论文中英文翻译(译文)

合集下载

本科毕业论文外文翻译【范本模板】

本科毕业论文外文翻译外文译文题目:不确定条件下生产线平衡：鲁棒优化模型和最优解解法学院：机械自动化专业：工业工程学号: 201003166045学生姓名: 宋倩指导教师：潘莉日期: 二○一四年五月Assembly line balancing under uncertainty: Robust optimization modelsand exact solution methodÖncü Hazır , Alexandre DolguiComputers ＆Industrial Engineering，2013,65：261–267不确定条件下生产线平衡：鲁棒优化模型和最优解解法安库·汉泽，亚历山大·多桂计算机与工业工程，2013，65：261–267摘要这项研究涉及在不确定条件下的生产线平衡，并提出两个鲁棒优化模型。

假设了不确定性区间运行的时间。

该方法提出了生成线设计方法,使其免受混乱的破坏。

基于分解的算法开发出来并与增强策略结合起来解决大规模优化实例.该算法的效率已被测试,实验结果也已经发表。

本文的理论贡献在于文中提出的模型和基于分解的精确算法的开发.另外，基于我们的算法设计出的基于不确定性整合的生产线的产出率会更高，因此也更具有实际意义。

此外,这是一个在装配线平衡问题上的开创性工作,并应该作为一个决策支持系统的基础。

关键字：装配线平衡；不确定性; 鲁棒优化；组合优化；精确算法1.简介装配线就是包括一系列在车间中进行连续操作的生产系统。

零部件依次向下移动直到完工。

它们通常被使用在高效地生产大量地标准件的工业行业之中。

在这方面，建模和解决生产线平衡问题也鉴于工业对于效率的追求变得日益重要。

生产线平衡处理的是分配作业到工作站来优化一些预定义的目标函数。

那些定义操作顺序的优先关系都是要被考虑的,同时也要对能力或基于成本的目标函数进行优化。

就生产（绍尔，1999）产品型号的数量来说，装配线可分为三类：单一模型（SALBP）,混合模型(MALBP）和多模式（MMALBP）。

毕业论文英文参考文献与译文

Inventory managementInventory ControlOn the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion.The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility.Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored:First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments .Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field ofthese big boys, but also their simple modules inside the warehouse management functionality is defined as "inventory management" or "inventory control." This makes the already not quite understand what our inventory control, but not sure what is inventory control.In fact, from the perspective of broadly understood, inventory control, shouldinclude the following:First, the fundamental purpose of inventory control. We know that the so-called world-class manufacturing, two key assessment indicators (KPI) is, customer satisfaction and inventory turns, inventory turns and this is actually the fundamental objective of inventory control.Second, inventory control means. Increase inventory turns, relying solely on the so-called physical inventory control is not enough, it should be the demand and supply chain management process flow of this large output, and this big warehouse management processes in addition to including this link, the more important The section also includes: forecasting and order processing, production planning and control, materials planning and purchasing control, inventory planning and forecasting in itself, as well as finished products, raw materials, distribution and delivery of the strategy, and even customs management processes.And with the demand and supply chain management processes throughout the process, it is the information flow and capital flow management. In other words, inventory itself is across the entire demand and supply management processes in all aspects of inventory control in order to achieve the fundamental purpose, it must control all aspects of inventory, rather than just manage the physical inventory at hand.Third, inventory control, organizational structure and assessment.Since inventory control is the demand and supply chain management processes, output, inventory control to achieve the fundamental purpose of this process must be compatible with a rational organizational structure. Until now, we can see that many companies have only one purchasing department, purchasing department following pipe warehouse. This is far short of inventory control requirements. From the demand and supply chain management process analysis, we know that purchasing and warehouse management is the executive arm of the typical, and inventory control should focus on prevention, the executive branch is very difficult to "prevent inventory" for the simple reason that they assessment indicatorsin large part to ensure supply (production, customer). How the actual situation, a reasonable demand and supply chain management processes, and thus set the corresponding rational organizational structure and is a question many of our enterprisesto exploreThe role of inventory controlInventory management is an important part of business management. In the production and operation activities, inventory management must ensure that both the production plant for raw materials, spare parts demand, but also directly affect the purchasing, sales of share, sales activities. To make an inventory of corporate liquidity, accelerate cash flow, the security of supply under the premise of minimizing Yaku funds, directly affects the operational efficiency. Ensure the production and operation needs of the premise, so keep inventories at a reasonable level; dynamic inventory control, timely, appropriate proposed order to avoid over storage or out of stock; reduce inventory footprint, lower total cost of inventory; control stock funds used to accelerate cash flow.Problems arising from excessive inventory: increased warehouse space andinventory storage costs, thereby increasing product costs; take a lot of liquidity, resultingin sluggish capital, not only increased the burden of payment of interest, etc., would affect the time value of money and opportunity income; finished products and raw materials caused by physical loss and intangible losses; a large number of enterprise resource idle, affecting their rational allocation and optimization; cover the production, operation of the whole process of the various contradictions and problems, is not conducive to improve the management level.Inventory is too small the resulting problems: service levels caused a decline in the profit impact of marketing and corporate reputation; production system caused by inadequate supply of raw materials or other materials, affecting the normal production process; to shorten lead times, increase the number of orders, so order (production) costs; affect the balance of production and assembly of complete sets.NotesInventory management should particularly consider the following two questions:First, according to sales plans, according to the planned production of the goods circulated in the market, we should consider where, how much storage.Second, starting from the level of service and economic benefits to determine howto ensure inventories and supplementary questions.The two problems with the inventory in the logistics process functions.In general, the inventory function:(1)to prevent interrupted. Received orders to shorten the delivery of goods fromthe time in order to ensure quality service, at the same time to prevent out of stock.(2)to ensure proper inventory levels, saving inventory costs.(3)to reduce logistics costs. Supplement with the appropriate time interval compatible with the reasonable demand of the cargo in order to reduce logistics costs, eliminate or avoid sales fluctuations.(4)ensure the production planning, smooth to eliminate or avoid sales fluctuations.(5)display function.(6)reserve. Mass storage when the price falls, reduce losses, to respond to disasters and other contingencies.About the warehouse (inventory) on what the question, we must consider the number and location. If the distribution center, it should be possible according to customer needs, set at an appropriate place; if it is stored in central places to minimize the complementary principle to the distribution centers, there is no place certain requirements. When the stock base is established, will have to take into account are stored in various locations in what commodities.库存管理库存控制在谈到所谓“库存控制”的时候，很多人将其理解为“仓储管理”，这实际上是个很大的曲解。

毕业论文外文翻译(中英文)

译文交通拥堵和城市交通系统的可持续发展摘要:城市化和机动化的快速增长,通常有助于城市交通系统的发展，是经济性，环境性和社会可持续性的体现,但其结果是交通量无情增加，导致交通拥挤。

道路拥挤定价已经提出了很多次，作为一个经济措施缓解城市交通拥挤，但还没有见过在实践中广泛使用，因为道路收费的一些潜在的影响仍然不明。

本文首先回顾可持续运输系统的概念,它应该满足集体经济发展,环境保护和社会正义的目标.然后,根据可持续交通系统的特点，使拥挤收费能够促进经济增长，环境保护和社会正义。

研究结果表明,交通拥堵收费是一个切实有效的方式，可以促进城市交通系统的可持续发展。

一、介绍城市交通是一个在世界各地的大城市迫切关注的话题。

随着中国的城市化和机动化的快速发展,交通拥堵已成为一个越来越严重的问题,造成较大的时间延迟,增加能源消耗和空气污染，减少了道路网络的可靠性．在许多城市,交通挤塞情况被看作是经济发展的障碍.我们可以使用多种方法来解决交通挤塞,包括新的基础设施建设，改善基础设施的维护和操作,并利用现有的基础设施,通过需求管理策略,包括定价机制,更有效地减少运输密度.交通拥堵收费在很久以前就已提出，作为一种有效的措施,来缓解的交通挤塞情况。

交通拥堵收费的原则与目标是通过对选择在高峰拥挤时段的设施的使用实施附加收费,以纾缓拥堵情况．转移非高峰期一些出行路线,远离拥挤的设施或高占用车辆，或完全阻止一些出行,交通拥堵收费计划将在节省时间和降低经营成本的基础上,改善空气中的质量，减少能源消耗和改善过境生产力。

此计划在世界很多国家和地方都有成功的应用。

继在2０世纪70年代初和8０年代中期挪威与新加坡实行收费环,在20０３年2月伦敦金融城推出了面积收费；直至现在,它都是已经开始实施拥挤收费的大都市圈中一个最知名的例子。

