英文合同模板 SALE CONTRACT
英文销售合同模板3篇
英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。
英文销售合同模板3篇
英文销售合同模板3篇篇1Sales Contract TemplateThis Sales Contract (the "Contract") is entered into between [Seller Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Sale of GoodsThe Seller agrees to sell, and the Buyer agrees to purchase, the following goods (the "Goods"):Description of Goods: [Description]Quantity: [Quantity]Price: [Price]2. DeliveryThe Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery Address]. The Goods shall be delivered on or before the agreed upon delivery date, which is [Delivery Date].3. PaymentThe Buyer agrees to pay the Seller the total purchase price of [Total Purchase Price] in the following manner:- [Payment Method] in the amount of [Deposit Amount] upon signing of this Contract- [Payment Method] in the amount of [Balance Amount] upon delivery of the Goods4. Title and Risk of LossTitle to the Goods shall pass to the Buyer upon delivery. The risk of loss or damage to the Goods shall pass to the Buyer upon delivery.5. WarrantiesThe Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications as set forth in this Contract.6. Limitation of LiabilityThe Seller shall not be liable for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Seller's Country].In witness whereof, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________________Buyer: ______________________________[Signature][Print Name][Title][Date]篇2Sales Contract TemplateThis Sales Contract ("Contract") is made and entered into as of [date] by and between [Seller], with a principal place ofbusiness at [address] ("Seller"), and [Buyer], with a principal place of business at [address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the "Goods"): [description of goods], in accordance with the terms and conditions of this Contract.2. Quantity and Price: The quantity of Goods to be sold and purchased, as well as the price per unit, shall be as set forth in Exhibit A attached hereto and incorporated herein by reference.3. Payment Terms: Buyer shall pay Seller the total purchase price for the Goods within [number] days of the date of delivery of the Goods. Payment shall be made in [currency] by [method of payment].4. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.5. Inspection and Acceptance: Buyer shall have [number] days from the date of delivery of the Goods to inspect the Goods and notify Seller in writing of any defects or nonconformities.Failure to give such notice shall constitute acceptance of the Goods by Buyer.6. Warranties: Seller warrants that the Goods shall conform to the specifications set forth in this Contract and shall be free from defects in material and workmanship for a period of [number] days from the date of delivery.7. Limitation of Liability: In no event shall either party be liable for any incidental, consequential, or punitive damages arising out of or in connection with this Contract, whether based on warranty, contract, tort, or any other legal theory.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of laws principles.9. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:_____________________________________[Signature]Buyer:_____________________________________[Signature]篇3Sales Contract TemplateThis Sales Contract is entered into on [Date], by and between [Seller's Name], with a business address at [Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with a business address at [Address] (hereinafter referred to as "Buyer").WHEREAS, the Seller is engaged in the business of selling [Products or Services]; andWHEREAS, the Buyer desires to purchase [Products or Services] from the Seller under the terms and conditions set forth herein;NOW, THEREFORE, in consideration of the mutual promises and covenants set forth in this Sales Contract, the parties agree as follows:1. Products or Services: The Seller agrees to sell and deliver to the Buyer the following products or services: [Detailed description of products/services, including quantity, quality, specifications, and delivery date].2. Purchase Price: The purchase price for the products or services shall be [Amount] per [Unit] for a total of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Payment Method] upon delivery of the products or services.3. Delivery: The Seller shall deliver the products or perform the services at the location specified in writing by the Buyer. Delivery shall be made on or before [Delivery Date], unless otherwise agreed upon in writing by the parties.4. Inspection and Acceptance: The Buyer shall have [Number of Days] days after delivery to inspect the products or services and notify the Seller in writing of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products or services shall be deemed accepted.5. Warranties: The Seller warrants that the products or services will conform to the specifications set forth in this Sales Contract. The Seller further warrants that the products are free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery.6. Limitation of Liability: The Seller's liability under this Sales Contract shall be limited to the purchase price paid by the Buyer for the products or services. In no event shall the Seller be liable for any consequential, incidental, or punitive damages.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of [State], without regard to its conflict of laws principles.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________[Signatures of parties][Printed Names of parties]This Sales Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements, understandings, negotiations, and discussions, whether oral or written. This Sales Contract may be amended only by a written instrument executed by both parties.。
外贸销售合同样本中英文6篇
外贸销售合同样本中英文6篇篇1International Sales ContractThis International Sales Contract is entered into on [date], by and between:Seller: [Name of Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address], represented by [Name of Representative], (hereinafter referred to as the "Seller");AndBuyer: [Name of Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address], represented by [Name of Representative], (hereinafter referred to as the "Buyer");Hereinafter collectively referred to as the "Parties".WHEREAS, the Seller is engaged in the business of manufacturing and selling [description of products]; andWHEREAS, the Buyer desires to purchase [description of products] from the Seller for resale in [Country] and the Seller agrees to sell such products to the Buyer;NOW, THEREFORE, in consideration of the mutual agreements contained herein, the Parties agree as follows:1. Product Description: The Seller agrees to sell and the Buyer agrees to purchase [description of products] in accordance with the terms and conditions of this Contract.2. Quantity: The quantity of the products to be purchased from the Seller shall be [quantity] units, unless otherwise agreed upon by the Parties.3. Price: The price per unit of the products shall be [price] USD, subject to adjustment as provided in this Contract.4. Payment Terms: Payment shall be made by the Buyer to the Seller in [currency] in the following manner: [payment terms].5. Delivery: The Seller shall deliver the products to the Buyer at [delivery location] within [delivery time frame] days from the date of this Contract.6. Inspection: The Buyer shall have the right to inspect the products upon delivery and reject any products that do not meet the specifications set forth in this Contract.7. Warranty: The Seller warrants that the products sold under this Contract shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first written above.Seller:Name:Title:Buyer:Name:Title:This International Sales Contract is hereby accepted and agreed to by the Parties as indicated by their signatures below:Signature of Seller: ______________________________Signature of Buyer: ______________________________Date: ______________________________篇2International Sales ContractParties to the ContractSeller: [Company Name]Address: [Company Address]Contact person: [Contact Person]Telephone: [Contact Number]Email: [Email Address]Buyer: [Company Name]Address: [Company Address]Contact person: [Contact Person]Telephone: [Contact Number]Email: [Email Address]Details of GoodsDescription: [Detailed description of goods] Quantity: [Number of units]Unit Price: [Price per unit]Total Price: [Total price of goods]Delivery TermsDelivery Deadline: [Date]Delivery Location: [Address]Delivery Method: [Method of transportation]Payment TermsPayment Method: [Method of payment]Payment Deadline: [Date]Currency: [Currency]Quality ControlAll goods must meet the required quality standards as specified in the contract. The Buyer has the right to inspect the goods upon delivery and reject any defective products.Force MajeureIf either party is unable to fulfill their obligations under this contract due to force majeure events such as natural disasters, strikes, or government regulations, they are not liable for damages.ConfidentialityBoth parties agree to keep all information related to this contract confidential and not disclose it to third parties without consent.Dispute ResolutionAny disputes arising from this contract will be resolved through negotiation between the parties. If no agreement can be reached, the matter will be referred to arbitration.SignaturesSeller: ________________________ Date: _______________Buyer: ________________________ Date: _______________This contract is legally binding upon signing by both parties.Note: This is a sample contract and may need to be customized according to the specific requirements of the parties involved.篇3International Sales ContractThis International Sales Contract is made and entered into on [date], by and between [Company A], located at [address],hereinafter referred to as the "Seller", and [Company B], located at [address], hereinafter referred to as the "Buyer".WHEREAS, the Seller is engaged in the business of manufacturing and selling [products], and the Buyer is interested in purchasing said [products];NOW, THEREFORE, in consideration of the mutual covenants and agreements herein contained, the parties hereto agree as follows:1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1 description]- [Product 2 description]- [Product 3 description]2. Quantity and PriceThe quantity to be purchased shall be [quantity] of each product at the price of [price] per unit. The total purchase price shall be [total amount].3. Payment TermsThe Buyer shall make payment by [payment method] on [payment schedule].4. Delivery TermsThe Seller shall deliver the products to the Buyer's designated location at the Buyer's expense. The delivery date shall be on or before [delivery date].5. Inspection and AcceptanceThe Buyer shall have [number of days] days from the date of delivery to inspect and accept the products. Any defects ornon-conformities must be reported in writing to the Seller within said period.6. WarrantyThe Seller warrants that the products shall be free from defects in materials and workmanship for a period of [warranty period]. If any defects are found within said period, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.SELLER: [Company A]By: _______________________Print Name: ________________Title: ______________________BUYER: [Company B]By: _______________________Print Name: ________________Title: ______________________This International Sales Contract shall become effective upon the signing by both parties.篇4International Sales ContractThis International Sales Contract ("Contract") shall be made and entered into as of [Date], by and between:Seller: [Name of Seller] (hereinafter referred to as "Seller")Address: [Address of Seller]Telephone: [Phone Number of Seller]Email: [Email Address of Seller]Buyer: [Name of Buyer] (hereinafter referred to as "Buyer")Address: [Address of Buyer]Telephone: [Phone Number of Buyer]Email: [Email Address of Buyer]WHEREAS, Seller is engaged in the business of exporting goods internationally; andWHEREAS, Buyer desires to purchase and import the goods from Seller; andNOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties agree as follows:1. Sale of Goods: Seller agrees to sell and deliver to Buyer the following goods:Description of Goods: [Description]Quantity: [Quantity]Unit Price: [Price]2. Delivery: Seller shall deliver the goods to the address specified by Buyer no later than [Delivery Date].3. Payment: Buyer shall pay Seller the total amount of [Total Amount] within [Number] days of receipt of the goods.4. Inspection and Acceptance: Buyer shall inspect the goods upon delivery and shall notify Seller in writing of any defects or discrepancies within [Number] days of receipt.5. Title and Risk of Loss: Title to the goods shall pass to Buyer upon delivery. Risk of loss shall pass to Buyer upon delivery.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution: Any disputes arising under this Contract shall be resolved by arbitration in [City], [Country] in accordance with the rules of [Arbitration Organization].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Signature: _______________________________Print Name: _______________________________Buyer:Signature: _______________________________Print Name: _______________________________This Contract is made and entered into as of the date first above written.[Date]【外贸销售合同样本-英文】国际销售合同本国际销售合同（“合同”）应于【日期】之日起生效，并由如下双方达成一致：卖方：【卖方名称】（以下简称“卖方”）地址：【卖方地址】电话：【卖方电话】电子邮件：【卖方邮箱】买方：【买方名称】（以下简称“买方”）地址：【买方地址】电话：【买方电话】电子邮件：【买方邮箱】鉴于，卖方从事国际商品出口业务；以及鉴于，买方希望从卖方购买并进口商品；以及现在，因此，考虑到本合同中包含的双方协议与约定，各方同意如下：1. 商品销售：卖方同意销售并交付以下商品给买方：商品描述：【描述】数量：【数量】单价：【价格】2. 交付：卖方应在【交付日期】之前将商品交付至买方指定的地址。
销售合同英文版6篇
销售合同英文版6篇篇1Sales ContractThis Sales Contract (the "Contract") is made and entered into on [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods described in Exhibit A (the "Goods").2. Purchase PriceThe purchase price for the Goods shall be [amount] (the "Purchase Price"). Buyer agrees to pay the Purchase Price to Seller in full upon delivery of the Goods.3. DeliverySeller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Any delay in delivery shall entitle Buyer to cancel this Contract.4. Inspection and AcceptanceBuyer shall inspect the Goods promptly upon delivery. Buyer may reject any Goods that are damaged, defective, or not in conformity with the specifications set forth in Exhibit A. Any rejected Goods shall be returned to Seller at Seller's expense.5. Payment TermsBuyer shall pay the Purchase Price to Seller by [payment method] within [number] days of delivery of the Goods. Late payments shall accrue interest at a rate of [percentage] per month.6. WarrantiesSeller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Seller further warrants that the Goods are free and clear of any liens or encumbrances.7. Limitation of LiabilityIn no event shall either party be liable to the other for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract, even if such party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State].9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Buyer:[Signatures]EXHIBIT A[Description of Goods]This Sales Contract is hereby accepted by both parties:Seller: Buyer:[Signatures] [Signatures]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is agreed upon between [Seller Company Name], with its registered office located at [Address], and [Buyer Company Name], with its registered office located at [Address], on [Date].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, quality, and price].2. Payment: The Buyer agrees to pay the Seller the total sum of [Total amount] for the goods as specified in Clause 1. Payment shall be made in [Currency] within [Number of days] days from the date of delivery.3. Delivery: The Seller shall deliver the goods to the Buyer's address as specified in this Contract, within [Number of days] days from the date of signing this Contract unless otherwise agreed upon by both parties.4. Inspection and Acceptance: The Buyer shall inspect the goods upon delivery and shall have [Number of days] days to notify the Seller of any defects or non-conformities. Failure to do so will be deemed as acceptance of the goods.5. Warranties: The Seller warrants that the goods are free from defects in materials and workmanship and are fit for the purpose for which they are intended. The Seller shall remedy any defects or non-conformities at its own expense.6. Indemnity: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising out of the Seller's breach of this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country/State].8. Dispute Resolution: Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration Board].9. Confidentiality: Both parties agree to maintain the confidentiality of all information exchanged in connection with this Contract.10. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Company Name] [Buyer Company Name]By: __________________________ By: __________________________Name: Name:Title: Title:Date: Date:篇3Sales ContractThis Sales Contract (“Contract”) is made and entered into this [date], by and between [Seller name], with its principal place of business at [Seller address] (“Seller”) and [Buyer name], with its principal place of business at [Buyer address] (“Buyer”).WHEREAS, Seller desires to sell and Buyer desires to purchase certain goods on the terms and conditions set forth in this Contract;NOW, THEREFORE, in consideration of the mutual covenants and promises made by the parties hereto, the Seller and Buyer agree as follows:1. Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”):[List of Goods]2. Quantity: The quantity of Goods to be sold and purchased under this Contract shall be as set forth in the Purchase Order agreed upon by the parties.3. Price: The purchase price for the Goods shall be [Price] per unit, for a total purchase price of [Total Price]. Payment shall be made in full upon delivery of the Goods.4. Delivery: The Goods shall be delivered by Seller to Buyer at the following address: [Delivery Address]. Delivery shall be completed on or before the agreed upon delivery date specified in the Purchase Order.5. Inspection and Acceptance: Buyer shall have [number] days after delivery of the Goods to inspect and test the Goods. IfBuyer determines that the Goods are not in conformity with the specifications set forth in this Contract, Buyer shall notify Seller in writing within such [number] day period, and Seller shall be responsible for replacing or repairing the Goods at Seller’s expense.6. Risk of Loss: The risk of loss of the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer at the delivery address specified in this Contract.7. Warranties: Seller warrants that the Goods will conform to the specifications set forth in this Contract and will be free from defects in material and workmanship for a period of [number] days from the date of delivery. Seller’s sole liability and Buyer’s exclusive remedy for breach of this warranty shall be the replacement or repair of the defective Goods.8. Limitation of Liability: In no event shall either party be liable for any consequential, incidental, special or punitive damages, including lost profits, arising out of or related to this Contract.