02 2006-2-28 Product Identification Date Code

合集下载

Product Identification产品标识

Product Identification【Product Name【Synonyms【CAS】2409-55-4【FormulaC11H16O【Molecular Weight164.25【EINECS】219-314-6【RTECS】GO7000000【RTECS Class】【Beilstein/Gmelin】1817645【Beilstein Reference】4-06-00-03397【EC Class】Physical and Chemical Properties【Appearance【Solubility in water【Melting Point49 - 52【Boiling Point244【Vapor Pressure.03【Density】0.961 g/cm3 (20 C)【Heat Of Vaporization】63.02 kJ/mol【Heat Of Combustion】-6308 kJ/mol【Usage】Chemical intermediate for aldehyde condensates (rubber antioxidants, for2,2'-methylenebis(4-methyl-6-t-butylphenol), with sulfur dichloride for rubber antioxidants, for a benzotriazole uv light stabilizer, for 6-(5-chlorobenzotriazole) deriv, for diazo derivatives.【Vapor Density】5.7【Refractive Index】1.5155 (20 C)First Aid Measures【IngestionNever give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If【InhalationRemove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is【Skin】皮肤【Eyes】眼睛Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.Get medical aidHandling and Storage【Storage【HandlingUse only in a well ventilated area. Avoid contact with skin and eyes. Keep container tightly closed. AvoidHazards Identification【Ingestion【Inhalation【Skin】皮肤【Eyes】眼睛【Hazards【EC Risk PhraseR 34【EC Safety PhraseS 26 36/37/39 45【UN (DOT)】2811Exposure Controls/Personal Protection【Personal ProtectionEyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate【Respirators】呼吸器A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.【Poison Class】毒性等级4Fire Fighting Measures【Flash Point】闪点105【Fire FightingWear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.穿戴自带压力要求（符合或相当）MSHA/NIOSH【Fire PotentialNon-combustible, substance itself does not burn but may decompose upon heating to produce corrosiveAccidental Release Measures【Small spills/leaksClean up spills immediately, using the appropriate protective equipment. Sweep up, then place into aStability and Reactivity【Disposal Code3【Stability【Incompatibilities】非兼容性【Decomposition 】分解【Combustion ProductsTransport Information【UN Number2811 【Hazard Class6.1【Packing GroupI; II; III【HS Code2907 19 00Hazard SymbolsMany countries require Hazard Symbols labeled on the containers of chemicals . These symbols have the following meanings:。

鼻咽癌蛋白质组学的研究进展

ｔａｃｈｙｃａｒｄｉａｒｅｍｏｄｄｉｎｇ２３１３—２３１９．
ｄｏｇｓ［Ｊ］．Ｃｒｉｃｕｌａｔｉｏｎ．２００４，１１０（１６）：
ｎｉｔｒｉｃｏｘｉｄｅｐｒｏｄｕｃｔｉｏｎ
ｓｎｄｉｎｈｉｂｉｔｓ
ａｎｇｉｏｇｅｎｅｓｉｓ
［Ｊ］．Ｃｉｒｃｕｌａｔｉｏｎ。２００２。１０６（８）：９１３－９１９．［１２］Ｓｈｉｒｍｈｉｔａ－ＴａｋｅｓｈｉｔａＡ．ＢｒｕｎｄｅｌＢＪ，ＬａｖｏｉｅＪ．ｅｔ
ＪＨ．ＩｌｌｆｌａＩ枷∞ｉｎ
ｔｈｅ
Ｃ—ｒｅａｃｔｉｖｅ
ｐｒｏｔｅｉｎ
Ｐ，Ｋｏｌｅｔｔｉｓ伽，Ｋｏｕｎｔｏｕｒｉｓ
ａｄｍｉｎｉｓｔｒａｔｉｏｎｒｅｄｕｃｅｓｅａｒｌｙｖｅｒｓｉｏｎ０ｆ
ｐｅｒｓｉｓｔｅｎｔ
ｒｃｃ㈣ｏｅ
Ｅ，ｅｔａ１．ＯｒａｌｖｉｔａｍｉｎＣａｆｔｅｒｅｌｅｃｔｒｉｃａｌｃａｒｄｉｏ－ａｓｓｏｃｉａｔｅｄ
ＭＤ，Ｓｖｅｎｄｓｅｎ
ｓｅｎｅ妇ａｎｄ
ｐｅｒｐ她
ｆｌａｍｍａｔｉｏｎ［Ｊ］．ＩｎｔＪＣａｒｄｉ０１．２００５．１０２（２）：３２１—３２６．［１４］戴金，毛威．炎症与心房颤动关系及机制的研究进展［Ｊ］．心肺血管病杂志．２００８，２７（２）：１２７—１２９．［１５］ＫｕｍａｇａｉＫ．ＮａｋａｓｈｉｍａＨ，ＳａｋｕＫ．ＴｈｅＨＭＣ－ＣｏＡｒｅｄｕｃｔａｓｅｉｎｈｉｈｉ－
宋鑫，杨金亮，唐小海，等．应用血清蛋白组学技术筛选鼻咽癌
９１２、８２９５）建立决策树诊断模型。并对２５例鼻咽癌患【５］
肿瘤抗原［Ｊ］．中国肿瘤生物治疗杂志。２００５．１２（２）：９４－９７．
张文静。易红，李茂玉，等．５－ａｍ－２－ｄ处理鼻咽癌细胞前后的差异白质组学研究［Ｊ］．国际病理科学与ｌ临床杂志，２００７，２７（４）：２７７—２８３．ｏｆａｎｔｉｍｅｔｅｓｔｅｔｉｅ

EDID协议

EDID协议协议名称：EDID协议一、背景和目的EDID（Extended Display Identification Data）协议是一种用于电子显示设备的通信协议，旨在提供关于显示设备的详细信息，以便计算机系统能够正确识别和配置显示设备。

本协议的目的是规范和标准化EDID协议的格式和内容，以确保各种显示设备与计算机系统之间的兼容性和互操作性。

二、定义和缩写1. EDID：Extended Display Identification Data，即扩展显示识别数据。

2. DTD：Detailed Timing Descriptor，即详细时序描述符。

三、协议内容1. EDID文件格式EDID文件是一个二进制文件，由多个数据块组成。

每个数据块的长度为128字节，其中包含了关于显示设备的详细信息。

EDID文件的格式如下：- Header：8字节，用于标识EDID文件的开始。

- Vendor and Product Identification：10字节，包含了制造商和产品的识别信息。

- Basic Display Parameters：18字节，包含了显示设备的基本参数，如分辨率、像素时钟等。

- Color Characteristics：10字节，包含了显示设备的颜色特性信息。

- Established Timings and Standard Timing Identification：35字节，包含了已定义的标准时序和已建立的时序。

- Detailed Timing Descriptors：72字节，包含了显示设备的详细时序描述符。

- Extension Flag：1字节，用于指示是否有扩展数据块。

- Checksum：1字节，用于校验EDID文件的完整性。

2. Vendor and Product IdentificationVendor and Product Identification数据块包含了制造商和产品的识别信息，其格式如下：- Manufacturer ID：3字节，用于标识制造商。

2006年化妆品标准项目计划汇总表

2006年化妆品标准项目计划汇总表
消毒标准委员会2006年制、修订标准项目
2006年地方病、寄生虫病卫生标准项目计划
2006年传染病标准项目计划汇总表
2006年环境卫生标准项目计划
2006年血液卫生标准项目计划汇总表
2006年学校卫生标准制、修订计划项目表
2006年职业病诊断标准项目计划
卫生部2006年食品卫生标准制修订计划项目
2006年放射卫生防护标准项目计划汇总表
2006年职业卫生标准项目计划汇总表
2006年其他卫生标准项目计划汇总表
2006年临床检验标准项目计划汇总表
2006年放射性疾病诊断标准项目计划。