然而,交通拥堵收费由于理论和政治的原因未能在实践中广泛使用。

道路收费的一些潜在的影响尚不清楚,和城市发展的拥塞定价可持续性,需要进一步研究。

机电专业论文英文文献及其中文译文

毕业论文外文文献翻译译文题目:INTEGRATION OF MACHINERY外文资料翻译资料来源：文章名：INTEGRATION OF MACHINERY 《Digital Image Processing》书刊名：作者：Y. Torres J. J. Pavón I. Nieto and J. A.Rodríguez章节：2.4 INTEGRATION OF MACHINERYINTEGRATION OF MACHINERY （From ELECTRICAL AND MACHINERY INDUSTRY）ABSTRACT Machinery was the modern science and technology development inevitable resultthis article has summarized the integration of machinery technology basic outlineand the development background .Summarized the domestic and foreign integration ofmachinery technology present situation has analyzed the integration of machinerytechnology trend of development. Key word：integration of machinery ，technology，present situation ，productt，echnique of manufacture ，trend of development 0. Introduction modern science and technology unceasing development impelleddifferent discipline intersecting enormously with the seepage has caused the projectdomain technological revolution and the transformation .In mechanical engineeringdomain because the microelectronic technology and the computer technology rapiddevelopment and forms to the mechanical industry seepage the integration of machinerycaused the mechanical industry the technical structure the product organizationthe function and the constitution the production method and the management systemhas had the huge change caused the industrial production to enter into quottheintegration of machineryquot by quotthe machinery electrificationquot for the characteristicdevelopment phase. 1. Integration of machinery outline integration of machinery is refers in theorganization new owner function the power function in the information processingfunction and the control function introduces the electronic technology unifies thesystem the mechanism and the computerization design and the software whichconstitutes always to call. The integration of machinery development also has becomeone to have until now own system new discipline not only develops along with thescience and technology but also entrusts with the new content .But its basiccharacteristic may summarize is: The integration of machinery is embarks from thesystem viewpoint synthesis community technologies and so on utilization mechanicaltechnology microelectronic technology automatic control technology computertechnology information technology sensing observation and control technologyelectric power electronic technology connection technology information conversiontechnology as well as software programming technology according to the systemfunction goal and the optimized organization goal reasonable disposition and thelayout various functions unit in multi-purpose high grade redundant reliable inthe low energy consumption significance realize the specific function value andcauses the overall system optimization the systems engineering technology .From thisproduces functional system then becomes an integration of machinery systematic orthe integration of machinery product. Therefore quotintegration of machineryquot coveringquottechnologyquot and quotproductquot two aspects .Only is the integration of machinerytechnology is based on the above community technology organic fusion one kind ofcomprehensivetechnology but is not mechanical technical the microelectronictechnology as well as other new technical simple combination pieces together .Thisis the integration of machinery and the machinery adds the machinery electrificationwhich the electricity forms in the concept basic difference .The mechanicalengineering technology has the merely technical to develop the machineryelectrification still was the traditional machinery its main function still wasreplaces with the enlargement physical strength .But after develops the integrationof machinery micro electron installment besides may substitute for certainmechanical parts the original function but also can entrust with many new functionslike the automatic detection the automatic reduction information demonstrate therecord the automatic control and the control automatic diagnosis and the protectionautomatically and so on .Not only namely the integration of machinery product ishumans hand and body extending humans sense organ and the brains look has theintellectualized characteristic is the integration of machinery and the machineryelectrification distinguishes in the function essence. 2. Integration of machinery development condition integration of machinerydevelopment may divide into 3 stages roughly.20th century 60s before for the firststage this stage is called the initial stage .In this time the people determinationnot on own initiative uses the electronic technology the preliminary achievement toconsummate the mechanical product the performance .Specially in Second World Warperiod the war has stimulated the mechanical product and the electronic technologyunion these mechanical and electrical union military technology postwar transferscivilly to postwar economical restoration positive function .Developed and thedevelopment at that time generally speaking also is at the spontaneouscondition .Because at that time the electronic technology development not yetachieved certain level mechanical technical and electronic technology union alsonot impossible widespread and thorough development already developed the productwas also unable to promote massively. The 20th century 7080 ages for the second stagemay be called the vigorous development stage .This time the computer technologythe control technology the communication development has laid the technology basefor the integration of machinery development . Large-scale ultra large scaleintegrated circuit and microcomputer swift and violent development has provided thefull material base for the integration of machinery development .This timecharacteristic is :①A mechatronics word first generally is accepted in Japanprobably obtains the quite widespread acknowledgment to 1980s last stages in theworldwide scale ②The integration of machinery technology and the product obtainedthe enormous development ③The various countries start to the integration ofmachinery technology and the product give the very big attention and the support.1990s later periods started the integration of machinery technology the new stagewhich makes great strides forward to the intellectualized direction the integrationof machinery enters the thorough development time .At the same time optics thecommunication and so on entered the integration of machinery processes thetechnology also zhan to appear tiny in the integration of machinery the footappeared the light integration of machinery and the micro integration of machineryand so on the new branch On the other hand to the integration ofmachinery systemmodeling design the analysis and the integrated method the integration ofmachinery discipline system and the trend of development has all conducted thethorough research .At the same time because the hugeprogress which domains and so on artificial intelligence technology neural networktechnology and optical fiber technology obtain opened the development vast worldfor the integration of machinery technology .These research will urge theintegration of machinery further to establish the integrity the foundation and formsthe integrity gradually the scientific system. Our country is only then starts fromthe beginning of 1980s in this aspect to study with the application .The State Councilhad been established the integration of machinery leading group and lists as quot863plansquot this technology .When formulated quot95quot the plan and in 2010 developed thesummary had considered fully on international the influence which and possiblybrought from this about the integration of machinery technology developmenttrend .Many universities colleges and institutes the development facility and somelarge and middle scale enterprises have done the massive work to this technicaldevelopment and the application does not yield certain result but and so on theadvanced countries compared with Japan still has the suitable disparity. 3. Integration of machinery trend of development integrations of machinery arethe collection machinery the electron optics the control the computer theinformation and so on the multi-disciplinary overlapping syntheses its developmentand the progress rely on and promote the correlation technology development and theprogress .Therefore the integration of machinery main development direction is asfollows: 3.1 Intellectualized intellectualizations are 21st century integration ofmachinery technological development important development directions .Theartificial intelligence obtains day by day in the integration of machineryconstructors research takes the robot and the numerical control engine bedintellectualization is the important application .Here said quottheintellectualizationquot is to the machine behavior description is in the control theoryfoundation the absorption artificial intelligence the operations research thecomputer science the fuzzy mathematics the psychology the physiology and the chaosdynamics and so on the new thought the new method simulate the human intelligenceenable it to have abilities and so on judgment inference logical thinkingindependent decision-making obtains the higher control goal in order to .Indeedenable the integration of machinery product to have with the human identicalintelligence is not impossible also is nonessential .But the high performancethe high speed microprocessor enable the integration of machinery product to havepreliminary intelligent or humans partial intelligences then is completelypossible and essential. In the modern manufacture process the information has become the controlmanufacture industry the determining factor moreover is the most active actuationfactor .Enhances the manufacture system information-handling capacity to become themodern manufacture science development a key point .As a result of the manufacturesystem information organization and structure multi-level makes the information thegain the integration and the fusion presents draws up the character informationmeasuremulti-dimensional as well as information organizations multi-level .In themanufacture information structural model manufacture information uniform restraintdissemination processing and magnanimous data aspects and so on manufacture knowledgelibrary management all also wait for further break through. Each kind of artificial intelligence tool and the computation intelligence methodpromoted the manufacture intelligence development in the manufacture widespreadapplication .A kind based on the biological evolution algorithm computationintelligent agent in includes thescheduling problem in the combination optimization solution area of technologyreceives the more and more universal attention hopefully completes the combinationoptimization question when the manufacture the solution speed and the solutionprecision aspect breaks through the question scale in pairs the restriction .Themanufacture intelligence also displays in: The intelligent dispatch the intelligentdesign the intelligent processing the robot study the intelligent control theintelligent craft plan the intelligent diagnosis and so on are various These question key breakthrough may form the product innovation the basicresearch system. Between 2 modern mechanical engineering front science differentscience overlapping fusion will have the new science accumulation the economicaldevelopment and societys progress has had the new request and the expectation tothe science and technology thus will form the front science .The front science alsohas solved and between the solution scientific question border area .The front sciencehas the obvious time domain the domain and the dynamic characteristic .The projectfront science distinguished in the general basic science important characteristicis it has covered the key science and technology question which the project actualappeared. Manufacture system is a complex large-scale system for satisfies the manufacturesystem agility the fast response and fast reorganization ability must profit fromthe information science the life sciences and the social sciences and so on themulti-disciplinary research results the exploration manufacture system newarchitecture the manufacture pattern and the manufacture system effectiveoperational mechanism .Makes the system optimization the organizational structureand the good movement condition is makes the system modeling the simulation andthe optimized essential target .Not only the manufacture system new architecture tomakes the enterprise the agility and may reorganize ability to the demand responseability to have the vital significance moreover to made the enterprise first floorproduction equipment the flexibility and may dynamic reorganization ability set ahigher request .The biological manufacture view more and more many is introduced themanufacture system satisfies the manufacture system new request. The study organizes and circulates method and technique of complicated systemfrom the biological phenomenon is a valid exit which will solve many hard nut tocracks that manufacturing industry face from now on currently .Imitating to livingwhat manufacturing point is mimicry living creature organ of from the organizationfrom match more from growth with from evolution etc. function structure and circulatemode of a kind of manufacturing system and manufacturing process. The manufacturing drives in the mechanism under continuously by ones ownperfect raise on organizing structure and circulating modeand thus to adapt theprocess ofwith ability for the environment .For from descend but the last productproceed together a design and make a craft rules the auto of the distance born producesystem of dynamic state reorganization and product and manufacturing the system tendautomatically excellent provided theories foundation and carry out acondition .Imitate to living a manufacturing to belong to manufacturing science andlife science ofquotthe far good luck is miscellaneous to hand overquot it will produceto the manufacturing industry for 21 centuries huge of influence .机电一体化摘要机电一体化是现代科学技术发展的必然结果本文简述了机电一体化技术的基本概要和发展背景。

软件工程毕业论文文献翻译中英文对照

软件工程毕业论文文献翻译中英文对照学生毕业设计(论文)外文译文学生姓名: 学号专业名称:软件工程译文标题(中英文):Qt Creator白皮书(Qt Creator Whitepaper)译文出处:Qt network 指导教师审阅签名: 外文译文正文:Qt Creator白皮书Qt Creator是一个完整的集成开发环境(IDE)，用于创建Qt应用程序框架的应用。

Qt是专为应用程序和用户界面，一次开发和部署跨多个桌面和移动操作系统。

本文提供了一个推出的Qt Creator和提供Qt开发人员在应用开发生命周期的特点。

Qt Creator的简介Qt Creator的主要优点之一是它允许一个开发团队共享一个项目不同的开发平台(微软Windows?的Mac OS X?和Linux?)共同为开发和调试工具。

Qt Creator的主要目标是满足Qt开发人员正在寻找简单，易用性，生产力，可扩展性和开放的发展需要，而旨在降低进入新来乍到Qt的屏障。

Qt Creator 的主要功能，让开发商完成以下任务: , 快速，轻松地开始使用Qt应用开发项目向导，快速访问最近的项目和会议。

, 设计Qt物件为基础的应用与集成的编辑器的用户界面，Qt Designer中。

, 开发与应用的先进的C + +代码编辑器，提供新的强大的功能完成的代码片段，重构代码，查看文件的轮廓(即，象征着一个文件层次)。

, 建立，运行和部署Qt项目，目标多个桌面和移动平台，如微软Windows，Mac OS X中，Linux的，诺基亚的MeeGo，和Maemo。

, GNU和CDB使用Qt类结构的认识，增加了图形用户界面的调试器的调试。

, 使用代码分析工具，以检查你的应用程序中的内存管理问题。

, 应用程序部署到移动设备的MeeGo，为Symbian和Maemo设备创建应用程序安装包，可以在Ovi商店和其他渠道发布的。

, 轻松地访问信息集成的上下文敏感的Qt帮助系统。

消费者行为心理学中英文外文文献翻译

消费者行为心理学中英文外文文献翻译(含：英文原文及中文译文)英文原文Frontiers of Social PsychologyArie W. Kruglanski 、Joseph P. ForgasFrontiers of Social Psychology is a new series of domain-specific handbooks. The purpose of each volume is to provide readers with a cutting-edge overview of the most recent theoretical, methodological, and practical developments in a substantive area of social psychology, in greater depth than is possible in general social psychology handbooks. The editors and contributors are all internationally renowned scholars whose work is at the cutting-edge of research.Scholarly, yet accessible, the volumes in the Frontiers series are an essential resource for senior undergraduates, postgraduates, researchers, and practitioners, and are suitable as texts in advanced courses in specific subareas of social psychology.Some Social Asp ects of Living in a Consumer SocietyThe following sketches will illustrate that in a consumer society much of the behavior studied by social psychologists relates to consumer stimuli and consumer behavior. Thus, the consumer context provides a rich field for the study of social phenomena and behavior.Consumer Decisions Are UbiquitousWhether we are in the supermarket or not, we are constantly making consumer decisions. We enroll in gyms, use our frequent-flyer miles for a vacation resort, buy health care, choose a restaurant, skip dessert for a healthier lifestyle. In fact, most of our daily decisions do not involve existential decisions such as whom to marry or whether to have children or not, but whether to have tea or coffee, use our credit card or pay cash, or other seemingly trivial decisions. Moreover, many of our daily (consumer) behaviors do not even require intentional decisions. Rather, they may be habitual, such as switching to CNN to get the news or accessing Google when looking up some information. A typical day of a typical person is filled with countless minor consumer decisions or the consequences of previous decisions, starting with the brand of toothpaste in the morning to choosing a movie after work.Consumer Choices Fulfill a Social-Identity FunctionAlthough for most people being a consumer may not be central to their identity, many of their consumer decisions are nevertheless highly identity-relevant insofar as they correspond to a larger set of values and beliefs and express important aspects of the self. Eating a vegetarian diet because one does not want to endorse cruelty to animals and boycotting clothes potentially made by child laborers are some examples. Some people buy a Prius out of environmental concerns; others boycott Japanese cars —such as the Prius —in order to help the local carindustry. In this respect, even the choice between Coke and Pepsi is not necessarily trivial. People who cannot discriminate Coke from Pepsi in a blind test, or who prefer Pepsi, may nevertheless adhere to Coke as a cultural icon. Attempts to change the formula of Coke met with angry protests and opposition. Clearly, consumer products and brands do not only fulfill utilitarian needs (Olson & Mayo, 2000; Shavitt, 1990). In a world of oversupply and differentiating brands, many consumers choose brands in order to express their personality or to affiliate themselves with desired others. They do not simply use a Mac; they are Mac users, and switching to another brand of PC would be akin to treason. From soft drinks to computers, brands may become an ideology. People may also perceive of products as extended selves (Belk, 1988); for example, they may identify with their cars just as they do with pets. Likewise, brands may define social groups. The Harley-Davidson Club is a legendary example; an Internet search revealed clubs for almost every car brand and model. In my hometown, I found a V olkswagen New Beetle Club whose stated purpose is to cultivate contacts between New Beetle Drivers by organizing social events (among others, a visit to a car cemetery). On the road, drivers of the same car model often greet each other. Apparently, driving the same model is sufficient to establish social closeness. Brands, products, and consumption habits not only help to establish social connectivity but also serve as status symbols, defining vertical andhorizontal social boundaries. By using particular brands or consuming specific products, people can express a certain lifestyle or attempt to convey a particular social impression. Subscribing to the opera conveys one’s social position just as going to a monster truck race does. Whether your choice of drink is wine or beer, cappuccino or herbal tea, your order expresses more than merely your taste in beverages.Consumer Choices Affect Social PerceptionGiven that brands and products are part of social expression, it is not surprising that people are judged by the brands and products they use. In particular, products of a social-identity function are used as bases for inferences about a target’s personality traits (Shavitt & Nelson, 2000). Likewise, smoking, food choice and amount of food intake have all been shown to affect social impressions. Depending on the subculture of the perceiver (age, country), different personality traits are assumed in smokers compared with nonsmokers (e.g., Cooper & Kohn, 1989; Jones & Carroll, 1998). Various studies found that eaters of a healthier diet are perceived as more feminine and in general judged more favorably than eaters of unhealthy foods (for a review see V artanian, Herman, & Polivy, 2007). Arguing that a Pepsi drinker is to a Coke drinker what a Capulet was to a Montague is, of course, an exaggeration, but clearly brands may distinguish ingroup from out-group members. Possibly this is most extreme among teenagers, where the brand of jeans is perceived todetermine coolness and popularity. Nevertheless, the phenomenon is not limited to teen culture, as testified by the previous examples of social communities defined by shared brands. In sum, from wet versus dry shaving to driving a Porsche versus a Smart, consumer behavior is used as a cue in person perception. Most likely, such cues also manifest in behavior toward these consumers. Physical attacks on women who wear fur are a most extreme example.Affective Consequences of Consumer BehaviorObviously, consumption and the use of products and services may give pleasure and satisfaction or displeasure and dissatisfaction. People may experience joy from wearing a new sweater or suffer emotional consequences when products or services fail or cause inconvenience. Product use is only one source of affective consumer experiences. The mere act of choosing and acquisition is another. People enjoy or dislike the experience of shopping. They may take pleasure from the freedom of simply choosing between different options (e.g., Botti & Iyengar, 2004), feel overwhelmed and confused by an abundance of options (e.g., Huffman & Kahn, 1998), or feel frustrated by a limited assortment that does not meet their particular needs (e.g., Chernev, 2003). They may experience gratification and a boost in self-esteem from the fact that they can afford a particular consumer lifestyle or grudge the fact that they cannot. Many daily sources of affective experiences involve consumerbehavior in one way or another.The Consumer Context Provides Unique Social InteractionsGranted, we rarely form deep and meaningful relationships with our hairdressers and waiters. Still, the consumer context affords many social interactions over a day. Again, these interactions— even if brief— may constitute a source of affective experiences. The smile of the barista, the compliment from the shop-assistant, and the friendly help from the concierge are just a few examples of how such consumerrelated interactions may make us feel good, worthy, and valued, whereas snappy and rude responses have the opposite effect. Besides, the social roles defined by the consumer context may provide unique opportunities for particular behaviors, interactions, and experiences not inherent in other roles. Being a client or customer makes one expect respect, courtesy, and attendance to one’s needs. For some, this may be the only role in their life that gives them a limited sense of being in charge and having others meet their demands. To give another example, complaining is a form of social interaction that mostly takes place within the consumer context. A search for ―complaint behavior‖ in the PsycI NFO database found that 34 out of 50 entries were studies from the consumer context. (The rest mostly related to health care, which may to some extent also be viewed as consumer context.) Given the importance of the consumer context to social experiences and interactions, it provides a prime opportunity forstudying these social behaviors.•How consumers think, feel, reason, and the psychology of screening for different items (such as brands, products); • Consumer behavior when they shop or make other marketing decisions;•Limits in consumer knowledge or access to information affect decisions and marketing outcomes;•How can marketers adapt and improve their marketing competitiveness and marketing strategies to attract consumers more efficiently?Bergi gives an official definition of consumer behavior: the process and the activities people perform when they research, select, purchase, use, evaluate, and deal with products and services in order to meet their needs. The behavior occurs in a group or an organization where individuals or individuals appear in this context. Consumer behavior includes using and handling products and studying how products are bought. The use of products is generally of great interest to marketers because it may affect how a product is in the best position or how we can encourage increased consumption.The Nicosia model focuses on the relationship between the company and its potential customers. The company communicates with consumers through its marketing messages or advertisements and consumers' reactions to the information they want to buy. Seeing this pattern, we willfind that companies and consumers are interconnected. Companies want to influence consumers. Consumers influence company decisions through their decisions.Consumer sentiment refers to a unique set of emotional reactions to the use of or eliciting a consumer experience in the product, a unique class or relationship of the emotional experience described and expressed (such as joy, anger and fear), such as the structural dimensions of the emotional category or pleasant/unpleasant, Relax/action, or calm/excited. Goods and services are often accompanied by emotional reactions (such as the fear caused by watching a horror movie). Emotional values are often associated with aesthetic choices (such as religion, reason). However, more material and utilitarian products also seem to have emotional value. For example, some foods cause childhood experiences and feel comfortable with them. Izad (1977) developed a method of emotional experience and introduced basic emotions. He uses ten words to distinguish the basic types of emotions: interest, joy, surprise, sadness, anger, disgust, contempt, fear, shame, and guilt. This method has been widely used by consumer research.In order to implement the interpersonal and personal construction in this framework, we use the concept of self-awareness to express the influence of consumer response on society. Self-awareness is defined as the individual's consistent trend to focus directly on inward or outward.This theory identifies two different types of people with self-consciousness. The open self-conscious person pays special attention to other people's views on their outside. The private self-conscious person pays more attention to their inner thoughts and feelings. In this case, we assume that the reputation of consumption may be different based on sensitivity to other people. This proposal is also consistent with previous research. It shows that people with different personal behaviors depend on their sensitivity to interpersonal influences. Dubois and Dikena emphasized that "we believe that the analysis of the direct relationship between consumers and brands is a key to improving understanding of such a market." This original assumption is that of private or The value of the open superior product comes from the inherent social status of these objects. Many existing studies emphasize the role of the role played in the exchange of information about their owners and social relationships.中文译文社会心理学前沿艾瑞·克鲁格兰斯基，约瑟夫·弗加斯社会心理学的前沿是一个新的领域专用手册系列。

