
随着电动汽车、储能系统等领域的快速发展，聚合物动力锂离子电池作为一种高性能的能量存储设备备受关注。
本文将从聚合物动力锂离子电池的基本原理、优势与应用以及发展趋势等方面进行详细介绍，旨在深入探讨这一新兴技术在能源领域的前景和应用前景。
1.2 文章结构文章结构部分的内容应该包括对整篇文章的组织和安排进行简要介绍，为读者提供一个清晰的框架。
在这篇关于聚合物动力锂离子电池的长文中，文章结构可以包括以下几个方面：1. 引言部分：介绍聚合物动力锂离子电池的背景和意义，引出文章的主题和研究重点。
2. 正文部分：详细讨论聚合物动力锂离子电池的基本原理、优势与应用以及发展趋势。
这部分内容将介绍该技术的工作原理、优势特点以及目前的应用领域，为读者提供全面的了解。
3. 结论部分：总结文章的主要内容和观点，展望聚合物动力锂离子电池未来的发展方向和潜力，给出结论和建议。
通过这样的文章结构，读者能够清晰地了解整篇文章的内容安排，有助于他们更好地理解和消化所介绍的知识。
1.3 目的:本文的主要目的是介绍聚合物动力锂离子电池的基本原理、优势与应用以及发展趋势。
通过对聚合物动力锂离子电池的深入探讨，旨在让读者了解该新型电池技术的特点和优势，以及在能源领域的广泛应用。
此外，本文还将探讨聚合物动力锂离子电池未来的发展方向，为读者提供对该技术发展趋势的预测和展望。
通过本文的阐述，希望能够引起读者对聚合物动力锂离子电池的关注，促进该领域的研究和发展。
2.正文2.1 聚合物动力锂离子电池的基本原理聚合物动力锂离子电池是一种新型的电池技术，它采用聚合物作为电解质和隔膜，具有较高的能量密度和安全性。
其基本原理如下：1. 正极材料：聚合物动力锂离子电池的正极通常采用锂铁磷酸(LiFePO4)、锂镍锰钴氧化物(NMC)等材料。
电池常用英文单词
电池常用英文单词Specification 规格书Dimension Drawing, Configuration Drawing 尺寸图，结构图Approval Sheet 承认书Data Sheet 电池参数表，也叫规格书。
Bill of Materials (BOM) 原材料清单Nominal Voltage 标称电压Nominal Capacity 标称容量Minimum/Minimal Capacity 最低容量Standard Charge 标准充电Rapid/ Fast Charge 快速充电Maximum Charge Voltage 最大充电电压CC/CV: Constant Current/Constant Charge 恒流/恒压充电Maximum Continuous Discharge Current最大连续放电电流Final Charge Current, Cut-off Current充电截止电流Final Discharge Voltage Cut-off Voltage放电截止电压Initial Internal Resistance / internal impedance 内阻Service Life, Circle Life 循环寿命Charge/ Discharge/Circle Life Curve 充电/放电/循环寿命曲线Lithium ion Battery锂离子电池Lithium Metal Battery 锂金属电池Lithium Ion Cylindrical Battery 锂离子圆柱电池Lithium Ion Prismatic Battery 锂离子方形电池Lithium Ion Polymer Battery 锂离子聚合物电池Lithium Phosphate Battery 磷酸铁锂电池Chemistry System 化学体系LiCoO2钴酸锂LiCoMnNiO2 锂钴锰镍，即三元锂电池Ambient Temperature 环境温度Charge Temperature Range 充电温度范围Discharge Temperature Range 放电温度范围Open Circuit Voltage 开路电压Capacity Retention 容量保持Self-Discharge 自放电Safety Test 安全测试Over Charge 过充电Over Discharge 过放电Short Circuit 短路Heating Test 热冲击测试Impact Test 冲击测试Environmental Test 环境测试Drop Test 自由跌落测试Vibration Test 振动测试Test Report 测试报告Constant Humidity and Temperature Test 恒温恒湿测试Protection Circuit Module (PCM) or Battery Manager Systems (BMS) 保护电路或者电池管理系统integrated circuit (IC) 集成电流Mosfet场效应管Over Charge Protection Voltage过充电保护电压Over Charge Protection Delay 过充电保护延迟Over Charge release Voltage 过充电恢复电压Over Discharge Protection Voltage 过放电保护电压Over Discharge Protection Delay 过放电保护延迟Over Discharge Release Voltage 过放电恢复电压Over Current Protection 过电流保护Over Current Protection Delay过电流保护延迟Short Circuit protection 短路保护Consumption 自耗电State Of Charge Indication (SOC Indication) 剩余容量显示Balance Charge 平衡充电Temperature Detection 温度检测Communication Bus or SMbus 通讯总线Thermistor or Negative Temperature Coefficient (NTC) 热敏电阻Thermostat 温度开关Polymer Positive Temperature Coefficient (PPTC) 过流保护器Circuit Diagram电路原理图Component List 元器件清单Charging Characteristics 充电特性Discharge CharacteristicsWeight: 重量 Gross Weight (G. WT)毛重，Net Weight (N. WT) 净重Dimension 尺寸Model No., Size 型号Part NumberPurchase Order (PO)采购订单Manufacture Order (MO) 生产订单L/C (LETTER OF CREDIT)信用证T/T (TELEGRAFIC TRANSFER) 电汇D/P (DOCUMENT AGAINST PAYMENT) 远期付款交单D/A (DOCUMENT AGAINST ACCEPTION) 承兑交单30% In Advance，30% deposit预付30%订金70% of the balance due 70%的余款10% Discount 10%折扣FOB (free on board) 离岸价（不含运费的价格）CIF (cost, insurance and