化学品安全技术说明书英文

化学品安全技术说明书英文Chemical Safety Data Sheet (CSDS)。

1. Introduction:The Chemical Safety Data Sheet (CSDS) providesessential information about the safe handling, storage, and disposal of a chemical substance. It serves as a comprehensive guide to ensure the safe use of the chemicalin various settings.2. Product Identification:The CSDS begins with the identification of the chemical, including its name, synonyms, chemical formula, CAS number, and any other relevant identification codes. This section also includes information about the manufacturer orsupplier of the chemical.3. Hazards Identification:In this section, the potential hazards associated with the chemical are described. It includes information about the physical, health, and environmental hazards, such as flammability, toxicity, reactivity, and ecological impact. The CSDS also provides information on the potential routes of exposure and symptoms of exposure.4. Composition/Information on Ingredients:This section provides details about the chemical composition of the substance, including the percentage of each ingredient. It may also include information about impurities or additives that may contribute to the hazards.5. First Aid Measures:The CSDS outlines the recommended first aid procedures to be followed in case of accidental exposure or ingestion of the chemical. It provides instructions on the immediate actions to take, such as rinsing eyes or skin, seeking medical attention, and providing necessary information tohealthcare professionals.6. Firefighting Measures:This section provides guidance on how to handle fires involving the chemical. It includes information on suitable extinguishing methods, fire-fighting equipment, and any specific precautions to be taken to minimize the risks associated with the chemical during a fire.7. Accidental Release Measures:The CSDS provides instructions on how to respond to accidental releases or spills of the chemical. It includes recommendations on containment, cleanup procedures, and appropriate personal protective equipment (PPE) to be used during the cleanup.8. Handling and Storage:This section provides guidelines on the safe handling, storage, and transportation of the chemical. It includesinformation on recommended storage conditions, incompatible substances, and precautions to prevent accidents or exposure.9. Exposure Controls/Personal Protection:The CSDS outlines the recommended exposure limits forthe chemical and provides guidance on implementing appropriate control measures to minimize exposure. This may include engineering controls, such as ventilation systems, as well as personal protective equipment (PPE) requirements.10. Physical and Chemical Properties:This section provides information about the physicaland chemical properties of the chemical, such as appearance, odor, melting point, boiling point, solubility, and stability. It also includes information on pH, viscosity, and any other relevant properties.11. Toxicological Information:The CSDS provides information on the potential health effects of the chemical, including acute and chronic toxicity, routes of exposure, and target organs. It may also include information on carcinogenicity, mutagenicity, and reproductive toxicity.12. Ecological Information:This section provides information on the environmental impact of the chemical, including its potential effects on aquatic organisms, soil, and air. It may also include information on bioaccumulation and persistence in the environment.13. Disposal Considerations:The CSDS provides guidance on the proper disposal methods for the chemical, including any specific regulations or requirements that need to be followed. It may include information on recycling options, treatment methods, or disposal through authorized facilities.14. Transport Information:This section provides information on the safe transportation of the chemical, including any regulations or requirements that need to be followed during transportation. It may include information on packaging, labeling, and any special precautions to be taken.15. Regulatory Information:The CSDS includes information on relevant regulations and legal requirements governing the use, handling, and disposal of the chemical. It may include information on international, national, or local regulations that need to be complied with.16. Other Information:This section may include additional information that is not covered in the previous sections, such as references, revision history, and contact details of the manufacturer or supplier for further inquiries.Please note that the content and format of a Chemical Safety Data Sheet may vary depending on the country or regulatory requirements. The above information provides a general overview of what is typically included in an English version of a CSDS.。

国家认证认可监督管理委员会2006年第22号公告－－第二批有机产品检测机构名录

国家认证认可监督管理委员会2006年第22号公告－－第二批有机产品检测机构名录文章属性•【制定机关】国家认证认可监督管理委员会•【公布日期】2006.08.24•【文号】国家认证认可监督管理委员会2006年第22号公告•【施行日期】2006.08.24•【效力等级】部门规范性文件•【时效性】现行有效•【主题分类】质量管理和监督正文国家认证认可监督管理委员会2006年第22号公告根据《有机产品认证管理办法》（国家质检总局令［2005］第67号）和《关于公布有机产品检测机构名录有关问题的通知》（认办注函[2005]82号）的规定，经审核，现公布第二批有机产品检测机构名录。

各有机产品认证机构对外分包检测业务时需从公布的检测机构名录中选取，并在签署分包业务前核对其计量认证证书和/或认可证书，分包的检测项目应在计量认证或实验室认可范围之内。

特此公告。

附件：第二批有机产品检测机构名单二○○六年八月二十四日附件：第二批有机产品检测机构名单┌───┬──────────────────────────────┬─────┐│ 序号│机构名称│省份│├───┼──────────────────────────────┼─────┤│1│北京锦绣大地农业股份有限公司北京锦绣大地检测中心│北京│├───┼──────────────────────────────┼─────┤│2│甘肃出入境检验检疫局检验检疫综合技术中心中心实验室│甘肃│├───┼──────────────────────────────┼─────┤│3│广东出入境检验检疫局检验检疫技术中心食品实验室│广东│├───┼──────────────────────────────┼─────┤│4│广西壮族自治区产品质量监督检验院│广西│├───┼──────────────────────────────┼─────┤│5│黑龙江出入境检验检疫局检验检疫技术中心│黑龙江│├───┼──────────────────────────────┼─────┤│6│湖南省产品质量监督检验所│湖南│├───┼──────────────────────────────┼─────┤│7│湖南出入境检验检疫局检验检疫技术中心│湖南│├───┼──────────────────────────────┼─────┤│8│江苏出入境检验检疫局动植食中心食品实验室│江苏│├───┼──────────────────────────────┼─────┤│9│国家农副产品质量监督检验中心（南京）│江苏│├───┼──────────────────────────────┼─────┤│10│农业部农产品质量监督检验测试中心（沈阳）│辽宁│├───┼──────────────────────────────┼─────┤│11│银川市环境监测中心站│宁夏│├───┼──────────────────────────────┼─────┤│12│龙口出入境检验检疫局综合技术服务中心│山东│├───┼──────────────────────────────┼─────┤│13│潍坊出入境检验检疫局中心实验室│山东│├───┼──────────────────────────────┼─────┤│14│济南出入境检验检疫局检验检疫技术中心│山东│├───┼──────────────────────────────┼─────┤│15│济宁出入境检验检疫局综合技术服务中心│山东│├───┼──────────────────────────────┼─────┤│16│中国测试技术研究院│四川│├───┼──────────────────────────────┼─────┤│17│农业部食品质量监督检验测试中心（石河子）│新疆│├───┼──────────────────────────────┼─────┤│18│农业部农产品质量监督检验测试中心（昆明）│云南│├───┼──────────────────────────────┼─────┤│19│国家水产品及加工食品监督检验中心│浙江│└───┴──────────────────────────────┴─────┘。