袁宗道《论文》原文及翻译译文

袁宗道《论文》原文及翻译译文1、袁宗道《论文》原文及翻译译文袁宗道《论文》原文及翻译袁宗道原文：口舌，代心者也;文章，又代口舌者也。

展转隔碍，虽写得畅显，已恐不如口舌矣，况能如心之所存乎?故孔子论文曰：“辞达而已。

”达不达，文不文之辨也。

唐、虞、三代之文，无不达者。

今人读古书，不即通晓，辄谓古文奇奥，今人下笔不宜平易。

夫时有古今，语言亦有古今，今人所诧谓奇字奥句，安知非古之街谈巷语耶?左氏去古不远，然《传》中字句，未尝肖《书》也。

司马去左亦不远，然《史记》句字，亦未尝肖左也。

至于今日，逆数前汉，不知几千年远矣。

自司马不能同于左氏，而今日乃欲兼同左、马，不亦谬乎?中间历晋、唐，经宋、元，文士非乏，未有公然挦扯古文，奄为己有者。

昌黎好奇偶一为之如《毛颖》等传一时戏剧他文不然也。

空同①不知，篇篇模拟，亦谓“反正②”。

后之文人，遂视为定例，尊若令甲③。

凡有一语不肖古者，即大怒，骂为“野路恶道”。

不知空同模拟，自一人创之，犹不甚可厌。

迨其后一传百，以讹益讹，愈趋愈下，不足观矣。

且空同诸文，尚多己意，纪事述情，往往逼真，其尤可取者，地名官衔，俱用时制。

今却嫌时制不文，取秦汉名衔以文之，观者若不检《一统志》④，几不识为何乡贯矣。

且文之佳恶，不在地名官衔也，史迁之文，其佳处在叙事如画，议论超越;而近说乃云，西京⑤以还，封建宫殿，官师郡邑，其名不雅驯，虽史迁复出，不能成史。

则史迁佳处，彼尚未梦见也，而况能肖史迁也乎?或曰：信如子言，古不必学耶?余曰：古文贵达，学达即所谓学古也。

学其意，不必泥其字句也。

今之圆领方袍，所以学古人之缀叶蔽皮也;今之五味煎熬，所以学古人之茹毛饮血也。

何也?古人之意，期于饱口腹，蔽形体;今人之意，亦期于饱口腹，蔽形体，未尝异也。

彼摘古字句入己著，是无异缀皮叶于衣袂之中，投毛血于肴核之内也。

大抵古人之文，专期于达，而今人之文，专期于不达。

以不达学达，是可谓学古者乎?(取材于袁宗道《论文》)【注】①空同：李梦阳，号空同子，明代文学家。

高速数字混合锁相环频率合成器毕业论文中英文资料对照外文翻译文献综述

中英译文翻译英文：High Speed Digital Hybrid PLL Frequency Synthesizer译文：高速数字混合锁相环频率合成器To get the high-speed, it is necessary to prepare the precise synchronization of the complicated design.In 2001, H. G. Ryu proposed a simplified structure of the DDFS (direct digital frequency synthesizer)-driven PLL for the high switching speed [2].However, there is a problem that the speed of the whole system is limited by PLL.Y. Fouzar proposed a PLL frequency synthesizer of dual loop configuration using frequency-to-voltage converter (FVC) [3].It has a fast switching speed by the PD (phase detector), FVC using output signal of VCO and the proposed coarse tuning controller.However, H/W complexity is increased for the high switching speed.Also, it shows the fast switching characteristic only when the FVC works well.Another method is pre-tuning one which is called DH-PLL in this study [4].It has very high speed switching property, but H/W complexity and power consumption are increased due to digital look-up table (DLT) which is usually implemented by the ROM including the transfer characteristic ofVCO(voltage controlled oscillator).For this reason, this paper proposes a timing synchronization circuit for the rapid frequency synthesis and a very simple DLT replacement digital logic block instead of the complex ROM type DLT for high speed switching and low power consumption. Also, the requisite condition is solved in the proposed method. The fast switching operation at every the frequency synthesis process is verified by the computer circuit simulation.II.DH-PLL synthesizerAs shown in Fig.1, the open-loop synthesizer is a direct frequency synthesis type that VCO 要得到高运行速度,事先做好复杂设计的精确同步是必要的。