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the state of [state].10. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed by their respective authorized representatives as of the day and year first above written.SELLER: BUYER:________________________ _______________________[Seller Name] [Buyer Name]By: By:Name: Name:Title: Title:篇4Sales ContractThis Sales Contract ("Contract") is entered into on [Date] between [Seller], a company organized and existing under thelaws of [Country], having its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], having its principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit. Buyer shall pay the total purchase price to Seller in accordance with the payment terms set forth in Exhibit B attached hereto.3. Delivery: Seller shall deliver the Goods to Buyer at the location specified in Exhibit A within [Number] days after the date of this Contract. Buyer shall be responsible for all shipping and handling costs related to the delivery of the Goods.4. Inspection and Acceptance: Buyer shall inspect the Goods upon delivery and shall notify Seller of any defects ornon-conformities within [Number] days of delivery. Buyer's failure to notify Seller within the specified time period shall be deemed acceptance of the Goods.5. Warranties: Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of Liability: Seller shall not be liable for any incidental, consequential, or punitive damages arising out of or related to this Contract, whether in contract, tort, or otherwise.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or related to this Contract shall be resolved by arbitration in accordance with the rules of [Arbitration Association].[Remainder of page intentionally left blank; signature page follows.]IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: Buyer:__________________________ _________________________[Signature] [Signature][Name] [Name][Title] [Title]篇5Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Date] by and between [Seller Name], with a mailing address of [Seller Address] ("Seller"), and [Buyer Name], with a mailing address of [Buyer Address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”): [Description of Goods].2. Purchase Price: The total purchase price for the Goods shall be [Purchase Price], which shall be paid in the following manner: [Payment Terms].3. Delivery: Seller agrees to deliver the Goods to Buyer’s address at [Buyer Address] within [Delivery Timeframe]. Time is of the essence with respect to delivery.4. Inspection and Acceptance: Buyer shall have [Inspection Period] days from the delivery of the Goods to inspect and accept or reject the Goods. If Buyer rejects the Goods, Buyer shallpromptly notify Seller in writing with an explanation of the reasons for rejection.5. Warranty: Seller warrants that the Goods will be free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery. If the Goods are defective, Seller shall replace or repair the Goods at no additional cost to Buyer.6. Limitation of Liability: Seller’s liability und er this Contract shall be limited to the purchase price paid by Buyer for the Goods.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral, between the parties.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]____________________ ____________________Seller BuyerDate: ___________________ Date: ___________________This Sales Contract is effective as of the date first written above.篇6Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].1. Sale of GoodsSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"):Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Price per unit]Total Price: [Total price of Goods]2. DeliverySeller shall deliver the Goods to Buyer at the address specified by Buyer on or before [delivery date]. Delivery shall be made by [mode of transportation]. Buyer shall be responsible for any shipping and handling costs associated with the delivery of the Goods.3. PaymentBuyer shall pay Seller the total price of the Goods upon delivery. Payment shall be made in [currency] by [method of payment].4. Inspection and AcceptanceBuyer shall inspect the Goods upon delivery and shall have [number] days to notify Seller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, Buyer shall be deemed to have accepted the Goods.5. WarrantiesSeller warrants that the Goods shall conform to the description provided and shall be free from defects in material and workmanship. Buyer's sole remedy for breach of this warranty shall be the replacement or repair of the defective Goods.6. Limitation of LiabilitySeller shall not be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with the sale or use of the Goods.7. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [country]. Any disputes arising under this Contract shall be resolved through arbitration in [city], in accordance with the rules of [arbitration organization].8. Entire AgreementThis Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller]By:_________________________Name:_______________________Title:_______________________[Buyer]By:_________________________ Name:_______________________ Title:_______________________。
最新英文销售合同模板6篇
最新英文销售合同模板6篇全文共6篇示例，供读者参考篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its registered office located at [address], and [Buyer], a company organized and existing under the laws of [country], with its registered office located at [address]. Seller and Buyer shall be collectively referred to as the “Parties.”1. Sale of Goods1.1 Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”): [description of goods].1.2 The quantity of Goods to be delivered by Seller shall be as specified in [Attachment Title], attached to this Contract and hereby incorporated by reference.1.3 The purchase price of the Goods shall be [amount] [currency]. Buyer shall pay the purchase price to Seller in accordance with the terms set forth in this Contract.2. Delivery2.1 Seller shall deliver the Goods to Buyer’s premises located at [address] on or before [delivery date].2.2 Buyer shall inspect the Goods upon delivery and shall have [number] days from the date of delivery to notify Seller of any non-conformity in the quantity or quality of the Goods. In the absence of such notification, the Goods shall be deemed accepted by Buyer.3. Payment3.1 Buyer shall pay the purchase price to Seller by [payment method] within [number] days from the date of delivery of the Goods.3.2 In the event of late payment, Buyer shall pay interest on the overdue amount at the rate of [interest rate] per annum, calculated daily.4. Warranties and Representations4.1 Seller warrants and represents that:a) Seller has the right to sell the Goods;b) The Goods are free from any encumbrance, lien, or claim of any third party; andc) The Goods are of merchantable quality and fit for the purpose intended.4.2 Buyer acknowledges that it has not relied on any representations or warranties made by Seller except as expressly set forth in this Contract.5. Governing Law5.1 This Contract shall be governed by and construed in accordance with the laws of [country].5.2 Any dispute arising out of or in connection with this Contract shall be settled through negotiation between the Parties. If the Parties fail to reach a resolution within [number] days, the dispute shall be referred to [arbitration court] for arbitration.IN WITNESS WHEREOF, the Parties hereto have executed this Contract on the date first above written.[Seller]By: ____________________Name: _________________Title: _________________[Buyer]By: ____________________Name: _________________Title: _________________[Attachment Title] – Description of GoodsThis Sales Contract is effective as of the date first above written.【注意】以上内容仅为范本，具体签订时请根据具体情况进行修改。
销售合同英文范本3篇
销售合同英文范本3篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:whereby both parties agree as follows:1. Scope of ContractThis Contract covers the sale of the following goods: [具体商品名称及规格] in the amount and according to the terms stipulated below.2. Price and Payment TermsThe Price for the goods is fixed at _______ (货币及金额) FOB (目的港名). Payment is to be made by _______ (付款方式，例如：T/T电汇，L/C信用证等) against the first copy of the shipping documents.3. DeliveryThe Seller shall deliver the goods within ____ (交货时间) after receiving the order. The Seller shall notify the Buyers bycable/telefax of the date of dispatch and the shipping documents available for collection within ____ (通知时间范围) after shipment from the port of loading.4. Quality and Quantity InspectionThe quality and quantity of the goods shall be examined and certified by the Inspection Bureau at the port of discharge in accordance with the contract stipulations. If any claim is found to be justified, the Seller shall be responsible for any loss thus incurred to the Buyer.5. Packing and Shipping Marks6. InsuranceThe Seller shall cover risks for each shipment under this Contract against ICC (A) or any other relevant risks common in ocean shipping for the full amount of invoice plus 10% value up to ____% damage.7. Warranty8. Force Majeure9. Settlement of Disputes篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of the goods described in this Contract and desires to sell and the Buyer desires to purchase the goods on the terms and conditions stated below:1. Description of the Goods:The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods which are listed in Annexure Aattached to this Contract. The specifications, quantity, and other terms and conditions are also mentioned in Annexure A.2. Price:The total price for the goods listed in Annexure A shall be the sum specified in the Contract, in the currency stated, without any deduction.3. Terms of Payment:Payment for the goods shall be made through bank transfer in advance. The details of payment terms are specified in Annexure B attached to this Contract.4. Delivery:The Seller shall deliver the goods in accordance with the terms specified in Annexure C attached to this Contract. The Seller shall be responsible for arranging suitable transportation for the goods and ensuring timely delivery.5. Quality Assurance:6. Risks and Insurance:The risks of damage to or loss of the goods shall pass to the Buyer upon delivery of the goods to the carrier at the point specified in Annexure C. The Seller shall be responsible forarranging insurance against any risks commonly covered against such loss or damage during transportation.7. Warranty and Claims:8. Force Majeure:9. Settlement of Disputes:10. General Clauses:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. PRODUCTS AND SPECIFICATIONSThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which includes product name, specifications, quantity, and agreed price. The Seller shall ensure that the products are in accordance with the specifications mentioned in this Contract.2. PRICE AND PAYMENT3. DELIVERY AND QUALITY4. PACKAGING AND MARKINGThe Seller shall ensure that proper packaging of the goods is done in a way that guarantees safe transportation and protection from damage or loss during transit. All packages must be properly marked with necessary details such as product name, quantity, and other necessary information.5. INSPECTION AND ACCEPTANCE6. FORCE MAJEURE7. CONFIDENTIALITYBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose any confidential information to any third party without the prior written consent of the other party.8. WARRANTIES AND GUARANTEES9. TERMINATION10. MISCELLANEOUS。
中英文销售合同5篇
中英文销售合同5篇篇1Sales ContractThis Sales Contract ("Contract") is made on [Insert Date], between [Seller’s Name], with its principal place of business located at [Seller’s Address], and [Buyer’s Name], with its principal place of business located at [Buyer’s Address]. Seller and Bu yer are collectively referred to as the “Parties”.1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1], quantity: [Quantity], unit price: [Price]- [Product 2], quantity: [Quantity], unit price: [Price]- [Product 3], quantity: [Quantity], unit price: [Price]2. Delivery: The Seller agrees to deliver the products as follows:- Delivery Location: [Delivery Address]- Delivery Date: [Date]- Delivery method: [Method]3. Payment: The Buyer agrees to pay the Seller for the products in the following manner:- Total Price: [Total Amount]- Payment Method: [Method]- Payment Terms: [Terms]4. Inspection and Acceptance: The Buyer shall inspect the products upon delivery and shall have [Number] days to notify the Seller of any defects. Failure to notify the Seller within the specified period shall constitute acceptance of the products.5. Warranty: The Seller warrants that the products will be free from defects in materials and workmanship for a period of [Warranty Period]. If any defects are discovered within the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Liability: The Seller shall not be liable for any damages resulting from the use or misuse of the products by the Buyer or any third party.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].8. Entire Agreement: This Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Date: ________________________[Attach signatures of both parties]This Sales Contract is hereby agreed to by the Parties as of the date first written above.[Seller’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________[Buyer’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________篇2Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], with its principal place of business located at [address], and [Buyer], with its principal place of business located at [address].1. Goods SoldSeller agrees to sell and Buyer agrees to purchase the following goods:- Description of goods- Quantity- Price2. DeliverySeller shall deliver the goods to Buyer at the following address: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for any shipping costs associated with the delivery of the goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the goods, which shall be [total amount]. Payment shall be made in the following manner:- [Payment method]- [Payment schedule]4. WarrantiesSeller warrants that the goods sold under this contract are free from defects in materials and workmanship and conform to the specifications provided by the Seller. Seller further warrants that it has good and marketable title to the goods. Any claims for breach of warranty must be made within [timeframe] after delivery of the goods.5. Inspection and AcceptanceBuyer shall have [number] days after delivery of the goods to inspect them. If Buyer finds any defects or nonconformities, Buyer must notify Seller in writing within [timeframe]. Seller shall have the opportunity to inspect the goods and make any necessary repairs or replacements.6. Limitation of LiabilitySeller's liability for any breach of this contract or for any claims arising out of the sale of the goods is limited to the purchase price of the goods. Seller shall not be liable for any consequential, incidental, or punitive damages.7. Governing LawThis contract shall be governed by the laws of[state/country]. Any disputes arising out of this contract shall be resolved through arbitration in [location].8. Entire AgreementThis Sales Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Sales Contract as of the date first written above.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇3Sales ContractThis Sales Contract (hereinafter referred to as "Contract") is entered into by and between Party A [Seller], located at [Address], and Party B [Buyer], located at [Address], on [Date].Article 1. Subject of the Contract1.1 Party A agrees to sell and Party B agrees to purchase the following goods:- Quantity: [Number]- Description: [Product Description]- Unit Price: [Price]- Total Price: [Price x Quantity]- Delivery Date: [Date]Article 2. Payment Terms2.1 The total price of the goods shall be paid by Party B to Party A in the following manner:- [Payment Method]- [Payment Schedule]- [Bank Details]Article 3. Delivery Terms3.1 Party A shall deliver the goods to the address specified by Party B on the agreed delivery date.3.2 Party A shall be responsible for the packaging and transportation of the goods to ensure they arrive in good condition.3.3 Party B shall inspect the goods upon delivery and notify Party A of any defects or discrepancies within [Number] days.Article 4. Title and Risk4.1 Title to the goods shall pass to Party B upon full payment of the total price.4.2 The risk of loss or damage to the goods shall pass to Party B upon delivery.Article 5. Warranties5.1 Party A warrants that the goods are free from defects in material and workmanship and conform to the description provided.5.2 Party A shall be responsible for repairing or replacing any defective goods at no additional cost to Party B.Article 6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].Article 7. Dispute Resolution7.1 Any disputes arising from this Contract shall be resolved through negotiation in good faith.7.2 If a resolution cannot be reached, the dispute shall be resolved through arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Party A: ________________________[Signature][Name][Title]Date:Party B: ________________________[Signature][Name][Title]Date:This Sales Contract is hereby accepted and agreed to by both Parties.以上是一份典型的中英文销售合同，包括订购商品、付款条款、交货条件、担保、适用法律等内容。
最新英文销售合同模板5篇
