德国菲斯特转子秤备件维护2015.08
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Radial Gasket at the Drive Shaft
驱动轴密封
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Rubber Sleeve for the Inlet 进口处橡胶套
粉从破损的过滤膜片回窜。
check valve
check air permeability of sinter plates 检查过滤膜片气体的通过性 recommended pressure at 2 bar 建议压力2bar.
Q3 normally controlled by impulse/pause, occasionally permanent
加工和更换转子密封板时都要对耐磨 套进行检查
Anti Wear Insert 耐磨衬套
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Standard lifetime approx. 2-3 years 通常运行2-3年，再加工
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Minimum wear on the Rotor Wheel and the upper/lower Plates - NOT comparable with DRW for coaldosing 密封板及转子磨损率极低，这是DRW煤粉秤所无法比拟的
recommend exchange every 1-2 years 建议每1-2年进行更换
Overview Spare and Wear Parts 易耗件总览
Damage of check valves possible if coal powder will go back through damaged sinter plates 单向阀的损坏，可能是由于煤
Mr. Philippe Cartier of M/s. SCAIME
DOSING to PERFECTION
FLSmidth-Pfister Seminar – Qingdao Spart Parts of Pfister weighfeeders
菲斯特转子秤备件维护
马淑娟 13708983306
艾法史密斯机械（青岛）有限公司—德国菲斯特青岛分公司
DRW and FRFra Baidu bibliotek – Animation
Pfister DRW
Pulverized Fuels DRW 粉状燃料
- Hardcoal 硬煤 - Lignite 褐煤 - Petrolcoke石油焦碳 - Oil Shale 油页岩
Pfister FRW
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Round Cord in the Groove of the Plates
Overview Spare and Wear Parts 易耗件总览
Powdered Materials FRW 粉状物料
- Raw Meal生料 - Fly Ash 粉煤灰 - Kiln Dust 窑废渣 - Cement 水泥
AGENDA Maintenance Seminar 会议目录
1. Overview of the relevant Spare and Wear Parts 相关备件及易耗件介绍 2. Important Electronic Spare Parts of the C-Series C系列主控制器的主要电气件 3. Genuine Pfister Spare Parts vs. Fake Parts 原装菲斯特件与仿冒件比较 4. “Professional Rework” of sealing plates and rotor 转子密封板的“专业再加工” 5. Technical Check by means of the Serial no. 通过设备序列号完成对设备的技术核对 6. Spare part sales and service frame contract 备件与售后服务一体式的大客户合作体系
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
The wrong installation make parts broken soon 错误安装方式导致备件快 速破损
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
The wrong installation make parts broken soon and dosing not accurate. 金属膨胀节的错误安装方式
Rotor Cellular Wheel转子小格室
Depend on取决于： 1. material characteristics 物料材质 2. foreign particles in the coal 杂质
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Sealing Kits for Slidegate and Cylinder
闸板阀及气缸密封
Sealing Kits for all gates available incl. handling tools 全套闸板阀密封含有操作工具
flexible joints cure 软连接 exchange requested at least
after 5-7 years operation 设备运行5-7年后，一定要进行更换
Rubber Compensator 橡胶膨胀节
wear protection to be checked at each machining or exchange of plates/wheel
Mostly caused by wrong adjustmentof the flap(air distribution) and Gap > 0,3 mm 磨损最主要原因是风速过大或间
隙＞0.3mm
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
The wrong installation make scales dosing not accurate. 错误的安装方式导致秤计 量不准
Solenoid Valve 5/2 Way make shut off gate works well. 二位五通阀可使闸板阀正常工作
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Inlet Compensator 进口膨胀节
Inlet Compensator for reliable weighing results 进口膨胀节确保设备称量准确
Overview Spare and Wear Parts 易耗件总览
flexible joint (compensator) is used to compensate installation tolerances
Weighing equipment MUST be free from all static elements as ground / floor etc. 称重系统必须脱离地面或各种支撑
allowed tolerances must be respected
Q3
refer to Mounting Instr. 550.096.60.04 MA chapter 2.6
Filter with gasket for aeration 助流系统中的过滤膜片
reliable material flow from the silo into the feeder depends on a proper functioning aeration
煤粉仓下料是否稳定取决于助流系统是否正常工作
regulars exchange of sealing prevents the environment from dust 通常在更 换密封时尽量避免环境内的灰尘
Overview Spare and Wear Parts
Wear Parts of the DRW for Pulverized Fuels 易耗件 Solenoid Valve 5/2 Way 闸板阀用二位五通阀
软连接用于补偿安装的偏差
NON weighing equipment, based to ground / floor / etc. 有地面支撑的物体不会被计量在内
FLEXIBLE connection to SEPERATE Weighing equipment from NON weighing equipment 软联接就是把称重部分和非称重 部分分开
Overview Spare and Wear Parts易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Wear especially coming from the inner chamber air stream 磨损因为转子室的空气过大
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Shaft Sealing Kit 骨架密封
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
high accuracy parts for correct gap adjustment
高质量备件可使间隙调整的更好
Sealing Plate Upper/Lower 上下密封板
correct gap adjustment for reliable accuracy and minimized wear 正确的间 隙调整可确保设备运行稳定及降低磨损
Overview Spare and Wear Parts
Wear Parts of the DRW for Pulverized Fuels
适用于粉状燃料的DRW秤的易耗件介绍
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Blow-Off Nozzle 出料头
depend on取决于： 1. Material characteristics 物料材质
2. Air speed in total 风机风速 3. Air distribution 气流方向
Standard lifetime
approx. 2-3 years 通常寿命为2-3年
驱动轴密封
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Rubber Sleeve for the Inlet 进口处橡胶套
粉从破损的过滤膜片回窜。
check valve
check air permeability of sinter plates 检查过滤膜片气体的通过性 recommended pressure at 2 bar 建议压力2bar.
