立磨机资料-0005007143_000010_Dimensional drawing text_REV_AB_EN

Balancing of rotor: dynamically balanced with half key without half-coupling DR = Direction of rotation (facing drive end DE) Counter-clockwise only LE = Air inlet LA = Air outlet SP = Center of gravity WA = Shaft extension DE XA = Relief groove DE LB = Lifting lug (self-aligning)
Type 1LA4 504-6EN64-Z
Ident-No 5007143/010-M003
I DT LD TD MF-NMA EN
Siemens AG
AB
Index Text
22.11.2010
Date
Otto
Name
Nbg Vo
WORD-Textgenerator V.1.0.0
Earthing connection: max. admissible conductor cross-section with cable lug according to DIN46234 DIN46235 2 400 mm2 240 mm
The lifting lugs are designed to carry the weight of machine only. No lifting of machine allowed together with base frame, adaptorplate or sole plates ! Weight of rotor 2.327 t
DR = Direction of rotation (facing drive end DE): The machine is only suitable for counter-clockwise direction of rotation. Counter-clockwise rotation: connection of the system phases L1 L2 L3 in the positive sequence of the machine terminals V U W.
AB
Index Text
22.11.2010
Date
Otto
Name
Nbg Vo
WORD-Textgenerator V.1.0.0
1,2 Leads brought out free for stator system connection and star point Quantity leads for stator 3 Quantity leads for starpoint 3 Free length 3m Cable outer diameter d1 = 15.4 mm Conductor outer diameter d2 = 9.2 mm Conductor cross-section 35 mm² Bending radius r ≥ 4d2
Date Name Checked.
22.11.2010 Otto Spa
Details for machine dimension drawing
Type 1LA4 504-6EN64-Z
Ident-No 5007143/010-M005
I DT LD TD MF-NMA EN
Siemens AG
Earthing connection 1,2 Leads brought out free for stator system connection and star point 3 Terminal box for auxiliary circuits Type 1XB9014
5
Separate terminal box for anti-condensation heater Type 1XB9014 6232C3 7328BG
WA = Shaft extension DE Centering hole XA = Relief groove DE
DR M30x63 E4x0.5 - DIN 509
Date Name Checked.
22.11.2010 Otto Spa
Details for machine dimension drawing
Date Name Checked.
22.11.2010 Otto Spa
Details for machine dimension drawing
Type 1LA4 504-6EN64-Z
Ident-No 5007143/010-M004
I DT LD TD MF-NMA EN
Siemens AG
Legend for machine dimension drawing
Type of construction Degree of protection Method of cooling Ambient temperature Total weight IM V1 IP 55 IC 411 -20...+40°C 7.3 t
AB
Index Text
22.11.2010
22.11.2010 Otto Spa
10 Rolling contact bearing DE Type 11 Rolling contact bearing NDE Type
Date Name Checked.
Details for machine dimension drawing
Type 1LA4 504-6EN64-Z
Ident-No 5007143/010-M002
I DT LD TD MF-NMA EN
Siemens AG
ABIndex Text源自22.11.2010Date
Otto
Name
Nbg Vo
WORD-Textgenerator V.1.0.0
Additional instructions for project work