freight) 到岸价（含运费和保险费）C&F (cost and freight) 成本加运费价（含运费不含保险费）Certification 认证Warranty 保质期External Appearance 外观Handling Instructions 操作指示Cautions 注意事项Samples 样品Fatal Defects 致命缺陷Major defect 严重缺陷Minor defect 次要缺陷Random Inspection 抽样检查Inspection Report 检验报告Final Quality Control (FQC), Outgoing Quality Control (OQC) 出货检验Input Process Quality Control (IPOC) 品质巡检Incoming Quality Control (IQC) 来料检查Sample inspectionFully inspection, Total InspectionACCEPTANCE QUALITY LIMIT (AQL) 允收水准Minimum Order Quantity (MOQ) 最低订单量Expected Time of Arrival 预计到港时间estimated time of departure 估计离港时间Lead time 交货周期（注：文档可能无法思考全面，请浏览后下载，供参考。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Page 1 of 16
Edition A0
Description
First Edition 首版
History of revisions
Prepared by Li Wenqun
李文群
Approved by
Zhao Lei 赵雷
Date 2017-02-17
Page 2 o f 1 6
Contents 内容
1.Scope 适用范围-----------------------------------------------------------------------------------------------------------------4 2.Product Dimension 产品尺寸----------------------------------------------------------------------------------------------4 3.Product configuration 产品配置-----------------------------------------------------------------------------------------------4 4.Product Specification 产品规格-----------------------------------------------------------------------------------------------5 5.Product Performance 产品性能---------------------------------------------------------------------------------------------6 6.PCM Specification 保护板规格---------------------------------------------------------------------------------------------9 7.Security Testing Standard 安规测试------------------------------------------------------------------------------------11 8.Storage and Transportation 储存和运输-------------------------------------------------------------------------------13 e Attentions 使用说明----------------------------------------------------------------------------------------------------14 10.Period of Warranty 保质期-------------------------------------------------------------------------------------------------16 11.Others 其他---------------------------------------------------------------------------------------------------------------------16 12.Note 备注---------------------------------------------------------------------------------------------------------------------16
Page 3 o f 1 6
1.Scope 使用范围
This specification is applied to KPL953048-2S1P -1400mAh battery Manufactured by KAYO MAXTAR Company Limited.
本标准适用于嘉洋美和电池有限公司所生产的 KPL953048-2S1P-1400mAh 电池。
如果样品测试合格请详细填写下表并将信息反馈给我们。
2. Kindly please contact us as soon as possible if the sample isn’t approved. Thanks!
.
如果样品测试没有合格请尽快将信息反馈给我们，谢谢！
Customer's Approval Signature 客户确认
Customer:
Li-ion Polymer Battery Specification 锂离子聚合物电池规格书
Model/型号:KPL953048-2S1P-1400mAh
Note: 1.Kindly please sign on the underneath and send it back to us if the sample is approved.
Date/日期
Checked & Approved by 审核批准
Zhao Lei 赵雷
Prepared by 制定
Li Wenqun 李文群
Date 日期
20ERY LIMITED 嘉洋美和电池有限公司 West 11-13th floor, A2 building, Zhongtai Information Technology industrial park, Dezheng Road, Shiyan Street, Baoan District, Shenzhen ,China 深圳市石岩街道石龙仔德政路中泰信息产业园 A2 栋 13 楼西 Tel: +86-755 23705980 Fax: +86-755 23705911