液压系统外文文献翻译中英文

外文文献翻译(含：英文原文及中文译文)英文原文Hydraulic systemW Arnold1 IntroductionThe hydraulic station is called a hydraulic pump station and is an independent hydraulic device. It is step by step to supply oil. And control the direction of hydraulic oil flow, pressure and flow, suitable for the host and hydraulic equipment can be separated on the various hydraulic machinery.After the purchase, the user only needs to connect the hydraulic station and the actuator (hydraulic or oil motor) on the mainframe with different tubings. The hydraulic machine can realize various specified actions and working cycles.The hydraulic station is a combination of manifolds, pump units or valve assemblies, electrical boxes, and tank electrical boxes. Each part function is:The pump unit is equipped with a motor and an oil pump, which is the power source of the hydraulic station and can convert mechanical energy into hydraulic oil pressure energy.V alve combination - its plate valve is mounted on the vertical plate, and the rear plate is connected with the same function as the manifold.Oil manifolds - assembled from hydraulic valves and channel bodies. It regulates hydraulic oil pressure, direction and flow.Box--a semi-closed container for plate welding. It is also equipped with an oil screen, an air filter, etc., which is used for cooling and filtering of oil and oil.Electrical box - divided into two types: one is to set the external lead terminal board; one is equipped with a full set of control appliances.The working principle of the hydraulic station: The motor drives the oil pump to rotate, then the pump sucks oil from the oil tank and supplies oil, converts the mechanical energy into hydraulic pressure energy, and the hydraulic oil passes through the manifold (or valve assembly) to adjust the direction, pressure and flow and then passes through the external tube. The way to the hydraulic cylinder or oil motor in the hydraulic machinery, so as to control the direction of the hydraulic motor, the strength of the speed and speed, to promote all kinds of hydraulic machinery to do work.(1) Development history of hydraulic pressureThe development history of hydraulics (including hydraulic power, the same below), pneumatics, and seals industry in China can be roughly divided into three stages, namely: the starting stage in the early 1950s to the early 60s; and the professional in the 60s and 70s. The growth stage of the production system; the 80-90's is a stage of rapid development. Among them, the hydraulic industry began in the early 1950s with thedevelopment of hydraulic machines such as Grinding Machines, broaching machines, and profiling lathes, which were produced by the machine tool industry. The hydraulic components were produced by the hydraulic workshop in the machine tool factory, and were produced for self use. After entering the 1960s, the application of hydraulic technology was gradually promoted from the machine tool to the agricultural machinery and engineering machinery. The original hydraulic workshop attached to the main engine plant was independent and became a professional manufacturer of hydraulic components. In the late 1960s and early 1970s, with the continuous development of mechanization of production, particularly in the provision of highly efficient and automated equipment for the second automobile manufacturing plant, the hydraulic component manufacturing industry witnessed rapid development. The batch of small and medium-sized enterprises also began to become specialized manufacturers of hydraulic parts. In 1968, the annual output of hydraulic components in China was close to 200,000 pieces. In 1973, in the fields of machine tools, agricultural machinery, construction machinery and other industries, the professional factory for the production of hydraulic parts has grown to over 100, and its annual output exceeds 1 million pieces. Such an independent hydraulic component manufacturing industry has taken shape. At this time, the hydraulic product has evolved from the original imitation Su product intoa combination of imported technology and self-designed products. The pressure has been developed towards medium and high pressures, and electro-hydraulic servo valves and systems have been developed. The application of hydraulics has been further expanded. The pneumatic industry started a few years later than hydraulics, and it was only in 1967 that it began to establish a professional pneumatic components factory. Pneumatic components began to be manufactured and sold as commodities. Its sealing industry including rubber seals, flexible graphite seals, and mechanical seals started from the production of common O-rings, oil seals, and other extruded rubber seals and asbestos seal products in the early 1950s. In the early 1960s, it began to develop and produce flexible products. Graphite seals and mechanical seals and other products. In the 1970s, a batch of batches of professional production plants began to be established one after another in the systems of the former Ministry of Combustion, the Ministry of Agriculture, and the Ministry of Agricultural Machinery, formally forming the industry, which laid the foundation for the development of the seal industry.In the 1980s, under the guidance of the national policy of reform and opening up, with the continuous development of the machinery industry, the contradiction between the basic components lags behind the host computer has become increasingly prominent and caused the attention of all relevant departments. To this end, the former Ministry of Machinesestablished the General Infrastructure Industry Bureau in 1982, and unified the original pneumatic, hydraulic, and seal specialties that were scattered in the industries of machine tools, agricultural machinery, and construction machinery, etc. The management of a piece of office, so that the industry in the planning, investment, the introduction of technology and scientific research and development and other aspects of the basic parts of the bureau's guidance and support. This has entered a period of rapid development, it has introduced more than 60 foreign advanced technology, of which more than 40 hydraulic, pneumatic 7, after digestion and absorption and technological transformation, are now mass production, and has become the industry's leading products . In recent years, the industry has intensified its technological transformation. From 1991 to 1998, the total investment of national, local, and corporate self-raised funds totaled about 2 billion yuan, of which more than 1.6 billion were hydraulic. After continuous technological transformation and technological breakthroughs, the technical level of a group of major enterprises has been further improved, and technological equipment has also been greatly improved, laying a good foundation for forming a high starting point, specialization, and mass production. In recent years, under the guidance of the principle of common development of multiple ownership systems in the country, various small and medium-sized enterprises with different ownership have rapidly emerged and haveshown great vitality. With the further opening up of the country, foreign-funded enterprises have developed rapidly, which plays an important role in raising industry standards and expanding exports. So far China has established joint ventures with famous manufacturers in the United States, Germany, Japan and other countries or directly established piston pumps/motors, planetary speed reducers, hydraulic control valves, steering gears, hydraulic systems, hydrostatic transmissions, and hydraulic components. The company has more than 50 manufacturing enterprises such as castings, pneumatic control valves, cylinders, gas processing triplets, rubber seals, and mechanical seals, and has attracted more than 200 million U.S. dollars in foreign capital.(2) Current statusBasic profileAfter more than 40 years of hard work, China's hydraulics, pneumatics and seals industry has formed a complete industrial system with a certain level of production capacity and technical level. According to the statistics of the third n ational industrial census in 1995, China’s state-owned, privately-owned, cooperative, village-run, individual, and “funded enterprises” have annual sales income of more than 1 million yuan in hydraulic, pneumatic, and seal industrial townships and above. There are a total of more than 1,300 companies, including about 700 hydraulics, and about 300 pneumatic and sealing parts. According to thestatistics of the international industry in 1996, the total output value of the hydraulic industry in China was about 2.448 billion yuan, accounting for the 6th in the world; the total output value of the pneumatic industry was about 419 million yuan, accounting for the world’s10 people.2. Current supply and demand profileWith the introduction of technology, independent development and technological transformation, the technical level of the first batch of high-pressure plunger pumps, vane pumps, gear pumps, general hydraulic valves, oil cylinders, oil-free pneumatic components and various types of seals has become remarkable. Improve, and can be stable mass production, provide guarantees for all types of host to improve product quality. In addition, certain achievements have also been made in the aspects of CAD, pollution control, and proportional servo technology for hydraulic pneumatic components and systems, and have been used for production. So far, the hydraulic, pneumatic and seal products have a total of about 3,000 varieties and more than 23,000 specifications. Among them, there are about 1,200 types of hydraulic pressure, more than 10,000 specifications (including 60 types of hydrodynamic products, 500 specifications); about 1350 types of pneumatic, more than 8,000 specifications; there are also 350 types of rubber seals, more than 5000 The specifications are now basically able to adapt to the general needs ofvarious types of mainframe products. The matching rate for major equipment sets can reach more than 60%, and a small amount of exports has started.In 1998, the domestic production of hydraulic components was 4.8 million pieces, with sales of about 2.8 billion yuan (of which mechanical systems accounted for 70%); output of pneumatic components was 3.6 million pieces, and sales were about 550 million yuan (including mechanical systems accounting for about 60%) The production of seals is about 800 million pieces, and the sales volume is about 1 billion yuan (including about 50% of mechanical systems). According to the statistics of the annual report of the China Hydraulic and Pneumatic Sealing Industry Association in 1998, the production and sales rate of hydraulic products was 97.5% (101% of hydraulic power), 95.9% of air pressure, and 98.7% of seal. This fully reflects the basic convergence of production and sales.Although China's hydraulic, pneumatic and sealing industries have made great progress, there are still many gaps compared with the development needs of the mainframe and the world's advanced level, which are mainly reflected in the variety, performance and reliability of products. . Take hydraulic products as an example, the product varieties are only 1/3 of the foreign country, and the life expectancy is 1/2 of that of foreign countries. In order to meet the needs of key hosts, imported hosts, and majortechnical equipment, China has a large number of imported hydraulic, pneumatic, and sealing products every year. According to customs statistics and relevant data analysis, in 1998, the import volume of hydraulic, pneumatic and seal products was about 200 million U.S. dollars, of which the hydraulic pressure was about 140 million U.S. dollars, the pneumatics were 30 million U.S. dollars, and the seal was about 0.3 billion U.S. dollars. The year is slightly lower. In terms of amount, the current domestic market share of imported products is about 30%. In 1998, the total demand for hydraulic parts in the domestic market was about 6 million pieces, and the total sales volume was 4 billion yuan; the total demand for pneumatic parts was about 5 million pieces, and the total sales volume was over 700 million yuan; the total demand for seals was about 1.1 billion yuan. Pieces, total sales of about 1.3 billion yuan. (3) Future developments1. The main factors affecting development(1) The company's product development capability is not strong, and the level and speed of technology development can not fully meet the current needs for advanced mainframe products, major technical equipment and imported equipment and maintenance;(2) Many companies have lagged behind in manufacturing process, equipment level and management level, and their sense of quality is not strong, resulting in low level of product performance, unstable quality,poor reliability, and insufficiency of service, and lack of user satisfaction. And trusted branded products;(3) The degree of professional specialization in the industry is low, the power is scattered, the duplication of the low level is serious, the product convergence between the region and the enterprise leads to blind competition, and the prices are reduced each other, thus the efficiency of the enterprise is reduced, the funds are lacking, and the turnover is difficult. Insufficient investment in development and technological transformation has severely restricted the overall level of the industry and its competitive strength.(4) When the degree of internationalization of the domestic market is increasing, foreign companies have gradually entered the Chinese market to participate in competition, coupled with the rise of domestic private, cooperative, foreign-funded, and individual enterprises, resulting in increasing impact on state-owned enterprises. .2. Development trendWith the continuous deepening of the socialist market economy, the relationship between supply and demand in the hydraulic, pneumatic and sealed products has undergone major changes. The seller market characterized by “shortage” has basically become a buyer’s market characterized by “structured surplus”. Replaced by. From the perspective of overall capacity, it is already in a trend of oversupply, and in particular,general low-grade hydraulic, pneumatic and seals are generally oversupply; and like high-tech products with high technological content and high value and high value-added products that are urgently needed by the host, Can not meet the needs of the market, can only rely on imports. After China's entry into the WTO, its impact may be greater. Therefore, during the “10th Five-Y ear Plan” period, the growth of the industry’s output value must not only rely on the growth of quantity. Instead, it should focus on the structural contradiction of the industry and intensify efforts to adjust the industrial structure and product structure. It should be based on the improvement of quality. Product technology upgrades in order to adapt to and stimulate market demand, and seek greater development.2. Hydraulic application on power slide(1) Introduction of Power Sliding TableUsing the binding force curve diagram and the state space analysis method to analyze and study the sliding effect and the smoothness of the sliding table of the combined machine tool, the dynamics of the hydraulic drive system of the sliding table—the self-regulating back pressure regulating system are established. mathematical model. Through the digital simulation system of the computer, the causes and main influencing factors of the slide impact and the motion instability are analyzed. What kind of conclusions can be drawn from those, if we canreasonably design the structural dimensions of hydraulic cylinders and self-regulating back pressure regulators ——The symbols used in the text are as follows:s 1 - flow source, that is, the flow rate of the governor valve outlet;S el —— sliding friction of the sliding table;R - the equivalent viscous friction coefficient of the slide;I 1 - quality of slides and cylinders;12 - self-adjusting back pressure valve core quality;C 1, c 2 - liquid volume without cylinder chamber and rod chamber;C 2 - Self-adjusting back pressure valve spring compliance;R 1, R2 - Self-adjusting back pressure valve damping orifice fluid resistance;R 9 - Self-adjusting back pressure valve valve fluid resistance;S e2——initial pre-tightening force of self-adjusting back pressure valve spring;I 4, I5 - Equivalent liquid sense of the pipeline;C 5, C 6 - equivalent liquid capacity of the pipeline;R 5, R7 - Equivalent liquid resistance of the pipeline;V 3, V4 - cylinder rodless cavity and rod cavity volume;P 3, P4—pressure of the rodless cavity and rod cavity of the cylinder;F - the slide bears the load;V - speed of slide motion;In this paper, the power bond diagram and the state space splitting method are used to establish the system's motion mathematical model, and the dynamic characteristics of the slide table can be significantly improved.In the normal operation of the combined machine tool, the magnitude of the speed of the slide, its direction and the load changes it undergoes will affect its performance in varying degrees. Especially in the process of work-in-process, the unsteady movement caused by the advancing of the load on the slide table and the cyclical change of the load will affect the surface quality of the workpiece to be machined. In severe cases, the tool will break. According to the requirements of the Dalian Machine Tool Plant, the author used the binding force curve diagram and the state space analysis method to establish a dynamic mathematical model of a self-adjusting back pressure and speed adjustment system for the new hydraulic drive system of the combined machine tool slide. In order to improve the dynamic characteristics of the sliding table, it is necessary to analyze the causes and main influencing factors of the impetus and movement of the sliding table. However, it must pass the computer's digital simulation and the final results obtained from the research.(2) Dynamic Mathematical ModelThe working principle diagram of the self-adjusting back pressure speedregulation system of the combined machine tool slide hydraulic drive system is shown in the figure. This system is used to complete the work-cycle-stop-rewind. When the sliding table is working, the three-position four-way reversing valve is in the illustrated position. The oil supply pressure of the oil pump will remain approximately constant under the effective action of the overflow valve, and the oil flow passes through the reversing valve and adjusts the speed. The valve enters the rodless chamber of the cylinder to push the slide forward. At the same time, the pressurized oil discharged from the rod chamber of the cylinder will flow back to the tank through the self-regulating back pressure valve and the reversing valve. During this process, there was no change in the operating status of both the one-way valve and the relief valve. The complex and nonlinear system of the hydraulic drive system of the self-adjusting back pressure governor system is a kind of self-adjusting back-pressure governor system. To facilitate the study of its dynamic characteristics, a simple and reasonable dynamic mathematical model that only considers the main influencing factors is established. Especially important [1][2]. From the theoretical analysis and the experimental study, we can see that the system process time is much longer than the process time of the speed control valve. When the effective pressure bearing area of the rodless cavity of the fuel tank is large, the flow rate at the outlet of the speed control valve is instantaneous. The overshoot is reflected in thesmall change in speed of the slide motion [2]. In order to further broaden and deeply study the dynamic characteristics of the system so that the research work can be effectively performed on a miniature computer, this article will further simplify the original model [2], assuming that the speed control valve is output during the entire system pass. When the flow is constant, this is considered to be the source of the flow. The schematic diagram of the dynamic model structure of this system is shown in Fig. 2. It consists of a cylinder, a sliding table, a self-adjusting back pressure valve, and a connecting pipe.The power bond graph is a power flow graph. It is based on the transmission mode of the system energy, based on the actual structure, and uses the centralized parameters to represent the role of the subsystems abstractly as a resistive element R, a perceptual element I, and a capacitive element. Three kinds of role of C. Using this method, the physical concept of modeling is clear, and combined with the state-space analysis method, the linear system can be described and analyzed more accurately. This method is an effective method to study the dynamic characteristics of complex nonlinear systems in the time domain. According to the main characteristics of each component of the self-adjusting back pressure control system and the modeling rules [1], the power bond diagram of the system is obtained. The upper half of each key in the figure represents the power flow. The two variables that makeup the power are the force variables (oil pressure P and force F) and the flow variables (flow q and velocity v). The O node indicates that the system is connected in parallel, and the force variables on each key are equal and the sum of the flow variables is zero; 1 The nodes represent the series connection in the system, the flow variables on each key are equal and the sum of the force variables is Zero. TF denotes a transformer between different energy forms. The TF subscripted letter represents the conversion ratio of the flow variable or the force variable. The short bar on the key indicates the causal relationship between the two variables on the key. The full arrow indicates the control relationship. There are integral or differential relationships between the force and flow variables of the capacitive and perceptual elements in the three types of action elements. Therefore, a complex nonlinear equation of state with nine state variables can be derived from Fig. 3 . In this paper, the research on the dynamic characteristics of the sliding table starts from the two aspects of the slide's hedging and the smoothness of the motion. The fourth-order fixed-length Runge-Kutta is used for digital simulation on the IBM-PC microcomputer.(3) Slide advanceThe swaying phenomenon of the slide table is caused by the sudden disappearance of the load acting on the slide table (such as drilling work conditions). In this process, the table load F, the moving speed V, and thepressure in the two chambers of the cylinder P3 and P4 can be seen from the simulation results in Fig. 4. When the sliding table moves at a uniform speed under the load, the oil pressure in the rodless cavity of the oil cylinder is high, and a large amount of energy is accumulated in the oil. When the load suddenly disappears, the oil pressure of the cavity is rapidly reduced, and the oil is rapidly reduced. When the high-pressure state is transferred to the low-pressure state, a lot of energy is released to the system, resulting in a high-speed forward impact of the slide. However, the front slide of the sliding table causes the pressure in the rod cavity of the oil cylinder to cause the back pressure to rise, thereby consuming part of the energy in the system, which has a certain effect on the kicking of the slide table. We should see that in the studied system, the inlet pressure of the self-adjusting back pressure valve is subject to the comprehensive effect of the two-chamber oil pressure of the oil cylinder. When the load suddenly disappears, the pressure of the self-adjusting back pressure valve rapidly rises and stably exceeds the initial back pressure value. It can be seen from the figure that self-adjusting back pressure in the speed control system when the load disappears, the back pressure of the cylinder rises more than the traditional speed control system, so the oil in the rod cavity of the cylinder absorbs more energy, resulting in the amount of forward momentum of the slide It will be about 20% smaller than traditionalspeed control systems. It can be seen from this that the use of self-adjusting back-gear speed control system as a drive system slider has good characteristics in suppressing the forward punch, in which the self-adjusting back pressure valve plays a very large role.(4) The smoothness of the slideWhen the load acting on the slide changes periodically (such as in the case of milling), the speed of the slide will have to fluctuate. In order to ensure the processing quality requirements, it must reduce its speed fluctuation range as much as possible. From the perspective of the convenience of the discussion of the problem, assume that the load changes according to a sine wave law, and the resulting digital simulation results are shown in Figure 5. From this we can see that this system has the same variation rules and very close numerical values as the conventional speed control system. The reason is that when the change of the load is not large, the pressure in the two chambers of the fuel tank will not have a large change, which will eventually lead to the self-regulating back pressure valve not showing its effect clearly.(5) Improvement measuresThe results of the research show that the dynamic performance of a sliding table with self-regulating back pressure control system as a drive system is better than that of a traditional speed control system. To reduce the amount of kick in the slide, it is necessary to rapidly increase the backpressure of the rod cavity when the load disappears. To increase the smoothness of the sliding table, it is necessary to increase the rigidity of the system. The main measure is to reduce the volume of oil. From the system structure, it is known that the cylinder has a large volume between the rod cavity and the oil discharge pipe, as shown in Fig. 6a. Its existence in terms of delay and attenuation of the self-regulating back pressure valve function, on the other hand, also reduces the rigidity of the system, it will limit the further improvement of the propulsion characteristics and the smoothness of the motion. Thus, improving the dynamic characteristics of the sliding table can be handled by two methods: changing the cylinder volume or changing the size of the self-regulating back pressure valve. Through the simulation calculation of the structural parameters of the system and the comparison of the results, it can be concluded that the ratio of the volume V4 between the rod cavity and the oil discharge pipe to the volume V3 between the rodless cavity and the oil inlet pipe is changed from 5.5 to 5.5. At 1 oclock, as shown in the figure, the diameter of the bottom end of the self-adjusting back pressure valve is increased from the original 10mm to 13mm, and the length of the damper triangle groove is reduced from the original lmm to 0.7mm, which will enable the front of the slide table. The impulse is reduced by 30%, the transition time is obviously shortened, and the smoothness of the slide motion will also be greatly improved.中文译文液压系统W Arnold1. 绪论液压站称液压泵站,是独立的液压装置。