质量管理体系术语

一组质量管理体系术语(中英双语)上一篇/ 下一篇 2006—06-21 19：34:29 / 天气：晴朗/ 心情：高兴查看（1369 ）/ 评论( 17 )一组质量管理体系术语(中英双语）English Chinesereceipt (入厂)接受，验收,进货handling 搬运packaging 包装storage 保存protection 保护comparison 比较identification 标识replacement of identification mark 标识标志更换maintenance of identification 标识的保持records of identification control 标识控制记录tender 标书normative document 标准文件supplemental 补充nonconforming product 不合格品control of nonconforming product 不合格品控制control procedure of nonconforming products 不合格品控制程序tendency of nonconformance 不合格倾向purchasing 采购verification of purchased product 采购的产品验证purchasing process 采购过程purchasing control procedure 采购控制程序purchasing information 采购信息reference standard 参照标准reference instructions 参照细则stockhouse 仓库measurement，analysis and improvement 测量，分析和改进measurement result 测量结果control procedure of monitoring and measuring devices 测量设备控制程序planning 策划preservation of product 产品保护control procedure for maintenance, replacement and records of product identification 产品标识的保持, 更换及记录控制程序procedure for product identification and traceability 产品标识和可追溯性程序conformity of product 产品的符合性monitoring and measurement of product 产品的监督和测量product plan 产品方案control procedure for product preservation 产品防护控制程序method of product release 产品放行方法conformity of product,product conformity 产品符合性product realization 产品实现planning of product realization 产品实现策划product characteristics 产品特性input to product requirements 产品要求的输入product status 产品状态final acceptance of product 产品最后验收procedure 程序program documents 程序文件continual improvement 持续改进procedure for continual improvement of quality management system 持续改进质量体系程序adequacy 充分性storage location 存放地点agency personnel 代理人员submission of tenders 递交标书adjustment 调整，调节statutory and regulatory requirements 法律法规要求rework，vt 返工repair, vt 返修subcontractor 分承包方annex 附录improvement 改进improvement actions 改进措施on-the—job training 岗位技能培训responsibility of individual department and post 各部门，各岗位职责change identification 更改标记change order number 更改单编号process sheets 工艺单process specification 工艺规程procedure（process card) 工艺规程（工艺卡)process characteristics 工艺特性Job Description Format 工种描述单work environment 工作环境impartiality 公正性functional requirements 功能要求supplier 供方supplier evaluation procedure 供方评价程序supplier provided special processes 供方提供的特殊过程verification at supplier’s premises 供方现场验证supply chain 供应链criteria for supplier selection, evaluation and re—evaluation 供应商选择、评估和再评估准则communication 沟通customer 顾客customer property 顾客财产control procedure for customer property 顾客财产控制程序customer feedback 顾客反馈Customer Service Contact Form 顾客服务联系表customer cummunications 顾客沟通customer satisfaction 顾客满意statistical analysis of customer satisfaction 顾客满意度统计分析customer complaint 顾客投诉identificaion of customer requirements 顾客要求的识别management review 管理评审records from management review 管理评审记录management review control procedure 管理评审控制程序management representative 管理者代表management responsibility 管理职责specified limits of acceptability 规定的可接受界限specified use 规定的用途process 过程complexity of processes 过程的复杂性monitoring and measurement of processes 过程的监视和测量operation of process 过程的运行status of processes 过程的状态process approach 过程方法process controls 过程控制process control documents 过程控制文件process performance 过程业绩appropriateness 合适性changes to contractor 合同的更改contract review control procedure 合同评审控制程序internet sales 互联网销售environmental conditions 环境条件monogram pragram requirements 会标纲要要求type of activities 活动类型infrastructure 基础建设infrastructure 基础设施fundamentals and vocabulary 基础与词汇control of records 记录控制technical specificaion 技术规范process trace sheet 加工跟踪单monitoring and measurement 监视和测量monitoring and measuring device 监视和测量装置control of monitoring and measuring devices 监视和测量装置控制check method 检查方法frequency of checks 检查频次calibration status 检定状态inspection and test control procedure 检验和试验控制程序identification procedure for inspection and test status 检验和试验状态标识程序inspection witness point 检验见证点inspection hold point 检验停止点buildings 建筑物delivery 交付post—delivery activities 交付后的活动delivery activities 交付活动interface 接口acceptance of contract or orders 接受合同或定单type of medium 介质类型experience 经验correction action 纠正措施Corrective action response time 纠正措施答复时间，纠正措施响应时间management procedure for corrective actions 纠正措施管理程序corrective action response times 纠正措施响应时间development activity 开发活动traceability mark 可追溯性标志objectivity 客观性Customer Service Log 客户服务记录簿control feature 控制特性，控制细节control features 控制细则periodic assessment of stock 库存定期评估justification 理由routine 例程,惯例，常规质量职能分配表论证范围internal communication 内部沟通internal audit 内部审核internal audit procedure 内部审核程序internally controlled standard 内控标准internal audit 内审results of internal and external audits 内外部审核结果competence 能力training 培训training needs 培训需要evaluate 评价records of the results of the review 评审结果的记录review output 评审输出review input 评审输入Purchase Requisition 请购单authority 权限validation 确认concession 让步human resources 人力资源job training of personnel 人员岗位培训qualification of personnel 人员资格equipment control procedure 设备控制程序device type 设备类型order of design changes 设计更改通知单design and development control procedure 设计和开发控制程序design and development 设计开发design and development planning 设计开发策划control of design and development changes 设计开发更改控制design and development review 设计开发评审design and development validation 设计开发确认design and development outputs 设计开发输出design and development inputs 设计开发输入design and development verification 设计开发验证design validation 设计确认design documentation 设计文件编制design acceptance criteria 设计验收准则design verification 设计验证audit program 审核大纲conduct of audits 审核行为audit criteria 审核准则production process control 生产过程控制production process control procedure 生产过程控制程序production and service provision 生产和服务提供control of production and service provision 生产和服务提供的控制validation of processes for production and service provision 生产和服务提供过程的确认production order 生产令identification and traceability 识别和可追溯性identification and traceability maintenance and replacement 识别和可追溯性维护与替换invalidate 使失效market survey 市场调研suitability 适宜性scope 适用范围controlled condition 受控状态terms and definitions 术语与定义analysis of data 数据分析sequence 顺序transfer of ownership 所有权转移system document 体系文件statistical technique 统计方法outsource（vt) a process 外包过程external source 外部来源documents of external origin 外来文件outsource, vt 外协unique identification 唯一的标识maintenance 维护Document Change Control 文件更改控制Request For Document Change (RDC) 文件更改需求单control of documents 文件控制documentation requirements 文件要求enquiry 问询，询价field nonconformity analysis 现场不符合分析relevance 相关性interaction 相互作用detail design 详细设计，详图设计，零件设计，施工设计sales department 销售部sales contract 销售合同checklist 校验表,一览表,检查一览表calibration 校准submission of action plans 行动计划的递交documented procedures 形成文件的程序documented statement 形成文件的声明performance requirements 性能要求licensee responsibilities 许可证持有者责任acceptance criteria 验收准则verification arrangement 验证安排verification results 验证结果customer focus 以客户为关注点，以客户为焦点awareness 意识introduction 引言，概述,介绍normative references 引用标准application 应用visit to user 用户访问review of requirements related to the product 有关产品的要求评审competent 有能力的effectiveness 有效性determination of requirements related to the product 与产品有关的要求的确定customer—related processes 与顾客有关的过程preventive action 预防措施management procedure for preventive actions 预防措施管理程序planned results 预期的结果intended use 预期的用途procedure for competence，knowledge and training of personnel 员工能力, 知识和培训程序personnel training procedure 员工培训程序supporting services 支持性服务functions 职能部门responsibility 职责assignment of responsibility 职责分工workmanship 制造工艺manufacturing acceptance criteria 制造验收准则quality policy 质量方针quality programs 质量纲领quality management system 质量管理体系quality management system planning 质量管理体系策划performance of the quality management system 质量管理体系业绩quality plan 质量计划quality records 质量记录quality objectives 质量目标quality audit 质量审核quality manual 质量手册quality problem handling form 质量问题处理单quality requirements 质量要求allocation table of quality responsibilities 质量职能分配表availability of resources 资源的可获得性resource management 资源管理allocation of resources 资源配置provision of resources 资源提供general requirements 总要求，一般要求constituent part 组成部件organization 组织continual improvement of the organization 组织的持续改进size of organization 组织的规模Organizational Diagram 组织机构图final acceptance 最终验收work instructions 作业指导书下面总结范文为赠送的资料不需要的朋友，下载后可以编辑删除!祝各位朋友生活愉快!员工年终工作总结【范文一】201x年就快结束,回首201x年的工作，有硕果累累的喜悦，有与同事协同攻关的艰辛,也有遇到困难和挫折时惆怅，时光过得飞快，不知不觉中，充满希望的201x年就伴随着新年伊始即将临近。

产品标识和可追溯性控制程序(中英文)

产品标识和可追溯性控制程序Product Identification and Traceability Control Procedure（ISO9001：2015）1目的：Purpose使所有的物料从购进到交付，都可以由其位置、所贴标签等标识清晰识别，并且可以由标识追溯到相关的人、机、法、环、料。

To make all materials can be clearly identified from purchase to delivery through the place and labels that be marked, and can be traced to relevant personnel, machine, law, environment and materials by the identification.2 适用范围：scope本程序适用于公司所有物料从购进到交付的各个阶段。

Be applicable to each stage of all company materials from coming in to delivery.3 程序：Process:3.1 标识Identification:3.1.1 从原材料到成品，所有的物料都必须按其质检状态放置在规定的区域内。

All materials that from raw material to finished products should be placed in the stipulated areas as per the inspection status.3.1.2 原材料和成品包装上必须有标签可以明确识别其型号、数量、质检状态、物料批次等Packages of raw materials and finished products should have labels that can be used to clearly identify the type, quantity, inspection status, material lot number and etc.3.1.3 车间流动的半成品通过生产流程卡识别其型号、物料批次等。

