lexmarkMS310操作手册

© 2015 Lexmark International, Inc. All rights reserved.
26
谢
谢
© 2015 Lexmark International, Inc. All rights reserved.
27
MS310 Series
打印机配置
打印机配置
© 2015 Lexmark International, Inc. All rights reserved.
2
打印机面板
© 2015 Lexmark International, Inc. All rights reserved.
3
错误代码指示灯
© 2015 Lexmark International, Inc. All rights reserved.
© 2015 Lexmark International, Inc. All rights reserved.
25
Controller board/control panel replacement（主板和面板带有镜像文 件，不要同时更换主板和面板）
1 Replace the controller board first. Note: Do not replace the new control panel and controller board in the machine at the same time. 2 After installing the new controller board, and before installing the new control panel, start the printer into diagnostics mode. 3 After the printer has completed startup, turn off the printer and replace the control panel. Note: If the control panel display has failed, the printers’ startup cycle is complete when the driver motor and fans shut down, and the machine is quiet
3 Press and hold 4 Press and hold
5 POR the printer to exit the Service menus.（重新开机后退出维修菜单）
© 2015 Lexmark International, Inc. All rights reserved.
4 Turn on the printer.（打开打印机电源） 5 Release the button after 10 seconds.（10秒后松开按钮）
© 2015 Lexmark International, Inc. All rights reserved.
21
Service menus
19
Service menus（维修菜单）
Navigating through the Service menus（菜单导航页）
Menus are represented by the light represented by the light sequences. sequences. Menu options and their values are
To navigate through the Service menus:
1 Press 2 Press to advance to the desired menu.（进入所需选项菜单） to advance to the desired menu option value.（选定改选项的值） until all of the lights cycle to perform the function or save the menu option value.（保存） to return to the home menu.（返回主菜单）
© 2015 Lexmark International, Inc. All rights reserved.
22
Service menus
Entering Invalid engine mode This mode is used if the printer has an invalid code and needs the correct code loaded. After entering this mode, the firmware code can be updated. 1 Turn off the printer. 2 Press and hold 3 Turn on the printer. 4 Release the buttons after 10 seconds. and .
13
成像部件消息
© 2015 Lexmark International, Inc. All rights reserved.
14
成像部件消息
© 2015 Lexmark International, Inc. All rights reserved.
15
成像部件消息
© 2015 Lexmark International, Inc. All rights reserved.
7
© 2015 Lexmark International, Inc. All rights reserved.
8
卡纸区域
打开盖门并拉出进纸匣来访问卡纸区域
© 2015 Lexmark International, Inc. All rights reserved.
9
碳粉盒消息
© 2015 Lexmark International, Inc. All rights reserved.
Diagnostics Menu
Print Diagnostics Menu Instruction Sheet（打印诊断菜单）
This prints a page that contains:（诊断菜单包含以下内容）
• Instructions on how to navigate through the Diagnostics menu settings（设置方法） • The order of the Diagnostics menu settings, the LED pattern that represents each setting, the current value of each setting, and each setting’s possible values（通过LED显示每次设置的值） Print Quality Pages（打印测试页） This enables the user to view the values of the printer settings and to test its ability to generate acceptable printed output.（显示设置的值）
4
错误代码指示灯
© 2015 Lexmark International, Inc. All rights reserved.
5
错误代码指示灯
© 2015 Lexmark International, Inc. All rights reserved.
6
错误代码指示灯
© 2015 Lexmark International, Inc. All rights reserved.
© 2015 Lexmark International, Inc. All rights reserved.
23
Maintenance
易损件更换检查表
© 2015 Lexmark International, Inc. All rights reserved.
24
MS310/MS410 纸张通道
16
加载纸张
© 2015 Lexmark International, Inc. All rights reserved.
17
加载纸张
© 2015 Lexmark International, Inc. All rights reserved.
18
Βιβλιοθήκη Baidu
从标准接纸架上取走纸张
© 2015 Lexmark International, Inc. All rights reserved.
20
Service menus（服务菜单）
Entering the Diagnostics menu（诊断菜单） 1 Turn off the printer.（关闭打印机） 2 Open the front access cover.（打开前面板盖） 3 Press and hold .（按住 按钮）
10
碳粉盒消息
© 2015 Lexmark International, Inc. All rights reserved.
11
碳粉盒消息
© 2015 Lexmark International, Inc. All rights reserved.
12
碳粉盒消息
© 2015 Lexmark International, Inc. All rights reserved.