HL型斜流泵立式混流泵
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
(I) —Secondary design
设计特点
● 可设计型谱图范围中任意流量和扬程的水泵。 ●根据泵输送的介质条件，可选择不同的零件材质。
●根据用户要求，可选择不同的密封和轴承类型。 ●高效节能，稳定可靠。 ●结构合理，便于安装，检修。
Design characteristics
● All pumps can be purposely designed according to any capacity and head range in the below
Overview
The main application of the vertical mixed flow pumps of Type HL 、 HLK and HLKS 、 HLKT is as circulation pumps in power plants. In general, these pumps can be also used for transporting clean water, rainwater, sewage and seawater under 55 ℃ for mines, city infrastructures and agricul ture projects.
4. The axial force is normally borne by the thrust bearing of motor, and it can be borne by the thrust bearing of the pump with special design.
5. Rubber bearing, Thordon bearing and Tianlong bearing can be adopted for guide Bearing. 6. Soft packing or liquid packing can be adopted for shaft seal.
性能范围
口径：350-4000mm 流量：0.2-40m³/s 扬程：5-90m
型号意义
1600HL(HLK、HLKS、HLKT)-20(I)型 1600－泵吐出口直径（mm） HL－不可抽立式斜流泵 HLK－可抽立式斜流泵 HLKS－吐出口在基础层之上的可抽立式斜流泵 HLKT－叶片可调的可抽立式斜流泵 20－泵设计点扬程(m) （I）－改型设计
600HL(B)-14.5 600HL(KS)-40
700HL(B)-8
700HL(BK)-10
700HL(B)-14 700HL(BK)-14.8
700HL(B)-15
流量 Capacity
Q
m³/h
m³/s
540
0.15
640
0.18
750
0.20
1450
0.40
2080
0.58
2300
0.64
1840
0.51Βιβλιοθήκη 22000.612650
0.74
2200
0.61
2500
0.69
3000
0.83
2200
0.57
1908
0.53
2950
0.82
3996
1.11
4000
1.11
1 2 3 4 5 6 7 8 9 10 11 12 13 14
零件名称 Part Name 吸入喇叭口 Suction Bell
叶轮室 Impeller Chamber
叶轮 Impeller 导叶体 Diffuser Casing 外接管 External Column 导轴承 Guide Bearing
立式斜流泵 Vertical mixed flow pump
使用说明书 INSTRUCTION
江苏苏华泵业制造有限公司 JIANGSU SUHUA PUMP INDUSTRY CO,LTD
概述
HL、HLK、HLKS、HLKT 型立式斜流泵主要适合于电厂作循环水泵用，也可用于工矿、城市和农田建设给 排水。输送介质为 55℃以下的清水、雨水、污水及海水。
Range of performance
Disch.Bor:350～4000mm Capacity:0.2～40mm Total Head:5～90m
Signification of type
1600HLB(HLBK、HLKS、HLKT) —20(I) 1600—Diameter of outlet (mm) HL—Non pull out vertical mixed flow pump HLK—Pull out vertical mixed flow pump HLKS—Pull out vertical mixed flow pump with outlet above foundation HLKT—Pull out vertical mixed flow pump with vane adjustable 20 —The total head of designed point(m)
Note：Any other aterial can be used as required.
材料型号（Material Type） II
低镍铬铸铁 Nihard
ZG1Cr13Nil CA-15
ZG0Cr18Ni12Mo2 CF-8M
低镍铬铸铁 Nihard
低镍铬铸铁 Nihard
赛龙、橡胶 Thordon、Rubber
7. Besides adopting the materials and dope of enduring seawater corroding, the pump transporting
seawater also adopts the equipment of abandoning anode and exterior power cathode protecting to prevent the parts of pump from electrochemisty corrosion.
3. The impeller is single stage: multi-stage impeller can be designed if necessary. There are three types of vane:non-adjustable, half-adjustable and adjustable vane.