计量器具型式批准查询

计量器具型式批准查询号制造单位序计量器具名称及型号规格证书编号批准日期1.日本岛津制作所2.美国HACH公司3.美国HACH公紫外可见近红外分光光度计（UV-3600型）2007-C10120070110在线余氯测定仪（CL17型）2007-C10220070110可见分光光度计（DR2800型）2007-C10320070110司4.英国热电公司紫外可见分光光度计（Evolution300型）2007-C104200701105.英国热电公司紫外可见分光光度计（Heliosα型）2007-C105200701106.美国AMETEK磁致伸缩液位仪（7100/7252/7255/7300/7331/DM330/2007-L10620070110 Automation&Process Technologies7.美国DionexCorporation8.日本东亚DKK株式会社9.日本东亚DKK株式会社10.德国Endress+HauserWetzer11.德国Envitec WismarGmbH12.美国EmersonProcess ManagementRosemount Inc. 13.美国EmersonProcess ManagementRosemount Inc.DM231/H-1000/HMT-900/RTL-750B型）高效液相色谱仪（UltiMate3000型）2007-C10720070110 COD自动测定装置（COD-203/COD-203（S）型）2007-C10820070110总磷总氮在线测定装置（NPW-150/NPW-150（S）型）2007-C10920070110流量、能量管理器（RMC621/RMS621型）2007-F11020070110呼出气体酒精含量探测器（AlcoQuant6020型）规格：2007-C11120070118 BAC（0~500）mg/100ML，BrAC（0~2.2）mg/L 差压流量计（3051SFC型）2007-F11220070119压力变送器（4500，951型）2007-F1132007012314.日本尼德克公司（Nidek Co.，Ltd）15.日本尼德克公司（Nidek Co.，Ltd）16.日本尼德克公司焦度计（LM-1000（P）/LM-1200型）规格：-25D~+25D（球镜度）验光机（AR-330A/AR-310A型）规格：-30D~+25D（球镜度）验光机（ARK-530A/ARK-510A型）规格：-30D~+25D2007-C114200701262007-C115200701262007-C11620070126（Nidek Co.，Ltd）17.韩国POTEC Co.，Ltd18.韩国POTEC Co.，Ltd19.韩国HUVITZ Co.，Ltd20.韩国HUVITZ Co.，Ltd21.韩国HUVITZ Co.，Ltd （球镜度）验光机（PR-5000型）规格：-25D~+22D（球镜度）2007-C11720070126验光机（PRK-5000型）规格：-25D~+22D（球镜度）2007-C11820070126验光机（MR-3100P型）规格：-25D~+22D（球镜度）2007-C11920070126验光机（MRK-3100P 型）规格：-25D~+22D（球镜度）2007-C12020070126焦度计（CLM-3100P型）规格：-25D~+22D（球镜度）2007-C1212007012622.加拿大SiemensMilltronics ProcessInstruments Inc. 23.加拿大SiemensMilltronics ProcessInstruments Inc. 24.加拿大SiemensMilltronics ProcessInstruments Inc. 25.加拿大SiemensMilltronics Process 超声波物位计（SITRANS LU01/02/10，MiltiRanger100/200，HydroRanger200，HydroRanger Plus,SITRANSLUC500,SITRANS Probe LU,The Probe,OCM III型）雷达物位计（SITRANS LR200，SITRANS LR250/260，SITRANS LR300，SITRANS LR400,SITRANSLR460,SITRANS Probe LR型）点式物位计（PointekCLS100/200/300/500，SITRANSPD500，Pointek ULS200,Pointek LPS200,Pointek LVS200型）电容式物位计（SITRANS LC300，SITRANS LC500型）2007-L122200701262007-L123200701262007-L124200701262007-L12520070126Instruments Inc26.德国连续气体分析仪EL-3000（Uras26）型2007-C126200701261号ABBAutomationProducts GmbH编号日期27.德国ABBAutomationProducts GmbH 28.德国ABBAutomationProducts GmbH 连续气体分析仪EL-3000（Caldos27）型2007-C12720070126连续气体分析仪EL-3000（Magnos206）型2007-C1282007012629.美国Abbott血细胞分析仪（CELL-DYN Sapphire，CELL-DYN2007-C12920070126Laboratories公司4000，CELL-DYN3700SL/CS，CELL-DYN3500，CELL-DYN Ruby，CELL-DYN3200，CELL-DYN3000型）30.美国Abbott血细胞分析仪（CELL-DYN1800，CELL-DYN1700，2007-C130********Laboratories公司CELL-DYN1600，CELL-DYN1400，CELL-DYN1200型）31.意大利HANNA电导率仪（HI4321/4521/4522型）规格：（0~999.9）2007-C131********Instruments mS/cm32.意大利HANNA笔式电导率仪（HI2007-C132********Instruments98303/98301/98302/98304/98308/98309/98311/98186/98188型）规格：（0~1999）μS/cm33.意大利HANNA电导率仪（HI8733/9033/9835/98312/98321/98322/983602007-C133********Instruments型）规格：0.0μS/cm~199.9）mS/cm分四档34.意大利HANNA pH计（HI4212/4211/4221/4222型）规格：2007-C134********Instruments（0.00~14.00）pH35.意大利HANNA pH计（HI99141型）规格：（0.00~14.00）pH2007-C135********Instruments36.意大利HANNA台式pH/?C测定仪（HI208/253/255型）2007-C136********Instruments规格：（0.00~14.00）pH37.意大利HANNA便携式pH计（HI9024/9025/9026型）规格：2007-C137********Instruments（0.00~14.00）pH38.意大利HANNA便携式pH计/?C测定仪(HI2007-C138********Instruments98183/98180/98181/98182/98185/991001/991 002/991003型）规格：（0.00~14.00）pH39.意大利HANNA pH计(HI211/200/213/122/123/221/223型）2007-C139********Instruments规格：（0.00~14.00）pH40.意大利HANNA pH计(HI8424型）规格：（0.00~14.00）pH2007-C14020070126Instruments41.意大利HANNA pH计(HI98128/98120/98121/98127/98129/98130/981072007-C14120070126Instruments/9804/9828型）规格：（0.00~14.00）pH42.德国Honeywell冷/热量表（EM06型）2007-T1422007012643.日本光电工业株式自动血细胞分析仪（MEK-6400C，MEK-6410C，MEK-2007-C14320070131会社6420C，MEK-6318C型）规格：白细胞三分类44.日本光电工业株式自动血细胞分析仪（MEK-7222K，MEK-8222K型）规2007-C14420070131会社格：白细胞五分类45.日本新宇宙电机株便携式可燃气体检测仪（XP-3140型）规格：（0～100）式会社（New%V olCosmos ElectricCo.,Ltd）46.日本新宇宙电机株便携式可燃气体检测仪（XP-3120，XP-3160，XP-707II式会社（New型）Cosmos ElectricCo.,Ltd）47.日本新宇宙电机株便携式可燃气体检测仪（XP-3110型）规格：（0～100）式会社（New%LELCosmos ElectricCo.,Ltd）48.澳大利亚Electro威尔巴流量传感器（VRB62型）规格：DN50mm～2007-C14520070131 2007-C14620070131 2007-C14720070131 2007-F14820070205Chemical15000mm2号EngineeringPTY.LTD编号日期49.美国奥豪斯公司50.日本新宇宙电机株式会社（NewCosmos ElectricCo.,Ltd）51.日本新宇宙电机株式会社（NewCosmos ElectricCo.,Ltd）52.美国ASHCROFTINC.53.美国ASHCROFTINC.电子天平（DV215CD,DV114C,DV214C,DV314C型）2007-F14920070207固定式可燃气体检测仪（KD-12型）规格：（0～100）2007-C150********%LEL复合式可燃气体检测仪（XP-302M，XP-3118，XP-2007-C151******** 3128，XP-3168型）HEISE压力校验仪（PTE-1，ST-2H，PM，CC，CM，2007-F152******** CMM型ASHCROFT压力表（T5500/T6500，1279/1377/2462，2007-F153******** 1379，1187，1188，1189，1008，1009，1032，1082，5503，5509型）54.德国MACHEREY-光度计（500D型）2007-C15420070306NAGEL GmbH&Co.KG55.台湾奥特盟应用科酸碱度控制器（PD-100，PD-10C型）规格：2007-C155********技有限公司（0.00~14.00）pH56.日本株式会社电子全站仪（SET530R3型）2007-L156********索佳57.德国Dr.A.KuntzeGmbH58.德国Dr.A.KuntzeGmbH59.美国AgilentTechnologies,Inc.在线水质分析仪（K100型）2007-C157********在线水质多参数分析仪（K301型）2007-C158******** 气相色谱仪（7890A型）规格：TCD，FID，micro-2007-C159******** ECD，NPD，FPD60.德国Bizerba GmbH&Co.KG61.德国Bizerba GmbH&Co.KG62.德国Bizerba GmbH 称重显示控制器（BT，BT-B，BT-Z2型）规格：（1~65）kg，（1~120000）kg电子秤（NT，NT-B型）规格：（1~65）kg，（1~120000）kg非自动衡器（ST，ST-B，ST-Ex型）2007-F160200703152007-F161200703152007-F16220070315&Co.KG63.美国Mortara器械有限公司64.美国Mortara器械有限公司65.日本株式会社富永制作所66.美国Mortara器械有限公司规格：（1~65）kg，（1~120000）kg心电图机（ELI150型）二七年三月十2007-R16320070315五日动态心电记录器（H3+型）2007-R16420070315流量测量变换器（FM1-1型）2007-F16520070315动态心电记录器（X12+型）2007-R166********67.英国Krohne Ltd.质量流量计（OPTIMASS1300型）2007-F16720070315（一体型：传感器OPTIMASS1000、转换器：MFC300C，分体型：传感器OPTIMASS1000、转换器MFC300F）68.德国KSR-磁翻柱式液位计（BNA/UTN型）2007-L16820070405KUEBLER Nivau-Messtechnik AG69.德国Honeywell冷/热量表（EMB06型）2007-T1692007040570.日本Nikon（尼康）全站仪（DTM-452C，DTM-432C，DTM-452C（免棱镜2007-L17020070405公司型）型）3号制造单位序计量器具名称及型号规格证书编号批准日期71.美国Ametek液位仪（509-15/16/17/19，508-45/46/47/49，509-2007-L17120070405Drexelbrook公司75/76/77/79，509-85，CM-6,US-11/12/21/22,USR-21,CCS4000,DR7000,DR7100型）72.美国瓦里安公司全谱直读等离子体发射光谱仪700ES系列（710，715，720，725，730，735型）73.日本A&D CO,LTD.电子天平(FX-120i,FX-200i,FX-300i,FX-1200i,FX-2000i,FX-3000i型）74.日本A&D CO,LTD.电子分析天平(GH-120,GH-200,GH-300,GH-202,GH-252型）75.德国seca gmbh&非自动衡器(665×2，665×1，635×2，635×1，6452007-C17220070423 2007-F173******** 2007-F17420070510 2006-F175********co.kg.×2，645×1，675×2，675×1，657×2，657×1，677×2，677×1，685×2，685×1型）76.美国ABB公司天然气气相色谱仪(NGC8200型）2007-C176********77.美国3M Co.多种气体检测仪(950型）2007-C178********78.美国3M Co.单一气体检测仪(450型）2007-C1792007052579.韩国Dong-il在线COD监测仪(DIGS-300型）2007-C180********Greensys Co.,Ltd80.美国FLUKE Co.环境空气测量仪(975型）2007-C181********81.瑞典Emerson雷达液位计(5401，5402，5600型）2007-C182********Management SaabRosemount TankRadar AB公司82.瑞士徕卡测量系统手持激光测距仪(DISTOTMA8型）2007-L183********股份有限公司83.瑞士徕卡测量系统手持激光测距仪(DISTOTMA5型）2007-L184********股份有限公司84.日本日立公司荧光分光光度计(F-7000型）2007-C185********（Hitachi High-规格：200nm~750nm(可扩展至900nm)TechnologiesCorporation）85.英国FMC压差式流量计(OrificeMaster/MeasureMaster型）2007-F186********TECHNOLOGIESLtd.86.英国Lloyd材料试验机(LFPlus，TAPlus，FTPlus，LRXPlus，2007-F187********Instruments Ltd.LR5KPlus，LR10KPlus，LR30KPlus，LR50KPlus，LR100KPlus，LR150KPlus，EZ20，EZ50，LS100Plus型）87.德国Durag Industrie烟尘浊度监测仪(D-R216型）规格：（4.00~20.00）2007-C188********Elektronik GmbH&mA[对应烟尘浊度（0~100）%]Co KG88.日本横河电机株式浊度分析仪(TB750G型）2007-C189********会社（YokogawaElectricCorporation）89.日本横河电机株式电导率仪(SC402型）2007-C19020070615会社（YokogawaElectricCorporation）90.日本TOPCON公TOPCON HIPER十测地型双频RTK GPS接收机(HIPER2007-L19120070615司十型）91.德国差压式流量计(Flowcom2000/FlowcomS8型）2007-F19220070618Flow&InstrumentsEngineering GmbH92.瑞士Precisa分析天平(XR125SM,XR125SM-FR,XR205SM-2007-F19320070618Instruments AG DR,XR305A,XR405A,XR405A-FR型）93.瑞士Precisa水份分析仪(XM60，XM120型）2007-C194200706184。