食品科学论文外文翻译中文译文

连续色谱和电喷雾电离质谱分析法对草鱼肌肉水解物的抗氧化肽的纯化和鉴定任娇燕a,赵眸明a,*, John Shi b,王金水a,江月明c,催春a，Yukio Kakuda a ,Sophia Jun Xue ba轻工与食品科学学院，中国科技大学，广州510640，中国b圭尔夫食品研究中心，农业和农业食品,加拿大圭尔夫，安大略省，加拿大N1G5C9c华南植物园，中国科学院研究所，广州，乐意居510650，中国d食品科学研发部，圭尔夫大学，圭尔夫，安大略省,加拿大N1G2W12007年5月9日收到，2007年11月5日收到修订表格，2007年11月7日接受。

摘要用多种蛋白酶（木瓜蛋白酶，菠萝蛋白酶，牛胰酶6.0，中性蛋白酶为1.5mg和碱性蛋白酶2.4L）水解草鱼肌肉以提取抗氧化肽。

用羟自由基的清除能力和抑制脂质过氧化活性的方法来评估水解能力。

准备过程中发现，用2.4L碱性蛋白酶的水解具有最高的抗氧化活性。

使用超滤和连续的色谱法来纯化，包括离子交换色谱法，多层线圈高速逆流色谱法，凝胶过滤色谱法。

纯化的多肽，作为一种强有力的抗氧化剂，可以使用在线RP-HPLC的电喷雾电离质谱确定丝氨酸-赖氨酸-色氨酸- 谷氨酸-脯氨酸-苯丙氨酸- 缬氨酸（966.3 Da）。

当然，才发现基本肽比酸性或中性肽有更大的清除羟自由基的能力，水解的疏水肽比亲水性肽贡献更多的抗氧化活动。

此外，氨基酸中其抗氧化活性的肽序列可能发挥重要作用。

关键词草鱼肌肉抗氧化肽，高速逆流色谱，电喷雾电离质谱分析。

1介绍氧化在所有活的生物体中都是一种重要的反应。

氧化代谢过程中自由基和其他活性氧（ROS）的形成是不可避免。

这些活性自由基，起到重要的信号转导作用（汉考克，Desikan，奥尼尔，2001年）。

然而，过剩的自由基对生物组织和食品能造成破坏性的影响（王，赵，赵江，2007）。

在所有ROS中，羟基自由基被认为是最活泼的，并能在接触到活细胞的过程中破坏几乎任何化合物（卡斯特罗弗里曼，2001）。

顺应论视角下学术论文翻译(英文版)

Structural Objects of Adaptabilityin E-C Translation of Academic ThesisAdaptation Theory thinks that “... using language must consist of the continuous making of linguistic choices, consciously or unconsciously...” (Versehueren, 2000: 55-56) Versehueren points out that the process of making-choice can be comprehended on three linguistic properties -- variability, negotiability and adaptability. Adaptability can be viewed from four perspectives, namely contextual correlates of adaptability, structural objects of adaptability, dynamic adaptability and salience of adaptability process. (Versehueren, 1999: 65-66) This passage will analyze the translation of academic thesis mainly from the perspective of structural objects of adaptability.Structural objects of adaptability means making choices at various layers of linguistic structure including sound, word, syntax, cold, style and chapter. In this thesis, the author will mainly analyze E-C translation of academic thesis from the perspective of structural objects of adaptability.1 Adaptation at the Lexical LevelIn order to achieve better the informative and communicative function of the text, we need to make adaptability in the process of translation. At lexical level, the translator needs to understand correctly the meaning of words combining specific contexts and also convey the meaning in appropriate way of expression.1.1 Transformation of Lexical MeaningTransformation of lexical meaning means the meaning of the word can be transformed into another one, with one as literal meaning in the dictionary and the other one as specific meaning considering specific context. (Yang Man, 2015) In the process of translation, the translator should comprehend the meaning of the word combining the context and choose the most suitable expression to convey the meaning. Adaptation at lexical level conforms to the reading habit of target reader so as to improve reading experience.ST1 Hume interprets our tendency to assign identity through time as a "natural propension,"TT1休谟把我们确定长期身份的倾向解释为一种“自然天性”ST2 pension" to ascribe identity where evidence shows diversity "is so great,"TT2 迹象呈现多样性时，确定身份的“倾向”“极大”Analysis: Common meaning of “assign” in the dictionary is “distribute, attribute”. In the text, we can see a paragraph explaining that people start to investigate question of identity “what makes an individual the same through time despite partial changes” and we “constructs experience to conform to our modes of cognition”. Here we know the “assign identity” means we “determine identity”. For example, we may assign identity to a “dog” saying “this is a dog”, which means we are also determining identity for it. Therefore, the word “assign”is translated as “确定”. So it is the same as the translation of the word “ascribe”. In the dictionary it means “be caused by”or “make sb possess”. In the context, “ascribe” has the same meaning as “assign” so it is translated as “确定” as well. By choosing the best expression of a word, we convey the meaning of the word correctly and improve the reader’s understanding.ST3 the factors that enter into constructing these fictions become a topic of cognitive science, TT3 而构建想象涉及的多种因素成为认知科学的主题。