I HT200 No.30 ZG1Cr13Nil CA-15 ZG00Cr18Ni12Mo2 CF-3 HT200、Q235-A No.30、A36 Q235-A
A36 赛龙、橡胶 Thordon、Rubber
Q235-A A36 2Cr13
ASTM420 Q235-A
A36 45 1045 Q235-A A36 Q235-A A36 HT200 No.30 HT200、Q235-A No.30、A36
● High efficiency and reliable.
● The structure is reasonable, and it is very convenient for installation and maintenance.
结构说明
1. 泵的吸水池一般为湿坑式（即将泵直接插入敞开的水池中）：若用户需要，也了设计成干坑式结构。 2. 泵分为不可抽出式、转子（包括导叶体）可抽出式、泵整体可抽出式。 3. 叶轮一般为单级，根据需要也可设计为多级：叶轮叶片分为不可调、半可调、全可调三种形式。 4. 泵的轴向推力一般由电动机推力轴承承受，也可设计成由泵自身推力轴承承受。 5. 泵的导轴承可采用橡胶轴承、赛龙轴承或天龙轴承。 6. 泵的轴封采用盘根软填料或液体填料。 7. 输送海水的泵，除采用耐海水腐蚀的材料和涂料处，还采用牺牲阳极法和外部电源法阴极保护装置，
D. Double base: upper base is axial supporting
机构图一（转子可抽出式） Structure General Assembly (Rotator Pull-out)
机构图二（转子不可抽出式） Structure General Assembly (Rotator Non-Pull-out)
2. Pump can be classified into three types:non-pull out, the rotator including diffuser casing can be pulled out and the whole pump can be pulled out.
护管 Guard Column
轴套 Shaft Sleeve
出水弯管 Discharge Elbow
轴 Shaft 支撑板 Mounting Plate 电机座 Motor Support 中间轴承座 Middle Bearing Bracket 导流壳 Guide Shell
注：如有需要，也可以采用其他材料。
以防止泵零件的电化学腐蚀。 8. 泵通过刚性或弹性联轴器由电机直接驱动。
Pump Structure Specification
1. The suction pool is wet-pit type that pump is immersed in opened pool directly, The dry-pit type suction pool can be designed if necessary.
A36 Q235-A
A36 00Cr17Ni12Mo2
ASTM316L 00Cr17Ni12Mo2
ASTM316L
性能参数表 Performance Data
型号 Type
300HL(B)-40
450HL(B)-35
500HL(B)-12
500HL(B)-17 500HL(B)-28 600HL(B)-7 600HL(B)-8 600HL(B)-8.3
Performance Chart.
● Materials for pump parts and components can be selected according to the characteristic of the
transported medium.
● Seal and beaiing types can be selected based on customers’ requirements.
0Cr18Ni9 ASTM304 0Cr18Ni9 ASTM304 低镍铬铸铁
Nihard 0Cr17Ni12Mo2
ASTM316L Q235-A A36 Q235-A A36
低镍铬铸铁 Nihard
低镍铬铸铁 Nihard
III ZG00Cr18Ni12Mo2
CF-3M ZG00Cr18Ni12Mo2
8. The pump is driven by the motor through the rigidity or spring coupling.
安装形式
A.单基础 B.单基础 C.双基础 D.双基础
吐出口在基础层之下 吐出口在基础层之上 上基础径向支撑 上基础轴向支撑
Mounting Types A. single base : the outlet is under the base layer B. single base : the outlet is above the base layer C. Double base: upper base is radial supporting
CF-3M ZG00Cr18Ni12Mo2
CF-3M 00Cr17Ni12Mo2
ASTM316L 00Cr17Ni12Mo2
ASTM316L 赛龙
Thordon 00Cr17Ni12Mo2
ASTM316L 0Cr18Ni9 ASTM304 00Cr17Ni12Mo2 ASTM316L 00Cr17Ni12Mo2 ASTM316L Q235-A
机构图三（整体可抽出式） Structure General Assembly ( Inner casing Pull-out)
机构图四（叶片可调式） Structure General Assembly (Vane Adjustable)
主要零件材料表
Main Parts Table
零件序号 Part No.