MSDS

MATERIAL SAFETY DATE SHEET RMATION OF MANUFACTURER/SUPPLIER2.PRODUCT IDENTIFICATION3.HEALTH HAZARD DATA4.FIRST AID MEASURES5.FIRE AND EXPLORATION HAZARD DATA6.SPILL AND LEAKAGE PRODUCTS7.HANDLING AND STOAGE MEASURES8.EXPOSURE PREVENTION MEASURES9.PHYSICAL AND CHEMICAL PROPERTIES10.REACTIVITY AND STABILITY PROPERTIES11.TOXICOLOGICAL INFORMATIONS12.ECOLOGICAL INFORMA TIONS13.DISPOSAL CONSIDERA TIONS14.TRANSPORA TION INFORMATION15.REGULA TORY INFORMA TIONS16.FURTHER INFORMA TIONSREFERENCE LIST:-RAW MAERIAL DA TA BASE(JAPANESS PAINT MANUFACTURES ASSOCIA TION)-SOLVENT POCKET BOOK(YUUKIE KAGAKU KYOKAI)-INTERNA TIONAL CHEMICAL SUBSTANCE SAFETY CARD(KAGAKU KOGYO NIPPON)-REGISTRY OF TOXIC EFFECTS OF CHEMICAL SUBSTANCE(NIOSH)-ACGIH:1990-1991 THRESHOLD LIMIT VALUES FOR CHEMICAL SUBSTANCE AND PHYSICAL AGENTS.-HAND BOOK OF HAZARDS AND HARM OF CHEMICAL SUBSTANCE(CHUOH RODOHSAIGAI BOHSHI KYOKAI)-DA TA BOOK OF HAZARDOUS SUBSTANCE(MARUZEN)REMARKS:-THE INFORMA TION HEREIN IS GIVEN IN GOOD FAITH,BOT NO WARRANTY,EXPRESSED OR IMPLIED,IS MADE.-THE INFORMA TION IS CORRECT A T THE TIME OF PREPARA TION,IT IS SUBJECT TO REVISION FROM TIME TO TIME WITHOUT NOTICE. MA TERIAL SAFETY DA TE SHEETRMATION OF MANUFACTURER/SUPPLIER2.PRODUCT IDENTIFICA TION3.HEALTH HAZARD DA TE4.FIRST AID MEASURES5.FIRE AND EXPLORA TION HAZARD DATE6.SPILL AND LEAKAGE PROCEDURESSHOULD BE DISPOSE IN ACCORDANCE TO ALL LOCAL REGULA TIONS.7.HANDLING AND STOAGE MEASURES8.EXPOSURE PREVENTION MEASURES9.PHYSICAL AND CHEMICAL PROPERTIES10.REACTIVITY AND STABILITY PROPERTIES11.TOXICOLOGICAL INFORMATIONS12.ECOLOGICAL INFORMA TIONS13.DISPOSAL CONSIDERA TIONS14.TRANSPORTA TION INFORMA TION15.REGULA TORY INFORMA TIONS16.FURTHER INFORMA TIONSREFERENCEE LIST:RAW MA TERIAL DA TE BASE(JIAPANESE PAINT MANUFACTURES ASSOCIA TION)SOLVENT POCKET BOOK(YUUKIE KAGAKU KYOKAI)INTERNA TIONAL CHEMICAL SUBSTANCE SAFETY CARD(KAGAKU KOGYO NIPPON)REGISTRY OF TOXIC EFFECTS OF CHEMICAL SUBSTANCE(NIOSH)ACGIH:1990-1991 THRESHOLD LIMIT VALUES FOR CHEMICAL SUBSTANCES AND PHYSICAL AGENTS.HAND BOOK OF HAZARDS AND HARM OF CHEMICAL SUBSTANCE (CHUOH RODOHSAIGAI BOHSHI KYOKAI)DA TE BOOK OF HAZARDOUS SUBSTANCE(MARUZEN)REMARKSTHE INFORMA TION HEREIN IS GIVEN IN GOOD FAITH.BUT NO WARRANTY.EXPRESSED OR IMPLIED. IS MADE.THE INFORMA TION IS CORRECT A T THE TIME OF PREPARATION,IT IS SUBJECT TO REVISION FROM TIME TO TIME WITHOUT NOTIE.。