毕业设计论文翻译（译文+原文）

Hacking tricks toward security on network environments Tzer-Shyong Chen1, Fuh-Gwo Jeng 2, and Yu-Chia Liu 11 Department of Information Management, Tunghai University, Taiwan2 Department of Applied Mathematics, National Chiayi University, TaiwanE-Mail:****************.edu.twAbstractMounting popularity of the Internet has led to the birth of Instant Messaging, an up-and-coming form of Internet communication. Instant Messaging is very popular with businesses and individuals since it has instant communication ability. As a result, Internet security has become a pressing and important topic for discussion. Therefore, in recent years, a lot of attention has been drawn towards Internet security and the various attacks carried out by hackers over the Internet. People today often handle affairs via the Internet. For instance, instead of the conventional letter, they communicate with others by e-mails; they chat with friends through an instant messenger; find information by browsing websites instead of going to the library; perform e-commerce transactions through the Internet, etc. Although the convenience of the Internet makes our life easier, it is also a threat to Internet security. For instance, a business email intercepted during its transmission may let slip business confidentiality; file transfers via instant messengers may also be intercepted, and then implanted with backdoor malwares; conversations via instant messengers could be eavesdropped. Furthermore, ID and password theft may lose us money when using Internet bank service. Attackers on the Internet use hacking tricks to damage systems while users are connected to the Internet. These threats along with possible careless disclosure of business information make Instant Messaging a very unsafe method of communication for businesses. The paper divides hacking tricks into three categories: (1) Trojan programs that share files via instant messenger. (2) Phishing or fraud via e-mails. (3) Fake Websites. Keywords:Hacking tricks, Trojan programs, Phishing, Firewall, Intrusion detection system.1. IntroductionIncreasingly more people are using instant messengers such as MSN Messenger, Yahoo! Messenger, ICQ, etc as the media of communication. These instant messengers transmit alphanumeric message as well as permit file sharing. During transfer, a file may be intercepted by a hacker and implanted with backdoor malware. Moreover, the e-mails users receive every day may include Spam, advertisements, and fraudulent mail intended to trick uninformed users. Fake websites too are prevalent. Websites which we often visit could be counterfeited by imitating the interface and the URL of the original, tricking users. The paper classifies hacking tricks into three categories which are explained in the following sections.2. Hacking TricksThe paper divides hacking tricks into three categories: (1) Trojan programs that share files via instant messenger. (2) Phishing (3) Fake Websites.2.1 Trojan programs that share files via instant messengerInstant messaging allows file-sharing on a computer [9]. All present popular instant messengers have file sharing abilities, or allow users to have the above functionality by installing patches or plug-ins; this is also a major threat to present information security. These communication softwares also makeit difficult for existing hack prevention methods to prevent and control information security. Therefore, we shall discuss how to control the flow of instant messages and how to identify dangerous user behavior.Hackers use instant communication capability to plant Trojan program into an unsuspected program; the planted program is a kind of remotely controlled hacking tool that can conceal itself and is unauthorized. The Trojan program is unknowingly executed, controlling the infected computer; it can read, delete, move and execute any file on the computer. The advantages of a hacker replacing remotely installed backdoor Trojan programs [1] with instant messengers to access files are:When the victim gets online, the hacker will be informed. Thus, a hacker can track and access the infected computer, and incessantly steal user information.A hacker need not open a new port to perform transmissions; he can perform his operations through the already opened instant messenger port.Even if a computer uses dynamic IP addresses, its screen name doesn’t change.Certain Trojan programs are designed especially for instant messengers. These Trojans can change group settings and share all files on the hard disk of the infected computer. They can also destroy or modify data, causing data disarray. This kind of program allows a hacker access to all files on an infected computer, and thus poses a great threat to users. The Trojan program takes up a large amount of the resources of the computer causing it to become very slow and often crashes without a reason.Trojan programs that access a user computer through an instant messenger are probably harder to detect than classic Trojan horse programs. Although classic Trojan intrudes a computer by opening a listening or outgoing port which is used to connect toa remote computer, a desktop firewall can effectively block such Trojans. Alternatively, since it is very difficult for the server’s firewall to spot intrusion by controlling an instant messenger’s flow, it is extremely susceptible to intrusion.Present Trojan programs have already successfully implemented instant messengers. Some Trojan programs are Backdoor Trojan, AIMVision, and Backdoor. Sparta.C. Backdoor Trojans use ICQ pager to send messages to its writer. AIMVision steals AIM related information stored in the Windows registry, enabling a hacker to setup an AIM user id. Backdoor. Sparta.C uses ICQ to communicate with its writer and opens a port on an infected host and send its IP Address to the hacker, and at the same time attempts to terminate the antivirus program or firewall of the host.2.1.1 Hijacking and ImpersonationThere are various ways through which a hacker can impersonate other users [7]. The most commonly used method is eavesdropping on unsuspecting users to retrieve user accounts, passwords and other user related information.The theft of user account number and related information is a very serious problem in any instant messenger. For instance, a hacker after stealing a user’s information impersonate the user; the user’s contacts not knowing that the user’s account has been hacked believe that the person they’re talking to is the user, and are persuaded to execute certain programs or reveal confidential information. Hence, theft of user identity not only endangers a user but also surrounding users. Guarding against Internet security problems is presently the focus of future research; because without good protection, a computer can be easily attacked, causing major losses.Hackers wishing to obtain user accounts may do so with the help of Trojans designed to steal passwords. If an instant messenger client stores his/her password on his/her computer, then a hacker can send a Trojan program to the unsuspecting user. When the user executes the program, the program shall search for the user’s password and send it to the hacker. There are several ways through which a Trojan program can send messages back to the hacker. The methods include instant messenger, IRC, e-mails, etc.Current four most popular instant messengers are AIM, Yahoo! Messenger, ICQ, and MSN Messenger, none of which encrypts its flow. Therefore, a hackercan use a man-in-the-middle attack to hijack a connection, then impersonate the hijacked user and participate in a chat-session. Although difficult, a hacker can use the man-in-the-middle attack to hijack the connection entirely. For example, a user may receive an offline message that resembles that sent by the server, but this message could have been sent by the hacker. All at once, the user could also get disconnected to the server. Furthermore, hackers may also use a Denial of Service (DoS) tool or other unrelated exploits to break the user’s connection. However, the server keeps the connection open, and does not know that the user has been disconnected; thus allowing the hacker to impersonate the user. Moreover, since the data flow is unencrypted and unauthenticated, a hacker can use man-in-the-middle attacks that are similar to that of ARP fraud to achieve its purpose.2.1.2 Denial of Service (DoS)There are many ways through which a hacker can launch a denial of service (DoS) attack [2] on an instant messenger user. A Partial DoS attack will cause a user end to hang, or use up a large portion of CPU resources causing the system to become unstable.Another commonly seen attack is the flooding of messages to a particular user. Most instant messengers allow the blocking of a particular user to prevent flood attacks. However, a hacker can use tools that allow him to log in using several different identities at the same time, or automatically create a large number of new user ids, thus enabling a flood attack. Once a flood attack begins, even if the user realizes that his/her computer has been infected, the computer will not be able to respond. Thus, the problem cannot be solved by putting a hacker’s user id on the ignore list of your instant messenger.A DoS attack on an instant messenger client is only a common hacking tool. The difficulty of taking precautions against it could turn this hacking tool into dangerous DoS type attacks. Moreover, some hacking tools do not just cause an instant messenger client to hang, but also cause the user end to consume large amount of CPU time, causing the computer to crash.2.1.3 Information DisclosureRetrieving system information through instant messenger users is currently the most commonly used hacking tool [4]. It can effortlessly collect user network information like, current IP, port, etc. IP address retriever is an example. IP address retrievers can be used to many purposes; for instance, a Trojan when integrated with an IP address retriever allows a hacker to receive all information related to the infected computer’s IP address as soon as the infected computer connects to the internet. Therefore, even if the user uses a dynamic IP address, hackers can still retrieve the IP address.IP address retrievers and other similar tools can also be used by hackers to send data and Trojans to unsuspecting users. Hackers may also persuade unsuspecting users to execute files through social engineering or other unrelated exploits. These files when executed search for information on the user’s computer and sends them back to the hacker through the instant messenger network.Different Trojan programs were designed for different instant messaging clients. For example, with a user accounts and password stealing Trojans a hacker can have full control of the account once the user logs out. The hacker can thus perform various tasks like changing the password and sending the Trojan program to all of the user’s contacts.Moreover, Trojans is not the only way through which a hacker can cause information disclosure. Since data sent through instant messengers are unencrypted, hackers can sniff and monitor entire instant messaging transmissions. Suppose an employee of an enterprise sends confidential information of the enterprise through the instant messenger; a hacker monitoring the instant messaging session can retrieve the data sent by the enterprise employee. Thus, we must face up to the severity of the problem.2.2 PhishingThe word “Phishing” first appeared in 1996. It is a variant of ‘fishing’, and formed by replacing the ‘f’ in ‘fishing’ with ‘ph’ from phone. It means tricking users of their money through e-mails.Based on the statistics of the Internet Crime Complaint Center, loss due to internet scam was as high as $1.256 million USD in 2004. The Internet Crime Complaint Center has listed the above Nigerian internet scam as one of the ten major internet scams.Based on the latest report of Anti-Phishing Working Group (APWG) [8], there has been a 28% growth of Phishing scams in the past 4 months, mostly in the US and in Asia. Through social engineering and Trojans, it is very difficult for a common user to detect the infection.To avoid exploitation of your compassion, the following should be noted:(1)When you need to enter confidentialinformation, first make sure that theinformation is entered via an entirely secureand official webpage. There are two ways todetermine the security of the webpage:a.The address displayed on the browserbegins with https://, and not http://. Payattention to if the letter ‘s’ exists.b.There is a security lock sign on the lowerright corner of the webpage, and whenyour mouse points to the sign, a securitycertification sign shall appear.(2)Consider installing a browser security softwarelike SpoofStick which can detect fake websites.(3)If you suspect the received e-mail is a Phishinge-mail, do not open attachments attached to theemail. Opening an unknown attachment couldinstall malicious programs onto your computer.(4)Do not click on links attached to your emails. Itis always safer to visit the website through theofficial link or to first confirm the authenticityof the link. Never follow or click on suspiciouslinks in an e-mail. It is advisable to enter theURL at the address bar of the web browser,and not follow the given link.Generally speaking, Phishing [3] [5] is a method that exploits people’s sympathy in the form of aid-seeking e-mails; the e-mail act as bait. These e-mails usually request their readers to visit a link that seemingly links to some charitable organization’s website; but in truth links the readers to a website that will install a Trojan program into the reader’s computer. Therefore, users should not forward unauthenticated charity mails, or click on unfamiliar links in an e-mail. Sometimes, the link could be a very familiar link or an often frequented website, but still, it would be safer if you’d type in the address yourself so as to avoid being linked to a fraudulent website. Phisher deludes people by using similar e-mails mailed by well-known enterprises or banks; these e-mails often asks users to provide personal information, or result in losing their personal rights; they usually contain a counterfeit URL which links to a website where the users can fillin the required information. People are often trapped by phishing due to inattentionBesides, you must also be careful when using a search engine to search for donations and charitable organizations.2.3 Fake WebsitesFake bank websites stealing account numbers and passwords have become increasingly common with the growth of online financial transactions. Hence, when using online banking, we should take precautions like using a secure encrypted customer’s certificate, surf the net following the correct procedure, etc.There are countless kinds of phishing baits, for instance, messages that say data expired, data invalid, please update data, or identity verification intended to steal account ID and matching password. This typeof online scam is difficult for users to identify. As scam methods become finer, e-mails and forged websites created by the impostor resemble their original, and tremendous losses arise from the illegal transactions.The following are methods commonly used by fake websites. First, the scammers create a similar website homepage; then they send out e-mails withenticing messages to attract visitors. They may also use fake links to link internet surfers to their website. Next, the fake website tricks the visitors into entering their personal information, credit card information or online banking account number and passwords. After obtaining a user’s information, the scammers can use the information to drain the bank accounts, shop online or create fake credit cards and other similar crimes. Usually, there will be a quick search option on these fake websites, luring users to enter their account number and password. When a user enters their account number and password, the website will respond with a message stating that the server is under maintenance. Hence, we must observe the following when using online banking:(1)Observe the correct procedure for entering abanking website. Do not use links resultingfrom searches or links on other websites.(2)Online banking certifications are currently themost effective security safeguard measure. (3)Do not easily trust e-mails, phone calls, andshort messages, etc. that asks for your accountnumber and passwords.Phishers often impost a well-known enterprise while sending their e-mails, by changing the sender’s e-mail address to that of the well known enterprise, in order to gain people’s trust. The ‘From’ column of an e-mail is set by the mail software and can be easily changed by the web administrator. Then, the Phisher creates a fake information input website, and send out e-mails containing a link to this fake website to lure e-mail recipients into visiting his fake website.Most Phishers create imitations of well known enterprises websites to lure users into using their fake websites. Even so, a user can easily notice that the URL of the website they’re entering has no relation to the intended enterprise. Hence, Phishers may use different methods to impersonate enterprises and other people. A commonly used method is hiding the URL. This can easily be done with the help of JavaScript.Another way is to exploit the loopholes in an internet browser, for instance, displaying a fake URL in the browser’s address bar. The security loophole causing the address bar of a browser to display a fake URL is a commonly used trick and has often been used in the past. For example, an e-mail in HTML format may hold the URL of a website of a well-known enterprise, but in reality, the link connects to a fake website.The key to successfully use a URL similar to that of the intended website is to trick the visual senses. For example, the sender’s address could be disguised as that of Nikkei BP, and the link set to http://www.nikeibp.co.jp/ which has one k less than the correct URL which is http://www.nikkeibp.co.jp/. The two URLs look very similar, and the difference barely noticeable. Hence people are easily tricked into clicking the link.Besides the above, there are many more scams that exploit the trickery of visual senses. Therefore, you should not easily trust the given sender’s name and a website’s appearance. Never click on unfamiliar and suspicious URLs on a webpage. Also, never enter personal information into a website without careful scrutiny.3. ConclusionsBusiness strategy is the most effective form of defense and also the easiest to carry out. Therefore, they should be the first line of defense, and not last. First, determine if instant messaging is essential in the business; then weigh its pros and cons. Rules and norms must be set on user ends if it is decided that the business cannot do without instant messaging functionality. The end server should be able to support functions like centralized logging and encryption. If not, then strict rules must be drawn, and carried out by the users. Especially, business discussions must not be done over an instant messenger.The paper categorized hacking tricks into three categories: (1) Trojan programs that share files via instant messenger. (2) Phishing (3) Fake Websites. Hacking tricks when successfully carried out could cause considerable loss and damage to users. The first category of hacking tricks can be divided into three types: (1) Hijacking and Impersonation; (2) Denial of Service; (3) Information Disclosure.Acknowledgement:This work was supported by the National Science Council, Taiwan, under contract No. NSC 95-2221-E-029-024.References[1] B. Schneier, “The trojan horse race,”Communications of ACM, Vol. 42, 1999, pp.128.[2] C. L. Schuba, “Analysis of a denial of serviceattack on TCP,” IEEE Security and PrivacyConference, 1997, pp. 208-223.[3] E. Schultz, “Phishing is becoming moresophisticated,” Computer and Security, Vol.24(3), 2005, pp. 184-185.[4]G. Miklau, D. Suciu, “A formal analysis ofinformation disclosure in data exchange,”International Conference on Management ofData, 2004, pp. 575-586.[5]J. Hoyle, “'Phishing' for trouble,” Journal ofthe American Detal Association, Vol. 134(9),2003, pp. 1182-1182.[6]J. Scambray, S. McClure, G. Kurtz, Hackingexposed: network security secrets and solutions,McGraw-Hill, 2001.[7]T. Tsuji and A. Shimizu, “An impersonationattack on one-time password authenticationprotocol OSPA,” to appear in IEICE Trans.Commun, Vol. E86-B, No.7, 2003.[8]Anti-Phishing Working Group,.[9]/region/tw/enterprise/article/icq_threat.html.有关网络环境安全的黑客技术摘要：现在人们往往通过互联网处理事务。

毕业设计(论文)外文翻译

华南理工大学广州学院本科生毕业设计（论文）翻译外文原文名Agency Cost under the Restriction of Free Cash Flow中文译名自由现金流量的限制下的代理成本学院管理学院专业班级会计学3班学生姓名陈洁玉学生学号200930191100指导教师余勍讲师填写日期2015年5月11日外文原文版出处：译文成绩：指导教师（导师组长）签名：译文：自由现金流量的限制下的代理成本摘要代理成本理论是资本结构理论的一个重要分支。