设计特点
● 可设计型谱图范围中任意流量和扬程的水泵。 ●根据泵输送的介质条件，可选择不同的零件材质。
●根据用户要求，可选择不同的密封和轴承类型。 ●高效节能，稳定可靠。 ●结构合理，便于安装，检修。
Design characteristics
● All pumps can be purposely designed according to any capacity and head range in the below
Overview
The main application of the vertical mixed flow pumps of Type HL 、 HLK and HLKS 、 HLKT is as circulation pumps in power plants. In general, these pumps can be also used for transporting clean water, rainwater, sewage and seawater under 55 ℃ for mines, city infrastructures and agricul ture projects.
4. The axial force is normally borne by the thrust bearing of motor, and it can be borne by the thrust bearing of the pump with special design.
5. Rubber bearing, Thordon bearing and Tianlong bearing can be adopted for guide Bearing. 6. Soft packing or liquid packing can be adopted for shaft seal.
性能范围
口径：350-4000mm 流量：0.2-40m³/s 扬程：5-90m
型号意义
1600HL(HLK、HLKS、HLKT)-20(I)型 1600－泵吐出口直径（mm） HL－不可抽立式斜流泵 HLK－可抽立式斜流泵 HLKS－吐出口在基础层之上的可抽立式斜流泵 HLKT－叶片可调的可抽立式斜流泵 20－泵设计点扬程(m) （I）－改型设计
600HL(B)-14.5 600HL(KS)-40
700HL(B)-8
700HL(BK)-10
700HL(B)-14 700HL(BK)-14.8
700HL(B)-15
流量 Capacity
Q
m³/h
m³/s
540
0.15
640
0.18
750
0.20
1450
0.40
2080
0.58
2300
0.64
1840
0.51Βιβλιοθήκη 22000.612650
0.74
2200
0.61
2500
0.69
3000
0.83
2200
0.57
1908
0.53
2950
0.82
3996
1.11
4000
1.11
1 2 3 4 5 6 7 8 9 10 11 12 13 14
零件名称 Part Name 吸入喇叭口 Suction Bell
叶轮室 Impeller Chamber
叶轮 Impeller 导叶体 Diffuser Casing 外接管 External Column 导轴承 Guide Bearing
立式斜流泵 Vertical mixed flow pump
使用说明书 INSTRUCTION
江苏苏华泵业制造有限公司 JIANGSU SUHUA PUMP INDUSTRY CO,LTD
概述
HL、HLK、HLKS、HLKT 型立式斜流泵主要适合于电厂作循环水泵用，也可用于工矿、城市和农田建设给 排水。输送介质为 55℃以下的清水、雨水、污水及海水。
Range of performance
Disch.Bor:350～4000mm Capacity:0.2～40mm Total Head:5～90m
Signification of type
1600HLB(HLBK、HLKS、HLKT) —20(I) 1600—Diameter of outlet (mm) HL—Non pull out vertical mixed flow pump HLK—Pull out vertical mixed flow pump HLKS—Pull out vertical mixed flow pump with outlet above foundation HLKT—Pull out vertical mixed flow pump with vane adjustable 20 —The total head of designed point(m)
Note：Any other aterial can be used as required.
材料型号（Material Type） II
低镍铬铸铁 Nihard
ZG1Cr13Nil CA-15
ZG0Cr18Ni12Mo2 CF-8M
低镍铬铸铁 Nihard
低镍铬铸铁 Nihard
赛龙、橡胶 Thordon、Rubber
7. Besides adopting the materials and dope of enduring seawater corroding, the pump transporting
seawater also adopts the equipment of abandoning anode and exterior power cathode protecting to prevent the parts of pump from electrochemisty corrosion.
3. The impeller is single stage: multi-stage impeller can be designed if necessary. There are three types of vane:non-adjustable, half-adjustable and adjustable vane.