顺络高频电感规格书

Multilayer Chip Ceramic Inductor – SDCL-D SeriesOperating Temp. : SDCL1005 series: -55℃~+125℃SDCL1608 series: -40℃~+85℃FEATURES●Monolithic structure for high reliability● High self-resonant frequency● Excellent solderability and high heat resistanceAPPLICATIONS●RF circuit in telecommunication and other equipmentsPRODUCT IDENTIFICATIONSHAPE AND DIMENSIONSUnit: mm [inch]Type L W T a SDCL1005[0402]1.0±0.15 [.039±.006]0.5±0.15 [.020±.006]0.5±0.15 [.020±.006]0.25±0.1 [.010±.004]Fig.11.6±0.15 [.063±.006]SDCL1608 [0603] 1.65±0.15 [.065±.006]0.8±0.15 [.031±.006]0.8±0.15 [.031±.006] 0.3±0.2 [.012±.008]Fig.2②External Dimensions (L×W) (mm)1005 [0402] 1.0×0.5 1608 [0603] 1.6×0.8 ① Type SDCL Chip Ceramic Inductor③ Material Code C ④ Nominal Inductance Example Nominal Value 3N9 3.9nH 10N 10nH R10 100nH※R= Decimal Point ，N=nH ⑤Inductance ToleranceS ±0.3nH J ±5%K ±10% ⑥ Packing T Tape & Reel ⑧Hazardous Substance Free Products FSDCL ① 1608② C ③ 10N ④ J ⑤ T⑥ D ⑦ F ⑧ ⑦Internal Code D Fig.1Fig.2SPECIFICATIONSSDCL1005-D TYPETypical Q @ Freq. (MHz)Part Number InductanceMin. Qual i t y FactorL,Q Test Freq.L/Q 1008001000Min. Self-resonant FrequencyMax. DCResistanceMax.RatedCurrent ThicknessUnits nH - MHz - MHz Ω mA mm [inch]SymbolL Q Freq Q S.R.F DCR Ir T SDCL1005C1N0STDF 1.0±0.3 8 10011 34 36 10000 0.10 400 SDCL1005C1N1STDF 1.1±0.38 10011 34 36 10000 0.10 400 SDCL1005C1N2STDF 1.2±0.38 10011 34 36 10000 0.10 400 SDCL1005C1N3STDF 1.3±0.38 10011 34 36 10000 0.10 400 SDCL1005C1N5STDF 1.5±0.38 10011 34 36 6000 0.10 300 SDCL1005C1N6STDF 1.6±0.38 10011 32 35 6000 0.10 300 SDCL1005C1N8STDF 1.8±0.38 10011 30 34 6000 0.10 300 SDCL1005C2N0STDF 2.0±0.38 10010 29 33 6000 0.20 300 SDCL1005C2N2STDF 2.2±0.38 10010 29 33 6000 0.20 300 SDCL1005C2N4STDF 2.4±0.38 10010 29 32 6000 0.20 300 SDCL1005C2N7STDF 2.7±0.38 10010 29 32 6000 0.20 300 SDCL1005C3N0STDF 3.0±0.38 10010 29 32 6000 0.20 300 SDCL1005C3N3STDF 3.3±0.38 10010 29 32 6000 0.20 300 SDCL1005C3N6STDF 3.6±0.38 10010 28 31 4000 0.20 300 SDCL1005C3N9STDF 3.9±0.38 10010 28 31 4000 0.20 300 SDCL1005C4N3STDF 4.3±0.38 10010 28 31 4000 0.20 300 SDCL1005C4N7STDF 4.7±0.38 10010 28 31 4000 0.20 300 SDCL1005C5N1STDF 5.1±0.38 10010 28 30 4000 0.30 300 SDCL1005C5N6STDF 5.6±0.38 10010 28 30 4000 0.30 300 SDCL1005C6N2STDF 6.2±0.38 10010 27 30 3900 0.30 300 SDCL1005C6N8□TDF 6.8 8 10010 27 30 3900 0.30 300 SDCL1005C7N5□TDF 7.5 8 10010 27 30 3700 0.40 300SDCL1005C8N2□TDF 8.2 8 10010 27 30 3600 0.40 300SDCL1005C9N1□TDF 9.1 8 10010 27 30 3400 0.40 300 SDCL1005C10N □TDF 10 8 10010 27 30 3200 0.40 300 SDCL1005C12N □TDF 12 8 10010 26 29 2700 0.50 300 SDCL1005C15N □TDF 15 8 10010 26 28 2300 0.50 300 SDCL1005C18N □TDF 18 8 10010 25 27 2100 0.60 300 SDCL1005C20N □TDF 20 8 10010 25 26 2000 0.60 300 SDCL1005C22N □TDF 22 8 10010 25 25 1900 0.60 300 SDCL1005C27N □TDF 27 8 10010 25 23 1600 0.70 300 SDCL1005C33N □TDF 33 8 10010 22 22 1300 0.80 200 SDCL1005C39N □TDF 39 8 10010 22 19 1200 1.00 200 SDCL1005C43N □TDF 43 8 10010 21 16 1100 1.10 200 SDCL1005C47N □TDF 47 8 10010 21 16 1000 1.10 200 SDCL1005C56N □TDF 56 8 10010 18 13 750 1.20 200 SDCL1005C68N □TDF 68 8 10010 18 9 750 1.40 180 SDCL1005C82N □TDF 82 8 10010 13 - 750 2.40 150 SDCL1005CR10□TDF 100 8 10010 12 - 700 2.60 150SDCL1005CR12□TDF 120 8 10010 - - 600 2.80 150SDCL1005CR15□TDF 150 8 10010 - - 550 3.20 100 SDCL1005CR18□TDF 180 8 10010 - - 500 3.70 100 SDCL1005CR22□TDF 220 8 10012 - - 450 4.00 100 SDCL1005CR27□TDF 270 8 10012 - - 400 4.50 100 SDCL1005CR33□TDF 330 6 50 - - - 350 7.00 500.5±0.15[.020±.006]※□: Please specify the inductance tolerance code (J=±5%, K=±10%). The product with tolerance less than ±5%, ±10% isalso available. Please contact your local sales.SPECIFICATIONSSDCL1608-D TYPETypical Q @ Freq. (MHz)Part NumberInductanceMin. Qual i t y FactorL,Q Test Freq. L/Q1008001000Min.Self-resonantFrequencyMax. DC Resistance Max.RatedCurrentThicknessUnits nH - MHz - MHz Ω mA mm [inch]SymbolL Q Freq Q S.R.F DCR Ir T SDCL1608C1N0STDF 1.0±0.38 100 13 70 80 10000 0.05 500 SDCL1608C1N2STDF 1.2±0.38 100 13 60 70 10000 0.05 500 SDCL1608C1N5STDF 1.5±0.38 100 13 47 68 6000 0.10 500 SDCL1608C1N8STDF 1.8±0.38 100 13 45 61 6000 0.10 500 SDCL1608C2N2STDF 2.2±0.38 100 13 45 60 6000 0.10 500 SDCL1608C2N7STDF 2.7±0.310 100 13 44 55 6000 0.12 500 SDCL1608C3N3STDF 3.3±0.310 100 13 43 50 6000 0.15 500 SDCL1608C3N9STDF 3.9±0.310 100 13 43 50 6000 0.16 500 SDCL1608C4N7STDF 4.7±0.310 100 13 43 50 6000 0.20 500 SDCL1608C5N6STDF 5.6±0.310 100 14 42 48 5000 0.25 500 SDCL1608C6N8□TDF 6.8 10 100 14 43 50 5000 0.30 500 SDCL1608C8N2□TDF 8.2 10 100 14 43 48 4500 0.35 500 SDCL1608C10N □TDF 10 12 100 15 45 50 3500 0.40 300 SDCL1608C12N □TDF 12 12 100 18 48 50 3000 0.45 300 SDCL1608C15N □TDF 15 12 100 18 48 50 2300 0.50 300 SDCL1608C18N □TDF 18 12 100 16 48 51 2200 0.55 300 SDCL1608C22N □TDF 22 12 100 16 45 48 2000 0.60 300 SDCL1608C27N □TDF 27 12 100 16 45 45 1700 0.65 300 SDCL1608C33N □TDF 33 12 100 16 45 41 1500 0.70 300SDCL1608C39N □TDF 39 12 100 17 40 48 1400 0.70 300 SDCL1608C47N □TDF 47 12 100 17 35 35 1200 0.70 300 SDCL1608C56N □TDF 56 12 100 17 35 30 1100 0.75 300 SDCL1608C68N □TDF 68 12 100 17 30 20 900 0.85 300 SDCL1608C82N □TDF 82 8 100 15 22 - 800 1.00 300 SDCL1608CR10□TDF 100 8 100 15 16 - 700 1.20 300 SDCL1608CR12□TDF* 120 8 50 15 - - 600 1.40 200 SDCL1608CR15□TDF* 150 8 50 15 - - 500 1.60 200 SDCL1608CR18□TDF* 180 8 50 15 - - 400 1.90 200 SDCL1608CR22□TDF* 220 8 50 15 - - 350 2.40 200 SDCL1608CR27□TDF* 270 8 50 16 - - 350 2.60 150 SDCL1608CR33□TDF* 330 8 50 16 - - 350 2.80 150 SDCL1608CR39□TDF* 390 8 50 16 - - 300 3.20 150 SDCL1608CR43□TDF* 430 8 50 16 - - 280 3.40 150 SDCL1608CR47□TDF* 470 8 50 15 - - 250 3.60 150 SDCL1608CR56□TDF* 560 8 50 15 - - 250 4.00 100 SDCL1608CR68□TDF*680 8 50 15 - - 250 4.50 1000.8±0.15[.031±.006]※□: Please specify the inductance tolerance code (J=±5%, K=±10%). The product with tolerance less than ±5%, ±10% isalso available. Please contact your local sales.※*: The length: 1.65±0.15mm, for others: 1.60±0.15mm.TYPICAL ELECTRICAL CHARACTERISTICSSDCL1005-D TYPE SDCL1005-D TYPEFrequency(MHz)I n d u c t a n c e (n H )Frequency(MHz)0QSDCL1608-D TYPE SDCL1608-D TYPEFrequency(MHz)I n d u c t a n c e (n H )Frequency(MHz)0Q。

