德国路斯霸双柱举升机介绍

SMART LIFT

2.30 SL

2.32 SL

2.32 SL MM 2.40 SL

2.40 SL MM 2.50 SL II

Spindel Two-post Lifts

SMART LIFT

The robust contruction of SMART LIFT, as well as its fully developed technique are the results of more than 10.000 units producted in one year and about 30 years experiences in lifts production.

Both low wear Nylatron-nuts convince through their long-life cycle and silent oepration. Moreover, the resistant Poly-V-belt assums transmission with the roller tempered spindle. N USSBAUM gives 5 years warranty to the spindle-system.

The solid arms are flat constructed and can lift vehicles with lowest pick-up points. Lifting of a widest range of vehicles from small passenger cars to commercial vehicles. Short car-rying arms can be turned by 180° and along with the true asymmetrical carriage, the car‘s doors can be completely opened.

An electronic system guarantees silence and synchroniza-tion by lifting and lowering. No need of mechanical top connection. Both columns can be connected together with height adjustable simple top connection.

2 high-performing motors are perfectly integrated in the slim columns. The lift has no floor connection. A LED-display is integrated in the columns for simple and safe operation, also for service purposes.

Spindel 2-post lifts: safety, multifunctional and persistent

1 Long-life cycle nylatron-nut: 5 years gurantee

2 Resistant Poly-V-belt

3 SMART LIFT 2.35 SL

4 MINI MAX

5 Door-free opening through asymmetric lifting arms

6 For very low pick-up points

7 SMART LIFT 2.30 SL

2.30 SL, 2.32 SL, 2.35 SL & MINI MAX

SMART LIFT 2.30 SL, 2.32 SL &

2.35 SL – clear and cut

• Electronic syncronization system

• Vehicles’s door can be opened

completely

• Low wear Nylatron-nut

• 5 years warranty on spindle and

spindle-nut

• Resistant Poly-V belt

• Silent operation

• Two motors integrated into

columns, no connection on floor

• Single or 2-times telescopic lif-

ting arms with low lifting point,

swivelling 180°

• Complete quality control at all

stages

The 2.30 SL, 2.32 SL and 2.35 SL are the universal lifts for passenger

car with lifting capacity from 3.000kg, 3.200kg and 3.500kg.

Versions of 2.30 SL & 2.32 SL

The 2.30 SL and 2.32 SL MB/BMW with their special c

arrying arms (480 – 870mm) are optimized.

The 2.32 SL T with 2-times telescopic and asymmetrical

lifting arms (580 –1.170mm) lifts commercial vehicles, for

example VW T5 long version.

2.30 SL MM & 2.32 SL MM – the 2-post lift with MINI MAX

arms with a special low pick-up point, for easy and conve-

nient to lift lowered vehicles and for cars with pressed side

skirts

Reliability for workshop