自由现金流代理成本有显着的影响。

在这两个领域相结合的研究，将有助于建立和扩大理论体系。

代理成本理论基础上，本研究首先分类自由现金流以及统计方法的特点。

此外，投资自由现金流代理成本的存在证明了模型。

自由现金流代理成本理论引入限制，分析表明，它会改变代理成本，进而将影响代理成本和资本结构之间的关系，最后，都会影响到最优资本结构点，以保持平衡。

具体地说，自由现金流增加，相应地，债务比例会降低。

关键词：资本结构，现金流，代理成本，非金钱利益1、介绍代理成本理论，金融契约理论，信号模型和新的啄食顺序理论，新的资本结构理论的主要分支。

财务con-道的理论侧重于限制股东的合同行为，解决股东和债权人之间的冲突。

信令模式和新的啄食顺序理论中心解决投资者和管理者之间的冲突。

这两种类型的冲突是在商业组织中的主要冲突。

代理成本理论认为，如何达到平衡这两种类型的冲突，资本结构是如何形成的，这是比前两次在一定程度上更多的理论更全面。

……Agency Cost under the Restriction of Free Cash FlowAbstractAgency cost theory is an important branch of capital structural theory. Free cash flow has significant impact on agency cost. The combination of research on these two fields would help to build and extend the theoretical system. Based on agency cost theory, the present study firstly categorized the characteristics of free cash flow as well as the statistical methodologies. Furthermore, the existence of investing free cash flow in agency cost was proved by a model. Then free cash flow was introduced into agency cost theory as restriction, the analysis shows that it will change agency cost, in turn, will have an impact on the relationship between agency cost and capital structure, finally, will influence the optimal capital structure point to maintain the equilibrium. Concretely, with the increasing free cash flow, correspondingly, debt proportion will decrease.Keywords:Capital Structure,Free Cash Flow,Agency Cost,Non-Pecuniary Benefit1. IntroductionAgency cost theory, financial contract theory, signaling model and new pecking order theory are the main branches of new capital structure theory. Financial con-tract theory focuses on restricting stockholders’ behavior by contract and solving the conflict between stockholders and creditors. Signaling model and new pecking order theory center on solving the conflict between investors and managers. These two types of conflict are the main conflict in business organizations. Agency cost theory considers how equilibrium is reached in both types of conflict and how capital structure is formed, which is more theory is more comprehensive than the previous two to some degree.……。

机械设计制造及其自动化毕业论文中英文资料外文翻译

机械设计创造及其自动化毕业论文外文文献翻译INTEGRATION OF MACHINERY译文题目专业机械设计创造及其自动化外文资料翻译INTEGRATION OF MACHINERY（From ELECTRICAL AND MACHINERY INDUSTRY）ABSTRACTMachinery was the modern science and technology development inevitable result, this article has summarized the integration of machinery technology basic outline and the development background .Summarized the domestic and foreign integration of machinery technology present situation, has analyzed the integration of machinery technology trend of development.Key word： integration of machinery ，technology， present situation ，product t，echnique of manufacture ，trend of development0. Introduction modern science and technology unceasing development, impelled different discipline intersecting enormously with the seepage, has caused the project domain technological revolution and the transformation .In mechanical engineering domain, because the microelectronic technology and the computer technology rapid development and forms to the mechanical industry seepage the integration of machinery, caused the mechanical industry the technical structure, the product organization, the function and the constitution, the production method and the management systemof by machinery for the characteristic integration ofdevelopment phase.1. Integration of machinery outline integration of machinery is refers in the organization new owner function, the power function, in the information processing function and the control function introduces the electronic technology, unifies the system the mechanism and the computerization design and the software which constitutes always to call. The integration of machinery development also has become one to have until now own system new discipline, not only develops along with the science and technology, but also entrusts with the new content .But its basic characteristic may summarize is: The integration of machinery is embarks from the system viewpoint, synthesis community technologies and so on utilization mechanical technology, microelectronic technology, automatic control technology, computer technology, information technology, sensing observation and control technology, electric power electronic technology, connection technology, information conversion technology as well as software programming technology, according to the system function goal and the optimized organization goal, reasonable disposition and the layout various functions unit, in multi-purpose, high grade, redundant reliable, in the low energy consumption significance realize the specific function value, and causes the overall system optimization the systems engineering technology .From this produces functional system, then becomes an integration of machinery systematic or the integration of machinery product. Therefore, of coveringtechnology is based on the above community technology organic fusion one kind of comprehensive technology, but is not mechanical technical, the microelectronic technology as well as other new technical simple combination, pieces together .This is the integration of machinery and the machinery adds the machinery electrification which the electricity forms in the concept basic difference .The mechanical engineering technology has the merely technical to develop the machinery electrification, still was the traditional machinery, its main function still was replaces with the enlargement physical strength .But after develops the integration of machinery, micro electron installment besides may substitute for certain mechanical parts the original function, but also can entrust with many new functions,like the automatic detection, the automatic reduction information, demonstrate the record, the automatic control and the control automatic diagnosis and the protection automatically and so on .Not only namely the integration of machinery product is human's hand and body extending, human's sense organ and the brains look, has the intellectualized characteristic is the integration of machinery and the machinery electrification distinguishes in the function essence.2. Integration of machinery development condition integration of machinery development may divide into 3 stages roughly.20th century 60's before for the first stage, this stage is called the initial stage .In this time, the people determination not on own initiative uses the electronic technology the preliminary achievement to consummate the mechanical product the performance .Specially in Second World War period, the war has stimulated the mechanical product and the electronic technology union, these mechanical and electrical union military technology, postwar transfers civilly, to postwar economical restoration positive function .Developed and the development at that time generally speaking also is at the spontaneouscondition .Because at that time the electronic technology development not yet achieved certain level, mechanical technical and electronic technology union also not impossible widespread and thorough development, already developed the product was also unable to promote massively. The 20th century 70~80 ages for the second stage, may be called the vigorous development stage .This time, the computer technology, the control technology, the communication development, has laid the technology base for the integration of machinery development . Large-scale, ultra large scale integrated circuit and microcomputer swift and violent development, has provided the full material base for the integration of machinery development .This time characteristic is :①A mechatronics word first generally is accepted in Japan, probably obtains the quite widespread acknowledgment to 1980s last stages in the worldwide scale ;②The integration of machinery technology and the product obtained the enormous development ;③The various countries start to the integration of machinery technology and the product give the very big attention and the support. 1990s later periods, started the integration of machinery technology the new stagewhich makes great strides forward to the intellectualized direction, the integration of machinery enters the thorough development time .At the same time, optics, the communication and so on entered the integration of machinery, processes the technology also zhan to appear tiny in the integration of machinery the foot, appeared the light integration of machinery and the micro integration of machinery and so on the new branch; On the other hand to the integration of machinery system modeling design, the analysis and the integrated method, the integration of machinery discipline system and the trend of development has all conducted the thorough research .At the same time, because the hugeprogress which domains and so on artificial intelligence technology, neural network technology and optical fiber technology obtain, opened the development vast world for the integration of machinery technology .These research, will urge the integration of machinery further to establish the integrity the foundation and forms the integrity gradually the scientific system. Our country is only then starts from the beginning of 1980s in this aspect to study with the application .The State Councilsummary had considered fully on international the influence which and possibly brought from this about the integration of machinery technology developmenttrend .Many universities, colleges and institutes, the development facility and some large and middle scale enterprises have done the massive work to this technical development and the application, does not yield certain result, but and so on the advanced countries compared with Japan still has the suitable disparity.3. Integration of machinery trend of development integrations of machinery are the collection machinery, the electron, optics, the control, the computer, the information and so on the multi-disciplinary overlapping syntheses, its development and the progress rely on and promote the correlation technology development and the progress .Therefore, the integration of machinery main development direction is as follows:3.1 Intellectualized intellectualizations are 21st century integration of machinery technological development important development directions .Theartificial intelligence obtains day by day in the integration of machinery constructor's research takes, the robot and the numerical control engine bedis to the machine behavior description, is in the control theory foundation, the absorption artificial intelligence, the operations research, the computer science, the fuzzy mathematics, the psychology, the physiology and the chaos dynamics and so on the new thought, the new method, simulate the human intelligence, enable it to have abilities and so on judgment inference, logical thinking, independent decision-making, obtains the higher control goal in order to .Indeed, enable the integration of machinery product to have with the human identical intelligence, is not impossible, also is nonessential .But, the high performance, the high speed microprocessor enable the integration of machinery product to have preliminary intelligent or human's partial intelligences, then is completely possible and essential.In the modern manufacture process, the information has become the control manufacture industry the determining factor, moreover is the most active actuation factor .Enhances the manufacture system information-handling capacity to become the modern manufacture science development a key point .As a result of the manufacture system information organization and structure multi-level, makes the information the gain, the integration and the fusion presents draws up the character, information measure multi-dimensional, as well as information organization's multi-level .In the manufacture information structural model, manufacture information uniform restraint, dissemination processing and magnanimous data aspects and so on manufacture knowledge library management, all also wait for further break through.Each kind of artificial intelligence tool and the computation intelligence method promoted the manufacture intelligence development in the manufacture widespread application .A kind based on the biological evolution algorithm computation intelligent agent, in includes thescheduling problem in the combination optimization solution area of technology, receives the more and more universal attention, hopefully completes the combination optimization question when the manufacture the solution speed and the solution precision aspect breaks through the question scale in pairs the restriction .The manufacture intelligence also displays in: The intelligent dispatch, the intelligent design, the intelligent processing, the robot study, the intelligent control, the intelligent craft plan, the intelligent diagnosis and so on are various These question key breakthrough, may form the product innovation the basic research system. Between 2 modern mechanical engineering front science different science overlapping fusion will have the new science accumulation, the economical development and society's progress has had the new request and the expectation to the science and technology, thus will form the front science .The front science also has solved and between the solution scientific question border area .The front science has the obvious time domain, the domain and the dynamic characteristic .The project front science distinguished in the general basic science important characteristic is it has covered the key science and technology question which the project actual appeared.Manufacture system is a complex large-scale system, for satisfies the manufacture system agility, the fast response and fast reorganization ability, must profit from the information science, the life sciences and the social sciences and so on the multi-disciplinary research results, the exploration manufacture system new architecture, the manufacture pattern and the manufacture system effective operational mechanism .Makes the system optimization the organizational structure and the good movement condition is makes the system modeling , the simulation and the optimized essential target .Not only the manufacture system new architecture to makes the enterprise the agility and may reorganize ability to the demand response ability to have the vital significance, moreover to made the enterprise first floor production equipment the flexibility and may dynamic reorganization ability set a higher request .The biological manufacture view more and more many is introduced the manufacture system, satisfies the manufacture system new request.The study organizes and circulates method and technique of complicated system from the biological phenomenon, is a valid exit which will solve many hard nut to cracks that manufacturing industry face from now on currently .Imitating to living what manufacturing point is mimicry living creature organ of from the organization, from match more, from growth with from evolution etc. function structure and circulate mode of a kind of manufacturing system and manufacturing process.The manufacturing drives in the mechanism under, continuously by one's own perfect raise on organizing structure and circulating mode and thus to adapt the process of[with] ability for the environment .For from descend but the last product proceed together a design and make a craft rules the auto of the distance born, produce system of dynamic state reorganization and product and manufacturing the system tend automatically excellent provided theories foundation and carry out acondition .Imitate to living a manufacturing to belong to manufacturing science and life science of"the far good luck is miscellaneous to hand over", it will produce to the manufacturing industry for 21 centuries huge of influence .机电一体化摘要机电一体化是现代科学技术发展的必然结果,本文简述了机电一体化技术的基本概要和发展背景。

论文英文翻译最终版

序号（学号）：040940131长春光华学院毕业设计（论文）译文Electronic technique电子技术姓名盛遵义教学院电气信息学院专业电子信息工程班级电信09401指导教师张淑艳（讲师）2013 年04 月10 日┊┊┊┊┊┊┊┊┊┊┊┊┊装┊┊┊┊┊订┊┊┊┊┊线┊┊┊┊┊┊┊┊┊┊┊┊┊Electronic techniqueFrom the world of radio in the world to a single chip， modern computer technology， industrial revolution， the world economy from the capital into the economy to knowledge economy。

Field in the electronic world， from the 20th century into the era of radio to computer technology in the 21st century as the center of the intelligent modern era of electronic systems。

The basic core of modern electronic systems are embedded computer systems (referred to as embedded systems)， while the microcontroller is the most typical and most extensive and most popular embedded systems。

radio has created generations of excellence in the world Fifties and sixties in the 20th century，the most representative of the advanced electronic technology is wireless technology， including radio broadcasting， radio，wireless communications (telegraph)，Amateur Radio， radio positioning，navigation and other telemetry， remote control， remote technology。