供应链管理丨中英双语·质量管理体系术语

供应链管理I中英双语完整版•质量管理体系术语质量管理体系有多少个术语？这些术语用英文怎么表述？你知道其中的多少个？以下收集整理了或许是最全最完整的中英双语版质量管理体系术语，跟着一起来学习吧〜1.receipt:（入厂）接受，验收，进货2.handling :搬运3.packaging :包装4.storage :保存5.protection :保护parison :比较7.identification :标识8.replacement of identification mark 标识标志更换9.maintenance of identification :标识的保持10.records of identification control ：标识控制记录11.tender :标书12.normative document :标准文件13.supplemental :补充14.nonconforming product :不合格品15.control of nonconformingproduct :不合格品控制16.control procedure of nonconforming products :不合格品控制程序17.tendency of nonconformance :不合格倾向18.purchasing :采购19.verification of purchased product 采购的产品验证20.purchasing process :采购过程21.purchasing control procedure :采购控制程序22.purchasing information ：采购信息23.reference standard :参照标准24.reference instructions :参照细则25.stockhouse :仓库26.measurement, analysis and improvement :测量，分析和改进27.measurement result :测量结果28.control procedure of monitoring and measuring devices :测量设备控制程序29.planning :策戈I」30.preservation of product :产品保护31.control procedure for maintenance, replacement and records of product identification :产品标识的保持，更换及记录控制程序32.procedure for product identification and traceability :产品标识和可追溯性程序33.conformity of product :产品的符合性34.monitoring and measurement of product:产品的监督和测量35.product plan :产品方案36.control procedure for product preservation :产品防护控制程序37.method of product release :产品放行方法38.conformity of product,product conformity :产品符合性39.product realization :产品实现40.planning of product realization :产品实现策划41.product characteristics :产品特性42.input to product requirements :产品要求的输入43.product status :产品状态44.final acceptance of product :产品最后验收45.procedure :程序46.program documents :程序文件47.continual improvement :持续改进48.procedure for continual improvement of quality management system :持续改进质量体系程序49.adequacy :充分性50.storage location :存放地点51.agency personnel :代理人员52.submission of tenders :递交标书53.adjustment :调整，调节54.statutory and regulatory requirements :法律法规要求55.rework, vt :返工56.repair, vt :返修57.subcontractor :分承包方58.annex :附录59.improvement :改进60.mprovement actions :改进措施61.on-the-job training :岗位技能培训62.responsibility of individual department and post :各部门，各岗位职责63.change identification :更改标记64.change order number :更改单编号65.process sheets :工艺单66.process specification :工艺规程67.procedure(process card):工艺规程(工艺卡)68.process characteristics :工艺特性69.Job Description Format :工种描述单70.work environment ：工作环境71.impartiality :公正性72.functional requirements :功能要求73.supplier :供方74.supplier evaluation procedure :供方评价程序75.supplier provided special processes :供方提供的特殊过程76.verification at supplier's premises 供方现场验证77.supply chain :供应链78.criteria for supplier selection, evaluation and re-evaluation :供应商选择、评估和再评估准则munication :沟通80.customer ：顾客81.customer property :顾客财产82.control procedure for customer property ：顾客财产控制程序83.customer feedback :顾客反馈84.Customer Service Contact Form :顾客服务联系表85.customer cummunications :顾客沟通86.customer satisfaction :顾客满意87.statistical analysis of customer satisfaction :顾客满意度统计分析88.customer complaint :顾客投诉89.identificaion of customerrequirements :顾客要求的识别90.management review :管理评审91.records from managementreview :管理评审记录92.management review control procedure :管理评审控制程序93.management representative :管理者代表94.management responsibility :管理职95.specified limits of acceptability :规定的可接受界限96.specified use :规定的用途97.process :过程plexity of processes :过程的复杂性99.monitoring and measurement of processes :过程的监视和测量100.operation of process :过程的运行101.status of processes :过程的状态102.process approach :过程方法103.process controls :过程控制104.process control documents :过程控制文件105.process performance :过程业绩106.appropriateness :合适性107.changes to contractor :合同的更改108.contract review control procedure :合同评审控制程序109.internet sales :互联网销售110.environmental conditions :环境条件111.monogram pragram requirements ：会标纲要要求112.type of activities :活动类型113.infrastructure :基础建设114.infrastructure :基础设施115.fundamentals and vocabulary :基础与词汇116.control of records :记录控制117.technical specificaion :技术规范118.process trace sheet :加工跟踪单119.monitoring and measurement :监视和测量120.monitoring and measuringdevice :监视和测量装置121.control of monitoring and measuring devices :监视和测量装置控制122.check method :检查方法123.frequency of checks :检查频次124.calibration status :检定状态125.inspection and test control procedure :检验和试验控制程序126.identification procedure for inspection and test status :检验和试验状态标识程序127.inspection witness point :检验见证点128.inspection hold point :检验停止点129.buildings :建筑物130.delivery :交付131.post-delivery activities :交付后的活动132.delivery activities :交付活动133.interface :接口134.acceptance of contract or orders :接受合同或定单135.type of medium :介质类型136.experience :经验137.correction action :纠正措施138.Corrective action response time 纠正措施答复时间，纠正措施响应时间139.management procedure forcorrective actions :纠正措施管理程序140.corrective action response times : 纠正措施响应时间141.development activity :开发活动142.traceability mark :可追溯性标志143.objectivity :客观性144.Customer Service Log :客户服务记录簿145.control feature :控制特性，控制细节146.control features :控制细则147.periodic assessment of stock :库存定期评估148.justification :理由149.routine :例程，惯例，常规150.internal communication :内部沟通151.internal audit :内部审核152.internal audit procedure :内部审核程序153.internally controlled standard :内控标准154.internal audit :内审155.results of internal and external audits :内外部审核结果petence :能力157.training :培训158.training needs :培训需要159.evaluate :评价160.records of the results of the review :评审结果的记录161.review output :评审输出162.review input :评审输入163.Purchase Requisition :请购单164.authority :权限165.validation :确认166.concession :让步167.human resources :人力资源168.job training of personnel :人员岗位培训169.qualification of personnel :人员资格170.equipment control procedure :设备控制程序171.device type :设备类型172.order of design changes :设计更改通知单173.design and development control procedure :设计和开发控制程序174.design and development :设计开发175.design and development planning :设计开发策划176.control of design and development changes :设计开发更改控制177.design and development review : 设计开发评审178.design and development validation :设计开发确认179.design and development outputs :设计开发输出180.design and development inputs 设计开发输入181.design and development verification :设计开发验证182.design validation :设计确认183.design documentation :设计文件编制184.design acceptance criteria :设计验收准则185.design verification :设计验证186.audit program :审核大纲187.conduct of audits :审核行为188.audit criteria :审核准则189.production process control :生产过程控制190.production process controlprocedure :生产过程控制程序191.production and serviceprovision :生产和服务提供192.control of production and service provision :生产和服务提供的控制193.validation of processes for production and service provision :生产和服务提供过程的确认194.production order :生产令195.identification and traceability :识别和可追溯性196.identification and traceability maintenance and replacement :识别和可追溯性维护与替换197.invalidate :使失效198.market survey :市场调研199.suitability :适宜性200.scope :适用范围201.controlled condition :受控状态202.terms and definitions :术语与定义203.analysis of data ：数据分析204.sequence :顺序205.transfer of ownership :所有权转移206.system document :体系文件207.statistical technique :统计方法208.outsource(vt) a process :夕卜包过程209.external source :外部来源210.documents of external origin :夕卜来文件211.outsource, vt :外协212.unique identification :唯一的标识213.maintenance :维护214.Document Change Control :文件更改控制215.Request For Document Change (RDC):文件更改需求单216.control of documents :文件控制217.documentation requirements :文件要求218.enquiry :问询，询价219.field nonconformity analysis:现场不符合分析220.relevance :相关性。

MSDS范本

Health Effects: Cause irritation of skin,eyes and the respiratory tract. Harmful if
Swallowed or inhaled.
Inhalation: Cause irrtation of respiratory tract.including coughing and shortness
Workplace conditions warrant a respirator’s use.
9.Physical and chemical properties
Appearance: slightly yellow Solubility:100g/L (in 700Cwater)
Odor: Athost odorless Melting Point:N/A
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes.
Remove contaminated clothing and shoes.Get medical attention.
With clothing before reuse.Thoroughly clean shoes before reuse.
ZHEJIANG HONGXIN CHEMICAL MATERIALS CO.,LTD.
Material Safety Date Sheet
Trade name:Nekal BX
Product no.:Nekal BX
Version: 2002/02
Page: 1/3
1.Identification of the substance/preparation and company