最新英文销售合同模板5篇篇1Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and effective as of the date of signature by and between the Seller and the Buyer, both parties agreeing to the terms and conditions set forth below:Seller:Name of Seller: _____________________Address: ___________________________Contact Information: ________________Buyer:Name of Buyer: _____________________Address: ___________________________Contact Information: ________________I. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following product(s):Product Name: ________________Product Specifications: ________________Quantity: ________________Unit Price: ________________Total Contract Value: ________________II. Terms of Payment1. Payment Term: The total contract value shall be paid in full within ________ (days/weeks/months) from the date of signing this Contract.2. Payment Methods: The Buyer shall make payment through ________________ (specify payment method, e.g., wire transfer, PayPal, etc.).3. Late Payment: In case of late payment by the Buyer, the Seller reserves the right to charge a late payment fee or terminate this Contract.III. Delivery1. Delivery Date: The Seller shall deliver the product to the Buyer on or before ________________ (specify date).2. Delivery Location: The product shall be delivered to the Buyer's designated location: ____________________.3. Shipping Risks: The risk of loss or damage to the product during transportation shall be borne by the Seller until delivered to the Buyer.IV. Quality AssuranceThe Seller guarantees that the product(s) sold shall be in accordance with the specified specifications and free from any defects in material and workmanship. Any defect or discrepancy shall be notified to the Seller in writing within ________ (specify period) from the date of receipt of the product(s).V. ConfidentialityBoth parties shall maintain confidentiality regarding any information related to this Contract that is not intended for public disclosure.VI. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, etc.VII. TerminationThis Contract may be terminated by either party in case of breach by the other party. In such case, the non-breaching party shall be entitled to damages caused by the breach.VIII. Jurisdiction and LawThis Contract shall be governed by and interpreted in accordance with the laws of ________________ (specifycountry/jurisdiction). Any dispute arising out of or in connection with this Contract shall be settled through negotiation. If negotiation fails, the dispute shall be referred to ________________ (specify court/tribunal) for resolution.IX. Miscellaneous1. Any amendment to this Contract must be agreed upon in writing by both parties.2. This Contract constitutes the entire agreement between the Seller and the Buyer and supersedes all prior agreements, oral or written, regarding the subject matter hereof.3. If any provision of this Contract is invalid or unenforceable, such invalidity or unenforceability shall not affect the validity or enforceability of any other provision.4. This Contract is made in English, and any translation provided for reference only. In case of any discrepancies between the English version and any translated version, the English version shall prevail.5. Both parties have read and understood this Contract and agree to be bound by its terms and conditions.6. This Contract is effective as of the date of signature by both parties and shall remain in full force and effect until terminated in accordance with its terms.Signature:Seller: _____________________ Date: ________________Buyer: _____________________ Date: ________________篇2SALES CONTRACTThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").I. PARTIESThe Seller and Buyer hereby agree that the Seller shall sell and the Buyer shall purchase the products listed in Annex A attached hereto, subject to the terms and conditions set out below.II. DESCRIPTION OF GOODSThe goods to be sold are described in Annex A, including, but not limited to, their quantity, quality, specifications, and packaging. The Seller shall ensure that the goods are in accordance with the agreed specifications and are suitable for the intended purpose.III. PRICE AND PAYMENTThe total price for the goods shall be as stated in Annex A. The Buyer shall make payment through the payment methodspecified in Annex B, which is attached hereto and made a part of this Contract. All banking charges and fees shall be borne by the Buyer.IV. DELIVERY AND COMPLETIONThe Seller shall ensure timely delivery of the goods in accordance with the agreed schedule provided in Annex C, which is attached hereto and made a part of this Contract. The Seller shall bear all risks of loss or damage to the goods until they are delivered to the Buyer in accordance with this Contract.V. QUALITY AND ACCEPTANCEThe Seller shall ensure that the goods are of good quality and conform to the agreed specifications. The Buyer shall have the right to inspect the goods during production and upon delivery. If the goods fail to meet the agreed specifications or quality standards, the Buyer shall have the right to reject them and claim compensation from the Seller.VI. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure, including, but not limited to, business secrets, technical information, and pricing structures. Neither party shall disclose such informationto third parties without the prior written consent of the other party.VII. WARRANTIES AND GUARANTEESThe Seller guarantees that the goods are free from defects in material and workmanship and are suitable for the intended purpose. The Seller shall replace or repair any defective goods at its own expense. The Seller also guarantees that it has the legal right to sell the goods and that the sale does not violate any intellectual property rights of third parties.VIII. FORCE MAJEURENeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, fires, wars, riots, strikes, government actions, or other events beyond its reasonable control. The affected party shall notify the other party promptly of any such event and its possible consequences.IX. TERMINATIONThis Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations. The terminating party shall provide written notice to the other party specifying the reasons for termination. Any unfulfilledobligations shall be settled as soon as possible upon termination.X. MISCELLANEOUSThis Contract constitutes the entire agreement between the parties for the sale of the goods and no modifications shall be made unless agreed upon in writing by both parties. This Contract shall be governed by the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation or, if negotiation fails, through arbitration in accordance with the laws of [Country].XI. SIGNATURE AND SEALBoth parties hereby affirm that they have read and fully understand this Contract and agree to its terms and conditions. This Contract shall be signed by authorized representatives of both parties and sealed with official stamps. In witness thereof, both parties have affixed their signatures and seals on this Contract on the day indicated at the beginning of this document.Seller: _____________________ (Signature) _____________________ (Stamp)Buyer: _____________________ (Signature) _____________________ (Stamp)Date: _____________________篇3SALES CONTRACTThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").I. PartiesThe Seller and Buyer agree to the terms and conditions stated below for the sale of the products listed in this contract.II. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the products listed in the attached schedule, which includes product name, specifications, quantity, and unit price.III. Terms of Payment1. Payment Term: Full payment is to be made within XX days of the date of this contract.2. Payment Method: The Buyer shall make payment through [Specify Payment Method] to the Seller's designated account.3. Late Payment: In case of late payment, the Buyer shall paya late fee of XX% per day on the outstanding amount.IV. Delivery and Shipping1. Delivery Date: The Seller shall make delivery of the products within XX days from the date of receipt of the full payment.2. Shipping Method: The products shall be shipped by [Specify Shipping Method] at the Buyer's cost and risk.3. Delivery Delay: If there is any delay in delivery, the Seller shall notify the Buyer promptly and take appropriate measures to rectify the situation.V. Quality Assurance and Warranty1. Quality Assurance: The Seller guarantees that the products comply with the specified quality standards.2. Warranty Period: The Seller shall provide a warranty period of XX months from the date of delivery for any defects in material or workmanship.3. Warranty Service: During the warranty period, the Seller shall, at its own cost, repair or replace defective products, as per the Buyer's request.VI. Contract Modification and Termination1. Contract Modification: Any modification to this contract must be agreed to by both parties in writing.2. Contract Termination: This contract may be terminated by either party giving a written notice to the other party if there is a breach of contract by the other party which is not rectified within a reasonable period.VII. Force MajeureIn case of force majeure events such as natural disasters, war, riots, etc., which prevent or hinder performance of this contract, the affected party shall promptly notify the other party in writing. The affected party shall take appropriate measures to rectify the situation as soon as possible.VIII. General Provisions1. Governing Law: This contract shall be governed by the laws of [Country/State].2. Jurisdiction: Any dispute arising out of or in connection with this contract shall be subject to the jurisdiction of the courts located in [City/Town].3. Entire Agreement: This contract, including all its attachments and amendments, constitutes the entire agreement between the Seller and Buyer and no modification shall be made except in writing, signed by both parties.4. Assignment: Neither party shall assign this contract, in whole or in part, without the prior written consent of the other party.5. Waiver: Any waiver of any breach of this contract must be in writing and signed by both parties to be effective.6. Notice: Any notice required or permitted under this contract shall be given in writing and sent to the addresses specified in this contract or to such other addresses as may be subsequently notified by either party to the other party in writing.7. Severability: If any provision of this contract is held invalid or unenforceable under applicable law, such invalidity or unenforceability shall not affect the validity or enforceability ofany other provision hereof unless otherwise specified hereinabove.IX. Additional Clauses (if any) [These clauses are specific to parties' requirements and are left blank for further filling.]The parties hereby confirm that they have read and fully understand this contract and agree to its terms and conditions.For the Seller:[Seller's Full Name]Date: _____________________Signature: _____________________For the Buyer:[Buyer's Full Name]Date: _____________________Signature: _____________________ 契约完此文档仅作为示例参考模板，请根据实际需要修改。
英文销售合同模板5篇
英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。
英文版销售合同范本8篇
英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。
英文版销售合同样本5篇
英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。
英文销售合同模板3篇
英文销售合同模板3篇篇1Sales ContractThis Sales Contract is entered into on [Date] by and between [Seller], with an address at [Seller’s Address] (hereinafter referred to as "Seller"), and [Buyer], with an address at [Buyer’s Address] (hereinafter referred to as "Buyer").1. Sale of Goods: Seller agrees to sell, transfer, and deliver to Buyer the goods described as [Description of Goods] (the "Goods").2. Purchase Price: The total purchase price for the Goods shall be [Purchase Price] payable by Buyer to Seller in [Amount] installments as follows: [Payment Schedule].3. Payment Terms: Buyer shall make payment to Seller in the manner specified in this Agreement. If Buyer fails to make any payment when due, Seller may, at its option, declare the entire balance due and payable. Buyer shall pay all costs and expenses reasonably incurred by Seller in collecting any amounts due under this Agreement.4. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Buyer shall inspect the Goods immediately upon receipt and shall notify Seller in writing of any non-conformity within [Number] days of delivery.5. Warranties: Seller represents and warrants that the Goods are free from defects in material and workmanship and conform to the specifications set forth in this Agreement. Seller makes no other warranties, express or implied.6. Limitation of Liability: Seller's liability under this Agreement is limited to the Purchase Price paid by Buyer. Seller shall not be liable for any incidental, consequential, or punitive damages.7. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [State/Country].8. Entire Agreement: This Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof. Any modifications or amendments must be in writing and signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: __________________________Buyer: __________________________Date: __________________________Signature: __________________________Signature: __________________________This Sales Contract is hereby accepted by Buyer and Seller.Date: __________________________Signature: __________________________Signature: __________________________[Seal]篇2Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], with a principal place of business at [Address] (the "Seller"), and [Buyer], with a principal place of business at [Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods") in a quantity and at a price agreed upon by the parties.2. Purchase Price. The purchase price of the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount], payable by [Payment Method] upon delivery of the Goods to Buyer.3. Delivery. Seller agrees to deliver the Goods to Buyer at [Delivery Location] on or before [Delivery Date]. Buyer shall be responsible for all costs associated with shipping and delivery of the Goods.4. Inspection and Acceptance. Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify Seller of any defects or nonconformities. If Buyer does not give Seller notice of any defects within this time frame, the Goods shall be deemed accepted.5. Warranties. Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Seller's liability under this warranty shall be limited to the replacement of any defective Goods.6. Limitation of Liability. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING TO THIS CONTRACT, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR OTHERWISE.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: ____________________________Buyer: ____________________________Exhibit ADescription of Goods:[Description]Signed and agreed to as of [Date] by:Seller: ____________________________Buyer: ____________________________以上是关于销售合同的英文模板，欢迎根据实际情况进行修改和调整。
销售合同英文范本5篇
销售合同英文范本5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date] between [Seller Name], with a registered address at [Seller Address], and [Buyer Name], with a registered address at [Buyer Address] (collectively referred to as the "Parties").1. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods (the "Goods"):- Description of goods:- Quantity:- Price:2. DeliveryThe Seller shall deliver the Goods to the Buyer at the following address: [Delivery Address]. The Goods shall be delivered on or before [Delivery Date].3. PaymentThe Buyer shall pay the Seller the total sum of [Total Amount] for the Goods. The payment shall be made in [Currency] in the following manner:- [Deposit amount] shall be paid upon signing this Contract.- The balance amount shall be paid upon delivery of the Goods.4. Inspection and AcceptanceUpon delivery of the Goods, the Buyer shall inspect the Goods and shall have [Number of Days] days to notify the Seller of any defects or non-conformity. If no notification is made within this period, the Goods shall be deemed accepted by the Buyer.5. WarrantyThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.SELLER BUYER[Signature] [Signature][Print Name] [Print Name]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's Contact Number]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's Contact Number]The Seller and the Buyer shall collectively be referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and deliver the following goods:Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Unit Price of Goods]Total Price: [Total Price of Goods]2. DeliveryThe Seller shall deliver the goods to the Buyer at the following address:Delivery Address: [Delivery Address]Delivery Date: [Delivery Date]3. PaymentThe Buyer shall pay the total price of the goods as follows:- [Payment Method(s)]- [Payment Schedule]- [Total Payment Amount]4. Inspection and AcceptanceThe Buyer shall inspect the goods upon delivery. If the goods are found to be damaged or defective, the Buyer shall notify theSeller within [Number of Days] days of delivery. The Seller shall replace or repair the goods at no additional cost to the Buyer.5. Risk of LossThe risk of loss shall pass to the Buyer upon delivery of the goods to the Buyer's address.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller: [Seller's Signature]Buyer: [Buyer's Signature][Date]篇3Sales Contract TemplateThis Sales Contract is entered into on [date], between [Seller's Name], hereinafter referred to as the "Seller", and [Buyer's Name], hereinafter referred to as the "Buyer".1. Description of GoodsThe Seller agrees to sell to the Buyer the following goods:- Description of goods- Quantity- Price per unit2. DeliveryThe Seller agrees to deliver the goods to the Buyer's specified location on [date]. The Buyer agrees to accept the delivery of the goods according to the terms specified in this contract.3. Price and PaymentThe total price of the goods is [total price]. The Buyer agrees to make payment in full to the Seller by [payment method] on or before the delivery date.4. Inspection and AcceptanceThe Buyer has the right to inspect the goods upon delivery. If the goods do not meet the specifications outlined in this contract, the Buyer has the right to reject the goods and request a refund.5. WarrantyThe Seller warrants that the goods are free from defects in materials and workmanship for a period of [warranty period]. If any defects are discovered during this period, the Seller agrees to repair or replace the goods at no additional cost to the Buyer.6. Limitation of LiabilityThe Seller shall not be liable for any damages resulting from the use or misuse of the goods by the Buyer.7. Governing LawThis contract shall be governed by the laws of[State/Country].8. Entire AgreementThis contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings between the parties.