可卸式代型制作流程

Master-Pin-System
The pin system for perfect sawcut models
Master-Pin-System
Master – Pin
&
Sleeve
Master-Pin-System
Perfect sawcut models
Master-Pin-System
• helps to save time • optimized handling • perfect aesthetics
Individual components
One plate size for all sizes Three model formers
small
medium
large
Individual components
The base & model formers are extremely smooth and self – separating = additional separating is not reqired !
Master-Split base former
Intagreted permanent magnet = perfect fixation ! Raised octagon platform = more stability during lateral movement ! Smooth & self-separating plastic surface = easy removal of the model from the plate !
Master-System
The perfect models
Master-System
The bredent Master-System consists of three separate systems ... ... which are compatible among themselves
Master-Split base former
Problems ?
Slopping
Economical production of models • universal model system
small
medium
large
Master-Copy
The duplicating model can be placed into the articulator
Model former
Base former
Metal magnetic plates
Master-Split-System
Individual components fitting together
Master-Split-System
1 2
3
4
Master-Split-System
Due to special shape of the sleeve, an indentation is obtainet at the model base which simplifiles the removal of the plate
With Master-Sep a soft gliding layer is obtained by wetting the pins ...
Master-Sep
... the arch is easily removed from the base
Master-Pin-System
1
The Master – sleeves rise from the Master – Pins by approx. 0.5mm so that uniform, constant height is achieved Fluid-Rock
Master-Split-System
1 2
3
4
Master-Split-System
The plate is inserted properly, when the edge is 0.1 mm high step ! = the markings at the edge allow precise and the position of the model can be easily chacked !
Master-Pin-System
Diatit step drill for constant, precise drilling over long period
Master-Pin-System
Master-Pin-System
1 2
3
4
பைடு நூலகம்
Master-Sep
Special insulating liquid
Master-Split-System
Plaster dust can be easily recognized on the green plate ...
Master-Split-System
... and need to be cleaned under running water !
Master-Split-System
Master- Pin
Small drilling depth of only 4,5 mm !
No perforation of the arch during drilling !
4,5 mm
= enhanced stability
Master-Pin-System Working procedure
Diameter of drill-hole only 1,5 mm !
Only one pin size for all options !
1,5 mm
The perfect solution in case of drill-holes with small distance to each other !
One plate size for all sizes Three model formers Metal magnetic plates
small
medium
large
℮ 80 Gramm
℮ 100 Gramm
℮ Ø 180 Gramm
Master-Split-System
Few individual components :
2
3
Fluid-Rock
Expansion values < 0,06%
1 2
Master-Pin-System
Perfect sawcut master model
The mirror image of your laboratory
Economical split – cast model fabrication in only one – step