DVS系列产品说明书

Series Series O W N E R’S M A N U A LSeriescontentsINTRODUCTION02 PRoDUct DIMensIons 06-07 sAFetY InstRUctIons 02 tecHnIcAL sPecIFIcAtIons 08-09 PRoDUct IDentIFIcAtIon 03 WARRAntY stAteMent 10 stAnDARD AccessoRIes 04 DecLARAtIon oF conFoRMItY 11 InstALLAtIon GUIDeLInes 05IntRoDUctIonDesigned for a wide variety of sound reinforcement applications the Tannoy DVS is an ultra compact loudspeaker system capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail. A truly universal solution, the DVS offers outstanding durability and resistance to scuffs and knocks. Able to deliver consistent performance under a wide range of adverse conditions the DVS is suited to applications indoors or out. Available in black or white the DVS will effectively blend into most backgrounds. Utilisation of the point source loudspeaker allows the DVS to be mounted on a wall or ceiling in either horizontal or vertical orientations without affecting its performance. A range of hardware options ensures simple and effective installation. Also available with built-in line transformer. For applications requiring extended low frequency enhancement, a range of Tannoy sub-bass systems are available and can be used in conjunction with the DVS.sAFetY InstRUctIons1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. The user is responsible for fixing the hardware to the surface to ensure safe operation. The fixings must support the weight of the product – please consult the manual’s specification page for the appropriate weights. Please consult the relevant construction codes in your region for further information on suitable hardware fixing methods.6. Tannoy will not be held accountable for any damage caused by incorrect installation.SeriesPRoDUct IDentIFIcAtIonInPUt connectoRFit rubber grommet to ensure therear of the product is kept sealedstAnDARD AccessoRIesDInKLe seALYoKe BRAcKet(SUPPLIED WITHFIXINGS)SeriesInstALLAtIon GUIDLInes1. Fix the yoke bracket to the surface using asuitable fixing method.2. Feed the speakercable through the rubber grommet then connect the euro-type plug to the wires, observing the correct polarity.3. For connection to the loudspeaker, use pins 1 (+) and 2 (-).Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers ina distributed line.4. Offer the speaker up to the bracket andattach using the thumb screws provided.5. Connect the euro plug then replace the rubber grommet to ensure the speaker is sealed.6. The DVS 4t models are fitted with 30W transformers.THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE.NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOWIMPEDANCE.7. The DVS 6t and DVS 8t models are fitted with 60W transformers.THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100VOLT AMPLIFIER WHILE ITIS SET FOR LOW IMPEDANCE.tecHnIcAL sPecIFIcAtIonsDVs 4 DVs 6 DVs 8 PeRFoRMAnceFrequency Response (-3dB) (1)75Hz - 20kHz 80Hz - 20kHz 75Hz - 20kHzFrequency Range (-10dB) (1)60Hz - 30kHz 65Hz - 30kHz 60Hz - 30kHzSystem Sensitivity (1W @1m) (2) 84dB 88dB 90dBDispersion (-6dB) 110 degrees conical 90 degrees conical 80 degrees conical Transducers Coaxial Coaxial CoaxialLow Frequency 100mm (4.00”) mineral 165mm (6.5”) mineral 200mm (8.00”) mineralloaded cone material loaded cone material loaded cone materialHigh Frequency 20mm (0.79) 20mm (0.79) 20mm (0.79)Crossover 3.9kHz - 2nd order LF, 4.3kHz - 2nd order LF, 3.4kHz - 2nd order LF,2nd order HF 2nd order HF 2nd order HFDirectivity (Q) 6.5 averaged 1kHz to 10kHz 10.6 averaged 1kHz to 10kHz 12.3 averaged 1kHz to 10kHz Directivity (DI) 5.3 averaged 1kHz to 10kHz 9.6 averaged 1kHz to 10kHz 10.0 averaged 1kHz to 10kHzRated Maximum SPL (2)100dB (average) 105dB (average) 108dB (average)106dB (peak) 111dB (peak) 114dB (peak)Power HandlingAverage 40W 60W 70WProgramme 80W 120W 140WPeak 160W 240W 280WRecommended Amplifier Power 80W @ 6 Ohms 120W @ 6 Ohms 140W @ 6 OhmsNominal Impedance 6 Ohms 6 Ohms 6 OhmsDistortion 10% Full Power(4.9V) 2nd Harmonic 3rd Harmonic (6.0V) 2nd Harmonic 3rd Harmonic (6.48V) 2nd Harmonic 3rd Harmonic 250Hz 0.738% 0.772% 0.934% 0.316% 1.86% 0.12%1kHz 0.145% 0.234% 0.292% 0.560% 1.17% 0.54%10kHz 0.070% 0.070% 0.740% 0.050% 1.10% 0.04% Distortion 10% Full Power(5.5V) 2nd Harmonic 3rd Harmonic (1.9V) 2nd Harmonic 3rd Harmonic (2.05V) 2nd Harmonic 3rd Harmonic 250Hz 0.320% 0.311% 0.225% 0.326% 1.86% 0.12%1kHz 0.078% 0.174% 0.082% 0.363% 1.17% 0.54%10kHz 0.087% 0.087% 0.147% 0.066% 1.10% 0.04% constRUctIonenclosure ABS ABS ABSGrille Steel, plated and painted Steel, plated and painted Steel, plated and paintedconnectors Euroblock type removable Euroblock type removable Euroblock type removablelocking connector with locking connector with locking connector withscrew terminals with screw terminals with screw terminals with“loop through” facility “loop through” facility “loop through” facility supplied Accessories Yoke Bracket Yoke Bracket Yoke Bracket Dimensions 277.0 x 170.4 x 165.6mm 340.5 x 212.2 x 216.5mm 451.8 x 290.0 x 296.0mm (H x W x D) (10.91” x 6.71” x 6.52”) (13.41” x 8.36” x 8.52”) (17.79” x 11.42” x 11.65”)net Weight 1.8kg (3.96lbs) 3.1kg (6.83lbs) 5.3kg (11.67lbs)Shipped Weight 5.4kg (11.9lbs) 8.6kg (11.9lbs) 14.6kg (32.16lbs)Packed quantity 2 2 2SeriestecHnIcAL sPecIFIcAtIonsDVs 4tDVs 6tDVs 8ttRAnsFoRMeR VeRsIonstransformer setting Rotary switch Rotary switch Rotary switchTransformer Taps 70V30W / 115W / 7.5W / 3.75W / 60W / 30W / 15W / 7.5W 60W / 30W / 15W / 7.5W & low Impedance operation & low Impedance operation & low Impedance operation100V 30W / 7.5W / 15W & 60W / 30W / 15W &60W / 30W / 15W &low Impedance operation low Impedance operation low Impedance operation net Weight 2.3kg (5.07lbs) 4.1kg (9.03lbs) 6.3kg (13.88lbs)Shipped Weight6.2kg (13.66lbs) 10.6kg (23.35lbs) 16.6kg (36.56lbs)Packed quantity222Notes(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamberA full range of measurements, performance data, and Ease™ Data can be downloaded from Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal orexceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.WARRAntYno maintenance of the DVs loudspeaker is necessary.All of our products have been produced and tested with care and precision to give first-class service.All passive components are guaranteed for a period of five years from the date of purchase from an authorised Tannoy dealer subject to the absence or evidence of misuse, overload, or accidental damage.If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage.If you suspect a problem with a Tannoy product then, in the first instance, discuss it with your Tannoy dealer. If you require further assistance then we ask that you deal directly with your local Tannoy distributor. If you cannot locate your distributor please contact Customer Services, Tannoy Ltd at the address given below.Customer Services, Tannoy Ltd., Rosehall Industrial Estate, Coatbridge, Strathclyde ML5 4TF, ScotlandTelephone: 01236 420199 (National)+44 1236 420199 (International)Fax: 01236 428230 (National)+44 1236 428230 (International)E-mail: **************************************Service Info, TC Group AmericasTelephone: (800) 565-2523 (toll free)(519) 745-1158Fax: (519) 745-2364E-mail: ************************Web: Do not sHIP AnY PRoDUct to tAnnoY WItHoUt PReVIoUs AUtHoRIsAtIonPLeAse note: In order to direct you to the appropriate service facility a return authorization and instructions must be issued in advance- do not send any equipment to any Tannoy or TC Group Americas facility without prior authorization or it will be refused. In some cases a local service facility can be recommended.Our policy commits us to incorporating improvements to our products through continuous researchand development. Please confirm current specifications for critical applications with your supplier.DVS OWNER MANUAL_011Series DecLARAtIon oF conFoRMItY The following apparatus is manufactured in China for Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate as intended, and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation as specified and intended.Details of the Apparatus:Tannoy Contractor Loudspeaker Model number: DVS Associated technical File:EMCi6Applicable standards: EN 50081-1 Emission EN 50082-1 Immunity signed:Position: Director of Engineering Date:19th Jan. 11012_ DVS OWNER MANUAL Tannoy adopts a policy of continuous improvement and product specification is subject to change.6481 0584 / 1111Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E:********************TCGI (ROW sales) T: 00 45 8742 7000 E:******************************TCGA (Americas sales) T: 00 1 (519) 745 1158 E:*************************Tannoy Middle East T: 00 971 (04) 4401208 E:********************。

产品标识与可追溯性管理程序(中英文)

产品标识与可追溯性管理程序Product id entification and traceability management procedure（IATF16949-2016）1.目的 Objective为能控制从原材料到成品出货的整个流程的质量状况及其追溯性，对各制程的产品标识追溯予以控制，特制定本程序。

To control the quality conditions and related traceability from the raw material to the final product delivery to ensure the product identification and traceability are under control.2.适用范围 Applicable Scope本程序适用于所有在公司范围内的原材料、半成品和成品的标识及追溯均适用本程序。

Be applied to the identification and traceability of the raw material, semi-finished product and finished product in our company.3. 职责Responsibilities3.1. 生产部：负责在线产品和生产过程中原材料、半成品、成品状态的标识储存及保护。

Production department: identify, store and protect the online productsand raw material, semi-finished product, finished product.3.2. 品质部：负责成品、半成品、不良品、原材料等对不同检验和试验状态的产品进行标识。

Quality department: identify the products of different inspection and test status.3.3. 仓管部：负责原材料和成品入库的标识、保护以及出入库时都有明显的标识和记录。

PDA_TR28 中英无菌原料药工艺模拟验证(2006年)

无菌原料药（BPCs）的工艺模拟PDA第28份技术报告（2006年）This document provides guidance relative to the validation of aseptic processing activities associated with the production of sterile bulk pharmaceutical chemicals. It draws upon the concepts and principles developed in PDA's and PhRMA's prior publications on aseptic processing technology (1, 2, 3). This effort expands upon those documents to provide assistance for individuals and firms producing sterile bulk pharmaceutical chemicals. Our goal in this revision was to update the document to reflect 6 years of industry experience with it, as well as an acknowledgement of acceptance criteria limitations that were present in the first edition (4). We have also endeavored to address some of the issues raised by FDA in their review of the earlier edition.本文档提供了无菌原料药生产加工有关的验证指导。

基础产品标识标注规定-basic

11
冒用他人产品标识
Using other producers’ identification
伪造原产地证明
Falsify origin certificate
12
非法变更生产日期，延长保质期
Illegal change production date, extend the shelf life.
1
基本要求
BASIC REQUIREMENTS
1.除产品使用说明书外，产品标识应当标注在产品或者产品的销售包装上。产品或者产品销售包装的最大表面的面积小于10平方厘米的，在产品或者产品销售包装上可以仅标注产品名称、生产者名称
In addition to the product manual, product identification shall be marked on the sales products or product packaging. If the largest surface area of product or product sales packaging less than 10 square centimeters, we can only label the product name and producer name on the packaging of products or sales product
产品及产品包装信息的基本要求
The basic requirements for products and product packaging information
（参:中华人民共和国产品质量法；产品标识标注规定）
Reference: The Product Quality Law of the People's Republic of China; Product Marking Regulation

2006年监管证件名称代码表说明

2006年监管证件名称代码表说明一、监管证件名称代码监管证件名称代码，是海关依据我国外贸法律、法规及规章，为便于实施计算机系统管理和便捷通关需求，对实行进出口许可证件管理的货物在海关通关环节须验核的各种进出口许可证件的分类标识。

监管证件代码监管证件名称1----进口许可证2----两用物项和技术进口许可证3----两用物项和技术出口许可证4----出口许可证5----纺织品临时出口许可证6----旧机电产品禁止进口7----自动进口许可证8----禁止出口商品9----禁止进口商品A----入境货物通关单B----出境货物通关单D----出/入境货物通关单(毛坯钻石用)E----濒危物种出口允许证F----濒危物种进口允许证G----两用物项和技术出口许可证（定向）I ----精神药物进(出)口准许证J ----金产品出口证或人总行进口批件O----自动进口许可证(新旧机电产品)P----进口废物批准证书Q----进口药品通关单S----进出口农药登记证明T ----银行调运外币现钞进出境许可证W----麻醉药品进出口准许证X----有毒化学品环境管理放行通知单Y----原产地证明Z----进口音像制品批准单或节目提取单a----请审查预核签章e----关税配额优惠税率进口棉花配额证s----适用ITA税率的商品用途认定证明t----关税配额证明r ----预归类标志u----进口许可证(加工贸易,保税)x----出口许可证(加工贸易)y----出口许可证(边境小额贸易)二、监管证件名称代码简要说明（一）代码“1”----进口许可证：指商务部配额许可证事务局或其授权机关签发的进口许可证。

（二）代码“2”----两用物项和技术进口许可证：指列入《两用物项和技术进口许可证管理目录》的商品，进口时由商务部签发的《两用物项和技术进口许可证》。

（三）代码“3”----两用物项和技术出口许可证：根据商务部会同海关总署联合发布《两用物项和技术进出口许可证管理目录》，凭商务部签发的两用物项和技术出口批复到商务部授权的发证机构领取两用物项和技术出口许可证。