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.Seller: [Seller's Signature]Buyer: [Buyer's Signature]篇4Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address], collectively referred to as the "Parties."1. Sale of Goods1.1 Seller agrees to sell, transfer, and deliver to Buyer the following goods: [Description of Goods] in the quantities and at the prices as described in Exhibit A attached hereto.1.2 Buyer agrees to accept and pay for the goods according to the terms and conditions set forth in this Contract.2. Price and Payment2.1 The total purchase price of the goods shall be [Amount], payable in [currency], in accordance with the payment terms set forth in Exhibit A.2.2 Payment shall be made by [method of payment], with the first installment due on [Date] and subsequent installments due on a [frequency] basis thereafter.3. Delivery3.1 Seller shall deliver the goods to Buyer's premises at [Address] on or before [Date].3.2 If Seller fails to deliver the goods by the agreed-upon delivery date, Buyer may, at its option, cancel the order and receive a full refund of any amounts paid.4. Risk of Loss4.1 The risk of loss of the goods shall pass to Buyer upon delivery of the goods to Buyer's premises.5. Inspection and Acceptance5.1 Buyer shall inspect the goods upon delivery and shall have [number] days to notify Seller in writing of any defects or nonconformities. Failure to provide notice within this timeframe shall constitute acceptance of the goods.5.2 If the goods are found to be defective or nonconforming, Seller shall have the option to repair or replace the goods at no additional cost to Buyer.6. Warranties6.1 Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to any specifications provided by Buyer.6.2 Seller makes no other warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.7. Termination7.1 Either Party may terminate this Contract upon written notice if the other Party fails to perform its obligations under the Contract and such failure continues for a period of [number] days after written notice of the breach.8. Governing Law8.1 This Contract shall be governed by and construed in accordance with the laws of the State of [State].IN WITNESS WHEREOF, the Parties have executed this Sales Contract as of the Effective Date.[Signature of Seller] [Signature of Buyer]__________________________ __________________________[Seller Name] [Buyer Name]Date: ____________________ Date: ____________________篇5Sales ContractThis Sales Contract is entered into on [insert date] by and between [Seller’s Company Name], located at [Seller’s Address], and [Buyer’s Company Name], located at [Buyer’s Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods:– [Description of goods]– Quantity: [Number of units or volume]– Price: [Price per unit or total amount]2. Delivery: The goods will be delivered to Buyer at the address provided by Buyer on or before the agreed-upon delivery date of [insert date]. Delivery will be made by [Seller’spreferred shipping method]. Any additional costs incurred for expedited delivery will be borne by Buyer.3. Payment Terms: Buyer agrees to pay the total amount of [insert total amount] within [number] days of receiving the goods. Payments will be made in [currency] to [Seller’s preferred payment method], unless otherwise agreed upon by both parties.4. Inspection of Goods: Buyer has [number of days] from the date of delivery to inspect the goods. If the goods are found to be defective or not as described, Buyer must notify Seller in writing within this inspection period. Seller will either replace the goods or refund Buyer’s payment.5. Warranty: Seller warrants that the goods are free of defects in material and workmanship and will conform to the specifications agreed upon by both parties. Seller’s liability under this warranty is limited to the replacement or repair of defective goods.6. Governing Law: This Sales Contract shall be governed by the laws of [State/Country] and any disputes arising from the contract shall be resolved in the courts of [State/Country].7. Entire Agreement: This Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of goods and supersedes any previous agreements or understandings, whether written or oral.In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________Signed and sealed in the presence of:Witness: _______________________Date: _______________________This Sales Contract is effective as of the date first above written and shall remain in effect until all obligations under the contract have been fulfilled by both parties.。
国际英文销售合同6篇
国际英文销售合同6篇篇1International Sales ContractThis International Sales Contract ("Contract") is made and entered into on [Date] ("Effective Date") by and between:Seller: [Seller's Name] with its principal place of business at [Seller's Address]Buyer: [Buyer's Name] with its principal place of business at [Buyer's Address]The Seller and Buyer are collectively referred to as the "Parties."WHEREAS, the Seller is engaged in the business of selling [Products/Services]; andWHEREAS, the Buyer desires to purchase [Products/Services] from the Seller.NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the Parties agree as follows:1. Sale of Products/Services:1.1. The Seller agrees to sell, transfer, and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, [Products/Services] in accordance with the terms and conditions set forth in this Contract.2. Price and Payment:2.1. The price of the [Products/Services] shall be [Price], payable in [Currency], in [Payment Terms].2.2. Payment shall be made in [Payment Method] to the Seller within [Number] days from the date of the invoice.3. Delivery:3.1. The Seller shall deliver the [Products/Services] to the Buyer at [Delivery Address] on or before the delivery date specified in the Contract.3.2. The Seller shall be responsible for all shipping and handling costs associated with the delivery of the [Products/Services].4. Warranties:4.1. The Seller warrants that the [Products/Services] shall conform to the specifications agreed upon by the Parties and shall be free from defects in materials and workmanship.4.2. The Seller further warrants that it has the right to sell the [Products/Services] to the Buyer and that the [Products/Services] do not infringe upon any intellectual property rights of third parties.5. Liability:5.1. The Seller shall not be liable for any indirect, incidental, or consequential damages arising from the sale of the [Products/Services].5.2. The maximum liability of the Seller under this Contract shall not exceed the total purchase price of the[Products/Services].6. Governing Law:6.1. This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].6.2. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the Effective Date.SELLER:_____________________________[Seller's Name]_____________________________[Seller's Title]BUYER:_____________________________[Buyer's Name]_____________________________[Buyer's Title]篇2International English Sales ContractThis International Sales Contract (hereinafter referred to as “Contract”) is made and entered into on [Date] by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as "Buyer").Whereas, Seller desires to sell the goods specified in Schedule A (hereinafter referred to as "Goods") to Buyer, and Buyer desires to purchase the Goods.Now, therefore, in consideration of the premises and mutual covenants contained herein, the parties hereto agree as follows:1. Seller agrees to sell and Buyer agrees to purchase the Goods in accordance with the terms and conditions set forth in this Contract.2. Price and Payment2.1 The price of the Goods shall be [Amount] per unit. The total purchase price for the Goods shall be [Total Amount].2.2 The payment shall be made by [Payment Method], in [Currency], within [Number] days after the delivery of the Goods.3. Delivery3.1 The Goods shall be delivered by Seller to Buyer at [Delivery Location] on or before [Delivery Date].3.2 The risk of loss and damage to the Goods shall pass from Seller to Buyer upon delivery.4. Inspection and Acceptance4.1 Buyer shall inspect the Goods upon delivery and shall notify Seller in writing of any non-conformities or defects within [Number] days.4.2 Buyer shall be deemed to have accepted the Goods if no notice of non-conformities or defects is given within the specified time.5. Warranties5.1 Seller warrants that the Goods shall conform to the specifications set forth in Schedule A.5.2 Buyer’s sole remedy for any breach of warranty shall be the replacement of the non-conforming Goods or a refund of the purchase price.6. Governing Law and Dispute Resolution6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties.6.3 If the dispute cannot be resolved amicably, it shall be submitted to arbitration in accordance with the rules of [Arbitration Institution].7. Miscellaneous7.1 This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral.7.2 This Contract may be amended or modified only in writing signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]________________________________[Buyer]________________________________Schedule A – List of Goods[Description of Goods][Quantity][Price per unit]篇3International English Sales ContractThis International English Sales Contract ("Contract") is made and entered into on this ___________ day of __________, 20__, by and between:The Seller:Name: [Seller’s Name]Address: [Seller’s Address]Email: [Seller’s Email Address]Phone: [Seller’s Contact Number]And The Buyer:Name: [Buyer’s Name]Address: [Buyer’s Address]Email: [Buyer’s Email Address]Phone: [Buyer’s Contact Number]The Seller and the Buyer, hereinafter referred to as the “Parties”, agree to the following terms and conditions:1. Product Details:The Seller agrees to sell and deliver the following products to the Buyer:- Description of Products: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Delivery Date]2. Payment Terms:The Buyer agrees to pay the Seller the total amount of [Total Amount] for the products as stated above. Payment must be made in [Currency] through [Payment Method] within [Number] days of signing this Contract.3. Delivery:The Seller shall deliver the products to the Buyer on or before the agreed Delivery Date. The Buyer shall bear all costs associated with the delivery of the products.4. Quality Assurance:The Seller guarantees that the products delivered shall meet the quality standards as specified in this Contract. If the productsdo not meet the quality standards, the Buyer has the right to reject the products and request a replacement or refund.5. Title and Risk of Loss:Title and risk of loss for the products shall transfer from the Seller to the Buyer upon delivery of the products to the Buyer.6. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution:Any dispute arising out of or in connection with this Contract shall be resolved through amicable negotiations between the Parties. If a resolution cannot be reached, the dispute shall be referred to arbitration in [City], [Country] in accordance with the rules of [Arbitration Institution].8. Confidentiality:The Parties agree to keep all information disclosed under this Contract confidential and not disclose it to any third party without the other Party’s consent.9. Entire Agreement:This Contract constitutes the entire agreement between the Parties concerning the sale and purchase of the products and supersedes all prior agreements and understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract as of the date first above written.Seller: __________________________________Buyer: __________________________________Signature: ________________________________Signature: ________________________________Print Name: _______________________________Print Name: _______________________________This International English Sales Contract is hereby accepted and agreed upon by the Parties as of the date first written above.【Please note that this is a sample International English Sales Contract. It is recommended to seek legal advice when drafting a sales contract for your specific needs with a professional attorney or legal advisor】.篇4International English Sales ContractThis International Sales Contract ("Contract") is entered into on [Date] between [Seller], with its principal place of business at [Address] and [Buyer], with its principal place of business at [Address].Article 1: Subject MatterThe subject matter of this Contract is the sale of [Product/Service] by the Seller to the Buyer. The specifications of the Product/Service are detailed in Exhibit A attached hereto.Article 2: Purchase PriceThe purchase price for the Product/Service shall be [Amount] to be paid by the Buyer to the Seller in [Currency]. The payment terms are detailed in Exhibit B attached hereto.Article 3: DeliveryThe Seller shall deliver the Product/Service to the Buyer at [Delivery Location] by [Delivery Date]. The delivery terms and conditions are detailed in Exhibit C attached hereto.Article 4: Inspection and AcceptanceUpon delivery of the Product/Service, the Buyer shall have [Number] days to inspect and test the Product/Service. If theBuyer finds any defects or non-conformities, the Buyer shall notify the Seller in writing within the inspection period.Article 5: WarrantiesThe Seller warrants that the Product/Service shall conform to the specifications set forth in Exhibit A. The Seller further warrants that the Product/Service is free from defects in materials and workmanship.Article 6: Limitation of LiabilityThe Seller's liability under this Contract shall be limited to the purchase price of the Product/Service. The Seller shall not be liable for any indirect, special, or consequential damages.Article 7: Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any dispute arising out of or in connection with this Contract shall be resolved through arbitration in [Arbitration Location].In witness whereof, the parties hereto have executed this Contract as of the date first written above.[Seller]By:______________________Title:____________________Date:____________________[Buyer]By:______________________Title:____________________Date:____________________Exhibit A: Product/Service SpecificationsExhibit B: Payment TermsExhibit C: Delivery Terms and Conditions篇5International English Sales ContractThis International English Sales Contract ("Contract") is entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as the "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (hereinafter referred to as the "Buyer").WHEREAS, Seller is engaged in the business of manufacturing and distributing [Products] and Buyer desires to purchase [Products] from Seller; andWHEREAS, Seller and Buyer desire to enter into a contract setting forth the terms and conditions of the sale of [Products];NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Product Description: Seller agrees to sell and Buyer agrees to purchase the following products: [Description of Products]. The quantity, quality, and price of the products shall be as set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Price and Payment: The price of the products shall be as specified in Exhibit A. Payment shall be made in [Currency] within [Number] days of the date of the invoice.3. Delivery: Seller shall deliver the products to Buyer at the location specified in Exhibit A. Delivery shall be made within [Number] days of receipt of payment.4. Inspection and Acceptance: Buyer shall have [Number] days from the date of delivery to inspect the products and notifySeller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, the products shall be deemed accepted.5. Warranty: Seller warrants that the products shall conform to the specifications set forth in Exhibit A. Seller further warrants that the products shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery.6. Indemnification: Seller agrees to indemnify, defend, and hold harmless Buyer from and against any and all claims, damages, losses, liabilities, and expenses arising out of any breach of this Contract by Seller.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the products and supersedes all prior agreements, understandings, and representations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Exhibit A - Product Description and Terms[Detailed description of products, quantity, quality, price, delivery terms, etc.]篇6International English Sales ContractThis International Sales Contract (the "Contract") is made and entered into on this ___ day of ___, 20__, by and between___________ (the "Seller"), a company organized and existing under the laws of ___________ with its principal place of business located at ___________ and ___________ (the "Buyer"), a company organized and existing under the laws of ___________ with its principal place of business located at ___________.WHEREAS, the Seller desires to sell and the Buyer desires to purchase certain goods (the "Goods") in accordance with the terms and conditions set forth in this Contract; andWHEREAS, the Seller and the Buyer intend to create a legally binding agreement regarding the sale and purchase of the Goods;NOW, THEREFORE, in consideration of the mutual covenants and conditions contained in this Contract, the parties agree as follows:1. Subject MatterThe Seller agrees to sell and the Buyer agrees to purchase the Goods in accordance with the terms and conditions set forth in this Contract.2. Purchase PriceThe Purchase Price for the Goods shall be ___________ per unit, payable in ___________ according to the payment terms set forth in this Contract.3. DeliveryThe Goods shall be delivered to the Buyer at ___________ by ___________ (the "Delivery Date"). The Seller shall bear all shipping costs and risks of loss or damage to the Goods until they are delivered to the Buyer.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the Goods upon delivery and shall have ___________ days from the delivery date to notify the Seller of any defects or non-conformities. Failure togive notice within this time frame shall constitute acceptance of the Goods.5. WarrantiesThe Seller warrants that the Goods shall conform to the specifications and descriptions provided by the Seller and shall be free from defects in material and workmanship.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of ___________. Any disputes arising under this Contract shall be resolved through arbitration in___________.IN WITNESS WHEREOF, the parties hereto have executed this International Sales Contract as of the date first above written.Seller:_________________________Buyer:_________________________。
外贸销售合同样本中英文6篇