仓储物流外文文献翻译中英文原文及译文2023-2023

仓储物流外文文献翻译中英文原文及译文2023-2023原文1：The Current Trends in Warehouse Management and LogisticsWarehouse management is an essential component of any supply chain and plays a crucial role in the overall efficiency and effectiveness of logistics operations. With the rapid advancement of technology and changing customer demands, the field of warehouse management and logistics has seen several trends emerge in recent years.One significant trend is the increasing adoption of automation and robotics in warehouse operations. Automated systems such as conveyor belts, robotic pickers, and driverless vehicles have revolutionized the way warehouses function. These technologies not only improve accuracy and speed but also reduce labor costs and increase safety.Another trend is the implementation of real-time tracking and visibility systems. Through the use of RFID (radio-frequency identification) tags and GPS (global positioning system) technology, warehouse managers can monitor the movement of goods throughout the entire supply chain. This level of visibility enables better inventory management, reduces stockouts, and improves customer satisfaction.Additionally, there is a growing focus on sustainability in warehouse management and logistics. Many companies are implementing environmentally friendly practices such as energy-efficient lighting, recycling programs, and alternativetransportation methods. These initiatives not only contribute to reducing carbon emissions but also result in cost savings and improved brand image.Furthermore, artificial intelligence (AI) and machine learning have become integral parts of warehouse management. AI-powered systems can analyze large volumes of data to optimize inventory levels, forecast demand accurately, and improve operational efficiency. Machine learning algorithms can also identify patterns and anomalies, enabling proactive maintenance and minimizing downtime.In conclusion, warehouse management and logistics are continuously evolving fields, driven by technological advancements and changing market demands. The trends discussed in this article highlight the importance of adopting innovative solutions to enhance efficiency, visibility, sustainability, and overall performance in warehouse operations.译文1：仓储物流管理的当前趋势仓储物流管理是任何供应链的重要组成部分，并在物流运营的整体效率和效力中发挥着至关重要的作用。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

编号：桂林电子科技大学信息科技学院毕业设计(论文)外文翻译（译文）系别：电子工程系专业：电子信息工程学生姓名：韦骏学号：0852100329指导教师单位：桂林电子科技大学信息科技学院姓名：梁勇职称：讲师2012 年6 月5 日设计与实现基于Modbus 协议的嵌入式Linux 系统摘要：随着嵌入式计算机技术的飞速发展，新一代工业自动化数据采集和监测系统，采用核心的高性能嵌入式微处理器的，该系统很好地适应应用程序。

它符合消费等的严格要求的功能，如可靠性，成本，尺寸和功耗等。

在工业自动化应用系统，Modbus 通信协议的工业标准，广泛应用于大规模的工业设备系统，包括DCS，可编程控制器，RTU 及智能仪表等。

为了达到嵌入式数据监测的工业自动化应用软件的需求，本文设计了嵌入式数据采集监测平台下基于Modbus 协议的Linux 环境采集系统。

串行端口的Modbus 协议是实现主/从式，其中包括两种通信模式：ASCII 和RTU。

因此，各种药膏协议的设备能够满足串行的Modbus通信。

在Modbus 协议的嵌入式平台实现稳定和可靠。

它在嵌入式数据监测自动化应用系统的新收购的前景良好。

关键词：嵌入式系统，嵌入式Linux，Modbus 协议，数据采集，监测和控制。

1、绪论Modbus 是一种通讯协议，是一种由莫迪康公司推广。

它广泛应用于工业自动化，已成为实际的工业标准。

该控制装置或不同厂家的测量仪器可以链接到一个行业监控网络使用Modbus 协议。

Modbus 通信协议可以作为大量的工业设备的通讯标准，包括PLC，DCS 系统，RTU 的，聪明的智能仪表。

随着嵌入式计算机技术的飞速发展，嵌入式数据采集监测系统，使用了高性能的嵌入式微处理器为核心，是一个重要的发展方向。

在环境鉴于嵌入式Linux 的嵌入式工业自动化应用的数据，一个Modbus 主协议下的采集监测系统的设计和实现了这个文件。

因此，通信设备，各种药膏协议能够满足串行的Modbus。

2、Modbus 协议简介Modbus 协议包括ASCII 码，RTU 和TCP 传输模式，支持传统的RS - 232 和RS - 422，RS - 485 和以太网设备。

至于串口的Modbus 设备，控制器，在标准的Modbus 网络协议可以建立在两个传输模式：ASCII 模式或RTU 模式种。

至于以太网的Modbus 设备，传输模式是Modbus / TCP 协议。

相同的传输模式和参数必须选择在网络上所有设备的Modbus。

Modbus 协议是独立于硬件。

取而代之的是物理层，它只定义了利用结构的资料，该控制器能够区分的。

然而，网络式的沟通是没有定义。

Modbus 协议规定了信息和数据结构，指挥和响应方式。

该协议以主/从方法用于数据通信。

主机发出的请求信息，而从机产生响应信息和主返回到正确的信息作出反应的要求后接收。

主机还可以将信息发送到修改了数据的从机。

Modbus 协议需要验证数据。

串行协议具有校验，此外，ASCII 模式采用LRC校验，RTU 模式和使用16 CRC 校验。

但是，TCP 模式没有额外规定检查，因为TCP 协议是一个可靠的协议，面临的连接。

此外，使用的Modbus 主从方式，接收和发送在固定时间内的资料。

在实务上，如果某些从属设备分开，主可以诊断它，故障被修复后，网络可以自动连接。

因此，Modbus 协议是可靠的。

由于Modbus 协议的消息结构，每个控制器需要一台设备的地址，这是用来区分消息和法官会采取什么行动进行。

如果响应是必要的，控制器将产生答复和Modbus 协议传送到查询的一面。

该系统的设计它是嵌入式数据采集系统的总体结构图。

在这个系统中，嵌入式数据采集平台是核心和控制设备的数据通信与嵌入式数据采集平台的Modbus 协议的Modbus 从站通过各种。

因此，数据采集，数据分析后，通过TCP /IP 是实现预处理的数据传输给操作员和工程师监测中心站。

工业级微处理器是Atmel 公司的AT91RM9200 的作为嵌入式数据采集平台的核心。

在嵌入式数据采集平台集成多种周边连接此外，包括串口，CAN 总线接口，使AD / DA 接口，RS485 接口，SD / MMC 卡读写器，JTAG 和调试调试接口等，18 英寸TFT 真彩色液晶显示屏，它可以在数据可能被用于演示，也有触摸屏的功能，也集成在该平台。

嵌入式Linux 操作系统中使用的嵌入式数据采集平台，以及Modbus 协议主功能得以实现。

因此，嵌入式平台，可以通过串口读了Modbus协议奴隶的数据，并显示在LCD（触摸屏）被处理后，分析和数据。

同时，可以传输数据，通过以太网接口的嵌入式平台，以供进一步的监测和管理监测中心经过分析和处理中。

4、设计与Modbus 协议的嵌入式Linux 环境下执行4.1、嵌入式Linux 系统及移植随着Linux 的发展方向之一，嵌入式Linux 有许多成功和成熟的产品。

稳定性，可靠性和高效率的嵌入式Linux 正在证明了的事实。

嵌入式Linux 开放的源代码，提供技术支持，具有良好的可扩展性广泛，支持多种硬件。

所有这些都是嵌入式Linux 的优势。

该系统采用嵌入式的硬件环境为Linux 操作系统和ARM9。

目前，臂Linux 支持公司的一系列的ARM 处理器，包括ARM610，ARM710，ARM720Tcores，ARM920Tcores，StrungARM110，SrtongARM1100，XScale 和等是Atmel 的AT91RM9200 的板的使用为目标，在这个文件。

从标准Linux 不同，它必须开始从闪存或ROM 中。

美国启动用作本文启动程序。

为了手动移植Linux 操作系统，它也需要各种资源Linux 驱动程序。

如果该设备是由他们自己设计的，它需要编写相应的驱动程序。

Linux 的移植的一般步骤如图2。

至于到了ARM 内核和文件系统的Linux，u - boot 的是先通过串口下载到开发板，然后使用串口或网络的方法。

由于内核和文件系统的反映是相当大的文件，通过串行端口传输速度缓慢;以太网模式用于下载内核和文件系统。

当然，网络的U - Boot 的参数需要在下载前处理。

根据建立的u - boot 命令模式的u - boot 的网络参数：TFTP 服务是运行在服务器上，然后编译内核和文件系统映像的图像被添加到服务器的目录。

服务器和网络开发板与电缆连接，然后，内核和文件下载到系统的内存通过运行启动命令行下面的命令下的u - boot：已编译的Linux 可以操作臂后进行bootm 21000000。

内核和文件系统中内存可以通过闪存写入启动处长秩序的u。

该系统能自动运行后，设置启动参数。

然后程序操作的开发板。

4.2、串行配置的Modbus 协议在Linux 环境下标准的Modbus 串行协议使用的RS232/RS485 传输。

串行设备设备节点为/dev/ttyS0 来（COM1 端口）dev/ttyS1 COM2 端口）Linux 环境。

和/（在由于Modbus串行协议包括两种传输模式：ASCII 和RTU 模式。

起始标记和结束标记的两种模式是不同的。

此外，每个信息包数据的位置也不同。

因此，必须单独处理。

以RTU 模式为例，介绍在Linux 环境下的Modbus 串行协议配置。

头文件由串行操作需要的是：当Modbus 协议的特点是采用RTU 传输模式下，串行波特率，数据位，停止位置，检查位置和控制应根据设定的框架特征的信息。

建立串口波特率：在设计中，以使其得到方便。

功能参数，是一个结构的定义如下凡slave_address 就是从站地址。

一个Modbus 网络允许最多255 个从站。

该函数是服务模式的选择特点，并有六种服务模式在本系统提供的，分别为1-6。

该start_address 是16 位字符，这是目前从站供电设备的起始地址。

该pointnum_or_setdata 包括2 种文字，服务1-4 是点头人数增加经营，服务 5 和6 是16 位字符正在建立。

该方案首先确定了格式字符值，建立了传输模式，用户需要，这将决定哪些串行配置功能和服务功能什么样的选择。

然后设置串口参数在Linux 环境。

相应的服务结构功能是通过判断用户的请求服务类型的选择。

例如，如果格式为0，采用RTU 模式。

该函数是1，这意味着用户请求读取线圈。

该方案通过使用construct_rtu_frm 构造函数是rtu_read_status 函数调用的Modbus 的请求帧。

该方案保留了串行传输缓冲区mod_tx_buf，这是事先定义它，然后把通过调用命令的Modbus 串行传输请求帧。

如果程序设定的时间内得到答复框架，该方案将处理答复帧通过调用相应的模式解析函数。

举例来说，当是ASCII 传输模式，在ascii_data_anlys 函数被调用，如果传输模式是RTU 模式，然后rtu_data_anlys 函数被调用。

解析函数的分析数据，接收缓冲区接收串行。

如果答复框架分析是正确的，该函数将数据加载到目标缓冲区。

如果是错误的，该函数将终止这项服务，并处理错误，打印错误信息了。

4.3、Modbus 协议的串行软件设计这里主要介绍了方案的设计与实现串行Modbus 协议，其中包括两种传输模式RTU 和ASCII。

在Modbus 主机服务包括人机交互模块，功能选择模块，功能处理模块和返回处理模块。

每个模块的功能是实现了在嵌入式Linux 环境。

人机交互模块是为用户和平台的通信模块。

它主要实现了网页打印功能，用户信息的输入和指导等。

该函数的选择模块是平台选择的Modbus 主函数的选择参数根据用户输入的信息。

这些参数包括传播方式的，服务类型，从站地址等。

该函数处理模块是这个平台的核心。

它包括串口初始化的功能，结构的Modbus 帧，模态分析的Modbus 帧，各类业务处理和业务处理等6 种主要的设计，其中包括：为串行的Modbus 设备在这个平台阅读线圈状态，读输入状态，读保持寄存器，读输入寄存器，写，写单线圈单登记。

这 6 种的模式涵盖了Modbus的基本功能需求。

而这是非常方便的扩大，如果必要的其他职能。

返回处理模块流程操作平台的结果。

如果用户请求的服务流程成功，服务结果将通过标准打印输出设备，，否则错误信息打印。

4.4、服务的结构和功能分析框架以读持有注册服务为例，介绍了施工过程中要求的Modbus 帧。

该函数读取保存寄存器数是03 和建设要求的Modbus 帧是实现通过rtu_read_hldreg 和ascii_read_hldreg 功能。

前者实现了RTU 的框架结构，而后者的ASCII 框架结构。

该rtu_read_hldreg 结构如下所示：输入参数board_adr 就是从站地址，用户需要访问的。