Q3 normally controlled by impulse/pause, occasionally permanent
加工和更换转子密封板时都要对耐磨 套进行检查
Anti Wear Insert 耐磨衬套
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Standard lifetime approx. 2-3 years 通常运行2-3年，再加工
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Minimum wear on the Rotor Wheel and the upper/lower Plates - NOT comparable with DRW for coaldosing 密封板及转子磨损率极低，这是DRW煤粉秤所无法比拟的
recommend exchange every 1-2 years 建议每1-2年进行更换
Overview Spare and Wear Parts 易耗件总览
Damage of check valves possible if coal powder will go back through damaged sinter plates 单向阀的损坏，可能是由于煤
Mr. Philippe Cartier of M/s. SCAIME
DOSING to PERFECTION
FLSmidth-Pfister Seminar – Qingdao Spart Parts of Pfister weighfeeders
菲斯特转子秤备件维护
马淑娟 13708983306
艾法史密斯机械（青岛）有限公司—德国菲斯特青岛分公司
DRW and FRFra Baidu bibliotek – Animation
Pfister DRW
Pulverized Fuels DRW 粉状燃料
- Hardcoal 硬煤 - Lignite 褐煤 - Petrolcoke石油焦碳 - Oil Shale 油页岩
Pfister FRW
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Round Cord in the Groove of the Plates
Overview Spare and Wear Parts 易耗件总览
Powdered Materials FRW 粉状物料
- Raw Meal生料 - Fly Ash 粉煤灰 - Kiln Dust 窑废渣 - Cement 水泥
AGENDA Maintenance Seminar 会议目录
1. Overview of the relevant Spare and Wear Parts 相关备件及易耗件介绍 2. Important Electronic Spare Parts of the C-Series C系列主控制器的主要电气件 3. Genuine Pfister Spare Parts vs. Fake Parts 原装菲斯特件与仿冒件比较 4. “Professional Rework” of sealing plates and rotor 转子密封板的“专业再加工” 5. Technical Check by means of the Serial no. 通过设备序列号完成对设备的技术核对 6. Spare part sales and service frame contract 备件与售后服务一体式的大客户合作体系
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the FRW for Powdered Materials 称量粉状物料的FRW秤易磨件
The wrong installation make parts broken soon 错误安装方式导致备件快 速破损
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
The wrong installation make parts broken soon and dosing not accurate. 金属膨胀节的错误安装方式
Rotor Cellular Wheel转子小格室
Depend on取决于： 1. material characteristics 物料材质 2. foreign particles in the coal 杂质
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Sealing Kits for Slidegate and Cylinder
闸板阀及气缸密封
Sealing Kits for all gates available incl. handling tools 全套闸板阀密封含有操作工具
flexible joints cure 软连接 exchange requested at least
after 5-7 years operation 设备运行5-7年后，一定要进行更换
Rubber Compensator 橡胶膨胀节
wear protection to be checked at each machining or exchange of plates/wheel
Mostly caused by wrong adjustmentof the flap(air distribution) and Gap > 0,3 mm 磨损最主要原因是风速过大或间
隙＞0.3mm
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
The wrong installation make scales dosing not accurate. 错误的安装方式导致秤计 量不准
Solenoid Valve 5/2 Way make shut off gate works well. 二位五通阀可使闸板阀正常工作
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Inlet Compensator 进口膨胀节
Inlet Compensator for reliable weighing results 进口膨胀节确保设备称量准确
Overview Spare and Wear Parts 易耗件总览
flexible joint (compensator) is used to compensate installation tolerances
Weighing equipment MUST be free from all static elements as ground / floor etc. 称重系统必须脱离地面或各种支撑
allowed tolerances must be respected
Q3
refer to Mounting Instr. 550.096.60.04 MA chapter 2.6
Filter with gasket for aeration 助流系统中的过滤膜片
reliable material flow from the silo into the feeder depends on a proper functioning aeration
煤粉仓下料是否稳定取决于助流系统是否正常工作
regulars exchange of sealing prevents the environment from dust 通常在更 换密封时尽量避免环境内的灰尘
Overview Spare and Wear Parts
Wear Parts of the DRW for Pulverized Fuels 易耗件 Solenoid Valve 5/2 Way 闸板阀用二位五通阀
软连接用于补偿安装的偏差
NON weighing equipment, based to ground / floor / etc. 有地面支撑的物体不会被计量在内
FLEXIBLE connection to SEPERATE Weighing equipment from NON weighing equipment 软联接就是把称重部分和非称重 部分分开
Overview Spare and Wear Parts易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Wear especially coming from the inner chamber air stream 磨损因为转子室的空气过大
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Shaft Sealing Kit 骨架密封
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
high accuracy parts for correct gap adjustment
高质量备件可使间隙调整的更好
Sealing Plate Upper/Lower 上下密封板
correct gap adjustment for reliable accuracy and minimized wear 正确的间 隙调整可确保设备运行稳定及降低磨损
Overview Spare and Wear Parts
Wear Parts of the DRW for Pulverized Fuels
适用于粉状燃料的DRW秤的易耗件介绍
Overview Spare and Wear Parts 易耗件总览
Wear Parts of the DRW for Pulverized Fuels 易耗件
Blow-Off Nozzle 出料头
depend on取决于： 1. Material characteristics 物料材质
2. Air speed in total 风机风速 3. Air distribution 气流方向
Standard lifetime
approx. 2-3 years 通常寿命为2-3年