外贸销售合同样本中英文6篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal office located at [Address] (the "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal office located at [Address] (the "Buyer").1. Subject of the ContractSeller agrees to sell and Buyer agrees to purchase the following products (the "Products"):Description of Products:- Quantity:- Price:- Delivery terms:- Payment terms:2. DeliveryThe Seller agrees to deliver the Products to the Buyer at the agreed-upon location on the date specified in the Contract. The Buyer agrees to accept delivery of the Products at the specified location and time.3. AcceptanceUpon delivery of the Products, the Buyer shall inspect the Products to ensure they conform to the specifications agreed upon in the Contract. If the Products do not meet theagreed-upon specifications, the Buyer may reject the Products and the Seller shall replace them with conforming Products at no additional cost to the Buyer.4. Payment TermsThe Buyer agrees to pay the Seller the total amount due for the Products in accordance with the payment terms specified in the Contract. Payment shall be made in [Currency] to the Seller's designated bank account.5. TerminationEither party may terminate this Contract in the event of a material breach by the other party. Notice of termination must be provided in writing and shall be effective upon receipt.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [City], [Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: ________________________[Buyer]By: ________________________篇2International Sales ContractThis International Sales Contract ("Contract") is made and entered into on [Date] by and between:Seller: [Seller Name]Address: [Address]Country: [Country]Telephone: [Telephone]Email: [Email]Buyer: [Buyer Name]Address: [Address]Country: [Country]Telephone: [Telephone]Email: [Email]Both the Buyer and Seller hereby agree to the following terms and conditions:1. Goods: Seller agrees to sell, and Buyer agrees to buy the following goods:Description: [Description of Goods]Quantity: [Quantity]Price: [Price]2. Payment: The total amount payable by the Buyer to the Seller shall be paid as follows:- [Payment Terms]3. Delivery: The goods shall be delivered to the Buyer at the following address:[Delivery Address]Delivery Date: [Delivery Date]4. Inspection: The Buyer shall have the right to inspect the goods upon delivery. Any defects or discrepancies in the goods must be reported to the Seller within [Number] days of delivery.5. Warranty: The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery.6. Force Majeure: Neither party shall be held liable for any failure to perform its obligations under this Contract if such failure is due to causes beyond its control, including but not limited to acts of God, war, riots, strikes, or natural disasters.7. Governing Law: This Contract shall be governed by the laws of [Country].8. Dispute Resolution: Any disputes arising from this Contract shall be resolved through arbitration in accordance with the rules of [Arbitration Organization].This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings. This Contract may only be amended in writing and signed by both parties.In witness whereof, the parties hereto have executed this Contract as of the date first written above.Seller:Signature: _____________________Date: _____________________Buyer:Signature: _____________________Date: _____________________篇3Sales ContractThis Sales Contract (“Contract”) is entered into by and between Party A, a company incorporated in [Country] with a registered address at [Address] (“Seller”), and Party B, a company incorporated in [Country] with a registered address at [Address] (“Buyer”), collectively referred to as the “Parties”.1. Subject of the Contract1.1 The Seller agrees to sell and the Buyer agrees to purchase the products specified in Annex A attached hereto (the “Products”).1.2 The quantity, quality, specifications, and price of the Products shall be as set forth in Annex A.2. Payment Terms2.1 The Buyer shall make payment to the Seller in the currency specified in Annex A within [number] days of receipt of the Products.2.2 Any bank charges incurred in connection with the payment shall be borne by the Buyer.3. Delivery3.1 The Seller shall deliver the Products to the Buyer’s designated location as specified in Annex A.3.2 The delivery shall be made within [number] days after receipt of the payment.4. Quality Assurance4.1 The Seller warrants that the Products shall conform to the quality and specifications as set forth in Annex A.4.2 The Buyer shall have the right to inspect the Products upon delivery and shall notify the Seller of any defects ornon-conformities within [number] days of delivery.5. Force Majeure5.1 Neither Party shall be liable for any delay or failure to perform its obligations under this Contract due to force majeure events.5.2 If a force majeure event occurs, the affected Party shall promptly notify the other Party in writing and make all reasonable efforts to mitigate the impact of the event.6. Governing Law and Dispute Resolution6.1 This Contract shall be governed by the laws of [Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved through amicable negotiation between the Parties.7. Entire Agreement7.1 This Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Products and supersedes all prior agreements, understandings, and representations, whether oral or written.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________ Date: ________________Buyer: _______________________ Date: ________________篇4International Sales AgreementThis International Sales Agreement ("Agreement") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].1. Product Description:Seller agrees to sell and Buyer agrees to purchase the following goods (the "Products"): [Description of Products], in the quantities and at the prices set forth in Exhibit A attached hereto.2. Delivery:The Products shall be delivered to [Buyer's Address] within [Number] days after the receipt of the purchase order. Seller shall use its best efforts to ensure that the Products are delivered within the specified timeframe.3. Payment:Buyer shall pay Seller for the Products as set forth in Exhibit A. Payment shall be made in [Currency] within [Number] days from the date of delivery.4. Warranty:Seller warrants that the Products shall conform to the specifications set forth in Exhibit B and shall be free from defects in material and workmanship. In the event that the Products do not conform to the specifications, Buyer may return the Products within [Number] days of delivery for a full refund.5. Governing Law:This Agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Agreement shall be resolved through arbitration in [City], [Country].6. Entire Agreement:This Agreement contains the entire understanding of the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.In witness whereof, the parties hereto have executed this Agreement as of the date first above written.Seller:[Signature]Buyer:[Signature]Exhibit A - PricingExhibit B - Specifications篇5International Sales ContractSeller: XXX CompanyAddress: XXX Street, XXX City, CountryContact: Mr. XXXEmail:***********Telephone: +xxx-xxx-xxxBuyer: XXX CompanyAddress: XXX Avenue, XXX City, CountryContact: Ms. XXXEmail:***********Telephone: +xxx-xxx-xxxDate: XXXThis agreement is made between XXX Company, the seller, and XXX Company, the buyer, on the date mentioned above.1. CommodityThe seller agrees to sell and the buyer agrees to purchase the following commodity:- Description: XXX- Quantity: XXX- Price: $XXX per unit- Total Amount: $XXX2. Payment TermsThe buyer shall pay the total amount in full to the seller within XXX days upon the signing of this contract. Payment shall be made in the currency of XXX to the seller's designated bank account.3. Delivery TermsThe seller shall deliver the goods to the buyer's designated location within XXX days upon receiving the payment. The buyer shall bear all costs associated with the transportation and insurance of the goods.4. Quality AssuranceThe seller guarantees that the goods delivered shall meet the quality and specifications as stated in this contract. In case of any defects or damages, the buyer shall have the right to return the goods and receive a full refund.5. Force MajeureNeither party shall be liable for any failure or delay in performing its obligations under this contract due to circumstances beyond its control, such as acts of God, natural disasters, or government actions.6. Governing LawThis contract shall be governed by and construed in accordance with the laws of XXX. Any disputes arising from this contract shall be settled through amicable negotiations between the parties.Signed and agreed by:Seller: XXX CompanyBuyer: XXX CompanyWitness: ____________________Date: XXXThis sales contract represents the entire agreement between the seller and the buyer and supersedes all prior discussions and negotiations. This contract shall come into effect upon signing by both parties.篇6Foreign Trade Sales ContractParty A: [Seller's Name]Party B: [Buyer's Name]This contract is entered into by Party A and Party B on this [date] day of [month], [year], in accordance with the laws of [country].Article 1: CommodityParty A agrees to sell and Party B agrees to buy the following commodity: [description of the commodity, including quantity, quality, specifications, and price].Article 2: PriceThe total price of the commodity is [amount] and will be paid by Party B to Party A in the following manner: [payment terms, including the currency and method of payment].Article 3: DeliveryThe commodity will be delivered by Party A to Party B at the following address: [delivery address]. The delivery will be made on or before [specified date].Article 4: InspectionParty B has the right to inspect the commodity upon delivery and reject any goods that do not meet the specified quality requirements. Party A will be responsible for replacing any rejected goods.Article 5: WarrantyParty A warrants that the commodity is free from defects and conforms to the specifications listed in this contract. Party A will be liable for any damages caused by defective goods.Article 6: Force MajeureIf either party is unable to perform its obligations under this contract due to force majeure events such as natural disasters or political unrest, the affected party will be excused from its obligations for the duration of the force majeure event.Article 7: Dispute ResolutionAny disputes arising from this contract will be resolved through negotiation between the parties. If a resolution cannot be reached, the parties agree to submit the dispute to arbitration in accordance with the laws of [country].This contract is made in duplicate, with each party retaining one original copy.Party A: [Signature]Date: [Date]Party B: [Signature]Date: [Date]。
英文购销合同范本6篇
英文购销合同范本6篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree as follows:II. Products and SpecificationsThe products to be purchased and sold under this Contract are as follows: ______________ (Please specify the products, specifications, quantity, unit price, total value, etc.)III. Terms of DeliveryThe Seller shall deliver the products to the port/place specified below: ______________ (Delivery location). The mode of transportation, the date of shipment, and the port/place of receipt shall be agreed upon by both parties.IV. Terms of PaymentThe payment terms under this Contract shall be as follows: ______________ (Payment terms such as advance payment, terms of payment, documents required for payment, etc.).V. Quality Inspection and Warranty PeriodThe Seller shall ensure that the products are in conformity with the quality standards specified in this Contract. The warranty period shall be _______________ (Warranty period). During the warranty period, if any defects are found in the products, the Seller shall be responsible for repairing or replacing them at its own cost.VI. Risks and Penalties for Late Delivery or Non-DeliveryIf the Seller fails to make delivery of the products on time or delivers wrong specifications, it shall be responsible for any loss incurred to the Buyer. If the Seller cannot make delivery due to force majeure circumstances, it shall immediately notify the Buyer in writing and take proper measures to minimize the lossof both parties. The risks and penalties for late delivery ornon-delivery shall be agreed upon by both parties.VII. Confidentiality and Intellectual Property RightsVIII. Settlement of DisputesIX. General Clauses1) Force Majeure: Neither party shall be held responsible for failure or delay in performance of its obligations under this Contract due to force majeure causes such as natural disasters, government intervention or other unforeseeable circumstances beyond its control. If such circumstances occur, both parties shall endeavor to resume performance under this Contract as soon as possible after removal of such causes or upon receipt of advice from each other through diplomatic channels.篇2PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: ________________ (Name of Buyer)Seller: ________________ (Name of Seller)WHEREAS the Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. Commodities: ________________ (The specific commodity or products to be purchased and sold, including name, specifications, quantity, etc.)II. Price: ________________ (The agreed price for the commodity, including total price, unit price, currency, payment terms, etc.)III. Quality and Quantity: ________________ (The quality standards, inspection methods, and any applicable tolerance levels for the commodity. The quantity to be delivered by the Seller and accepted by the Buyer.)IV. Delivery:a. Place of Delivery: ________________ (The place where the commodity shall be delivered.)b. Time of Delivery: ________________ (The date or period in which the delivery should be completed.)c. Risks and Expenses: ________________ (The risks and expenses related to delivery such as transportation, insurance, customs clearance, etc.)d. Delay in Delivery: Penalty for delay in delivery if any shall be as per the agreed terms.e. Any other specific conditions related to delivery.V. Payment:a. Terms of Payment: ________________ (The payment terms agreed upon by both parties, such as advance payment, payment on delivery, payment terms in letters of credit, etc.)b. Time of Payment: ________________ (The date or period in which the payment should be made.)c. Late Payment Penalty: Penalty for late payment if any shall be as per the agreed terms.d. Any other specific conditions related to payment.VI. Inspection and Acceptance: ________________ (The inspection procedures, acceptance criteria, and any other related conditions for the commodity.)VII. Claims: ________________ (The procedures and conditions for claims in case of damage or loss of the commodity during transportation or other relevant matters.)VIII. Force Majeure: Both parties shall be entitled to claim compensation for any losses incurred due to force majeure events such as natural disasters, wars, riots, etc., which are beyond their control. The responsibilities of both parties shall be suspended during such events.IX. Confidentiality: Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure unless mutually agreed or required by law.X. Warranty and Guarantee: The Seller shall provide warranty and guarantee for the quality and performance of the commodity as per the agreed terms and conditions. Any defects or non-performance should be rectified by the Seller as per the warranty terms.XI. Termination: The Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide notice to the other party and specify the reasons for termination. The provisions related to claims, confidentiality, warranty andguarantee shall remain valid even after termination of this Contract.In witness whereof, the parties have executed this Contract in ________________ (Place) on the ________________ (Date).Buyer: _____________________ (Signature of Buyer) Title:_____________________ (Title of Buyer) Date: _________________ (Date of Signature)篇3PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:I. Contracting PartiesSeller: ___________________________ (Name of Seller)Address: _________________________ (Address of Seller)Buyer: ___________________________ (Name of Buyer)Address: _________________________ (Address of Buyer)II. Product DescriptionProduct Name: _________________________ (Product Name)Product Code: _________________________ (Product Code)Quantity: _________________________ (Quantity)Specification: _________________________ (Product specifications, including size, color, quality, etc.)Unit Price: _________________________ (Unit Price)Total Price: _________________________ (Total Price)III. Terms of PaymentThe Buyer shall make payment through ________________ (Payment method, e.g., wire transfer, letter of credit, etc.) in full before the delivery date specified in Clause IV.IV. Delivery TermsThe Seller shall ensure delivery of the products to the Buyer's designated location on or before ________________ (Delivery Date). Any delay in delivery shall be notified to the Buyer in advance.V. Quality AssuranceThe Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications andstandards. The Seller shall be responsible for any defects in material or workmanship.VI. Packaging and ShippingThe Seller shall properly pack and secure the products for shipment to ensure their safe arrival at the Buyer's designated location. The costs of packaging and shipping shall be borne by the Seller.VII. Risk and Title TransferRisk of loss or damage to the products shall be transferred to the Buyer upon delivery at the agreed location. Title to the products shall be transferred upon full payment by the Buyer.VIII. Confidentiality and Non-DisclosureBoth parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business practices. Neither party shall disclose such information to third parties without the other party's consent.IX. Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________________ (Warranty Period) for the products. During this period, the Seller shall repair or replace any defective products at its own cost. TheSeller shall also provide necessary after-sales service support as agreed by both parties.X. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, war, riots, etc. The affected party shall notify the other party promptly and provide reasonable evidence to prove the occurrence of such event.XI. