巴士德BPS3000电子式压力开关技术参数

巴士德BPS3000电子式压力开关技术参数

BPS3000 Electronic Pressure Switch

BPS3000电子式压力开关设置基准

BPS3000 Electronic Pressure Switch sets the benchmark

-结构紧凑，现代的设计

Compact and modern design

-可旋转320°显示器和电气连接

Rotatable 320° display and electrical connection

-4位14段LED显示

4-digit 14 segment LED display

-高EMI保护

High EMI protection

-IP65/ IP67防护等级

IP65/IP67 enclosure rating

我们很高兴地宣布，新一代3000系列的第一个版本：在BPS3000，以4位数字显示的电子式双压力开关。该BPS3000是Barksdale的新一代3000系列的电子产品将很快包括温度，液位和流量传感器技术的一部分。

We are pleased to announce the first release of the Generation 3000 Series: the BPS3000, an electronic dual pressure switch with a 4-digit display. The BPS3000 is part of Barksdale’s new Generation 3000 Series of electronic products that will soon include Temperature, Level and Flow sensor technology.

与面板高度略低于四英寸，且直径井下两寸，所述BPS3000允许紧凑的安装。大的14段LED显示屏倾斜的是美观，并允许过程压力的清晰可读性。即使单位必须倒置安装，内部软件能够转动它的显示180°的。此外，320°旋转的电气连接和显示器外壳，使安装设备非常简单有助于降低安装成本，允许安装方法和位置的多功能性。鲁棒EMI保护，允许在今天的工厂，其中电动势和高功率对讲机存在稳定的输出。此外，IP67级额定外壳使得本机适用于最潮湿的环境，甚至完全被水淹没。

With a panel height just under four inches, and a diameter well under two inches, the BPS3000 allows for a compact installation. The large 14 segment LED angled display is aesthetically pleasing and allows clear readability of the process pressure. Even if the unit must be mounted upside down, the internal software is capable of rotating its display 180°. Plus, the 320° rotatable electrical connection and display housing, makes installing the unit very simple helping reduce installation costs allowing for versatility of installation method and location. Robust EMI protection allowing for stable output in today’s factories where EMF and high powered walkie-talkies are present. Additionally, the IP67 class rated housing makes this unit suitable for the wettest of environments, and even full submersion.

压力范围可从0到3磅至0至9000磅，以绝对压力为高达150 PSIA。多种工艺连接作为标准从¼“NPT 至7/16”SAE只是仅举几例。该BPS3000还提供

分别提供模拟输出信号为0〜10 V DC到4至20 mA发射器的功能。的可读范围可以安装使更多的灵活性期间设置。

Pressure ranges are available from 0 to 3 psi up to 0 to 9000 psi, with absolute pressure ranges up to 150 psia. Multiple process connections are offered as standard from ¼” NPT to 7/16” SAE just to name a few. The BPS3000 also offers

transmitter functionality by supplying analogue output signals 0 to 10 V DC to 4 to 20 mA respectively. The readable range can be set during installation enabling more flexibility.