I HT200 No.30 ZG1Cr13Nil CA-15 ZG00Cr18Ni12Mo2 CF-3 HT200、Q235-A No.30、A36 Q235-A
A36 赛龙、橡胶 Thordon、Rubber
Q235-A A36 2Cr13
ASTM420 Q235-A
A36 45 1045 Q235-A A36 Q235-A A36 HT200 No.30 HT200、Q235-A No.30、A36
● High efficiency and reliable.
● The structure is reasonable, and it is very convenient for installation and maintenance.
结构说明
1. 泵的吸水池一般为湿坑式（即将泵直接插入敞开的水池中）：若用户需要，也了设计成干坑式结构。 2. 泵分为不可抽出式、转子（包括导叶体）可抽出式、泵整体可抽出式。 3. 叶轮一般为单级，根据需要也可设计为多级：叶轮叶片分为不可调、半可调、全可调三种形式。 4. 泵的轴向推力一般由电动机推力轴承承受，也可设计成由泵自身推力轴承承受。 5. 泵的导轴承可采用橡胶轴承、赛龙轴承或天龙轴承。 6. 泵的轴封采用盘根软填料或液体填料。 7. 输送海水的泵，除采用耐海水腐蚀的材料和涂料处，还采用牺牲阳极法和外部电源法阴极保护装置，
D. Double base: upper base is axial supporting
机构图一（转子可抽出式） Structure General Assembly (Rotator Pull-out)
机构图二（转子不可抽出式） Structure General Assembly (Rotator Non-Pull-out)
2. Pump can be classified into three types:non-pull out, the rotator including diffuser casing can be pulled out and the whole pump can be pulled out.
护管 Guard Column
轴套 Shaft Sleeve
出水弯管 Discharge Elbow
轴 Shaft 支撑板 Mounting Plate 电机座 Motor Support 中间轴承座 Middle Bearing Bracket 导流壳 Guide Shell
注：如有需要，也可以采用其他材料。
以防止泵零件的电化学腐蚀。 8. 泵通过刚性或弹性联轴器由电机直接驱动。
Pump Structure Specification
1. The suction pool is wet-pit type that pump is immersed in opened pool directly, The dry-pit type suction pool can be designed if necessary.
A36 Q235-A
A36 00Cr17Ni12Mo2
ASTM316L 00Cr17Ni12Mo2
ASTM316L
性能参数表 Performance Data
型号 Type
300HL(B)-40
450HL(B)-35
500HL(B)-12
500HL(B)-17 500HL(B)-28 600HL(B)-7 600HL(B)-8 600HL(B)-8.3
Performance Chart.
● Materials for pump parts and components can be selected according to the characteristic of the
transported medium.
● Seal and beaiing types can be selected based on customers’ requirements.
0Cr18Ni9 ASTM304 0Cr18Ni9 ASTM304 低镍铬铸铁
Nihard 0Cr17Ni12Mo2
ASTM316L Q235-A A36 Q235-A A36
低镍铬铸铁 Nihard
低镍铬铸铁 Nihard
III ZG00Cr18Ni12Mo2
CF-3M ZG00Cr18Ni12Mo2
8. The pump is driven by the motor through the rigidity or spring coupling.
安装形式
A.单基础 B.单基础 C.双基础 D.双基础
吐出口在基础层之下 吐出口在基础层之上 上基础径向支撑 上基础轴向支撑
Mounting Types A. single base : the outlet is under the base layer B. single base : the outlet is above the base layer C. Double base: upper base is radial supporting
CF-3M ZG00Cr18Ni12Mo2
CF-3M 00Cr17Ni12Mo2
ASTM316L 00Cr17Ni12Mo2
ASTM316L 赛龙
Thordon 00Cr17Ni12Mo2
ASTM316L 0Cr18Ni9 ASTM304 00Cr17Ni12Mo2 ASTM316L 00Cr17Ni12Mo2 ASTM316L Q235-A
机构图三（整体可抽出式） Structure General Assembly ( Inner casing Pull-out)
机构图四（叶片可调式） Structure General Assembly (Vane Adjustable)
主要零件材料表
Main Parts Table
零件序号 Part No.