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________________ (Dispute Resolution Mechanism, e.g., court, arbitration, etc.) for resolution.XII. Miscellaneous Provisions1. This Contract is made in ________________ (Language) and is binding upon both parties. Any amendments or modifications to this Contract must be made in writing and agreed upon by both parties.2. This Contract constitutes the entire agreement between the parties on the subject matter hereof and supersedes all prioragreements, understandings, and communications, whether oral or written.3. The invalidity or unenforceability of any provision of this Contract shall not affect the validity or enforceability of any other provision hereof.4. The laws of ________________ (Country/Jurisdiction) shall apply to this Contract. The courts of ________________ (Country/Jurisdiction) shall have jurisdiction over any disputes arising out of or in connection with this Contract.5. The Buyer may assign this Contract without the prior written consent of the Seller. The Seller may not assign this Contract without the prior written consent of the Buyer. However, either party may assign this Contract to a third party as part of a corporate reorganization or change of control transaction without obtaining prior consent from the other party if such assignment does not materially change the obligations of either party under this Contract.篇4PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:Seller: _________________________ (Name of Seller)Buyer: _________________________ (Name of Buyer)I. Contract Article and Quantity:The Seller agrees to sell and the Buyer agrees to purchase the following goods: (Insert details of the goods, including name, quantity, specifications, etc.)II. Price and Payment:The total contract price shall be ________ (Insert contract price). The payment terms are as follows:a. Deposit: The Buyer shall pay a deposit of ________ (Insert deposit amount) upon signing this Contract.b. Balance Payment: The balance payment shall be made within ________ (Insert payment period) after the delivery of the goods.c. Payment Method: The payment shall be made through________ (Insert payment method, e.g., bank transfer, T/T, etc.)III. Delivery and Shipment:a. Delivery Time: The Seller shall deliver the goods within________ (Insert delivery time) from the date of signing this Contract.b. Shipping Method: The goods shall be shipped by ________ (Insert shipping method, e.g., air, sea, land, etc.) at the Buyer's option.c. Place of Delivery: The place of delivery shall be ________ (Insert place of delivery).d. Risk Transfer: Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the place of destination specified in this Contract.IV. Quality and Inspection:a. Quality Standards: The goods shall be in accordance with the quality standards specified in this Contract.b. Inspection: The Buyer shall have the right to inspect the goods during production and prior to shipment. The Seller shall provide necessary assistance and facilitate such inspections.c. Quality Claim: If any claim is made by the Buyer regarding quality issues, such claim shall be made within ________ (Inserttime limit) after arrival of the goods at the port of destination. The Seller shall promptly address any quality issues raised by the Buyer in accordance with this Contract.V. Packaging and Marks:The Seller shall provide suitable packaging for the goods and ensure that all necessary marks and labels are affixed on each package, including name of goods, quantity, weight, measurements, gross weight, destination address, etc. All packaging must be suitable for long-distance transportation and must withstand normal conditions during transportation and handling without damage to or loss of the contents.VI. Claims and Penalties:a. If any claim is made by the Buyer due to late delivery or any other breach by the Seller, such claim shall be made in writing within ________ (Insert time limit) from the date of arrival of the goods at the port of destination. The Seller shall promptly address any claims raised by the Buyer in accordance with this Contract.b. If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer due to such failure. Penalties for late delivery or breach ofcontract may be imposed in accordance with relevant laws and regulations.c. Any claims or disputes arising from or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such claims or disputes may be submitted to arbitration in accordance with relevant laws and regulations. Any disputes arising from this Contract shall be subject to arbitration in ________ (Insert place of arbitration). The arbitration decision shall be final and binding on both parties.VII. Force Majeure:In case of Force Majeure circumstances such as war, earthquake, flood, fire or other unforeseeable circumstances rendering performance of this Contract impossible or very difficult, both parties should strive to reach agreement on a solution through consultation before invoking Force Majeure as a reason for terminating or postponing performance under this Contract..VIII.. Miscellaneous:This Contract constitutes the entire agreement between both parties pertaining to the subject matter hereof andsupercedes all prior agreements whether written or oral between both parties pertaining to such subject matter. No amendment or modification of this Contract shall be valid unless made in writing signed by both parties..IX.. Entire Agreement/ Governing Law：This Contract constitutes the entire agreement between buyer and seller relating to its subject matter and no further oral promises are made.. This contract is governed by ________ law..X.. Entire Agreement/ Severability：篇5PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree to conclude this Contract subject to the terms and conditions stipulated below:II. Commodities and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodities: _________________ (Commodities) in the quantity specified in the attached Schedule A.III. Price and Terms of Payment1. The total amount of this Contract is ___________________ (USD or other currency), the unit price per metric ton is___________________ (USD or other currency per metric ton). Total quantity and total amount shall be specified in Schedule A.IV. Delivery Time and Place of Shipment篇6Buyer (甲方): _____________________Seller (乙方): _____________________In consideration of the mutual promises and agreements made and intended to be performed under the terms and conditions stated below, the Buyer and the Seller agree as follows:1. Description of Goods （商品描述）The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:（双方在此填写商品名称、规格、数量等详细信息）2. Price and Payment Terms （价格及付款条款）The total value of this contract is ____ USD. （在此填写合同总价）Payment terms: （描述付款方式和条件，例如预付款、尾款、支付方式等）3. Delivery Terms （交货条款）The Seller shall deliver the goods within ____ days after receiving the order confirmation and payment of ____% of the total contract value.（描述交货期限、地点、方式等）4. Quality and Inspection （质量及检验）The Seller shall ensure that the goods are new, sound, in good condition, free from damage and defects, and comply with all applicable specifications and standards. The Buyer shall have the right to inspect the goods before shipment.（描述商品质量标准、检验方式等）5. Risk and Ownership Transfer （风险及所有权转移）Risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the agreed place of delivery. Ownership of the goods shall transfer to the Buyer upon full payment of the contract price.（描述风险和所有权转移的细节）6. Warranty and Guarantee （保修及保证）The Seller shall provide warranty and guarantee for the goods in accordance with the contract and applicable laws.（描述保修期限、保修范围、保证事项等）7. Force Majeure （不可抗力）If either party is prevented from performing its obligations due to force majeure, it shall promptly notify the other party in writing and take reasonable measures to minimize the loss.（描述不可抗力事件的认定和处理方式）8. Settlement of Disputes （争议解决）Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to ____ for arbitration.（描述争议解决的方式和机构等）9. General Terms （通用条款）（在此添加任何其他适用的通用条款，例如保密义务、合同修改、适用法律等）10. Miscellaneous （其他事项）This contract is made out in ____ copies, ____ for the Seller and ____ for the Buyer.（描述合同份数等）The parties have read and understood all the terms and conditions stated above and have signed this Agreement in witness thereof.（双方已阅读并理解以上所有条款和条件，并已签署本协议为证。
英文版销售合同样本8篇
英文版销售合同样本8篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer").I. Scope of Contract:1. The Seller agrees to sell and the Buyer agrees to purchase the goods listed in Annex A attached hereto and made a part of this Contract by reference, under the terms and conditions stipulated below.II. Price and Payment:2. The total amount of the contract is ___________ dollars ($____) ONLY, United States currency.3. Payment shall be made by T/T (telegraphic transfer) to the Seller's account as follows:a. A deposit of ___% of the total contract value shall be paid within __ days after the signing of this Contract.b. The balance shall be paid against the copy of the shipping documents confirmed by the Seller's email within __ days after the goods are shipped.III. Delivery:4. The Seller shall deliver the goods within ____ days after receiving the deposit payment from the Buyer.5. The Seller shall notify the Buyer by email about the date of dispatch and expected arrival date of the goods at the port of destination.6. In case of late delivery, the Seller shall be responsible for any loss incurred to the Buyer due to late arrival of the goods at the port of destination.IV. Quality and Inspection:7. The goods shall be in accordance with the quality, specifications and quantity stated in Annex A. Any deviation from the agreed specifications shall be notified in writing by theBuyer to the Seller immediately upon discovery of such deviation. The Seller shall be responsible for any deviation in quality and quantity which does not conform to the contract specifications or quality requirements agreed upon between both parties.V. Risk and Title Transfer:9. Title and risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the port of destination specified in Annex A. Prior to such delivery, all risks related to loss or damage of the goods shall be borne by the Seller.VI. Warranty:VII. Force Majeure:VIII. Disputes Settlement:篇2SALES CONTRACTThis Sales Contract is made on [date] between [Buyer's Full Name and Address] ("Buyer") and [Seller's Full Name and Address] ("Seller").1. Parties and Product(a) The Seller shall sell and the Buyer shall purchase the products listed in Annex A attached to this Contract.(b) The product specifications, quality standards, packaging, and other related matters shall be as per the details agreed upon by both parties.2. Price and Payment(a) The price of the products shall be as stated in Annex A. Any changes to the price must be mutually agreed upon in writing.(b) Payment shall be made in US dollars (USD) through the method specified in Annex B.3. Delivery and Shipping(a) The Seller shall ensure timely delivery of the products to the port specified in Annex C.(b) Shipping documents shall be provided by the Seller to the Buyer in a timely manner.4. Quality AssuranceSeller guarantees that all products sold to Buyer will be of the quality, specifications, and quantity agreed upon by both parties. Any discrepancies shall be promptly resolved at Seller's cost.5. Warranty and Returns(a) Seller provides a warranty period of [specify period] from the date of delivery for any defects in material or workmanship. During this period, Buyer may return products that do not meet agreed-upon standards for replacement or refund.(b) Details of returns procedures are outlined in Annex D.6. Force MajeureIn case of force majeure events, both parties shall strive to minimize the impact on this contract through mutual consultation and cooperation.7. ConfidentialityBoth parties shall keep confidential all information related to this contract, except for information that is already in the public domain or required to be disclosed by law.8. TerminationThis contract may be terminated by either party giving written notice to the other party if there is a breach of any term of this contract that cannot be resolved within a mutually agreed period.9. Jurisdiction and Disputes(a) This contract shall be governed by the laws of [specify country].(b) Any disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, the dispute shall be submitted to the courts of [specify country/jurisdiction].10. Miscellaneous(a) This contract constitutes the entire agreement between the parties and no modifications shall be made except in writing signed by both parties.(b) This contract is binding on both parties and their respective assigns, successors, and legal representatives.ANNEX A: Product List, Specifications, and PricesANNEX B: Payment Details and InstructionsANNEX C: Shipping and Delivery DetailsANNEX D: Returns and Warranty ProceduresBuyer: [Signature]Date: [Date]Seller: [Signature]Date: [Date]篇3Sales ContractContracting PartiesSeller:Name of Seller: [Name of Seller]Registered Address: [Registered Address]Contact Information: [Contact Information]Buyer:Name of Buyer: [Name of Buyer]Registered Address: [Registered Address]Contact Information: [Contact Information]This Sales Contract is made on [Date] by and between the Seller and the Buyer, concerning the sale of the following products:Article of SaleProduct Name: [Product Name]Product Specifications: [Product Specifications]Quantity: [Quantity] unitsUnit Price: [Unit Price] USDTotal Contract Value: [Total Contract Value] USDPayment Terms: [Payment Terms]Delivery Terms: [Delivery Terms]Other terms and conditions as mutually agreed upon by both parties.Terms and Conditions of Sale1. Scope of ContractThis Contract outlines the terms and conditions under which the Seller agrees to sell and the Buyer agrees to purchase the Article of Sale specified above.2. Product Quality and SpecificationsThe Seller guarantees that the Product shall be in conformity with the specifications and quality standards set out in this Contract and shall be free from any defects in materials or workmanship.3. PaymentPayment terms shall be as specified in this Contract. The Buyer shall make timely payment according to the agreed terms. Any delay in payment shall be subject to penalties as mutually agreed upon by both parties.4. Delivery and ShippingThe Seller shall ensure timely delivery of the Product to the Buyer according to the agreed delivery terms. The risk of loss or damage to the Product shall pass to the Buyer upon delivery. Any delay in delivery shall be subject to penalties as agreed upon by both parties.5. Warranty and售后支持（After-sales Support）The Seller shall provide a warranty period of [specify period] from the date of delivery for any defects in materials or workmanship found in the Product. During this period, the Seller shall, at its own expense, repair or replace any defective parts. After the warranty period, the Seller shall provide necessary after-sales support as agreed upon by both parties.6. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior consent of the other party.7. Force Majeure（不可抗力）Neither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, strikes, government actions, and other events beyond its reasonable control. The affected party shall notify the other party of the occurrence and circumstances of such event within a reasonable time.8. Settlement of Disputes（争议解决）Any dispute arising out of or in connection with this Contract shall be settled through friendly negotiation between bothparties. If no settlement can be reached, either party may submit the dispute to [specify court/arbitration institution] for resolution.9. Miscellaneous（一般条款）This Contract constitutes the entire agreement between the Seller and the Buyer, and no modifications shall be made to it except in writing signed by both parties. This Contract is made in both English and [specify other language if necessary], with equal legal effects. In case of any discrepancies between the two versions, the English version shall prevail.The Seller and the Buyer have fully read and understood this Contract, and agree to be bound by its terms and conditions.Seller: _____________________ (Signature)Date: _____________________ (Date)Buyer: _____________________ (Signature)Date: _____________________ (Date)篇4SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], a company duly organized under the laws of [Seller's Country] (hereinafter referred to as the "Seller"), and [Buyer Name], a company duly organized under the laws of [Buyer's Country] (hereinafter referred to as the "Buyer").I. Parties and Contract ObjectThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A (Product List) to this Contract.II. Terms of Payment1. Payment shall be made by wire transfer to the Seller's account within 30 days of the date of this Contract.2. In case of delay in payment, the Buyer shall pay a penalty of [specific percentage/amount] of the total contract value for each week of delay.III. Delivery1. The Seller shall deliver the products listed in Annex A to the Buyer at the agreed place and date specified in the Product List.2. Any delay in delivery shall be notified to the Buyer in writing immediately upon occurrence and confirmed by wire or cable within three days.IV. Quality and Inspection1. The Seller shall ensure that the products are of the quality and specifications agreed upon by both parties.2. The Buyer shall have the right to inspect the products during production and prior to shipment.3. If any product fails to meet the agreed specifications, the Seller shall replace such product or refund the cost of such product to the Buyer at the Seller's option.V. Warranty and Claims1. The Seller guarantees that all products sold to the Buyer are free from defects in material and workmanship for a period of [specific period] from the date of delivery to the Buyer.2. If any product is found to be defective during this period, the Seller shall replace such product or refund the cost of such product to the Buyer at the Seller's option.3. Any claim by the Buyer must be made in writing within [specific period] after receipt of the products and must be accompanied by evidence of defect.VI. Force MajeureNeither party shall be liable for any failure to perform its obligations due to causes beyond its reasonable control, such as fire, earthquake, flood, act of war or government action, etc. However, the affected party shall notify the other party immediately upon occurrence of such event and provide evidence thereof as soon as possible.VII. TerminationThis Contract may be terminated by either party giving written notice to the other party if there is a material breach of contract by the other party which is not cured within [specific period] after receipt of such notice.VIII. General Provisions篇5Sales ContractContract No. [Contract Number]Date of Contract: [Date]Seller:[Seller Full Name][Seller Address][Seller Country]Buyer:[Buyer Full Name][Buyer Address][Buyer Country]In consideration of the mutual promises and conditions set forth herein, the Seller agrees to sell and the Buyer agrees to purchase the following products under the terms and conditions stated below:Article or Products: [Description of the product or items being sold, including model numbers, specifications, quantity, etc.]Price and Payment: The total price for the Products shall be [Total Price in figures and currency]. The payment shall be made as follows: [Payment terms and conditions, including payment methods, due dates, and any deposit or installments.]Delivery: The Products shall be delivered at [Delivery Point Address] on or before [Delivery Date]. The risk of loss or damage to the Products shall pass to the Buyer upon delivery.Terms of Shipment: Shipping shall be arranged by [either party] and the choice of shipping method shall be agreed upon by both parties. Shipping documents will be provided by the Seller to the Buyer. The costs and risks related to shipping shall be borne by [specify which party bears the costs].Quality and Inspection: The Products shall conform to the quality standards specified in this Contract. The Buyer shall have the right to inspect the Products during production and prior to shipment. If any defects are found, the Seller shall promptly rectify or replace the Products as per the agreement.Warranty and Guarantee: The Seller guarantees that the Products are free from defects in material and workmanship and are in conformity with the specifications mentioned in this Contract. Any defects discovered within a period of [Warranty Period] shall be rectified or replaced at no additional cost to the Buyer.Force Majeure: Neither party shall be liable for failure to perform any obligation under this Contract due to events beyond their reasonable control, such as acts of war, riots, strikes, lockouts, government intervention, acts of God, etc. In such cases, the affected party shall promptly notify the other party of the situation and take reasonable measures to minimize its impact on the Contract.Confidentiality: Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall continue even after the termination of this Contract.Liability: If any party fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the other party due to such failure. The liability of either party shall be limited to the maximum extent possible under applicable law.Disputes Resolution: Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/tribunal] for resolution.Miscellaneous: This Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the Products specified herein and no modifications or amendments shall be valid unless agreed upon in writing by both parties. This Contract is made out in [Country/State] laws.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Contract on the dates set below:Seller: _____________________ Date: ________________Buyer: _____________________ Date: ________________(Signature of Seller) (Signature of Buyer)(Date of Signature) (Date of Signature)(Stamp if applicable) (Stamp if applicable)篇6SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [describe the product, its specifications, quantity, and any other relevant details].2. Price and Payment2.1 The total price for the goods specified in this Contract is USD [___] (say United States Dollars ___ only).2.2 Payment shall be made in United States Dollars (USD) through [specify payment method such as wire transfer, PayPal, etc.]2.3 The Buyer shall make payment within [specify timeframe,e.g., 30 days from the date of signing this Contract].3. Delivery3.1 The Seller shall deliver the goods to the Buyer at [delivery location].3.2 The delivery shall be completed within [specify timeframe, e.g., 60 days from the date of receiving full payment].4. Quality and Inspection4.1 The Seller shall ensure that the goods are in accordance with the specifications mentioned in this Contract.4.2 The Buyer has the right to inspect the goods during production and prior to delivery.5. Risk and Ownership5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery.5.2 Ownership of the goods shall pass to the Buyer upon full payment by the Buyer.6. Warranty and售后服务(After-sales Service)6.1 The Seller provides a warranty of [specify duration, e.g., 1 year] for the goods against any manufacturing defects.6.2 The Seller shall provide necessary after-sales service and support as per the Buyer's requirements.7. Force MajeureIf either party is prevented from fulfilling its obligations due to force majeure events, it shall notify the other party immediately and provide evidence of such occurrence. The affected party shall strive to overcome the situation as soon as possible.8. ConfidentialityBoth parties shall maintain confidentiality of all information shared during the performance of this Contract, unless otherwise agreed or required by law.9. TerminationThis Contract may be terminated by either party in case of breach by the other party, provided that a written notice is given to the other party specifying the reasons for termination.10. Dispute ResolutionAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify arbitration institution or court] for resolution.11. General Provisions11.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.11.2 This Contract is made in duplicate, one for each party, and shall be valid from the date of signing until fully performed by both parties. If there are any contradictions between this Contract and any other document, this Contract shall prevail.SIGNED BY BUYER: ____________________________ DATE:_____________ 买家签名：______________________ 日期：_________________ __________ （此处可附上买方签名及日期）Seller Name （此处填写卖方名称）：Signature （此处填写卖方签名）：Date （此处填写日期）：______ _________ （此处可附上卖方签名及日期）兹签字盖章以示确认本合同。
英文外贸合同范本英文5篇
英文外贸合同范本英文5篇全文共5篇示例，供读者参考篇1International Sales ContractThis International Sales Contract ("Contract") is made and entered into on this _____ day of ______, 20___ (the "Effective Date") by and between [Seller], with a principal place of business at [Seller’s address], and [Buyer], with a principal place of business at [Buyer’s address].1. Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods (the "Goods"):- Description of Goods: [Include detailed description of the Goods, including quantity, quality, specifications, and any other relevant details]2. Price and Payment:- The total price for the Goods is [Insert total price] [Currency]. Payment shall be made in [Specify currency] to the Seller’s designated bank account or as otherwise agreed by both parties.- Payment Terms: [Specify payment terms, such as advance payment, Letter of Credit, etc.]- Delivery Terms: [Specify agreed delivery terms, including shipping method, Incoterms, and delivery schedule]3. Inspection and Acceptance: The Buyer shall inspect the Goods within [Specify inspection period] days after delivery. The Buyer shall notify the Seller of any non-conforming Goods within this inspection period. If the Buyer fails to notify the Seller within the inspection period, the Goods shall be deemed accepted.4. Title and Risk of Loss: Title and risk of loss shall pass from the Seller to the Buyer upon delivery of the Goods in accordance with the agreed delivery terms.5. Warranties: The Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications as agreed by the parties. The Seller shall indemnify the Buyer for any breach of warranty.6. Force Majeure: Neither party shall be liable for any failure or delay in performance under this Contract due to events beyond its reasonable control, including but not limited to acts of God, war, terrorism, strikes, and natural disasters.7. Governing Law and Dispute Resolution: This Contract shall be governed by and construed in accordance with the laws of [Specify governing law jurisdiction]. Any dispute arising out of or relating to this Contract shall be resolved through negotiation in good faith. If the parties fail to reach a resolution through negotiation, the dispute shall be submitted to arbitration in accordance with the rules of [Specify arbitration institution].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior negotiations, agreements, and understandings, whether oral or written.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.[Seller’s Signature] [Buyer’s Signature]_________________________ _________________________[Printed Name of Seller] [Printed Name of Buyer][Date] [Date]篇2Foreign Trade ContractThis Foreign Trade Contract ("Contract") is made and entered into this ____ day of ____, 20__, by and between:Seller: [Name of Seller]Address: [Address of Seller]Buyer: [Name of Buyer]Address: [Address of Buyer]WHEREAS, Seller is engaged in the business of manufacturing and selling [Description of Products], and Buyer wishes to purchase the said products from Seller; andWHEREAS, both parties have agreed to the terms and conditions set forth in this Contract;NOW, THEREFORE, in consideration of the mutual promises and covenants contained herein, the parties agree as follows:1. Products: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products: [Description of Products], in accordance with the terms and conditions of this Contract.2. Quantity: The quantity of products to be purchased by Buyer from Seller shall be as follows: [Quantity of Products].3. Price: The price for the products shall be [Price], which shall be payable in [Currency] by [Payment Method].4. Delivery: Seller shall deliver the products to Buyer's address as specified in this Contract within [Delivery Timeframe]. Seller shall be responsible for the costs of shipping and insurance.5. Inspection: Buyer reserves the right to inspect the products upon delivery. If the products do not conform to the specifications set forth in this Contract, Buyer shall have the right to reject the products and request a replacement or refund from Seller.6. Quality: Seller warrants that the products shall be of merchantable quality and free from defects in materials and workmanship. Seller shall be responsible for any defects ornon-conformities in the products.7. Terms of Payment: The terms of payment shall be as follows: [Payment Terms].8. Force Majeure: Neither party shall be liable for any failure or delay in performance under this Contract due to any cause beyond its reasonable control, including but not limited to acts of God, war, terrorism, riots, labor disputes, and natural disasters.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Location].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.SELLER:___________________________[Name of Seller][Title of Seller]BUYER:___________________________[Name of Buyer][Title of Buyer]This document constitutes a legally binding agreement between the parties hereto.篇3International Sales ContractThis International Sales Contract (the "Contract") is entered into on [insert date] (the "Effective Date") by and between:Seller: [insert name of seller], a company organized and existing under the laws of [insert country], with its principal place of business located at [insert address] (the "Seller");Buyer: [insert name of buyer], a company organized and existing under the laws of [insert country], with its principal place of business located at [insert address] (the "Buyer").Whereas, Seller is engaged in the business of manufacturing and selling [insert description of goods];Whereas, Buyer desires to purchase [insert quantity and description of goods] from Seller;Now, therefore, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Sale of Goods. Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of, the goods as described above, in accordance with the terms and conditions of this Contract.2. Price and Payment Terms. The price of the goods shall be [insert price] per unit. Buyer shall pay Seller in [insert currency]within [insert number] days of the invoice date. Payment shall be made by wire transfer to Seller's designated bank account.3. Delivery. Seller shall deliver the goods to Buyer's designated location on the date specified by the Parties. The risk of loss or damage to the goods shall transfer from Seller to Buyer upon delivery.4. Quality. The goods shall conform to the specifications set forth in this Contract. Buyer shall have the right to inspect the goods upon delivery and reject any non-conforming goods.5. Warranties. Seller warrants that the goods shall be free from defects in materials and workmanship and will conform to the specifications set forth in this Contract. Seller further warrants that it has the right to sell the goods and that the sale of the goods will not infringe upon any third party rights.6. Governing Law. This Contract shall be governed by and construed in accordance with the laws of [insert governing law jurisdiction].7. Dispute Resolution. Any dispute arising out of or in connection with this Contract shall be resolved through good faith negotiations between the parties. If the dispute cannot be resolved amicably, the parties agree to submit the matter toarbitration in accordance with the rules of [insert arbitration organization].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title]Buyer:[Signature][Name][Title][End of Contract]This is a sample template of an International Sales Contract. It is recommended that parties seek legal advice before entering into such agreements.篇4International Sales ContractThis International Sales Contract (the “Contract”) is made as of [Date], by and between [Seller], having its registered office at [address] and [Buyer], having its registered office at [address].1. Products – The seller agrees to sell and deliver to the buyer the following products:- [Description of Product 1] – Quantity: [Number], Unit Price: [Price]- [Description of Product 2] – Quantity: [Number], Unit Price: [Price]2. Delivery – The seller agrees to deliver the products to the buyer's warehouse [Location] within [Number] days of the signing of this Contract. The buyer will be responsible for all costs associated with delivery.3. Payment – The buyer agrees to pay the seller the total amount of [Total Price] in [Currency], within [Number] days ofthe delivery of the products. Payment can be made by wire transfer to the seller's bank account.4. Inspection and Acceptance – The buyer has the right to inspect the products upon delivery and must notify the seller within [Number] days if there are any defects ornon-conformities. If the buyer fails to notify the seller within this time frame, the products shall be deemed accepted.5. Warranty – The seller warrants that the products will be free from defects in materials and workmanship for a period of [Number] days from the delivery date. If any defects are discovered within this warranty period, the seller agrees to replace or repair the products at no additional cost to the buyer.6. Intellectual Property Rights – The seller warrants that it has all necessary rights and licenses to sell the products to the buyer, and that the sale of the products will not infringe on any third party intellectual property rights.7. Governing Law – This Contract shall be governed by and construed in accordance with the laws of [Country].8. Arbitration – Any disputes arising out of or in connection with this Contract shall be settled by arbitration in accordancewith the rules of the [Arbitration Institution], and the decision of the arbitrator(s) shall be final and binding on both parties.9. Entire Agreement – This Contract contains the entire agreement between the parties with respect to the sale of the products and supersedes all prior agreements and understandings, whether written or oral.In witness whereof, the parties hereto have executed this Contract as of the date first above written.Seller: ____________________________ Date: _______________Buyer: ____________________________ Date: _______________[Seal of Seller][Seal of Buyer]This International Sales Contract is hereby executed and delivered as a deed.[Seal of Company][Seal of Company]篇5International Sale ContractThis is a contract entered into on [Date of contract] between [Seller], a company incorporated under the laws of [Seller’s country], with its principal place of business at [Seller’s address], and [Buyer], a company incorporated under the laws of [Buyer’s country], with its principal place of business at [Buyer’s address].The parties agree to the following terms and conditions:1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase [Description of the product] in the quantities specified in Exhibit A attached hereto. The quality, specifications, and packaging of the product shall meet the standards agreed upon by both parties.2. Price and PaymentThe total price for the products shall be [Total price]. Payment shall be made in [Currency] according to the following schedule: [Payment terms].3. Delivery TermsThe products shall be delivered to the Buyer’s premises at [Delivery address]. The delivery date shall be [Delivery date]. Any delay in delivery shall entitle the Buyer to a full refund.4. Risk of LossThe risk of loss or damage to the products shall pass from the Seller to the Buyer upon delivery.5. Inspection and AcceptanceThe Buyer shall have [Number of days] to inspect the products upon delivery. If the products do not conform to the specifications agreed upon, the Buyer shall have the right to reject the products and receive a full refund.6. WarrantyThe Seller warrants that the products shall be free from defects in material and workmanship for a period of [Warranty period]. In the event of any defects, the Seller shall replace or repair the products at no additional cost to the Buyer.7. Force MajeureNeither party shall be liable for any failure or delay in performance under this contract due to circumstances beyond its reasonable control, including acts of God, war, terrorism, or government actions.8. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Governing law], without regard to its conflict of laws principles.9. Dispute ResolutionAny disputes arising out of or relating to this contract shall be resolved through arbitration in [Arbitration venue] in accordance with the rules of [Arbitration association].IN WITNESS WHEREOF, the parties hereto have executed this contract as of the date first above written.[Signature of Seller] [Signature of Buyer]Exhibit A: Product quantities[Product 1]: [Quantity][Product 2]: [Quantity][Product 3]: [Quantity]。
英文版销售合同样本(分享)3篇
英文版销售合同样本（分享）3篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into as of [Date], by and between [Seller], with its principal place of business at [Address] (hereinafter referred to as “Seller”), and [Buyer], with its principal place of business at [Address](he reinafter referred to as “Buyer”).1. Agreement to Sell: Seller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase the following goods (“Goods”):Description of Goods: [Description]Quantity: [Quantity]Price: [Price]Total: [Total]2. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Date]. Risk of loss or damage to the Goods shall pass to Buyer upon delivery.3. Payment: Buyer shall pay Seller the total amount of [Total] in the following manner:- [Payment Method 1]: [Amount] due upon signing of Contract- [Payment Method 2]: [Amount] due upon delivery of Goods4. Inspection and Acceptance: Buyer shall inspect the Goods upon delivery. Any defects or discrepancies must be reported to Seller within [Number] days of delivery.5. Warranties: Seller warrants that the Goods are free from defects in materials and workmanship. Any claims for breach of warranty must be made within [Number] days of delivery.Sell er’s liability under this warranty shall be limited to the repair or replacement of defective Goods.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising under this Contract shall be resolved by arbitration in [City, State/Country].IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller]By: ___________________________Name: _________________________Title: __________________________[Buyer]By: ___________________________Name: _________________________Title: __________________________This Sales Contract is the entire agreement between the parties and supersedes all prior negotiations, representations, or agreements. This Contract may not be amended except in writing signed by both parties.篇2Sales ContractThis Sales Contract (the "Contract") is entered into on this 1st day of January, 2023, by and between XYZ Company, with its principal place of business located at 123 Main Street, City, State, Zip Code, hereinafter referred to as the "Seller," and ABC Company, with its principal place of business located at 456Market Street, City, State, Zip Code, hereinafter referred to as the "Buyer."Whereas, the Buyer wishes to purchase certain goods from the Seller, and the Seller wishes to sell such goods to the Buyer, both parties hereby agree to the following terms and conditions:1. Description of Goods: The Seller agrees to sell, and the Buyer agrees to purchase, the following goods: [insert detailed description of goods including quantity, quality, specifications, and any other relevant information].2. Price and Payment Terms: The total purchase price for the goods listed above shall be $100,000, payable in full by wire transfer within 30 days of the date of this Contract. The Buyer shall be responsible for any bank fees associated with the wire transfer.3. Delivery and Acceptance: The Seller shall deliver the goods to the Buyer within 15 days of receiving payment. The Buyer shall inspect the goods upon delivery and notify the Seller of any defects or discrepancies within 5 days.4. Risk of Loss: The risk of loss or damage to the goods shall transfer from the Seller to the Buyer upon delivery.5. Warranty: The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of 6 months from the date of delivery. If any defects are discovered during this period, the Seller shall either replace the goods or provide a refund at its discretion.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [insert state].In witness whereof, the parties have executed this Contract as of the date first written above.XYZ CompanyBy: __________________________Title: _________________________ABC CompanyBy: __________________________Title: _________________________This Sales Contract is hereby accepted by both parties as of the date first written above.【Note: This is just a sample contract and should be modified as necessary to fit the specific needs and circumstances of the parties involved. It is recommended to consult with a legal professional before finalizing any sales contract.】篇3Sample Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller’s Name], with a place of business at [Seller’s Address], and [Buyer’s Name], with a place of business at [Buyer’s Address].1. Scope of AgreementThe Seller agrees to sell and the Buyer agrees to purchase the following goods under the terms and conditions set forth in this Contract:- [Description of Goods]- [Quantity]- [Price]2. DeliveryThe Seller shall deliver the goods to the Buyer’s address on or before [Delivery Date]. The Buyer agrees to accept delivery of the goods on the specified date.3. PaymentThe Buyer shall pay the Seller the total purchase price of [Amount] in [Currency] upon delivery of the goods. Payment shall be made by [Payment Method].4. WarrantiesThe Seller warrants that the goods will be free from defects and conform to the description provided. The Buyer has the right to inspect the goods upon delivery and notify the Seller of any defects within [Number] days.5. LiabilityThe Seller shall not be liable for any damages or claims arising from the Buyer’s use of the goods. The Buyer assumes all risks associated with the use of the goods.6. Governing LawThis Contract shall be governed by the laws of [Country]. Any disputes arising from the Contract shall be settled through arbitration in [City], [Country].7. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller’s Signature] [Buyer’s Signature][Print Name] [Print Name]This Sales Contract is hereby accepted and agreed to by the parties:[Seller’s Name] [Date][Buyer’s Name] [Date]This is a sample sales contract and should be reviewed by legal counsel before use.。
中英文货物出口合同(Sales Contract)4篇
中英文货物出口合同(Sales Contract)4篇篇1Sales ContractThis Sales Contract is entered into on [Date] between:Seller: [Company Name], a company registered under the laws of [Country], with its principal place of business at [Address]Buyer: [Company Name], a company registered under the laws of [Country], with its principal place of business at [Address]1. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the goods described in Schedule A attached hereto (the "Goods") in accordance with the terms and conditions of this Sales Contract.2. PriceThe price of the Goods shall be as set forth in Schedule A and shall be paid by the Buyer to the Seller in the currency stated in Schedule A. Payment shall be made in accordance with the terms set forth in Schedule A.3. DeliveryThe Seller shall deliver the Goods to the Buyer's designated location as specified in Schedule A. The Seller shall use its best efforts to ensure that the Goods are delivered in a timely manner and in good condition.4. InspectionThe Buyer shall have the right to inspect the Goods upon delivery and may reject any Goods that do not conform to the specifications set forth in this Sales Contract. Any rejected Goods shall be returned to the Seller at the Seller's expense.5. WarrantyThe Seller warrants that the Goods shall conform to the specifications set forth in this Sales Contract and shall be free from defects in material and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Sales Contract shall be resolved by arbitration in [City], [Country] in accordance with the rules of the [Arbitration Institution].7. Entire AgreementThis Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the Goods and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller:By: ________________________Name:Title:Buyer:By: ________________________Name:Title:Schedule ADescription of Goods:Quantity:Price:Delivery Location:Payment Terms:篇2Sales ContractSeller: [Seller's Name]Address: [Seller's Address]City: [Seller's City]Country: [Seller's Country]Telephone: [Seller's Telephone]Email: [Seller's Email]Buyer: [Buyer's Name]Address: [Buyer's Address]City: [Buyer's City]Country: [Buyer's Country]Telephone: [Buyer's Telephone]Email: [Buyer's Email]This Sales Contract is entered into between the Seller and the Buyer on [Date], for the sale of the following goods:Description of Goods:1. Product Name:2. Quantity:3. Price per Unit:4. Total Price:5. Payment Terms:6. Delivery Terms:7. Inspection Period:8. Warranty Period:9. Governing Law:1. The Seller agrees to sell the specified goods to the Buyer, and the Buyer agrees to purchase the goods from the Seller.2. The quantity and quality of the goods shall be in accordance with the specifications agreed upon by both parties.3. The price per unit and the total price of the goods shall be as specified in this contract.4. The payment terms shall be [Payment Terms], with a [Deposit Amount] deposit due upon signing this contract and the remaining balance due before the goods are delivered.5. The delivery terms shall be [Delivery Terms], with the goods to be delivered to the Buyer's address as specified in this contract.6. The Buyer shall have an inspection period of [Inspection Period] days upon receiving the goods to inspect the goods for any defects or non-conformities. Any claims for defects ornon-conformities must be made in writing during the inspection period.7. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery.8. This contract shall be governed by the laws of [Governing Law], and any disputes arising out of this contract shall be resolved through arbitration in [Arbitration Location].9. This Sales Contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings, whether written or oral.Seller's Signature: _______________ Date: _______________Buyer's Signature: _______________ Date: _______________This Sales Contract is hereby accepted by both parties on the date first above written.[End of Contract]篇3Sales ContractThis Sales Contract is made and entered into by and between the Seller, [Seller's Name], located at [Seller's Address], and the Buyer, [Buyer's Name], located at [Buyer's Address], on this [Date].1. Sale of GoodsSeller agrees to sell, and Buyer agrees to buy, the following goods:- Description of goods: [Description]- Quantity: [Quantity]- Unit Price: [Unit Price]2. Payment TermsThe total price for the goods shall be [Total Price]. Buyer shall pay Seller the total price in the following manner:- [Payment Schedule]3. DeliverySeller shall deliver the goods to Buyer at [Delivery Location] on or before [Delivery Date]. Buyer shall be responsible for any costs associated with the transport of the goods from the delivery location to the final destination.4. InspectionBuyer shall have the right to inspect the goods upon delivery and shall have [Number of Days] days to notify Seller of any defects or nonconformities. If Buyer fails to notify Seller within the specified time frame, the goods shall be deemed accepted by Buyer.5. Title and Risk of LossTitle to the goods shall pass to Buyer upon delivery. Risk of loss shall pass to Buyer upon delivery to the carrier at the delivery location.6. WarrantiesSeller warrants that the goods shall conform to the description provided and shall be free from defects in material and workmanship. Seller shall not be liable for any defects caused by misuse, negligence, or improper handling by Buyer.7. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Dispute ResolutionAny disputes arising out of or relating to this Sales Contract shall be resolved through arbitration in [City], [State/Country]. The prevailing party shall be entitled to recover its reasonable attorney fees and costs.In witness whereof, the parties have executed this Sales Contract as of the date first above written.Seller: [Seller's Signature]Buyer: [Buyer's Signature]篇4Sales ContractThis Sales Contract is made on [Date], by and between [Seller], with its principal place of business located at [Address] (hereinafter referred to as "Seller") and [Buyer], with its principal place of business located at [Address] (hereinafter referred to as "Buyer").1. Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (hereinafter referred to as the "Goods"):- Description of Goods- Quantity of Goods- Price of Goods2. Delivery: Seller agrees to deliver the Goods to the Buyer's designated location at the following address: [Delivery Address]. The delivery date shall be [Date]. Any delay in delivery must be communicated to the Buyer in writing.3. Price: The total price for the Goods specified in this Sales Contract is [Amount in Currency]. Buyer agrees to pay Seller the full amount upon delivery of the Goods.4. Payment Terms: Payment shall be made by [Payment Method] within [Number] days of delivery of the Goods. Failure to make payment within the agreed upon timeframe may result in late fees and interest charges.5. Quality: The Goods shall conform to the specifications outlined in this Sales Contract and shall be of satisfactory quality. Any defects or nonconformities must be reported to Seller within [Number] days of delivery.6. Risk of Loss: The risk of loss or damage to the Goods shall pass to the Buyer upon delivery. Seller shall not be held liable for any damages or losses incurred during transport.7. Warranty: Seller warrants that the Goods are free from defects in materials and workmanship for a period of [Number] days from the date of delivery. Seller's sole obligation under this warranty shall be to replace or repair any defective Goods.8. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of this Sales Contract shall be resolved through arbitration in [City], [Country].In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.SELLER: [Seller Name]BUYER: [Buyer Name]。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SALE CONTRACTNo:Date:The Buyer:Address:Tel: Fax:Attn: Position:The Seller: WAL CO., LTD.Address: Gangdong Devgsu, ChinaTel:0086-0816631 Fax:0086-03817631Attn: JingWu Position: DirectorThe Exporter: SHANGHAI PORT CO., LTD.Address: Rm.1601,Huarouth Road, Shanghai, ChinaTel:0086-02-58821703 Post Code:200122E-mail:Attn: Mric LiArticle 1: Commodity – Quantity – Price – Amount∙Manufacturer: Wul Co., Ltd.∙Original: ChinaNo Description Quantity Unit Price Amount ( US Dollar)CIF port1234Total amountSay:Article 2: Quality2.1 All the above Goods are 100% brand-new, ready for useWarranty: 24 months after delivery dateDuring warranty period time, if goods does not meet the requirement of contract or there is some trouble / defect occurring to the goods while the Buyer operates the equipment normally following the technical manuals or the Seller’s instructions, the Seller shall be liable mistaken parts with the new ones within 30 days upon the Buyer’s requirement and free of charge.Article 3: PriceThe contract price shall be specified in United State Dollars (US$). The contract price payable to the Seller under contract for the Goods at CIF H port (Incoterms 2000) and full performance of its contractual obligations in the lump sum of US$Article 4: Term of Payment: By an irrevocable Letter of Credit at sight for 100% invoice value in favor of the following beneficiary:BENEFICIARY: SHANGHA., LTD.Address: Rm.16 Shanghai, ChinaEXPORTER’S BANK INFORMATION:BANK NAME:C BANK,SHANGHAI BRANCH.ADD:201 ANGHAI P.R.C.ZIP CO120A/C: 3100220005117SWIFT CODE:CCNBJSHXThe following documents shall be send to the Buyer by express courier within 3 working days after shipment:-Signed Commercial Invoice in triplicate-Signed Detailed packing list in triplicate-Copy of full set (3/3) original “Clean on board” Bill of Lading marked “Freight Prepaid”, made out to order of the L/C issuing bank notify the Applicant.-Copy of certificate of Original issued by the China Chamber of Commerce or its authorized agencies in the China in 01 original and 02 copy.-Copy of certificate of quality and quantity issued by the manufacturer in triplicate-Copy of Insurance policy of certificate for Invoice value 110% covering “all risks” showing claim payable in Vietnam in 01 original and 02 copy.-Beneficiary’s certificate enclosing express couriers receipt showing that a full set of non-negotiable shipping documents have been sent to the Buyer within 05 working days after shipment.Article 5: Shipment time-The shipment: before-Partial shipment: is allowed-Trans shipment: not allowedThe following information shall be informed to the Buyer by email / phone or fax within and after shipment: Description of the Goods, invoice value, date of delivery, ETD, ETA…Article 6: Packing and Marking6.1 Packing:.6.2 Marking: External two side of bobbin should have a sticky paper label with these below information:Lot No:CoreContract No:WUJIL CO., LTD./Article 7: Force Majeure7.1 Should any contingencies arises which prevent the complete or partial fulfillment by either of the parties of their respective obligations under this contract, namely Fire, Acts of God, prohibition of export, arrest or restrain of Rules, Government and civil war, or war-like operation, blockage, riots or any other causes beyond the parties control, the time stipulated for fulfillment of the obligations shall be extended for a period equal to that during which such contingencies will remain in force.7.2 If a force major situation arise, the Seller shall promptly notify the Buyer in writing within 07 (seven) days with an evidence showing the force major.Article 8: ClaimWhen notice of any claim by the Buyer shall be delivered to the Seller within 30 (thirty) days after the arrival of the goods at destination stated in this contract, accompanied by satisfactory evidence(s) thereof. The Parties shall endeavor to settle amicably any claim or dispute of which may arise under this contract. Falling which, the dispute shall finally be referred and settles by Arbitration Committee of Singapore for arbitration. The arbitration award will be final and binding upon both sides. The losing party will be in-charge of the arbitrator’s expenses.The contract is made in English and comes into force from the date of signing and the L/C have been issued.This contract could be transmitted by FAX, so the facsimile is regarded as the original contract and have the same legal effect.FOR THE SELLER FOR THE BUYER FOR THE EXPORTER。